Fix imei in moto c plus (All Models)
INSTRUCTIONS:
1. Flash stock by sp flash tool and reboot once.
2. Unzip imeifix.zip
3. Open snwrite tool
4. Select 'system config'
5. Load AP_DB and MD_DB files from that imeifix folder
6. Open screenshots I given from that folder
7. Select options as in screenshots
8. Now select on save
9. Click on start
10. Enter 2 imei values(written on back side of your phone)
11. Power off by removing battery and insert battery
12. after entering imei select OK and connect phone
13 . wait for 5 min don't touch anything...
Tool Link: mod edit - telegram link removed
THANKS>>>>>>>>
it is temporary or after reset work?
link not working ................
thread closed until the download links will be available @DhirajMS pm me when you`re ready to share something with us
Related
How to recover your SE mini pro / How to use flash tool
1. Download Flash tool
2. Download stock rom
3. Go to Advance tab -> bundle creation
4. Select your extracted stock rom folder and click open
5. it will open all *.sin files. Click on ">" button to add into firmware content.
6. Give any names to "Device", "version" and "branding".(DVB)
7. Click on ok. you will get *.ftf file same name as DVB.
8. Drag this file into flashtool, it will add and finish bundle creation.
9. No connect your phone in flash mode (hold back button while connecting and hold it while completing all process)
10. After 100% your phone will be rebooted else manually Reboot it just.
You can download directly my *.ftf file , send me private message.
Posting this info with images and video soon.
Thanks all.
Hi all,
For all those who are facing problems with annoying surveys, asking passwords for rar files and then facing problems in installing rom (problems faced by me). Here comes the genuine firmware file for IKON IK543
Warning: Before going any further please note that neither me nor xda will be responsible if your phone gets bricked in this process
So let us start the process.
1. Download ikon firmware from here and extract it.
2. Download SP Flash Tool latest version from here or direct link here and extract it(credit:android mtk)
3. Download USB drivers from here and install appropriate drivers.
4. Open flash_tool.exe from SP flash tool folder. (note: run as administrator)
5. Select scatter-loading and select the scatter file from the extracted firmware folder.
6. Manually select all the files in the sp flash tool.(sorry for the trouble)
7. Select Format All+Download and select download.
8. Wait for the file to be flashed. Once it is done green circle will appear and done.
Enjoy!!!!
For those who face invalid IMEI follow this procedure.
1. Open Dailer on your phone and hit *#*#3646633#*#*
2. Click on "CONNECTIVITY"
3. Click on "CDS INFORMATION"
4. click on "RADIO INFORMATION"
5. then to "PHONE 1" write inThe IMEI is under the battery.)AT +EGMR=1,7,"00000000000" (Replace "zeros" with your own IMEI No.) then restart the phone.
6. Follow 1 to 5 and then "PHONE 2" and write in:
AT +EGMR=1,10,"0000000000" (Replace "zeros" with your own IMEI No.)
For reference you can see this video here
Then reboot and done.
Enjoy!!!
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment 3851592
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..
Guys i just found the twrp made by some one in internet anyone try this and give me the result that can i made a video and also custom roms.....
Note:i am not responsible for any bricked devices/mal-functioned damage or anything caused by this thread.....
TWRP Link- (i am new so i cant put links) links will be updated soon
Website Link: (i am new so i cant put links) links will be updated soon
Guide:
1. Enable USB debugging on your phone. Go to Setting -> About Phone -> Now Tap on Build Number until you see a message an on a screen like “You Are Now A Developer”.
2. Now you have developer option in your phone setting panel, go to Settings-> Developer Options -> Enable USB debugging and also enable OEM unlock. See the iamge below.
3. Download SP FlashTool (win) extract it on your computer and run the flash_tool.exe file .
4. Find the Scatter File from the same TWRP zip file. The TWRP file that you downloaded fr0m the Download section.
5. Now in the flash tool click on the scatter file, find the scatter file in the TWRP extracted folder.
6. Leave only the recovery line Checked(Ticked), then double click on its Location field and browse for your device-specific custom recovery image file, that you can find in the list above.
7. Click on the Download button. The flashing process will start automatically and it needs just a few seconds.
8. Now the custom recovery has been flashed. You may remove the USB cable. You can boot your phone into recovery by powering it on while pressing the volume up button.
Credits:Goes to the owner/website.....
I Just Shared It......:good:
Links
TWRP - Mod Edit :- Links Removed
Website - Mod Edit :- Links Removed
Links Are Updated
yuvarajv952 said:
TWRP - Mod Edit :- Links Removed
Website - Mod Edit :- Links Removed
Links Are Updated
Click to expand...
Click to collapse
Brother, this particular recovery is for Oppo R9s plus which has completely different specifications than realme 1. They have falsely named it as realme 1 recovery. It is not recommended to be flashed on realme 1.
Thread closed as the recovery shared is for different device nor was it tested before sharing.
Thanks
SacredDeviL666
Forum Moderator.
* I am not responsible for bricked devices, dead SD cards. You are choosing to follow this thread, and you are responsible for any mess !Requirements:
- Windows 8.1 or above 64-bit with Admin rights (Windows 10 64 bit recommended)
- Python Installed
- Original USB Cable provided by Realme
- At least 10GB of internet
Steps:
1. Download the tools attached below
2. In Driver/cdc-acm folder you will find cdc-acm.inf, right click and install it (You need to disable core isolation from windows security settings, if enabled)
3. Install libusb-win32-devel-filter-1.2.6.0.exe
4. Open libusb-filter-tool
5. Connect your device to your pc while pressing and holding volume up, volume down button together
6. You will see Mediatek USB PORT (COM X), select and install it and disconnect your device (Switch off your device in case, it turned on)
7. Now extract the firmware (which is in zip file), you will see a .ofp in the extracted files, use oppo_decrypter tool (link below) to extract the ofp file
8. Open SP Flash tool which is provided below and select MT6853 Scatter from wherever you extracted the ofp file, after that you need to uncheck opporeserve, special_preload, my_custom, cdt engineering
9. (USE Download only option) click on download button
10. Open MTKMETAUtility.exe and select Disable Auth
11. Connect your phone in the same USB port and with same method as above
12. SP Flash Tool should start flashing the device, after the flashing is done, disconnect and press power-button for 10+ secs to reboot, it will reboot into recovery
13. Make sure to Format Data (Yes, not wipe data, use FORMAT DATA), it should reboot automatically after you will press ok
14. Done !!!!
Downloads:
-Drivers (CSC-acm and libusb-win32-devel-filter)
-MTKMETAUTILITY
-Python
-Firmware (Realme Narzo 30 pro 5G) (Android 10)
-oppo_decrypt_tool
Is there a video version or an updated version of this tutorial? I'm with my Q2 (rmx2117) brick
the touch is not working in recovery mode
MTKMETAUTALITY is not working
AK_8K said:
MTKMETAUTALITY is not working
Click to expand...
Click to collapse
Try this one: MTK META UTILITITY: Mega
XeeXa said:
Is there a video version or an updated version of this tutorial? I'm with my Q2 (rmx2117) brick
Click to expand...
Click to collapse
You can follow these steps but try using the chinese firmware (Realme Q2), Sorry, I do not have any video tutorial for this.