Based on Samsung Stock Roms for GTI9305:
- Stable and smooth
- Rooted, Deodexed, Zipaligned, Busybox added
- unbranded, boot sound renamed
- without any mods
- new bootloader isn't included!
- 5 Shortcuts possible add on Lockscreen
- defaultly set EN language, multilingual
All next it’s on your own risk!!!
About bootloaders:
- if you ever flash 4.3 or 4.4 via Odin or updated from OTA you have new Bootloader.
- if you bought your device and you dont know what bootloader you have, turn off your phone,reboot to download mode (hold power + volume down +home buttons) and when is there Knox flag 0x1 you have new and you are warranty off. When Knox flag is there 0x0 you have also new bootloader, but you are still in warranty and when you'll flash any custom recovery or unofficial firmware via Odin, you'll have then Knox 0x1 and you will be warranty off - so it's on your deciding. When isn't in download mode any records about about Knox, you still have old bootloader (btw congratulation ) and don't ever flash via Odin 4.3 and higher firmware - it's a pity.
PS: exit from download mode: hold pressed power button cca 5 seconds
Downloads:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1):
Release for old and new bootloader - AGNi Kernel 5.50 with Boeffla Sound:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v5_5BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1):
Release for old and new bootloader - AGNi Kernel 5.00 with Boeffla Sound:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v500BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
-Roms reuploaded 9th November 2014 (fixed modem)
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3):
Release R3 - use on old bootloader - Hbohd kernel v0.2:
I9305XXUFNI3_KK_CWM_R3_Root_DEOdex_Ziplgn_HboKernel_v2.zip
MD5: 30f189d7620db2bed6cf48c34d0400b4
Release R2 - use on new bootloader - Stock Kernel:
I9305XXUFNI3_KK_CWM_R2_Root_DEOdex_Ziplgn_StockKernel.zip
MD5: 3bdcb9bcb3a18f9f7c85c398e2bccd14
Samsung Hub FIX for R2 and R3 HERE .... just flash it, however you'll lose possibility add 5 Short-cuts on Lockscreen
Screenshots - in 2nd post and in attachment
Changelogs - in 3th post
Customize as you like and wish!
- for good improvements I recommend install Wanam Xposed from market
- for cleaning of Bloatware you can use Rom cleaner from S4, guide you will find there, download possible HERE
Installation Instructions:
- first of all backup all your data from internal SD card, 4.3 and 4.4 has different structure tree from 4.1.2!!!
- if you go from 4.1.2 or older I recommend format internal card, if you don’t do it, on internal card were by me still data (DCIM etc...) and you can’t normal access them on 4.3, but even without formatting you can later move them from old folder to new one in 4.3 with Aroma file manager , for me easer way without format. Also is possible, that files will move automatically – also me happened
- be sure, you have EFS backup!!!
- create NanDroid backup to external card!!!
- download the *.zip file to external card!
- download to Recovery, recommended is only PHILz
- ROM isn’t full wipe, but is recommended if you get from any older
- wipe cache and Dalvik cache is automatically included
- select ZIP file from external card and install
- don’t use re-root after installation inside recovery - you don’t need it, if you'll do, then you need install again SU apk from market
- reboot and wait and wait ...
- enjoy it
- IF YOU WILL HAVE PROBLEM WITH ROOT TRY MAKE UPDATE AND APPLY SUPERUSER VIA MARKET ( then open SU and update binary and disable Knox and enjoy), OR RE-ROOT VIA CUSTOM RECOVERY (only PhilZ is recommended), THEN YOU HAVE TO AGAIN INSTALL AND APPLY SUPERUSER APK FROM MARKET.
- ON NEW BOOTLOADER AFTER INSTALLATION I RECOMMEND YOU MAKE STATUS SELINUX PERMISSIVE VIA WANAM XPOSED OR SELinux Mode Changer .....IF YOU WILL NOT MAKE THIS STATUS, ARE EXPECTED PROBLEM WITH ROOT
- If your camera doesn't work primary flash this Camera Patch. It should works . For interesting here are also older instruction: follow this (thanks @Hbohd and @P$T), if you don't have incriminated file flash relevant Stock kernel from HERE - Wifi doesn't work with old bootloader, then take photo and short video, then flash again your Rom without full wipe with kernel which you like. If your camera still doesn't work follow THIS or flash some Rom 4.1.2 (via Recovery or Odin) take picture, grab and backup incriminated files, then flash this Rom and put them to data/cwm. Don't forget backup your SlimISP_XX.bin for future. Problem with camera have only some users - Samsung issue.
Working Modems:
use version for KK from HERE
Info for devs:
If you want use this Rom or part as base for your Rom, Mods, just give me credit with link in your OP
Credits:
@Hbohd for HboKernel...you must give him BIG THX! He is the 1st, who made custom kernel for us on KK 4.4.4
@psndna88 for AGNi kernel
@Chainfire for CF-Auto-Root!
@MaHo_66 for his willingness to test it, feedback and making Screenshots
@FLooDW for his willingness to test it and feedback
- to some others here!
- to Samsung
XDA:DevDB Information
[ROM][GTi9305 LTE version][KK4.4.4] ▌Official Stock Rom ▌, ROM for the Samsung Galaxy S III I9300
Contributors
kenar2
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2015-01-28
Screenshots:
Change log:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1): - 27th January 2015
- version with Stock and AGNi kernel
ROMs I9305XXUFNJ reuploaded - 9th November 2014 (fixed modem)
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1) - 7th November 2014
- version with Stock and AGNi kernel
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R3 - 1st October 2014
- version with HboKernel, primary is R3 for users on old bootloader
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R2 - 30th September 2014
- Stable and smooth
- added all Stock apps
- fixed apks
- improved SU
Initial Release - 29th September 2014
Thanks dude!
Ahh, smaller filesize than 4.3... I'll try clean flashing from aosp, I hope it works and I don't have to flash a 4.1.2 stock rom first or something.
Yes smaller.
From Aosp just full wipe
Edit: R2 is a little larger
Now this is some good news mate :good: gonna download it now and if it boots and all works fine I will use as my official base for S5 Elite
Thanks
EDIT: oke, some feedback on the rom
-boots fine
-wifi works
-had some troubles updating the SU binary, solved applying reroot using philz recovery
-manually pushed supersu.apk to phone and installed, cause play store wouldnt open, giving FC
-updated google play services and rebooted and got 2 or 3 more FC's from google related components
-seems overall nice and smooth
-sometimes freezes when trying to open Super SU app, pressing home button solves it though
-samsung apps are removed i guess, didnt saw it in the rom
So this far of my tests, only google related stuff is not working and to be honest, i dont believe rom will boot if i transfer S5 Elite to this base without a 4.4.4 custom kernel updated, but i'll give it a try anyway
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Edit: i confirm, Samsung apps aren't included, ill add.
Edit2: added to R2, solved all problems
i would help testing but i urgently need gps and my phone working for a few days coz ii have to go somwhere. Sorry for stupid useless post. I will help testing at the end of the weeek
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
bestfil said:
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
Click to expand...
Click to collapse
It doesn't mind, everyone is suitable i think
kenar2 said:
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Samsung apps I'll check. I also don't know, why is missing SMemo and apks which I already added. The same problem with apps are on ported roms for S3 too
Edit: i confirm, Samsung apps arent included, ill add.
Click to expand...
Click to collapse
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Downloaded this version from sammobile 2 days ago... Seems stable.. Also tested this one.. Seems to work fine so far... The camera bug which I kept having constantly on other cm based 4.4.2 seems to bd fixed.. I flashed stock rom before but that didn't even fix the camera, but this one does.
Just curious : any way to remove all the Samsung bloatware with one script or app ?.. Seems to be draining the battery a lot! ?
Sent from my GT-I9305N using Tapatalk
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
MaHo_66 said:
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Click to expand...
Click to collapse
no, no i didnt use them ..... now compiling new version with sasmung apps, and with others missing apps (will be contain the same apps as from Odin) - will solve problem with market too
Edit: and yes, for 4.4.4 must be used stuff from S5 4.4.4 .... I think in S3 threads people works on it
bestfil said:
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
Click to expand...
Click to collapse
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
kenar2 said:
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
Click to expand...
Click to collapse
I still don't understand. I don't know which bootloader do I have.
I used http://forum.xda-developers.com/gal...tock-sgsiii-i9305-prerooted-firmware-t1935570 and it says:
Code:
D:\ANDROID\ANDROID-SDK\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
/system/bin/sh: su: can't execute: Permission denied
126|[email protected]:/ $ getprop ro.boot.bootloader
getprop ro.boot.bootloader
I9305XXBMJ1
[email protected]:/ $
which is propably 4.1.2's Polish ROM = 4.1.2 bootloader.
As far as I understand You say that every bootloader which is not 4.4.4 will make wifi disabled?
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new and you are warranty off. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Edit: for more information you can find here topic about knox and bootloader.
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
---------- Post added at 10:51 PM ---------- Previous post was at 10:44 PM ----------
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes correct, but if i were you i would wait for a decent FW of 4.4.4 with a custom kernel, soon or later we'll get a new kernel one way or another, till then just wait and enjoy other roms. There is nothing special on 4.4.4 and you will be probably dissapointed with the 4.4.4 fw (at least i am) considering we had to wait so long for it...
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes you have old, the best way for you is to wait for custom kernel, @Hbohd already started working on Boeffla
MaHo_66 said:
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
Click to expand...
Click to collapse
Hi tastynOOgat Users,
This is the continuation of NCSROM called tastynOOgat and is based on Android 7.0.
The builds always contain a complete clean and refreshed state, before uploading, if the thime give the possibility to do that.
Changelogs: planned, will store only links here for feature, to not fill too much in my threads.
tastynOOgat v2.0 build: B389
- not prerooted, choose what in your mind if SuperSU oder Magisk
- busybox
- deodexed / zipaligned
- Playstore 8+
- removed /updated some apps
- bugs? you tell me
Download L19
Download L09 Patch
tastynOOgat v1.0 build: B381
- not prerooted, cause of bugs by pack boot.img, use SuperSU for EMUI5 instead. Not forget to use latest TWRP, or it won't work.
- latest Busybox
- Deodexed + Zipaligned
- No Bloatware
- Playstore 7+
- removed google apps
- no bugs
Download
tastynOOgat Pre: B380 adaption of B381 cause no ota yet to update
- Stock kernel, verity removed, root by yourself
- Changelog as B381
Download
Userguide:
Marshmallow
Update from any Custom ROM or old firmware to latest MM firmware through ota or dload to gain the Nougat upgrade, theres no other methods than this.
Unlock bootloader and flash twrp for N 3.1......
resume right away with point 1
Nougat
1. A Custom ROM always needs the latest twrp + firmware installed before flashing to bypass driver changes made by huawei or it can cause errors or bootloops. It might working on some versions until they change something under the hood, then its necessary to update with dload.
2. Go to twrp, wipe -> Adwanced Wipe
3. Wipe this: Cust, Data, Internal Storage, System, Vendor, Product and Version to have a clean start
4. Flash the firmware you have downloaded.
5. Don't worry about mountencrypt error, it all works well.*
6. Flash SuperSU after you find here
7. Done
*Huawei binarys working a bit different than we use, but we can't avoid them until we have a better solution.
XDA:DevDB Information
[FRD][L09/19][C432][7.0] tastynOOgat v2.0 (07.13.17), ROM for the Honor 8
Contributors
dkionline
ROM OS Version: 7.x Nougat
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2017-07-13
Current Beta Version: B389
Beta Release Date: 2017-07-13
Created 2017-04-12
Last Updated 2017-07-17
dev 01
dev 02
thanks for your work
Does this rom have any features not on stock ?
nyc job tysm
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Anonshe said:
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Click to expand...
Click to collapse
Hey, the thing is you need to update to L09C432B381.
Propably upgrade or fullwipe. In that state you won't see changed build.
DeathKX said:
Hey, the thing is you need to update to L09C432B381.
Click to expand...
Click to collapse
To be fair nobody on the forum managed to flash the B381 yet.
How stable is this rom and can this be used as dailydriver yet?
SpeaqerDev said:
How stable is this rom and can this be used as dailydriver yet?
Click to expand...
Click to collapse
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
you can also add this mod
https://forum.xda-developers.com/honor-8/themes/mod-camera-mod-enhanced-camera-jordon-f-t3574566
johnhux7 said:
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
Click to expand...
Click to collapse
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
SpeaqerDev said:
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
Click to expand...
Click to collapse
I really don't know.
It seams a bit pointless at the mo.
We have a ROM that nobody can use
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
dkionline said:
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
Click to expand...
Click to collapse
From what i can see this is not working on 380.
U will have to wait till 381 is released for us to be able to use it
I can instal in FRD-AL00
???
aureliomilitao said:
I can instal in FRD-AL00
???
Click to expand...
Click to collapse
No, sorry.
What is the point of this rom if nobody can use it?
I didin't know about Commotio until I accidently came across it while searching for the latest Vanir ROM. For what I know, Commotio and Vanir share the same device tree and are much similar. Commotio however releases new functionality in it's ROM's that eventualy might endup in a Vanir ROM. (Anyone, correct me if I'm wrong).
So I got curious and tested Commotio's last build, B140 08202017 for the hiaeuhl. I must say, this is an excellent ROM if your bored with LinageOS. Stable, fast and comes with full OMS support for substratum. During the installation (flash by twrp) it installs the latest stable magisk version by default. I found out that the latest superSU+suhide is much more stable. So I removed magisk and rooted Commotio with SuperSU+suhide, SafetyNet doesn't stand a chance.
Links:
Commotio ROM's for the hiaeuhl here
Magisk removal tool (flashable zip) here
Latest SuperSU by Chainfire (flashable zip) here
Suhide 1.08 by Chainfire (flashable zip) here
Aroma SuperSUconfig 1.00 (flashable zip) here
OpenGApps here
Installation:
1. Clear data and dalvik/cache
2. Flash ROM
3. Flash GApps
4. Remove Magisk or keep it as it is and enjoy your ROM (remove Magisk Manager manually once booted into OS)
5. Flash SuperSUconfig. Choose to disable forced data encryption and install in systemless SBIN mode (important!)
6. Flash latest SuperSU
7. Flash latest suhide
8. Reboot
I want to remind you guys, you have to be on MM firmware with the latest TWRP recovery installed to get this to work.
Enjoy
Some screenshots can be found here
And oh, don't bother me with old threads about Commotio just to point out you remember what you've read two years ago. I'm just trying to keep the forum alive and maybe trigger custom developers to provide us with more ROM's.
My Device Us Unlocked. S-off Rooted. Firmware 2.18.617.30 Nougat 7.0 . How Can I install that Rom ?
Hi
Hi guys i need a help can someone take the nogut version twrp backup for htc one a9 or please make the sense based nogut rom plz.plz
Nuroxy said:
My Device Us Unlocked. S-off Rooted. Firmware 2.18.617.30 Nougat 7.0 . How Can I install that Rom ?
Click to expand...
Click to collapse
first you have to downgrade your firmware to 1.5x or wait for developers to publish a ROM capable of working with 2.X firmware. I have feeling this is gonna take some time. Once set to the right firmware, flash the ROM as you usually do.
eavandijk83 said:
I didin't know about Commotio until I accidently came across it while searching for the latest Vanir ROM. For what I know, Commotio and Vanir share the same device tree and are much similar. Commotio however releases new functionality in it's ROM's that eventualy might endup in a Vanir ROM. (Anyone, correct me if I'm wrong).
So I got curious and tested Commotio's last build, B140 08202017 for the hiaeuhl. I must say, this is an excellent ROM if your bored with LinageOS. Stable, fast and comes with full OMS support for substratum. During the installation (flash by twrp) it installs the latest stable magisk version by default. I found out that the latest superSU+suhide is much more stable. So I removed magisk and rooted Commotio with SuperSU+suhide, SafetyNet doesn't stand a chance.
Links:
Commotio ROM's for the hiaeuhl here
Magisk removal tool (flashable zip) here
Latest SuperSU by Chainfire (flashable zip) here
Suhide 1.08 by Chainfire (flashable zip) here
Aroma SuperSUconfig 1.00 (flashable zip) here
OpenGApps here
Installation:
1. Clear data and dalvik/cache
2. Flash ROM
3. Flash GApps
4. Remove Magisk or keep it as it is and enjoy your ROM (remove Magisk Manager manually once booted into OS)
5. Flash SuperSUconfig. Choose to disable forced data encryption and install in systemless SBIN mode (important!)
6. Flash latest SuperSU
7. Flash latest suhide
8. Reboot
I want to remind you guys, you have to be on MM firmware with the latest TWRP recovery installed to get this to work.
Enjoy
Click to expand...
Click to collapse
How about the camera working on Commotio ??????in lineage os camera is not working properly.and most of 3rd party camera app not working....
Camera is working fine
Tried latest build on 1.56.401 firmware Encryption unsuccesfull error all the time.
Someone know if in this rom with old firmware the hotspot working?
Hey I'm on the new firmware and I've been trying to follow your instructions here and am failing. I am able to follow you till flashing the magisk uninstaller. Then when I use the aroma installer to config su on the first page i select systemless bin mode(explicitly states for >=8.0) then i disable force encryption and click on next and complete config but when i flash the superuserSU.zip it installs the binary files in the /data/ directory and then the suhide fails to install. am I doing something wrong.?
Namaless said:
Someone know if in this rom with old firmware the hotspot working?
Click to expand...
Click to collapse
newest version woking fine .best rom ever :good: