KARBONN TITANIUM S20 deVLEOPmENT - General Topics

HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST

Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!

Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA

Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share

Related

[ROOT] Guide For Rooting myPhone A818

The credit does not goes to me.
It goes to SuperGuko of symb.ph
You can say thanks to me anyways.
I AM NOT RESPONSIBLE IF YR BLASTS OR WHATEVER HAPPEN
YOUR WARANTY AND BRAIN IS NOW VOID.
What is Rooting and its benefits? —its like jailbreaking but its your Android phone, unlocking the capabilities of your Android device with the apps and tweaks that requires root access to the Android system. Its not necessary but if time came and you realized that you need to root your phone, then it must be it.
What is CWM recovery? – cwm is short for clock work mod recovery. All Android phones have recovery mode already but clock work mode is better and you can do more with CWM, like installing patches, updates, and tweaks on your device.
Rooting myPhone A818
First, you must download these files:
SP Flash Tool — extract once downloaded. This is the app used for flashing an Android phone.
http://www.mediafire.com/?dridzg1tdokf2up
MT65x3 USB VCOM drivers –extract then install. We need these drivers so that the phone will be read by the SP Flash Tool once connected to the PC.
http://www.mediafire.com/?9wi60a5dtst2aw6
CWM based Recovery –this is the working CWM recovery (recovery.img) for the myPhone A818
http://www.mediafire.com/?jt482l02ls8kl4h
MT6573_Android_scatter.txt –we need this scatter text file.
http://www.mediafire.com/view/?tkizuj24vntmt9r
Root A818 –update file for rooting the A818.
http://www.mediafire.com/?kmbkj29lccsaili
Steps
Once the drivers are properly installed and the SP Flash Tool is already extracted and accessible, turn off your myPhone A818 and remove its battery.
Run SP Flash Tool.
Click the Scatter-loading button and navigate to the downloaded MT6573_Android_scatter.txt file.
Be sure that the RECOVERY is the only one selected, click on it and browse on the downloaded recoveryNonTouch.img file.
Click the Download button and just ignore the warnings.
Attach the battery again and connect the phone, be sure not to turn it on yet.
Wait for the process to complete. You will see a Green Circle with a label saying download okay. Normally, this process doesnt takes too much time and not more than 5 minutes as you were just writing a small-size recovery.img file.
How to enter into CWM recovery
Be sure that your phone is turned off.
Press Volume up + Volume down and power button until a set of choices appears then just press the up button to enter recovery.
With the CWM recovery, you can easily make a full back-up of your phone. This is as well called as Nandroid back-up. Just be sure you have enough storage on your SD card. Just select Select backup and restore, then choose back up and wait for it to finish.
How to root myPhone A818
Copy the RootA818.zip file on your SD card.
Enter CWM recovery.
Select install zip from sdcard, choose zip from sdcard, then locate RootA818.zip.
Select Reboot system now.
To know verify if the rooting process is a success, look for the SuperUser app in your drawer, or just check root access with the Root Checker app from the PlayStore.
Enjoy!
REFERENCE: http://www.symbianize.com/showthread.php?t=851383

[ROOT] Guide For Rooting myPhone A818

The credit does not goes to me.
It goes to SuperGuko of symb.ph
You can say thanks to me anyways.
I AM NOT RESPONSIBLE IF YR BLASTS OR WHATEVER HAPPEN
YOUR WARANTY AND BRAIN IS NOW VOID.
What is Rooting and its benefits? —its like jailbreaking but its your Android phone, unlocking the capabilities of your Android device with the apps and tweaks that requires root access to the Android system. Its not necessary but if time came and you realized that you need to root your phone, then it must be it.
What is CWM recovery? – cwm is short for clock work mod recovery. All Android phones have recovery mode already but clock work mode is better and you can do more with CWM, like installing patches, updates, and tweaks on your device.
Rooting myPhone A818
First, you must download these files:
NOTE IF ANY DOWNLOAD IS HAVING ERROR THEN download it urself using google
SP Flash Tool — extract once downloaded. This is the app used for flashing an Android phone.
http://www.mediafire.com/?dridzg1tdokf2up
MT65x3 USB VCOM drivers –extract then install. We need these drivers so that the phone will be read by the SP Flash Tool once connected to the PC.
http://www.mediafire.com/?9wi60a5dtst2aw6
CWM based Recovery –this is the working CWM recovery (recovery.img) for the myPhone A818
http://www.mediafire.com/?jt482l02ls8kl4h
MT6573_Android_scatter.txt –we need this scatter text file.
http://www.mediafire.com/view/?tkizuj24vntmt9r
Root A818 –update file for rooting the A818.
http://www.mediafire.com/?kmbkj29lccsaili
Steps
Once the drivers are properly installed and the SP Flash Tool is already extracted and accessible, turn off your myPhone A818 and remove its battery.
Run SP Flash Tool.
Click the Scatter-loading button and navigate to the downloaded MT6573_Android_scatter.txt file.
Be sure that the RECOVERY is the only one selected, click on it and browse on the downloaded recoveryNonTouch.img file.
Click the Download button and just ignore the warnings.
Attach the battery again and connect the phone, be sure not to turn it on yet.
Wait for the process to complete. You will see a Green Circle with a label saying download okay. Normally, this process doesnt takes too much time and not more than 5 minutes as you were just writing a small-size recovery.img file.
How to enter into CWM recovery
Be sure that your phone is turned off.
Press Volume up + Volume down and power button until a set of choices appears then just press the up button to enter recovery.
With the CWM recovery, you can easily make a full back-up of your phone. This is as well called as Nandroid back-up. Just be sure you have enough storage on your SD card. Just select Select backup and restore, then choose back up and wait for it to finish.
How to root myPhone A818
Copy the RootA818.zip file on your SD card.
Enter CWM recovery.
Select install zip from sdcard, choose zip from sdcard, then locate RootA818.zip.
Select Reboot system now.
To know verify if the rooting process is a success, look for the SuperUser app in your drawer, or just check root access with the Root Checker app from the PlayStore.
Enjoy!
REFERENCE: http://www.symbianize.com/showthread.php?t=851383
STILL HAVING TROUBLE SEE THIS [urlhttp://forum.xda-developers.com/showthread.php?p=38365926#post38365926][/url]

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.
Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.
Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.
Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.
I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10
MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.
Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.
Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!
Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver
SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....

CWM for all mtk devices ... (karbonn,xolo,lenovo,micromaxx,maxx,iball.lawa,and more)

cwm for all mtk . via mtkdroid toool
A rooted mtk65xx phone
mtk65xx Drivers
MtkDroidTools (latest preferred)
Original Rom
MTK MobileUncle Tools app (PlayStore)
step 1
you will need to extract the boot.img from the stock rom of your phone.
step 2
connect ur device with usb debugging on .. with usb data cable
step 3
now open adb terminal
and type adb devices
if devices detected go to next step
if devices not detected install adb driver using moboginiee
step 4
Open the root, backup, recovery tab and click on "To choose the boot.img file". Leave all the rest as they are. Then click on Recovery and Boot and select the boot.img we got earlier from the phone's Stock Rom.
step 5
A prompt will appear and there choose YES. A few seconds later, you will see task complete. Go back to the MTKdroidTools folder and you will see a new folder called recovery. Inside, you have two files. Take the one with the word recovery and place it in the root of your phone’s SD card (not in any folder).
From here on we work with the phone.
Open MobileUncle Tools and go to the Recovery Update. You should see the recovery you placed in your SD card. Select it and click on OK.
Finally, choose reboot to Recovery. If all was done correctly, your phone should boot into your new cwm recovery.
if i help u hit thanksssssss
download link in txt file attachment just copy from it and download

[GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111

Hi good day to all am RJ am going to guide how to ROOT / FLASH RECOVERY in Micro max Canvas A111 jb4.1.2
WARNING: If your Micromax Canvas A111 smartphone gets bricked or gets damaged while following the tutorial given below, we shouldn’t be held responsible. Proceed at your OWN RISK.
I will try to keep this guide up to date. Please let me know if you find something wrong or missing
Content:
1) Introduction
2) How to root
3) How to flash recovery
4) FAQs (ADB, Loki, Download Mode, Go to Recovery etc.)
5) Troubleshooting (unbricking)
1) Introduction:
Micromax Canvas Doodle a111 is a 3G Android smartphone with a 5-inch TFT HD Touchscreen display. The phone is powered with 1.2 GHz Quad-Core Processor and it runs on Android 4.1.2 Jelly bean OS. With 8 mega pixel rear view camera, the phone offers high quality image capturing. If you are looking for a smartphone under 10000 INR with good features, then Micromax Canvas A111 would be the ideal choice!
If you are a user of Micromax Canvas Doodle a111 and would like to gain root access for installing rooted apps or custom ROM’s, then the following tutorial will help you. I have given step by step instructions for rooting A111 smartphone below
2) How to root:
Prerequisites To Root Micromax Canvas A111 Smartphone​1. Take complete backup of your personal data in the Micromax device using appropriate apps. Although the root process won’t affect them, its safe to keep a backup.
2. Remove all the Antivirus applications installed on your smartphone for virus protection since sometimes they will cause trouble while the rooting process is going on.
3. Charge your phone battery and keep its backup level above 80% as the rooting process drains the battery. If you don’t have enough battery backup and your device gets switched off during the rooting, then surely it will get bricked. Avoid it by having a good battery backup.
4. ***Enable USB Debugging mode in your device by following the path: Settings -> Developer Option -> USB Debugging.
5. *** Make sure you have drivers for your phone Download from here http://www.androidrootguide.com/micromax-usb-driver-download-get-drivers-micromax-smartphones
Once you have done all the above mentioned tasks, you can move on to the rooting tutorial given below.
download any one application from bellow links
1. For VROOT :: click here
2. For Root Genius:: click here
Tutorial To Root Micromax Canvas A111
> To get started, download VROOT / Root Genius from bellow link and install it on your computer. Once installed, open the application.
> Now connect your Micromax Canvas A111 smartphone to the computer using the “USB Debugging Mode”. If you have installed the required USB drivers for your phone on the computer, then the VROOT application will automatically detect your smartphone.
> Now just click on the “Root” button shown on the VROOT / Root Genius window and let the rooting process begin. The smartphone will get restarted several times during the process. So, don’t panic. Once the rooting process is finished, the device will reboot for one more time.
> Thats it. Now you have successfully rooted your Micromax Canvas A111 smartphone. If you want to confirm whether you have successfully rooted or not, use the “Root Checker” app. If you encounter any issues while following this rooting tutorial, do let me know via comments.
****** if u not able to understand the above please click on the Link it will more easy http://rjpraveen.blogspot.in/2014/08/how-to-root-micromax-canvas-doodle-a111.html
3) How to flash recovery:
To install ROM’s and Kernels you need a custom recovery already you learned how to ROOT Device from above information now its the time to use unlocked boot loader to your device k lets move through the part
and
to flash recovery no need root access don't bother if u are rooted or unrooted. if you are unrooted then also you can do it i provide both information for rooted and unrooted users
Things needed before flashing:
1. Proper drivers (see section 1)
2. ADB. There are various ways to get it but don't worry about size and installation i marked it small and easy
3. Required Recovery images(TWRP/CWM/STOCK & MIUI) provided link bellow.
4. Basic Knowledge on PC..
NOTE:: I am not responsible for bricked devices.
Download Recovery image files from billow links
CWM Recovery :: Download the img for your device here
TWRP Recovery :: Download the img for your device here
MIUI Recovery :: Download the img for your device here
STOCK Recovery :: Download the img for your device here
This Step for Rooted Users Only
Download Flashify from Google Play here
(before follow this step please ensure that your battery device has more 50% in case of out of battery during this process)​
1) Use Flashify Application:
This program required Root Permission and it free with limited functioned that can install Custom Recovery 3 times a day. If need more please support dev.
2) Make sure you hit “Allow” when Superuser request window pops up when opening the Flashify app.
3) Choose “Recovery image” for recovery images like CWM or TWRP. (You could even flash stock recovery images and unroot btw.)
4) Next, choose the file you want to install by choosing “Choose a file”.
5) Choose one of the Recovery Download CWM or TWRP or OTHER but I recommended TWRP
6) Browse your storage and choose the IMG file you want to flash.
7) Choose “Yup”. That’s it!
if u want to See more Detailed Information with image presentation click here
This Step for Rooted/NON Rooted Users also
>>>> Download ADB Required files from here
if u want to watch video how to install click here
1> Enable USB debugging mode in ur device
for this(go to setting >> developer Options >> tick usb debugging)
2> Switch off your device and start it in ""fast boot"" mode
for this Switch off device after this
Hold (Volume down + Power Button) both at same time it will show canvas logo with top blue LED above sensor
that's it it means that now your device in fast-boot mode
3> Now connect your mobile to PC with the data cable it will automatically install drivers if not install drivers manually download from above section 1
4> Now get back to PC navigate to download folder it contains 2 folders
1.fast boot files and
2.Recovery Images
now copy recovery which one u want from "Recovery Images" folder to "fast boot files" folder
(stock -- default what MMX device provides)
(CWM/TWRP/MIUI Custom recoverys)
then rename the copied file with name "recovery"
5> Now open "fast boot files" folder at this time in keyboard hold "shift button and click right mouse button" at a time with in the folder
(don't select any file first just left click on white space then proceed "shift+right mouse click at a time")
6> with in this choose option "Open Command Window Hear" then type command
command is
Code:
fastboot flash recovery recovery.img
​ now it show to "okay" messages
now type command
command is
Code:
fastboot reboot
​
7> wait until Ur home screen available on device then disconnect from PC that it enjoy recovery
4) FAQs:
1. HOW TO CHECK WHETHER I ROOTED OR NOT ?
A. Don't worry there is a lot of options to check root access on of that is easy Download "Root Checker" from Google Play and follow procedure in app
2. WHEN FOR ROOTING I CONNECT DEVICE NOTHING PROCESSING ?
A. Install drivers Perfectly and check data cable
3. HOW TO ENTER FAST BOOT MODE?
A. Take Look its easy but small confusion is device started in fast boot mode or not when in fastboot mode its just showing blue led and logo and stuck at logo its enough device in fastboot mode
to switch on fastboot mode(Volume down + Power Button)
4. HOW TO ENTER INTO RECOVERY MODE AFTER INSTALL OR CHECK IT?
A. just Switch off device and press (Volume UP + Power Button) wait until it show recovery don't leave keys
5. HOW TO BACK UP EXISTING ROM?
A. just enter into recovery choose backup option that's it it will place folder according to Ur recovery in SD
5) Troubleshooting
a)Unbricking
If you are reading this you have a problem. Your phone has become a brick. But do not despair yet as there are a few ways to unbrick your phone. Let us first determine whether it is a soft brick or a hard one.
**Soft Brick: Basically it means your phone is bootlooping or showing a blank screen but you can still go to recovery/download mode. The easiest way to fix this (and determine if you have a soft vs hard brick) is turn off the phone and then press the volume up button and powerbutton (keeping vol up pressed). If you see recovery no problem flash stock rom
**Hard Brick: If you cannot enter download or recovery mode then you may have a hard-brick. This is not a fun situation to be in but there is a fix that may work. It involves lots of linux commands and is not for newbies but then if you are hard-bricked what have you got to lose.
Here is the guide done by ChinmaySharma to get back if u hard bricked
http://forum.xda-developers.com/showthread.php?t=2901983
For Video Review to Unbrick watch here in this link in you tube https://www.youtube.com/watch?v=35E21Vi_ddE
Enjoy New Tricks Don't put face like this if u got any stuck at any where just ping me ill make u like :fingers-crossed:
Hi I tried to flash one of your ROM and it displayed bricked cant help and when i reboot it stuck with boot image of canvas. can you please help me
hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out
thanks sir i am doing it right
I was not able to Flash my drive but becz i have taken Fast boot file from another place and recovery file from another place. But you did the right thing everything going right and i am able to install rom in my micromax A111. Thank you so much sir. I appreciate your hard work.

Categories

Resources