ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
not working
root method is not working......
just check dude
sp flash method is working...
hats off gor u r work dude...
in gingerbread we dont have sd-extn so its not mounting...
lets begin for custom rom development
karthiksitian said:
root method is not working......
just check dude
Click to expand...
Click to collapse
okk I will double check it. In mean time you can try non-rooted method, I will definitely work...
d you have the original recovery?
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
still sd-ext is not working
karthiksitian said:
still sd-ext is not working
Click to expand...
Click to collapse
what's the error you are getting in CWM while mounting sd-ext or taking nandroid backup...
Have you installed link2sd for mount script??
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
see #1 post...
When I tried to flash cmw so toll shows a Eboot error 16008 help
worked
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
now i can control my phone
rooted and istall cwm
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
{
}
RECOVERY 0xFC0000
{
}
Click to expand...
Click to collapse
Is there anybody who got a Micromax A25 unbricked?
pretty easy...
mail me @ [email protected]
i will tell u in detailed....
need Stock rom of Micromax Smarty a25
vasukinv said:
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
Is there anybody who got a Micromax A25 unbricked?
Click to expand...
Click to collapse
Any one please could you upload Stock rom of mmx a25,,, i flashed another rom in this and got my device bricked,,,
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
i think i have got semi bricked phone ....micromax a25
it is detected by computer and make us port..
as the steps mentioned by u i launch flash tool ----> load scatter file ---->then disable da download all.--->
then it gives me error that recovery image is not in valid da format...
do iam doing something wrong...
thanxx
thanxx,sp flash tool is workin and that mobile uncle hangs and doesn't work.
1.any custom rom for micromax a25
2.any supportable cwm recovery for micromax a100
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
the recovery is likely to be original ,but works great b'coz of this i flashed micromax a52 custom roms and it worked for me
Please help!
Root method is not working. I am unable to install cwm through mobileuncle tools. :crying:
install it via sp flash tool
Sent from my A25 using Tapatalk 2
no one replys here
Press thanx if liked !
Click to expand...
Click to collapse
Can any one help?
my device is also semi brocked now i want to flash stock rom but sp ft gives me BROM error
so can any one tell me how to put this phone in bootrom mode?
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.
Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.
Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.
Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.
I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10
MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.
Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.
Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!
Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver
SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Sudeep Duhoon said:
Procedure:
1. Download and install MTK VCOM drivers.
Problem in installation?? Go here
2. Open SP flash tools and go to read back tab. (alternative download link of sp flash tools)
3. Click 'Add' and tap on added read back entry.
4. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
5. Click on read back and connect phone without battery. Wait till it completes.
6. Once you see a green circle, close sp flash tools and switch on the phone.
7. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
8. Go back and enter developers options(in settings), and check usb debugging on.
9. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
10. In mtk droid tools, click 'root, backup and recovery' tab.
11. Click 'To process file ROM_ from Flash Tool.
12. Locate the file you got from read back.
13. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
14. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
1) we have to load scatter file first right?
2) how huch time it takes to readback?
codergenius said:
1) we have to load scatter file first right?
2) how huch time it takes to readback?
Click to expand...
Click to collapse
Oops, sry. That was added from day one in my pc so forgot.
Added scatter now.
About 5 mins.
anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed
green circle
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse
Green circle
Zao, it worked for me after putting in the battery. The flash_tools hanged for a minute then automatically started backing up.
Regards,
Abhishek
MTK specific apps
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
i am facing some problem with preloader.....please guide me through.........
kanishka singh said:
i am facing some problem with preloader.....please guide me through.........
Click to expand...
Click to collapse
What problem? Explain a bit.
eagledipesh said:
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom
Click to expand...
Click to collapse
Here is the stock rom. Yes it is kitkat.
http://support.moulnisky.com/index.php?dir=Micromax/
zao.remy said:
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.........................Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse
A pop up will come when it will finish. On center of the sp flash tools.
codergenius said:
anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed
Click to expand...
Click to collapse
Try using usb deview to uninstall and reinstall the drivers or try changing the com port from sp flash tools itself or try any other pc.
Click to expand...
Click to collapse
i did it before rooting my phone...the process still remains the same...????
bladehunter said:
i did it before rooting my phone...the process still remains the same...????
Click to expand...
Click to collapse
Yes
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process
saikiransama said:
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process
Click to expand...
Click to collapse
Not necessary, but highly recommend.
wat will be the approx size of the read back file ?
Scaning USB port failed!
Hi OP, plz help me out
M not able to readback following only this guide, getting the below error in logs:
"07/12/2014 19:40:39.305 FlashTool[8032][5132][D]: APCore::ConnMediaUSB:reConnect(): Scanning USB port...(..\QT_FlashTool_Refactor\Conn\ConnMedia.cpp,53)
07/12/2014 19:40:59.801 FlashTool[8032][8372][D]: FileUtils::CheckDirectory(): FileUtils::CheckDirectory(): the dir(C:\ProgramData\SP_FT_Logs) already exists.(..\QT_FlashTool_Refactor\Utility\FileUtils.cpp,44)
07/12/2014 19:41:09.407 FlashTool[8032][5132][D]: USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)"
can U plz let me know what possibly can be the reason for this error?
MTK droid tools 253 is not identifying the UNite 2 8GB model. What went wrong?
SOLVED - HAD TO WAIT FOR AROUND A MINUTE FOR THE FIRST TIME.
Problem with 8GB version
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.
Rooted succesfully with u r method
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:
Sakthihari said:
wat will be the approx size of the read back file ?
Click to expand...
Click to collapse
512kb or 512b, i don't remember if that was in kb or b.
akash.gpta said:
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.
Click to expand...
Click to collapse
Click download and then connect the phone, it will not get removed.
Niraj251 said:
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:
Click to expand...
Click to collapse
Press thanx, don't say it.
bootloop after flashing A rom