Database Info

Way to a root (r)

http://forum.xda-developers.com/showthread.php?p=22191861
root for 970
Who can put it to p920？
All items are strictly in the order do not jump over them and keep the sequence!
Spoiler (+ / -) (I advise you to read before flashing)
to the root of drive C:
Two. Download Attachment SmartFlashTool_External.rar (1.18 MB) Number of downloads: 37
and extract the root of drive C:
3. Download Attachment Superuser.zip (611.2 KB) Number of downloads: 51
and put ( no need to unpack ) File on the SD-card phone
4. Turn off the phone.
Five. We hold the Volume Up (+) and insert the USB cable one end into the computer, the other into the phone
6. We will have the text of S / W Upgrade Please wait while upgrading ...
Spoiler (+ / -)
7. Run the file B_SmartFlashTool_Extern.exe
Eight. Go to the tab ROM copy D / L
9. Select the two files that you extracted from the archive [PATCHED] BIN_LGP970AT-00-V20a-CIS-XXX-JAN-06-2012 +0.7 z
10. Check:
Spoiler (+ / -)
11. Click the Start button
12. Go to the process of the firmware, go to drink coffee \ tea shorter depart away from your computer to your phone
13. When you sign Download Comlete! Go to the phone
Spoiler (+ / -)
14. On the phone, we see the regime Recovery (touch it, the management of a finger)
15. Select install zip from sdcard
16. Then choose zip from sdcard
17. Prolistyvayem and choose Superuser.zip
18. Prolistyvayem and select Yes - Install SuperUser.zip
19. Select + + + + Go back + + + +
20. Choose wipe data / factory reset
21. Prolistyvayem and select Yes - delete all user data
22. Then reboot system now
That's it! Phone is loaded, if you do it right!
As a result, we have a firmware with the Root-V20A human touch and Recovery! Thank you all and good luck to you in the firmware!
Click to expand...
Click to collapse

That rom for p970 is already patched,the standart recovery is replaced by cwm
We need to do the same with p920 bin rom,but the method of unpacking and repacking .bin I don't know.

this method uses an already patched .bin file in which they replaced the lg recovery mode with cwm. unless you can find bin files of the rom you want to root through this method and patch it likewise it wont work. now to get the files from a kdz you need to grab them while they are extracted during the kdz update process. they go to the folder C:\ProgramData\LGMOBILEAX\Phone which is deleted after process completes. you can create a symbolic link to a folder of your own and then the files will stay in that folder. that is the only way I know of getting files out of a kdz file. still i think the files you get are a "modelname".dll and a wdb file which is the firmware. to process further the wdb file you need lgutils and the .dll you got from the kdz. I have read somewhere though that latest versions of the kdz updater give you directly baseband and .bin files when extracting the kdz not sure though as I havent tried it.

If we had the baseband download for each rom than it would be easy to root.

[guide][build your own cwm ]

Build your own CWM recovery
The procedure in short is:
A. Read the ROM
B. Process the ROM and generate the recovery (should
be automatic)
C. Flash the generated recovery
In a bit more details:
A. Read the ROM which includes these sub steps:
1. Create a scatter file for your phone with
MTKDroidTools and leave MTKDroidTools open
2. Open SP Flash Tools and load the scatter file you just
created
3. Go to ReadBack Tab and Add a new entry - name it
as you wish but leave the ROM_0 prefix - double tap the
new entry and choose the length of ROM you want to
read - to create the recovery it is enough to put the
number of the partition right after the recovery (you can
take that number from the scatter file you created) -
Keep in mind the number must be in Hex - so when you
copy it from the scatter file - make sure it's with the 0x
prefix - something like 0x03d80000 for example.
4. Hit the Readback and disconnect your phone from the
computer, shut it down, pull out the battery for a few
seconds and then put the battery back - don't turn the
phone on - just connect it to the usb - it should start
the readback and eventually should finish with a green
circle - if everything went good Smiling
B. Process the ROM and generate the recovery (should
be automatic):
1. Go back to your MTKDroidTools - which should still
be open from before - and hit "Process ROM" and
choose the one you just read from the SP Flash Tools.
2. If the reading was successful - you should see the
partitions you read being copied - and you would be
asked if to create CWM recovery automatically - answer
YES Smiling
3. After this process has ended successfully - go into
the backups folder inside the mtkdroidtools folder - and
you should see the ROM partitions you read - including
the original boot.img and recovery.img as well as the
newly created patched_recovery.img and
patched_boot.img
C. Flash the generated recovery:
1. Create a new folder and copy your original scatter file
you created in step A1 and your patched_recovery.img
into this new folder.
2. In the new folder you created, rename the
patched_recovery.img to just recovery.img
3. Open SP Flash Tools, choose the scatter file you
copied in the new folder and you should see that it also
adds automatically the recovery (make sure it's the
correct folder) - Make sure that ONLY recovery section
is selected !!!!!!
- hit Download and disconnect your phone from the
computer, shut it down, pull out the battery for a few
seconds and then put the battery back - don't turn the
phone on - just connect it to the usb - it should start
the flashing of the recovery and upon successful flasih -
you will see the green circle
it works for me always .... so i thought of sharing with you guys...try at your own risk...
dont forget to press the thanks button
credits: to the one who discovered the method and also me for understndng and testing and den posting in xda
press the thanks button if i helped you with this guide

[Completed] How to succesfully flash custom lollipop firmware on sony xperia m dual!

1.Download lollipop firmware
2.Download gapps
3.Download dual sim patch from and copy all zip file to your sd card
4.Now root your device,it can be easily done without pc using app called towelroot and click on make it rain!
5.After rooting unlock your bootloader
6.When you will successfully unlock the bootloader you may brick your phone but dont worry
7.From the above lollipop firmware extract the file named boot,img
8.To flash that file you need to download software known as flashtool 0.9.15.0
9,Install appliction and connect your device in fastboot mode,To connect your phone in fastboot mode hold the volume up button and connect your phone to your pc on the screen it will inform that device connected in fastboot mode
10.Now click on the flash icon located on top left and click on fastboot mode`and click ok
11.Now click on select system to flash and then a window will popup to select file now see on the bottom it will be selected *.sin change it into *.img
12.Now locate your boot.img file that you extracted on step 7
13.Now click ok it will be flashed
14.Now poweron your phone and long press the volume up key and you will see that notification light first turn orange and then green and you will come on recovery mode now select wipe and clear all data,system cache,dalvic cache and now come back to main menu and click on install and select micro sd and flash all the zip file we downloaded before
15.After flashing click on reboot
16.Now to make your both sim work use root explorer and goto system/build.prop and Remove these following ones :
CODE:
ro.ril.telephony.mqanelements=4
persist.radio.oem_socket=false
And write
CODE :
persist.radio.multisim.config=dsds
persist.radio.dont_use_dsd=true
17.For any problem please comment!
Enjoy!

Hi,
here isn't the right place for this kind of thread. Please see this forum for Xperia M
Sony Xperia M
Thanks for understanding
Thread closed

IKON IK543 stock rom

Hi all,
For all those who are facing problems with annoying surveys, asking passwords for rar files and then facing problems in installing rom (problems faced by me). Here comes the genuine firmware file for IKON IK543
Warning: Before going any further please note that neither me nor xda will be responsible if your phone gets bricked in this process
So let us start the process.
1. Download ikon firmware from here and extract it.
2. Download SP Flash Tool latest version from here or direct link here and extract it(credit:android mtk)
3. Download USB drivers from here and install appropriate drivers.
4. Open flash_tool.exe from SP flash tool folder. (note: run as administrator)
5. Select scatter-loading and select the scatter file from the extracted firmware folder.
6. Manually select all the files in the sp flash tool.(sorry for the trouble)
7. Select Format All+Download and select download.
8. Wait for the file to be flashed. Once it is done green circle will appear and done.
Enjoy!!!!
For those who face invalid IMEI follow this procedure.
1. Open Dailer on your phone and hit *#*#3646633#*#*
2. Click on "CONNECTIVITY"
3. Click on "CDS INFORMATION"
4. click on "RADIO INFORMATION"
5. then to "PHONE 1" write inThe IMEI is under the battery.)AT +EGMR=1,7,"00000000000" (Replace "zeros" with your own IMEI No.) then restart the phone.
6. Follow 1 to 5 and then "PHONE 2" and write in:
AT +EGMR=1,10,"0000000000" (Replace "zeros" with your own IMEI No.)
For reference you can see this video here
Then reboot and done.
Enjoy!!!

[guide] how fix imei moto c plus

Fix imei in moto c plus (All Models)​
INSTRUCTIONS:
1. Flash stock by sp flash tool and reboot once.
2. Unzip imeifix.zip
3. Open snwrite tool
4. Select 'system config'
5. Load AP_DB and MD_DB files from that imeifix folder
6. Open screenshots I given from that folder
7. Select options as in screenshots
8. Now select on save
9. Click on start
10. Enter 2 imei values(written on back side of your phone)
11. Power off by removing battery and insert battery
12. after entering imei select OK and connect phone
13 . wait for 5 min don't touch anything...
Tool Link: mod edit - telegram link removed​
THANKS>>>>>>>>

it is temporary or after reset work?

link not working ................

thread closed until the download links will be available @DhirajMS pm me when you`re ready to share something with us