[guide][build your own cwm ] - Miscellaneous Android Development

[guide][build your own cwm ] - Miscellaneous Android Development

Build your own CWM recovery
The procedure in short is:
A. Read the ROM
B. Process the ROM and generate the recovery (should
be automatic)
C. Flash the generated recovery
In a bit more details:
A. Read the ROM which includes these sub steps:
1. Create a scatter file for your phone with
MTKDroidTools and leave MTKDroidTools open
2. Open SP Flash Tools and load the scatter file you just
created
3. Go to ReadBack Tab and Add a new entry - name it
as you wish but leave the ROM_0 prefix - double tap the
new entry and choose the length of ROM you want to
read - to create the recovery it is enough to put the
number of the partition right after the recovery (you can
take that number from the scatter file you created) -
Keep in mind the number must be in Hex - so when you
copy it from the scatter file - make sure it's with the 0x
prefix - something like 0x03d80000 for example.
4. Hit the Readback and disconnect your phone from the
computer, shut it down, pull out the battery for a few
seconds and then put the battery back - don't turn the
phone on - just connect it to the usb - it should start
the readback and eventually should finish with a green
circle - if everything went good Smiling
B. Process the ROM and generate the recovery (should
be automatic):
1. Go back to your MTKDroidTools - which should still
be open from before - and hit "Process ROM" and
choose the one you just read from the SP Flash Tools.
2. If the reading was successful - you should see the
partitions you read being copied - and you would be
asked if to create CWM recovery automatically - answer
YES Smiling
3. After this process has ended successfully - go into
the backups folder inside the mtkdroidtools folder - and
you should see the ROM partitions you read - including
the original boot.img and recovery.img as well as the
newly created patched_recovery.img and
patched_boot.img
C. Flash the generated recovery:
1. Create a new folder and copy your original scatter file
you created in step A1 and your patched_recovery.img
into this new folder.
2. In the new folder you created, rename the
patched_recovery.img to just recovery.img
3. Open SP Flash Tools, choose the scatter file you
copied in the new folder and you should see that it also
adds automatically the recovery (make sure it's the
correct folder) - Make sure that ONLY recovery section
is selected !!!!!!
- hit Download and disconnect your phone from the
computer, shut it down, pull out the battery for a few
seconds and then put the battery back - don't turn the
phone on - just connect it to the usb - it should start
the flashing of the recovery and upon successful flasih -
you will see the green circle
it works for me always .... so i thought of sharing with you guys...try at your own risk...
dont forget to press the thanks button
credits: to the one who discovered the method and also me for understndng and testing and den posting in xda
press the thanks button if i helped you with this guide

Related

How to recover SE mini pro / How to use flash tool

How to recover your SE mini pro / How to use flash tool
1. Download Flash tool
2. Download stock rom
3. Go to Advance tab -> bundle creation
4. Select your extracted stock rom folder and click open
5. it will open all *.sin files. Click on ">" button to add into firmware content.
6. Give any names to "Device", "version" and "branding".(DVB)
7. Click on ok. you will get *.ftf file same name as DVB.
8. Drag this file into flashtool, it will add and finish bundle creation.
9. No connect your phone in flash mode (hold back button while connecting and hold it while completing all process)
10. After 100% your phone will be rebooted else manually Reboot it just.
You can download directly my *.ftf file , send me private message.
Posting this info with images and video soon.
Thanks all.

Root Doogee DG800

The recovery this one created for my and it works perfectly
Download this
https://www.dropbox.com/s/jbtsydi9iiq872q/Root DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
Official Rom
https://drive.google.com/file/d/0B-eEVUUoOlT4bWI1MXRQcU5Fd28/preview?pli=1
Unzip the folder and will come out first and zip multiple folders
The zip-UPDATE-v1.99.zip SuperSU put it in the sd mobile
And also supersupro.apk
Unzip the second download and you create another folder with the rom files in img format
Replace this folder atchivo recovery by the recovery of the first zip folder.
Let the mess
SP_Flash_Tool_v3.1328.0.183 folder and open the flash file tool.exe
Pinchais where it says what you want to scatter and the scatter of the rom folder with recovery bajasteis already changed
When loading uncheck everything below minus recovery
You press F9, you will get a warning that if you say yes or (not in the pc and do not remember)
You turn off the phone, you remove the battery and do not you put it, connect the usb cable to mobile and pc and the bottom bar has to run when you get a green circle on the pc screen is made if it does bada is that drivers have no positions
(If you do not have the drivers positions see the device manager looking for the one with the yellow symbol, you say update search the computer, looking for the folder of the drivers of the first zip "All MTK USB Driver 2014" OK you the installed , if it runs the bar, if not disconnect and then reconnect the mobile)
Unplug the phone and put battery
Boot into recovery mode volume up + power until you start in the center of the screen out some small letters and an arrow moves to move volume volume up to select the option below the top.
In recovery install zip for sdcard to select with the power button and move the volume
Choose zip or something and look SuperSU-UPDATE-v1.99.zip
Click on the install it
Then go back and reset the root is already done
Install supersupro.apk
Open SuperSU and leave so
Settings:
Mark activate superuser
Mark survival mode
Uncheck re-authentication
Allow access by default
Uncheck display notifications
Access full content
Ready
To enjoy it guys, New phone and new root
Sorry for the tirade, so I did as soon as I arrived yesterday morning and so far everything perfect
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language

busote said:
The recovery this one created for my and it works perfectly
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language
Click to expand...
Click to collapse
http://devteam.vn/forum/rom-mod-cua...oot-recovery-rom-unbrick-all-in-one#post20874

Worked for me!
Thanks a lot for this information and for the recovery image!
Here is how I did it:
Download this
https://www.dropbox.com/s/jbtsydi9ii...ot DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
I already had drivers for flashing from here (continue reading the thread to find how to install for Windows 8):
http://forum.xda-developers.com/showthread.php?t=2206421
I found the Doogee Dg800 Official ROM here:
http://www.doogeemobile.com/download
I also used the SPflash tool Doogee provides.
Then:
1) Extract the zip from the first (dropbox link) and put the file named UPDATE-SuperSU-v1.99.zip on your SD card.
2) Put the supersupro.apk on the SD card too.
3) Unzip the official Doogee ROM
4) I did not replace the recovery.img in the official ROM folder
5) Open SPFlash and open the scatter file via the FIle menu - for me this was called MT6582_Android_scatter.txt
6) By default all the entries that are loading will be selected (ticked)
7) Following this tutorial (http://www.gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/) for installing CWM I did:
- Unselect all (remove tick) except for the entry named RECOVERY
- Click on the entry (click on the word RECOVERY)
- Navigate to the recovery image provided in the first download
8) Click Download in SPFlash Tool
9) Turn off your phone
10) Remove the battery for a few seconds
11) Replace the battery but do not turn on the phone
12) Connect the phone via usb cable
13) The bar in SPFlash Tool should go red
14) It should then go yellow and load to the end
15) A green circle should pop up - success.
16) Disconnect you phone and hold Volume Up button and Power button till you go to recovery (hold for a while)
17) You see only three options - select the first one called "recovery". Up volume is for changing options down volume is to select.
18) Now you see the recovery menu - select the second option, using the down volume key, called "install zip from sdcard"
19) Select this with the power button
20) Select the first option in the new menu - it's called "choose zip from sdcard"
21) Scroll down to UPDATE-SuperSU-v1.99.zip and select it
22) Scroll down to the option that says "Yes - Install UPDATE-SuperSU-v1.99.zip
23) You will see it install, when it finishes, scroll to the bottom of the menu and select the "++Go Back++" until you get to the first menu
22) Select "reboot system now"
23) Install supersupro.apk
24) As suggested do the following:
- Open SuperSU and leave so
- Settings:
- Mark activate superuser
- Mark survival mode
- Uncheck re-authentication
- Allow access by default
- Uncheck display notifications (I want notifications so I did not do this)
- Access full content ( I don't think I saw this option)
Done!
Check for successful root using something like Root Checker Basic from app store.
I did this to solve GPS issues that I had with the phone, keep reading for how I solved those problems:
Problem: Applications could not connect to GPS
Solution: Reflash official ROM using this tutorial: http://forum.xda-developers.com/showthread.php?t=1982587
with drivers from: http://forum.xda-developers.com/showthread.php?t=2206421
New problem: GPS is poor and takes long to get a fix.
Solution: Follow this tutorial: http://www.gizbeat.com/2159/gizbeat-101-gps-not-working-on-mtk6589-mtk6577-mtk6575/
which basically comes down to installing and using FasterGPS

Trouble rooting DG800
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks

tantrumact said:
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks
Click to expand...
Click to collapse
i also cannot find it, hopefully you have found it lol i cant find the file anywhere!

question
one massive question i have with this thread is..... DOES ALL THIS FORMAT THE PHONE.
if so thats fine but it would be really handy to know

The file from the dropbox link disapeared Is there anybody who still has it, and can reshare it ?

KARBONN TITANIUM S20 deVLEOPmENT

HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST

Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!

Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA

Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share

Alcatel Flash or 6042D Stock ROM, ROOTING, CWM RECOVERY

I am not a android guy but faced lot of challenge in finding the Stock ROM for Alcatel Flash or TCL 6042D or Alcatel 6042D. Found one here but having few corrupted files due to which "settings" "message" and few others didn't worked well and in fact frequent crash. Fortunately I had another 6042D to my relative and I took CWM backup of that device and would like to share with you.
Please follow the following steps and don't do otherwise, as only these settings worked for me, other settings may not work. Please Note That these steps are applicable provided that required driver for that device is installed properly.
STEP-A: Download these three files. Please add https: to all links.
1. Stock Recovery and Scatter File package.
//drive.google.com/file/d/0B-BBKAO9380FSkI0UUMxNDc4WEk/view?usp=sharing
2. SP Flash Tool Software
//drive.google.com/file/d/0B-BBKAO9380FRjV2dF81c1VLY1E/view?usp=sharing
3. CWM Backup package
//drive.google.com/file/d/0B-BBKAO9380Fb0NoWTNTLWhtQjA/view?usp=sharing
4. Extract the three files
STEP-B: Recovery Install. No root required
1. Go to sp flash tool folder and run it.
//drive.google.com/file/d/0B-BBKAO9380FMU1NUlFZQzFVNWc/view?usp=sharing
2. Then load scatter for the device from "SPtool_stock_recovery_scatter_OT6042D" folder.
//drive.google.com/file/d/0B-BBKAO9380FRFZPRElfdDAwR0E/view?usp=sharing
//drive.google.com/file/d/0B-BBKAO9380FWmhXZmlDLU5oQzQ/view?usp=sharing
3. If scatter file loaded successfully then you will see "boot" and "recovery" is marked. You must unmark or deselect the boot file. Then double click the recovery file to choose a recovery. Do not choose the recovery from "SPtool_stock_recovery_scatter_OT6042D" folder.. Choose the recovery from "\clockworkmod\backup\2015-10-16.14.26.59\recovey.img". Then press download button.
//drive.google.com/file/d/0B-BBKAO9380FUmtsMHI2WTRMakU/view?usp=sharing
//drive.google.com/file/d/0B-BBKAO9380FQzJLNjB2cDNiQ2M/view?usp=sharing
4. Connect your phone to Computer USB. Then turn the Phone completely OFF. Then after few seconds you will see the SP flash tool is working and sending file. File transfer rate and status will be shown in status bar.
5. If things are ok then you will see a Green Circle as "OK" symbol. And you are done with installing CWM recovery. Now turn the Phone ON.
STEP-C: Installing Stock ROM
1. Copy the extracted "clockworkmod" folder to the root directory of microSD card.
2. Turn OFF the Phone and wait for vibration. After vibration press "UP VOLUME + DOWN VOLUME + POWER" key same time and wait to see Alcatel logo. Release the buttons.
3. You should see the CWM recovery screen. Now follow the steps
wipe data/factory reset
wipe cache
Goto Advance then wipe dalvic cache and go back
backup or restore
restore
Choose the file from "clockworkmod\backup\2015-10-16.14.26.59"
chose yes in confirmation screen
Wait to see "restore from SD card complete"
4. reboot system now. First boot will take some time . Have patience.
Links are from Google drive. Sometimes google does not allow download of zip files. Let me know if it happens.
Thanks and Jajakallahu Khairan

1$ payment error
i have flashed the image file, and the system prompts for making 1$ payment, however the system prompts an error system ui not responding, now i am unable to make payment and unable to use the phone either

[Resolved] How to root Vodafone Smart Tab 7 (Tablet) VFD 1100 (Solved)

Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100

DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
Hi, i can use this way Also for Vodafone Smart Tab 10?

Database Info

welcome