hello everyone
i am hoping that you guys will be able to help me out. i have an xtrons head unit 10.1 inch double din running 5.1 firmware. i reached out to the people that sold it to me about updating to a newer firmware and they told me i can only update the software. they sent me a file that would update my software with instructions. i updated my unit now the back light that lights up the touch buttons does not work neither does the power, volume up, down or home the back button does work but instead of going back it raises the volume. i can not turn the head unit off only when the car ignition gets turned off. i tried to use a remapping app but it doesn't seem to find the buttons that i want to remap. the sellers are not offering any help because it is 3 months past the warranty. xtrons told me the radio is discontinued and are also not offering any help this is what was on the file they sent HH 通用机安卓5.1(20170307)_rk3188_5.1.rar
p.s i also attached a photo of the info that the radio has i am not sure if when i updated it if it changes the info. thanks for any help that you guys can provide
Have you tried going into the factory settings and entering the touch calibration menu?
If you go to settings, factory settings (password is "126" without the quotes) and go to the touch panel calibration there's one to calibrate the touch screen and another one that says "touch panel" or front panel.
Play around with that menu and that should solve your problem.
thanks for helping me as fast as you did. it did work i also found a video on YouTube that might help other with this same problem. https://www.youtube.com/watch?v=I27cjq0SUTk
homer.ali said:
Have you tried going into the factory settings and entering the touch calibration menu?
If you go to settings, factory settings (password is "126" without the quotes) and go to the touch panel calibration there's one to calibrate the touch screen and another one that says "touch panel" or front panel.
Play around with that menu and that should solve your problem.
Click to expand...
Click to collapse
how udate xtrons 10.1
I have the same radio xtrons 10.1 with version 5.1.1, which I want to update, could you give me the rom file?
rdptrix said:
hello everyone
i am hoping that you guys will be able to help me out. i have an xtrons head unit 10.1 inch double din running 5.1 firmware. i reached out to the people that sold it to me about updating to a newer firmware and they told me i can only update the software. they sent me a file that would update my software with instructions. i updated my unit now the back light that lights up the touch buttons does not work neither does the power, volume up, down or home the back button does work but instead of going back it raises the volume. i can not turn the head unit off only when the car ignition gets turned off. i tried to use a remapping app but it doesn't seem to find the buttons that i want to remap. the sellers are not offering any help because it is 3 months past the warranty. xtrons told me the radio is discontinued and are also not offering any help this is what was on the file they sent HH 通用机安卓5.1(20170307)_rk3188_5.1.rar
p.s i also attached a photo of the info that the radio has i am not sure if when i updated it if it changes the info. thanks for any help that you guys can provide
Click to expand...
Click to collapse
balon2018 said:
I have the same radio xtrons 10.1 with version 5.1.1, which I want to update, could you give me the rom file?
Click to expand...
Click to collapse
Send me your email I will look it up tomorrow in my files and forward it over to you
Related
Hi guys I have had a teyes spro plus for a couple of months on a vauxhall insignia. I have never been able to get the steering controls to work, when I click on the steering buttons the car comes up with volume icon on the dash clocks and says no audio and when I try to change the canbus to insignia everytime its like it isn't saving the setting and keeps going back to like I haven't set it up. If I reboot the unit and goto steering buttons it flashes up for a second to press a button on the wheel to configure then nothing... everything else works on screen like door opening, climate control, reverse camera ect just not the steering controls..im pretty sure the 4 pin usb hasn't any power either im yet to confirm this with a multimeter. I have updated the unit to the latest firmware but still the same.
Any ideas? Or anything i can try? Thanks
What did reseller and/or installer suggest.
Any info in the teyes discussion post?
I bought it directly from teyes and installed it myself. Ive went through all the connections all seem ok. I've contacted teyes who said it was an issue with the firmware why it wasn't saving wait for the new one which I did but its exactly the same.
Is there a teyes discussion post sorry I've missed it have you a link bud thanks
Don't know if this is related, but the supplied Teyes wiring harness had an unplugged small white connector, I plugged the connectors together and could not get the steering wheel to learn. Unplugged the connector and was able to program the steering wheel buttons.
morephun said:
Hi guys I have had a teyes spro plus for a couple of months on a vauxhall insignia. I have never been able to get the steering controls to work, when I click on the steering buttons the car comes up with volume icon on the dash clocks and says no audio and when I try to change the canbus to insignia everytime its like it isn't saving the setting and keeps going back to like I haven't set it up. If I reboot the unit and goto steering buttons it flashes up for a second to press a button on the wheel to configure then nothing... everything else works on screen like door opening, climate control, reverse camera ect just not the steering controls..im pretty sure the 4 pin usb hasn't any power either im yet to confirm this with a multimeter. I have updated the unit to the latest firmware but still the same.
Any ideas? Or anything i can try? Thanks
Click to expand...
Click to collapse
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
Click to expand...
Click to collapse
Hey! I'm also having the same issue. Could I ask you to send me a link with the older apk, since I can't find it anywhere
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program
Click to expand...
Click to collapse
Hi
Would you be able to guide me through how to extract from the firmware the steering wheel apk. I try to find it from the firmware but not abe to see it.
Thanks.
tiestolord said:
Hi mate i had same issue, and i manage to fix it.
But we dont have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
Click to expand...
Click to collapse
Hi do you still have the old APK for the canbus you extracted?
Hi guys
My spro plus stopped working since 1 week and I’m unable to find the issue I checked everything changed the 15A also but didn’t resolved the issue. It just shows the black screen when the engine starts and the button lights just turn on and off after few seconds.
I contacted the technical teyes team they said your device is broken.
akobkz said:
Hi guys
My spro plus stopped working since 1 week and I’m unable to find the issue I checked everything changed the 15A also but didn’t resolved the issue. It just shows the black screen when the engine starts and the button lights just turn on and off after few seconds.
I contacted the technical teyes team they said your device is broken.
Click to expand...
Click to collapse
Send it back / warranty.
I recently tried to update the MCU in my Dasaita PX6 head unit. After the update the unit is entirely unresponsive. I looked at the MCU file after I installed it and realized I installed the MCU from another company, not Dasaita. (I realize I should have cheeked this before but I did not and is why I'm in this situation now. Is there anything I can do to fix it? I tried to enter recovery mode, however, the reset button does not work. The screen remains black and the buttons do not light up like they did before the update when the reset button was pressed. Fuses are in good condition. My exact unit is linked here: https://www.amazon.com/Dasaita-Android-Corolla-2014-2017-Carplay/dp/B07XQJH6V6 .
Runnitech said:
I recently tried to update the MCU in my Dasaita PX6 head unit. After the update the unit is entirely unresponsive. I looked at the MCU file after I installed it and realized I installed the MCU from another company, not Dasaita. (I realize I should have cheeked this before but I did not and is why I'm in this situation now. Is there anything I can do to fix it? I tried to enter recovery mode, however, the reset button does not work. The screen remains black and the buttons do not light up like they did before the update when the reset button was pressed. Fuses are in good condition. My exact unit is linked here: https://www.amazon.com/Dasaita-Android-Corolla-2014-2017-Carplay/dp/B07XQJH6V6
Click to expand...
Click to collapse
hi friend i am in same situation, but difference is that i have white screen and do not know what to do.
anybody can help?
saady002000 said:
hi friend i am in same situation, but difference is that i have white screen and do not know what to do.
anybody can help?
Click to expand...
Click to collapse
Hi guys i am in same situation with same Dasaita max10 px6 unit and have only white screen.
I need help to get back to factory settings or add new rom.
If anybody solved please share in details how.
hello.... i have an Xtrons IA91MTVL running android 11...
pretty much everything works as expected except the phone... and the problem seems isolated to incoming calls.
i have my android phone running android 12 connected to the xtrons via bluetooth.... after i answer a phone call... the xtrons unit keeps ringing even after i'm talking to the person who called me... the phone pop up that draws over whatever app i was using when the phone rings doesn't work at all. i can't answer or end calls with it and when i end the call on my actual phone... the pop up stays on the screen. the only way i can get rid of it is by hitting the power button... which seems like it only sends the unit into standby... the pop up works fine with outgoing calls. any ideas?
speaking of the power button... i haven't figured out how to get it to reboot yet. my previous version of this unit had physical buttons and you would just hold the power button to get it to reboot... this one is the updated version with soft touch buttons... when i long press the power button it does nothing...
What does seller suggest when contacted for suppprt
waiting for their reply.
they replied and asked me for my order number but didn't really address my questions. i replied with the information they requested.
ghostofzuul said:
they replied and asked me for my order number but didn't really address my questions. i replied with the information they requested.
Click to expand...
Click to collapse
Is it an MTCD device. Post screen shots of Android system information including MCU version
i had to put this project on hold... but i am getting back to it now...
after a lot of back and forth with xtrons i have what i believe to be the correct firmware update for my unit and so i'm going to install that and once that's done i'll report back with sysinfo.
Hello I updated the MCU and the firmware today. Bluetooth no longer works. The buttons on the radio itself on the side also no longer work. Can someone tell me how to get it back to its original state?
What is headunit. Post Android system information including MCU version.
RokkoHB said:
Hello I updated the MCU and the firmware today. Bluetooth no longer works. The buttons on the radio itself on the side also no longer work. Can someone tell me how to get it back to its original state?
Click to expand...
Click to collapse
Perhaps my post may be of some help:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
@RokkoHB please post a screenshot of the About system page showing Android version and MCU version. We have no idea what version you updated to.
You may need to directly contact Dasaita for a firmware update to get your head unit back to the way it was before you updated. It is a good idea to have a copy of the firmware version you had before updating and a copy of the update you want to update to. Otherwise it's hit or miss getting things back the way they were.
Also be sure the firmware updates you are applying are known to fix a specific issue you are currently having. Upgrading just to get a higher version number can unintentionally break a lot of stuff.
jlbooth said:
Perhaps my post may be of some help:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
Click to expand...
Click to collapse
I tested it .. but the problem is, when i press the touch button nothing happens.
jlbooth said:
@RokkoHB please post a screenshot of the About system page showing Android version and MCU version. We have no idea what version you updated to.
You may need to directly contact Dasaita for a firmware update to get your head unit back to the way it was before you updated. It is a good idea to have a copy of the firmware version you had before updating and a copy of the update you want to update to. Otherwise it's hit or miss getting things back the way they were.
Also be sure the firmware updates you are applying are known to fix a specific issue you are currently having. Upgrading just to get a higher version number can unintentionally break a lot of stuff.
Click to expand...
Click to collapse
Thanks for try to Help me.
RokkoHB said:
I tested it .. but the problem is, when i press the touch button nothing happens.
Click to expand...
Click to collapse
That is the problem that my tutorial post attempts to solve.
Did you try going thru the tutorial steps? The tutorial will help you reconfigure those touch buttons. I believe if the rest of the touch screen works, then those touch buttons will work if you go thru and re-establish the button configurations using the tutorial. Be sure to touch on the red numbers that appear on screen as this step actually establishes the touch screen x,y calibration.
Hi everyone! Just got my PX6 MTCE android 11 radio (I think 800x640 or something? Misadvertised as 1080p lol) and I am pleased with it so far.
However it only works when the key is in the ignition... It goes into sleep when the key is removed and the power button does not wake it up. Same case when I turn off the engine, it goes straight into sleep mode unlike my OEM radio which would remain on until I pull my key out.
I spend a bit of time with the radio on when the car is off, so I need it to be able to be used when the key is out/car is off.
Is there any solution to this? I briefly checked factory settings and couldn't find much...Would I need to root it? Or should I try to put a relay in the harness? Surely it is software related? Thanks!
Also, the OEM one could be turned on anytime, regardless if the key was present.
The unit I bought was a drop in replacement which included the harness for my car, if that is important.