Based on Samsung Stock Roms for GTI9305:
- Stable and smooth
- Rooted, Deodexed, Zipaligned, Busybox added
- unbranded, boot sound renamed
- without any mods
- new bootloader isn't included!
- 5 Shortcuts possible add on Lockscreen
- defaultly set EN language, multilingual
All next it’s on your own risk!!!
About bootloaders:
- if you ever flash 4.3 or 4.4 via Odin or updated from OTA you have new Bootloader.
- if you bought your device and you dont know what bootloader you have, turn off your phone,reboot to download mode (hold power + volume down +home buttons) and when is there Knox flag 0x1 you have new and you are warranty off. When Knox flag is there 0x0 you have also new bootloader, but you are still in warranty and when you'll flash any custom recovery or unofficial firmware via Odin, you'll have then Knox 0x1 and you will be warranty off - so it's on your deciding. When isn't in download mode any records about about Knox, you still have old bootloader (btw congratulation ) and don't ever flash via Odin 4.3 and higher firmware - it's a pity.
PS: exit from download mode: hold pressed power button cca 5 seconds
Downloads:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1):
Release for old and new bootloader - AGNi Kernel 5.50 with Boeffla Sound:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v5_5BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1):
Release for old and new bootloader - AGNi Kernel 5.00 with Boeffla Sound:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v500BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
-Roms reuploaded 9th November 2014 (fixed modem)
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3):
Release R3 - use on old bootloader - Hbohd kernel v0.2:
I9305XXUFNI3_KK_CWM_R3_Root_DEOdex_Ziplgn_HboKernel_v2.zip
MD5: 30f189d7620db2bed6cf48c34d0400b4
Release R2 - use on new bootloader - Stock Kernel:
I9305XXUFNI3_KK_CWM_R2_Root_DEOdex_Ziplgn_StockKernel.zip
MD5: 3bdcb9bcb3a18f9f7c85c398e2bccd14
Samsung Hub FIX for R2 and R3 HERE .... just flash it, however you'll lose possibility add 5 Short-cuts on Lockscreen
Screenshots - in 2nd post and in attachment
Changelogs - in 3th post
Customize as you like and wish!
- for good improvements I recommend install Wanam Xposed from market
- for cleaning of Bloatware you can use Rom cleaner from S4, guide you will find there, download possible HERE
Installation Instructions:
- first of all backup all your data from internal SD card, 4.3 and 4.4 has different structure tree from 4.1.2!!!
- if you go from 4.1.2 or older I recommend format internal card, if you don’t do it, on internal card were by me still data (DCIM etc...) and you can’t normal access them on 4.3, but even without formatting you can later move them from old folder to new one in 4.3 with Aroma file manager , for me easer way without format. Also is possible, that files will move automatically – also me happened
- be sure, you have EFS backup!!!
- create NanDroid backup to external card!!!
- download the *.zip file to external card!
- download to Recovery, recommended is only PHILz
- ROM isn’t full wipe, but is recommended if you get from any older
- wipe cache and Dalvik cache is automatically included
- select ZIP file from external card and install
- don’t use re-root after installation inside recovery - you don’t need it, if you'll do, then you need install again SU apk from market
- reboot and wait and wait ...
- enjoy it
- IF YOU WILL HAVE PROBLEM WITH ROOT TRY MAKE UPDATE AND APPLY SUPERUSER VIA MARKET ( then open SU and update binary and disable Knox and enjoy), OR RE-ROOT VIA CUSTOM RECOVERY (only PhilZ is recommended), THEN YOU HAVE TO AGAIN INSTALL AND APPLY SUPERUSER APK FROM MARKET.
- ON NEW BOOTLOADER AFTER INSTALLATION I RECOMMEND YOU MAKE STATUS SELINUX PERMISSIVE VIA WANAM XPOSED OR SELinux Mode Changer .....IF YOU WILL NOT MAKE THIS STATUS, ARE EXPECTED PROBLEM WITH ROOT
- If your camera doesn't work primary flash this Camera Patch. It should works . For interesting here are also older instruction: follow this (thanks @Hbohd and @P$T), if you don't have incriminated file flash relevant Stock kernel from HERE - Wifi doesn't work with old bootloader, then take photo and short video, then flash again your Rom without full wipe with kernel which you like. If your camera still doesn't work follow THIS or flash some Rom 4.1.2 (via Recovery or Odin) take picture, grab and backup incriminated files, then flash this Rom and put them to data/cwm. Don't forget backup your SlimISP_XX.bin for future. Problem with camera have only some users - Samsung issue.
Working Modems:
use version for KK from HERE
Info for devs:
If you want use this Rom or part as base for your Rom, Mods, just give me credit with link in your OP
Credits:
@Hbohd for HboKernel...you must give him BIG THX! He is the 1st, who made custom kernel for us on KK 4.4.4
@psndna88 for AGNi kernel
@Chainfire for CF-Auto-Root!
@MaHo_66 for his willingness to test it, feedback and making Screenshots
@FLooDW for his willingness to test it and feedback
- to some others here!
- to Samsung
XDA:DevDB Information
[ROM][GTi9305 LTE version][KK4.4.4] ▌Official Stock Rom ▌, ROM for the Samsung Galaxy S III I9300
Contributors
kenar2
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2015-01-28
Screenshots:
Change log:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1): - 27th January 2015
- version with Stock and AGNi kernel
ROMs I9305XXUFNJ reuploaded - 9th November 2014 (fixed modem)
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1) - 7th November 2014
- version with Stock and AGNi kernel
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R3 - 1st October 2014
- version with HboKernel, primary is R3 for users on old bootloader
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R2 - 30th September 2014
- Stable and smooth
- added all Stock apps
- fixed apks
- improved SU
Initial Release - 29th September 2014
Thanks dude!
Ahh, smaller filesize than 4.3... I'll try clean flashing from aosp, I hope it works and I don't have to flash a 4.1.2 stock rom first or something.
Yes smaller.
From Aosp just full wipe
Edit: R2 is a little larger
Now this is some good news mate :good: gonna download it now and if it boots and all works fine I will use as my official base for S5 Elite
Thanks
EDIT: oke, some feedback on the rom
-boots fine
-wifi works
-had some troubles updating the SU binary, solved applying reroot using philz recovery
-manually pushed supersu.apk to phone and installed, cause play store wouldnt open, giving FC
-updated google play services and rebooted and got 2 or 3 more FC's from google related components
-seems overall nice and smooth
-sometimes freezes when trying to open Super SU app, pressing home button solves it though
-samsung apps are removed i guess, didnt saw it in the rom
So this far of my tests, only google related stuff is not working and to be honest, i dont believe rom will boot if i transfer S5 Elite to this base without a 4.4.4 custom kernel updated, but i'll give it a try anyway
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Edit: i confirm, Samsung apps aren't included, ill add.
Edit2: added to R2, solved all problems
i would help testing but i urgently need gps and my phone working for a few days coz ii have to go somwhere. Sorry for stupid useless post. I will help testing at the end of the weeek
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
bestfil said:
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
Click to expand...
Click to collapse
It doesn't mind, everyone is suitable i think
kenar2 said:
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Samsung apps I'll check. I also don't know, why is missing SMemo and apks which I already added. The same problem with apps are on ported roms for S3 too
Edit: i confirm, Samsung apps arent included, ill add.
Click to expand...
Click to collapse
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Downloaded this version from sammobile 2 days ago... Seems stable.. Also tested this one.. Seems to work fine so far... The camera bug which I kept having constantly on other cm based 4.4.2 seems to bd fixed.. I flashed stock rom before but that didn't even fix the camera, but this one does.
Just curious : any way to remove all the Samsung bloatware with one script or app ?.. Seems to be draining the battery a lot! ?
Sent from my GT-I9305N using Tapatalk
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
MaHo_66 said:
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Click to expand...
Click to collapse
no, no i didnt use them ..... now compiling new version with sasmung apps, and with others missing apps (will be contain the same apps as from Odin) - will solve problem with market too
Edit: and yes, for 4.4.4 must be used stuff from S5 4.4.4 .... I think in S3 threads people works on it
bestfil said:
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
Click to expand...
Click to collapse
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
kenar2 said:
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
Click to expand...
Click to collapse
I still don't understand. I don't know which bootloader do I have.
I used http://forum.xda-developers.com/gal...tock-sgsiii-i9305-prerooted-firmware-t1935570 and it says:
Code:
D:\ANDROID\ANDROID-SDK\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
/system/bin/sh: su: can't execute: Permission denied
126|[email protected]:/ $ getprop ro.boot.bootloader
getprop ro.boot.bootloader
I9305XXBMJ1
[email protected]:/ $
which is propably 4.1.2's Polish ROM = 4.1.2 bootloader.
As far as I understand You say that every bootloader which is not 4.4.4 will make wifi disabled?
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new and you are warranty off. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Edit: for more information you can find here topic about knox and bootloader.
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
---------- Post added at 10:51 PM ---------- Previous post was at 10:44 PM ----------
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes correct, but if i were you i would wait for a decent FW of 4.4.4 with a custom kernel, soon or later we'll get a new kernel one way or another, till then just wait and enjoy other roms. There is nothing special on 4.4.4 and you will be probably dissapointed with the 4.4.4 fw (at least i am) considering we had to wait so long for it...
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes you have old, the best way for you is to wait for custom kernel, @Hbohd already started working on Boeffla
MaHo_66 said:
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
Click to expand...
Click to collapse
Related
This Is Very Important!!! If You Are On BOE1 BOG5 Or BOK3 Bootloaders Do Not Flash Any Firmware Zips Found Here Or In My Other Threads Or Other Threads They May Have Older Bootloaders In Them And They Will Brick Your Phone!!!!! Only Flash The Ones That Specifically Say They Are For BOE1 Or Later Bootloaders!!!
Stock Verizon 5.0 BOG5 Based Lollipop Rom
Features
Rooted/Busybox/Init.d
Deodexed
Fixed Tethering
Fixed Private Mode
Added SBrowser
SD Card Fix
Updated All apps
Download Rom
VZW_BOG5_STOCK_ROM_DEODEXED.zip
VZW_BOG5_STOCK_ROM_ODEXED.zip (Only Flash Dark It Up Themes V3 or Higher)
Paches/Updates
SafeStrap Flashable Firmware Update For This Rom
This will Update Modem And NON-HLOS.bin And Kernel. No bootloaders will be updated, so device can still be downgraded.
BOG5_Firmware_No_Bootloaders.zip
SafeStrap Flashable Kernel For This Rom
G900V_OG5_Stock_KERNEL_SafeStrap-Flashable.zip
Odin Flashable Full Retail Tar Image With BOD5 Bootloaders
If your comming from KitKat or cannot get HD Calling working you may have to flash this VZW_BOG5_RETAIL_FULL_FIRMWARE_WITH_BOD5_BL.tar.zip then activated HD calling then Flash NCG_Rescue_Tar_And_NCG_For_Root.tar and start over with rooting procedure
Install And Upgrade Instructions
All Firmwares and all Instructions for Upgrading from KitKat Or Lollipop rom can be found Here
XDA:DevDB Information
[VZW_Stock Based TW Rom][5.0 Lollipop BOG5 Build Deodexed], ROM for the Verizon Samsung Galaxy S 5
Contributors
jrkruse
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: BOC4 or Higher
Version Information
Status: Stable
Created 2015-08-17
Last Updated 2015-08-16
Extras/Mods/Addons
Themes
VZW_JOKER_THEME_PURPLE_GREEN_V3.zip
(Big thanks to @parkerj7uc and @jimwick for letting me use their stuff go to their thread and thank them)
here are some layers themes that will change launcher grid layout this is not a flashable zip there are three different styles in this zip just add the one you want to the system/vendor/overlay folder.
Launcher_Grid_Layout_Overlays.zip
Screens Shots Here
Red_Dark_It_Up_BOE1_V3.zip
Screenshots
Teal_Dark_It_Up_BOE1_V3.zip
Screenshots
Debloater Zips
Debloater.zip
@jrkruse Today I was like i wonder when Jr will release the newest OG5? You're the man Kruse!
Sent from my SM-G900V using XDA Free mobile app
Happy
I am glad that the best is working hard at making this rom for us.
Haha, yeah, I was wondering what the turnaround time was going to be.
BTW, I found transparent overlays that actually work. This is the first time I applied one that touched framework-res that didn't result in spectacular failure. It's $0.99, but I paid the toll.
https://play.google.com/store/apps/details?id=com.spada.transparent
nice work as usual ... just in case anyone asks i was able to dirty flash from jk's boe1 stk deox without any problems. i just reflashed xposed and rebooted a 2nd time and everything is working great. oh i also used flashfire to flash everything and it worked great (i did wipe cache and dalvik after flashing all 3 files inside flashfire)
it hung up on the verizon animation for several minutes on first boot so be patient..
What order did you flash the files in Flashfire, Splink007? And what version of Flashfire? V19 or the current one?
ejc1214 said:
What order did you flash the files in Flashfire, Splink007? And what version of Flashfire? V19 or the current one?
Click to expand...
Click to collapse
im using flashfire v.21 and i queued the bog5 rom , the og5 kernel and then the firmware and lastly clear dalvik and cache. took about 10 mins to reboot back to loading applications screen and then once i was back up i used flashfire to reload xposed and when it rebooted everything was working in full and all my settings and wanam were up and running. probably the easiest flash evah. probably because i was running the last version of this.
btw this version shows as not vulnerable to stagefright.. so if your looking to close the loophole on your phone this is worth the upgrade
Added odexed version of rom
Added Red Dark It Up Theme will work on both deodex and odex roms
Updated Teel Dark It Up Theme to work with deodex and odexed rom also improved some theming
splink007 said:
btw this version shows as not vulnerable to stagefright.. so if your looking to close the loophole on your phone this is worth the upgrade
Click to expand...
Click to collapse
Not vulnerable to all stagefright problems or just the ones that were in the OG5 update?
There's one that wasn't patched with the update.
I'm trying to upgrade from BOE1 Deodexed using FlashFire 21, but it keeps failing when installing System saying that some symlinks could not be created. It then reboots. Any ideas? I was able to install the firmware but not the ROM.
Thanks a bunch. So it looks like this firmware is safe to flash on the developer edition because it doesn't touch the bootloader. Is this correct? Any help would be appreciated. Thanks.
7bigjohn said:
Thanks a bunch. So it looks like this firmware is safe to flash on the developer edition because it doesn't touch the bootloader. Is this correct? Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
Do not flash any of my firmware packages or firmware zips on Dev edition. They contain bootloaders. The roms zips are fine as they only flash rom and kernels
MekaByte said:
I'm trying to upgrade from BOE1 Deodexed using FlashFire 21, but it keeps failing when installing System saying that some symlinks could not be created. It then reboots. Any ideas? I was able to install the firmware but not the ROM.
Click to expand...
Click to collapse
I use safestrap but I just successfully flashed both odex and deodexed roms using Flashfire, so I would check md5 of zip
I tried downloading three times and the MD5 always matches.
MekaByte said:
I tried downloading three times and the MD5 always matches.
Click to expand...
Click to collapse
Are you on my BOE1 rom? Try uninstalling Flashfire and reinstall it or try safestrap
Flashed OE1 deodexed (from the muniz thread last night) and noticed folks were having issues flashing the deodexed from this thread over that with flashfire.
I am going to give the deodexed one a shot shortly via Flashfire v21
Update; Flashed Successfully
Order of operation in Flashfire v.21 (after setting screen timeout to 10 minutes in System -.> Display)
* BOG5_Firmware.zip (automount unchecked)
* VZW_BOG5_STOCK_ROM_DEODEXED.zip (automount unchecked)
* Wipe Dalvik Cache and Cache partition options selected (uncheck others)
* Reboot Normal as I am coming from OE1
After phone reboots, verizon logo for 3-4 minutes, then "Android is upgrading Optimizing app xxx of 327 " for 7 -8 minutes., then "starting apps" and finally "finishing boot" to home screen.
Build Reported: OG5
Kernel: 3.4.0 July 31 build.
Root: preserved. If coming from OE1, this was not a complete factory reset. Data and apps are preserved.
I am guessing the problems in the other thread are because this ROM needs the firmware first if coming from a muniz stock ROM.
.
jrkruse said:
Do not flash any of my firmware packages or firmware zips on Dev edition. They contain bootloaders. The roms zips are fine as they only flash rom and kernels
Click to expand...
Click to collapse
Thanks a bunch for the clarification. Much appreciated!
I did a dirty flash (wipe dalvik + cache) from muniz_ri's OE1 deodexed to the deodexed OG5 here using Flashfire v0.21, flashed the safestrap update, flashed xposed framework, then debloated/debloated the extra junk that came with OG5. Hotspot is working, and everything seems to be fine.
@jrkruse, what exactly is SBrowser, I've been trying to figure it out, but haven't been able to find any information on it after searching. Also, what is SBrowserTry.apk, I assume it's something I can get rid of? Sounds like some trial or instructions bloat.
Edit: is SBrowser just the stock Samsung browser? Cause it's literally the first time I've seen it.
Spartan117H3 said:
I did a dirty flash (wipe dalvik + cache) from muniz_ri's OE1 deodexed to the deodexed OG5 here using Flashfire v0.21, flashed the safestrap update, flashed xposed framework, then debloated/debloated the extra junk that came with OG5. Hotspot is working, and everything seems to be fine.
@jrkruse, what exactly is SBrowser, I've been trying to figure it out, but haven't been able to find any information on it after searching. Also, what is SBrowserTry.apk, I assume it's something I can get rid of? Sounds like some trial or instructions bloat.
Click to expand...
Click to collapse
Sbrowser is the stock Internet browser that for some reason isn't available on Verizon roms. You can delete the Sbrowsertry apk I'm not sure what it does but Sbrowser seems to work without it
[ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_001_Stock Marshmallow - Test Full Stock.
[ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_1.5.DevEDGE
Updata 04.02.16:
Add [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_1.5.DevEDGE - 925F odex
Add all updata from 920F 1.5ProDev
Updata 01.02.16: MOD Extended reboot menu.
[MOD] APM_925_aTerminator_6.0.1
Updata 29.01.16: MOD.
1. Disable High volume warning headphones.
2. Disabled illuminate the screen when connected to a power supply.
[MOD] Disable_High_vol._war._headph._925F.zip
Install from Recovery.
Updata 28.01.16:
De-bloated, CSC tweaks, Updated Apps,
Removed Bloatware Samsung from market,
Removed Bloatware Google from market,
Disabled Signature Verification Checking of packages in code,
KNOX fully removed,
Native Call Recording,
Enable Call Button in call log list,
Messaging time stamps to it's original time,
Enable Call Button in call log list,
Call/Message blocking Settings entry,
Message 999 recipient limit,
Exit button in the Samsung internet Browser,
Vibrate on call answering,
Camera shutter sound button in the Samsung Camera app,
Call/Message blocking Settings entry,
Removed All crash monitors and bugreports services,
Removed all services of device automation test,
Cleaned and symplifired some system scenarios,
All stock and some others apps in MultiWindow,
New ringtones, notifaction, UI,
Increase the volume of sound in the speakers or headphones.
Updata 27.01.16: 001. boot.img 6.0.1, new modem.
Description and ROM Details:
Clean, Fast, Stable, Smooth.
BOOT.IMG_G925F_3ZPA1_6.0.1_Stock.tar.md5
MORE and Downlouds.
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
# Install TW Android 6.0 BETA Rom - G925F
(Can be installed from any base !)
Download: http://samfirm.net/threads/beta-gala...-01-15-2015.6/
- Copy G925F_3ZOL6-M(6.0)_Flashable.zip to your devices
- Copy BETA-SuperSU-v2.66_Edition.zip to your devices (option)
- Into Download mode flash BOOTLOADER_G925FXXU3COI9-L(5.1.1).tar (BL) & TWRP-2.8.7.0_G925F.tar (AP) via Odin
- Into Recovery
- Install G925F_3ZOL6-M(6.0)_Flashable.zip
- Install BETA-SuperSU-v2.66_Edition.zip (option)
- Into Download mode, flash BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar via Odin (BL)
- Reboot (10 minutes for first booting !)
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Sent from my SM-G920F using XDA Premium 4 mobile app
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YES
any luck wit SM-G925i?
can i try this in my G925i .?
nisarpari said:
can i try this in my G925i .?
Click to expand...
Click to collapse
No.
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
# Install TW Android 6.0 BETA Rom - G925F
(Can be installed from any base !)
Download: http://samfirm.net/threads/beta-gala...-01-15-2015.6/
- Copy G925F_3ZOL6-M(6.0)_Flashable.zip to your devices
- Copy BETA-SuperSU-v2.66_Edition.zip to your devices (option)
- Into Download mode flash BOOTLOADER_G925FXXU3COI9-L(5.1.1).tar (BL) & TWRP-2.8.7.0_G925F.tar (AP) via Odin
- Into Recovery
- Install G925F_3ZOL6-M(6.0)_Flashable.zip
- Install BETA-SuperSU-v2.66_Edition.zip (option)
- Into Download mode, flash BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar via Odin (BL)
- Reboot (10 minutes for first booting !)
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Xposed work well here (odex version)
Sent from my SM-G925F using Tapatalk
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Yes. 6.0 is not needed.
Click to expand...
Click to collapse
AlexMailOne said:
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Yes. 6.0 is not needed.
Click to expand...
Click to collapse
Perfect.. Tonight I'll try ??
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi,
Where is link for [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_000_Stock Marshmallow- Test Full Stock. ?
edit : find
stefauresi said:
hi,
Where is link for [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_000_Stock Marshmallow- Test Full Stock. ?
edit : find
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24391638059057160
But which Bootloader do I flash last (in Odin), the BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar, used in the 6.0 Beta thread for the G925F?
Awesome news, thanl's a lot
MartiDiamond said:
But which Bootloader do I flash last (in Odin), the BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar, used in the 6.0 Beta thread for the G925F?
Click to expand...
Click to collapse
Yes. Maybe the kernel need to flash separately from 925 6.0.1.
With the 920F bootloaders in the thread over at the regular forum, ROM was booting fine, but in the OS everything would be weird, drivers failing, phone had a charge of 4678% or something. With the 925F bootloader it wouldn't boot at all. I'm back to 6.0 until it's clear what bootloader to use.
EDIT: Just saw your post. I'll try the separate kernel tomorrow then, hope the old 6.0 will boot.
Which kernel are you referring to?
MartiDiamond said:
With the 920F bootloaders in the thread over at the regular forum, ROM was booting fine, but in the OS everything would be weird, drivers failing, phone had a charge of 4678% or something. With the 925F bootloader it wouldn't boot at all. I'm back to 6.0 until it's clear what bootloader to use.
EDIT: Just saw your post. I'll try the separate kernel tomorrow then, hope the old 6.0 will boot.
Which kernel are you referring to?
Click to expand...
Click to collapse
The core (boot.img) of which [ROM] is not most new for 925. I couldn't check because I don't have 925 in the device.
AlexMailOne said:
The core (boot.img) of which [ROM] is not most new for 925. I couldn't check because I don't have 925 in the device.
Click to expand...
Click to collapse
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
MartiDiamond said:
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
Click to expand...
Click to collapse
The right decision is to ask on the forum who installed the OTA update to 6.0.1 and get out boot .img backup via recovery.
Let me know after if will give boot.img and I will make a via Odin.
AlexMailOne said:
The right decision is to ask on the forum who installed the OTA update to 6.0.1 and get out boot .img backup via recovery.
Let me know after if will give boot.img and I will make a via Odin.
Click to expand...
Click to collapse
They use a backup to get the new software. It's too risky for me. I will just wait for an easier way to flash.
MartiDiamond said:
They use a backup to get the new software. It's too risky for me. I will just wait for an easier way to flash.
Click to expand...
Click to collapse
Add boot.img 6.0.1_925F.tar. via Odin.
MartiDiamond said:
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
Click to expand...
Click to collapse
Did you use the 925F 6.0 bootloader? This is the one I've used and I'm getting the 4000% battery and failing drivers.
EDIT: no wifi connection either
Hi tastynOOgat Users,
This is the continuation of NCSROM called tastynOOgat and is based on Android 7.0.
The builds always contain a complete clean and refreshed state, before uploading, if the thime give the possibility to do that.
Changelogs: planned, will store only links here for feature, to not fill too much in my threads.
tastynOOgat v2.0 build: B389
- not prerooted, choose what in your mind if SuperSU oder Magisk
- busybox
- deodexed / zipaligned
- Playstore 8+
- removed /updated some apps
- bugs? you tell me
Download L19
Download L09 Patch
tastynOOgat v1.0 build: B381
- not prerooted, cause of bugs by pack boot.img, use SuperSU for EMUI5 instead. Not forget to use latest TWRP, or it won't work.
- latest Busybox
- Deodexed + Zipaligned
- No Bloatware
- Playstore 7+
- removed google apps
- no bugs
Download
tastynOOgat Pre: B380 adaption of B381 cause no ota yet to update
- Stock kernel, verity removed, root by yourself
- Changelog as B381
Download
Userguide:
Marshmallow
Update from any Custom ROM or old firmware to latest MM firmware through ota or dload to gain the Nougat upgrade, theres no other methods than this.
Unlock bootloader and flash twrp for N 3.1......
resume right away with point 1
Nougat
1. A Custom ROM always needs the latest twrp + firmware installed before flashing to bypass driver changes made by huawei or it can cause errors or bootloops. It might working on some versions until they change something under the hood, then its necessary to update with dload.
2. Go to twrp, wipe -> Adwanced Wipe
3. Wipe this: Cust, Data, Internal Storage, System, Vendor, Product and Version to have a clean start
4. Flash the firmware you have downloaded.
5. Don't worry about mountencrypt error, it all works well.*
6. Flash SuperSU after you find here
7. Done
*Huawei binarys working a bit different than we use, but we can't avoid them until we have a better solution.
XDA:DevDB Information
[FRD][L09/19][C432][7.0] tastynOOgat v2.0 (07.13.17), ROM for the Honor 8
Contributors
dkionline
ROM OS Version: 7.x Nougat
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2017-07-13
Current Beta Version: B389
Beta Release Date: 2017-07-13
Created 2017-04-12
Last Updated 2017-07-17
dev 01
dev 02
thanks for your work
Does this rom have any features not on stock ?
nyc job tysm
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Anonshe said:
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Click to expand...
Click to collapse
Hey, the thing is you need to update to L09C432B381.
Propably upgrade or fullwipe. In that state you won't see changed build.
DeathKX said:
Hey, the thing is you need to update to L09C432B381.
Click to expand...
Click to collapse
To be fair nobody on the forum managed to flash the B381 yet.
How stable is this rom and can this be used as dailydriver yet?
SpeaqerDev said:
How stable is this rom and can this be used as dailydriver yet?
Click to expand...
Click to collapse
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
you can also add this mod
https://forum.xda-developers.com/honor-8/themes/mod-camera-mod-enhanced-camera-jordon-f-t3574566
johnhux7 said:
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
Click to expand...
Click to collapse
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
SpeaqerDev said:
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
Click to expand...
Click to collapse
I really don't know.
It seams a bit pointless at the mo.
We have a ROM that nobody can use
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
dkionline said:
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
Click to expand...
Click to collapse
From what i can see this is not working on 380.
U will have to wait till 381 is released for us to be able to use it
I can instal in FRD-AL00
???
aureliomilitao said:
I can instal in FRD-AL00
???
Click to expand...
Click to collapse
No, sorry.
What is the point of this rom if nobody can use it?
Welcome to S4 Unified Guides!This thread now redirects to here.
⬇
Welcome to S4 Unified Collection!
FIRMWARES
Quick Tutorial:
Download the Firmware for your variant, run Odin as administrator, put the file with Firmware to AP section, Flash! Wait for the device to boot to system and Done!
Note: For Stock Rom to have your WiFi working you need to have the same version of Modem/BL as your Firmware. For example if you have QK1 Stock ROM then you need to have QK1 Modem/Bootloader. On Custom ROMs doesn't matter. You can have any Modem/BL of your variant you want but recommend is always the latest.
You can find the latest Firmware for your variant below:
GT-I9295 (jactivelte): I9295XXSDQD6 / Build Date: 2017-04-20 / OS: Lollipop 5.0.1
GT-I9500 (ja3gxx): I9500XXUHQD1 / Build Date: 2017-04-25 / OS: Lollipop 5.0.1
GT-I9505 (jfltexx): I9505XXUHQK1 / Build Date: 2017-11-09 / OS: Lollipop 5.0.1
GT-I9505G (jgedlte): I9505GUEUDPF1 / Build Date: 2016-05-13 / OS: Lollipop 5.1.1
GT-I9506 (ks01lte): I9506XXUDRB1 / Build Date: 2018-02-15 / OS: Lollipop 5.0.1
GT-I9515 (jfvelte): I9515XXS1BQD2 / Build Date: 2017-04-17 / OS: Lollipop 5.0.1
GT-I9515L (jfvelte): I9515LUBU1BQF1 / Build Date: 2017-06-08 / OS: Lollipop 5.0.1
SCH-I545 (jfltevzw): VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra): I545LWWSGQA1 / Build Date: 2017-01-05 / OS: Lollipop 5.0.1
SCH-R970 (jflteusc): R970TYSGPL1 / Build Date: 2016-12-02 / OS: Lollipop 5.0.1
SCH-R970C (jfltecri): R970CVRUFND1 / Build Date: 2014-04-11 / OS: KitKat 4.4.2
SCH-R970X (jfltecsp): R970XWWSGQA1 / Build Date: 2017-01-05 / OS: Lollipop 5.0.1
SGH-I337 (jflteatt): AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan): I337MVLSGQB1 / Build Date: 2017-02-09 / OS: Lollipop 5.0.1
SGH-M919 (jfltemo): M919UVSFQA1 / Build Date: 2017-01-04 / OS: KitKat 4.4.4
SM-S975L (TracFone-StraightTalk): S975LUDUANB1 / Build Date: 2014-02-04 / OS: Jelly Bean 4.3
SPH-L720 (jfltespr): L720VPSGPL1 / Build Date: 2016-12-20 / OS: Lollipop 5.0.1
MODEMS & BOOTLOADERS
Quick Tutorial:
You can flash Bootloader & Modem with two methods:
First and Recommended Method COMBINED: Download the COMBINED BOOTLOADER _MODEM.tar, run Odin as administrator, put the COMBINED BOOTLOADER_MODEM.tar to AP section, untick Auto-Reboot, flash! When It's done, reboot your device by pressing Power Button for couple of seconds.
Second Method SEPERATE: Download the Seperate BOOTLOADER and MODEM .tars, run Odin as administrator, put the BOOTLOADER to BL section and MODEM to CP section, untick Auto-Reboot, flash! When It's done, reboot your device by pressing Power Button for couple of seconds.
Check what version of Modem and Bootloader you have with apps like Inware, Device Info HW or Phone Info.
If Modem & Bootloader didn't changed to the version you wanted, do the same steps again with the method you have selected.
If for some reason Odin failed to flash, make sure your run Odin as adminstrator, try to change USB Port in your PC and don't move the cable during flash. Also if you have Odin and the files on an External hard drive, move Odin and all the files you want to flash, into one folder to your Main Drive for example C: drive.
Note: For Stock Rom to have your WiFi working you need to have the same version of Modem/BL as your Firmware. For example if you have QK1 Stock ROM then you need to have QK1 Modem/Bootloader. On Custom ROMs doesn't matter. You can have any Modem/BL of your variant you want but recommend is always the latest.
You can find the latest Bootloader & Modem for your variant below:
GT-I9295 (jactivelte): I9295XXSDQD6 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9500 (ja3gxx): I9500DXUHPB1 MODEM
GT-I9505 (jfltexx): I9505XXUHQK1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9505G (jgedlte): I9505GUEUDPF1 MODEM
GT-I9506 (ks01lte): I9506XXUDRB1_I9506XXUDRA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9515 (jfvelte): I9515XXU1BQD2 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9515L (jfvelte): I9515LUBU1BQF1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SCH-I545 (jfltevzw): VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra): I545LWWSGQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SCH-R970 (jflteusc): R970TYSGPL1 COMBINED BOOTLOADER & MODEM / BOOTLAODER - MODEM
SCH-R970C (jfltecri): R970CVRUFND1 COMBINED BOOTLAODER & MODEM / BOOTLOADER - MODEM
SCH-R970X (jfltecsp): R970XWWSGQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SGH-I337 (jflteatt): AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan): I337MVLSGQB1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SGH-M919 (jfltemo): M919UVSFQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SM-S975L (TracFone-StraightTalk): S975LUDUANB1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SPH-L720 (jfltespr): L720VPSGPL1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
TWRP Recovery 🛠
Quick Tutorial:
Installation Process:
Without any custom recovery installed on your device: Download the .tar file of the TWRP to your PC.
Reboot to Download Mode (power button+vol.down+home button), run Odin as adminstrator, connect your device to PC, put the .tar file of TWRP in AP section, untick Auto-Reboot in options and flash.
Done! Restart to TWRP Recovery. (power button+vol.up+home button)
With TWRP already installed to your device (UPDATE to latest version): Download the .img file of the TWRP version you have selected.
Reboot to TWRP (power button+vol.up+home button) and press Install--->Install Image--->Navigate to .img file you downloaded before---->Flash.
Done!
The list below contains the variants which can use the latest Unified Official TWRP Recovery or JDCTeam TWRP Recovery:
GT-I9505 (jfltexx)
GT-I9505G (jgedlte)
GT-I9507 (jtfddxx)
GT-I9508 (jfltezm)
SCH-I545 (jfltevzw)
SCH-I545L (jfltelra)
SCH-R970 - jflteusc
SCH-R970C (jfltecri)
SCH-R970X (jfltecsp)
SGH-I337M (jftlecan)
SGH-M919 (jfltemo)
SM-S975L (TracFone-StraightTalk)
SPH-L720 (jfltespr)
The list below contains the variants which need a specific TWRP Recovery version:
GT-I9295 (jactivelte): Official TWRP Recovery
GT-I9500 (ja3gxx): Official TWRP Recovery
GT-I9506 (ks01lte): Official TWRP Recovery
GT-I9515 (jfvelte): Official TWRP Recovery
GT-I9515L (jfvelte): Official TWRP Recovery
SGH-I337 (jflteatt): TWRP Recovery Locki Patched by mattgyver
GAPPS
Quick Tutorial:
You should always use Pico or Nano GApps, be sure you have selected Platform: ARM and the proper Android version of the ROM you are going to flash. If the ROM you want to flash include GApps, no need to download and flash any GApps at all.
Open GApps
BiTGApps
NikGApps
MAGISK ROOT SOLUTION
Quick Tutorial:
The easiest way to root your device is via Magisk, it should work in all ROMs, Stock and Customs.
However if you are gonna use ROM based on LineageOS and don't want to use any Magisk Module, recommended is to use the LineageOS AddonSU.
From LineageOS 17.1 onwards, LineageOS is dropping its own superuser implementation, making Magisk the de facto solution! You can find infos here.
Steps to Root via Magisk:
1. Download the latest Magisk version.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded.
3. Done. Magisk Manager App should be installed, if not install it manually.
Steps to Unroot Magisk:
1. Download the latest Unistaller Magisk version.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded.
3. Done. Magisk Manager App should be also unistalled.
Steps to Root via LineageOS SU Addon if you use LineageOS ROM.
1. Download the LineageOS AddonSU and select arm and the proper android version of the rom you have.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded. Next, Reboot to System.
3. Go to Settings--->About Phone--->Tap 7 times in Build Number to Enable Developer Options. Then go Settings--->System--->Developer Options--->Enable Root from there--->Done!
Steps to Unroot via LineageOS AddonSU Unistaller.
1. Download the LineageOS AddonSU Unistaller and select arm and the proper android version of the rom you have.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded. Next, Reboot to System.
3. Go Settings--->System--->Developer Options--->Disable Root from there--->Done!
PIT FILES
Quick Tutorial:
If you messed the partitions of your device, you can fix it by simply flashing the PIT FILE for your variant via Odin in the PIT TAB.
The list below contains PIT FILES for some variants:
GT-I9500 (ja3gxx) PIT FILE
GT-I9505 (jftlexx) PIT FILE
SAMSUNG USB DRIVER
Quick Tutorial:
If you have a problem while you connect the device to your PC and PC can't recognize it, you may miss the Samsung USB DRIVER. To fix follow these steps:
1. Download SAMSUNG USB DRIVER.
2. Unzip it and install it to your PC.
3. Connect your device and done! Now should be ok.
ODIN
You can download ODIN HERE. Recommened version is Odin 3.12.3
USEFUL APPS
If for some reason you can't find/install an app on Google Play Store due country restrictions or anything, you can sideload the app from APKMirror.
Adaway: Open Source ad blocker for Android using the hosts file.
Aegis Authenticator: Aegis Authenticator is a free, secure and open source app for Android to manage your 2-step verification tokens for your online services.
Brave Browser: Open Source Privacy Browser with built-in adblock.
Bromite: Bromite is a open source Chromium fork with ad blocking and enhanced privacy.
FairEmail: Fully featured, open source, privacy oriented email app.
Franco Kernel Manager: Complete toolbox for all devices with a rich feature set aimed for ease of use to supercharge your kernel.
Inware: Inware allows you to know your device in detail. You can find information about your device's hardware and software, in a new modern UI.
KeepassDX: KeePassDX is a free open source password manager for Android, which helps you to manage your passwords in a secure way.
MiXplorer: Fully-featured File Manager.
Naptime: Lowers your device's power consumption while the display is off by empowering Android's built-in doze power saving functionality.
NewPipe: Open Source Youtube alternative platform without ads.
Shade Launcher: Make your phone feel like home. Free, open source, no ads.
Signal: Signal is a free and open source software application for Android, iOS and Desktop that employs end-to-end encryption , allowing users to send end-to-end encrypted group, text, picture, and audio & video messages, and have encrypted phone conversations between Signal users.
Simple Mobile Tools: A group of simple, open source Android apps without ads and unnecessary permissions, with customizable widgets.
SysLog: Open Source tool for quickly taking and sharing system logs.
Today Weather: Today Weather is a beautiful & simple-to-use weather app that provides the world's most accurate local weather forecasts.
Youtube Vanced: Vanced is a well known modded version of YouTube with many features such as adblocking, background playback and many many more.
RECOMMENDED ROMS
Recommend ROMs for the variants below, are any of JDCTeam ROMs with tags [Live] [Stable] [Daily Driver] or Official LineageOS 17.1
GT-I9505 (jfltexx)
GT-I9505G (jgedlte)
GT-I9507 (jtfddxx)
GT-I9508 (jfltezm)
GT-I9515 (jfvelte)
GT-I9515L (jfvelte)
SCH-I545 (jfltevzw) VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra)
SCH-R970 - jflteusc
SCH-R970C (jfltecri)
SCH-R970X (jfltecsp)
SGH-I337 (jflteatt) AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan)
SGH-M919 (jfltemo)
SM-S975L (TracFone-StraightTalk)
SPH-L720 (jfltespr)
Recommened ROMs for the variants below are:
GT-I9295 (jactivelte): Official LineageOS 17.1
GT-I9500 (ja3gxx): -
GT-I9506 (ks01lte): Unofficial LineageOS 17.1, Unofficial crDroid or Official HAVOC OS
JDCTeam Universe
Here you can find the work of JDCTeam over the years for our S4 device!
SUPPORT THE DEVELOPERS WHO KEEPING S4 ALIVE
Side -> Support Buff99 -> Support
reserved
Great job, my friend! :good:
sjamie said:
Great job, my friend! :good:
Click to expand...
Click to collapse
Thanks a lot bro! :highfive:
Retrial said:
reserved
Click to expand...
Click to collapse
You should mention that downloading and installing of g-apps is not necessary in most cases. F-Droid is a really good alternative market. And if you still need apps not available on f-droid you may use yalp or aurora...
And if you depend on some google services microG may be a good solution for you, especially in the flavour of NanoDroid.
guest4711 said:
You should mention that downloading and installing of g-apps is not necessary in most cases. F-Droid is a really good alternative market. And if you still need apps not available on f-droid you may use yalp or aurora...
And if you depend on some google services microG may be a good solution for you, especially in the flavour of NanoDroid.
Click to expand...
Click to collapse
Hi,
For an average user, GApps is recommended so the device can be fully functional with access to the main Google Play market and to avoid "issues". For example, push notifications to work in Pie need Google Services etc.
I agree, F-Droid is a good alternative market but some apps may missing from there. About microG and NanoDroid I am not a fun.
However, I want to mention the alternatives options but unfortunately I have hit the maximum words I can contain to OP. I am thinking to split OP to two posts but I am not sure yet, I will see how I will do it.
Btw at reserved posts, will be included Battery Save tips and more.
Thanks for your suggestions.
In your lists of variants (bootloader etc.), I don't see SM-S975L. Has this variant been dropped?
LaughingDog9 said:
In your lists of variants (bootloader etc.), I don't see SM-S975L. Has this variant been dropped?
Click to expand...
Click to collapse
Sry if I miss it, there are so many variants...
Thanks for mention it, I will take a look and I will add it soon.
Retrial said:
Sry if I miss it, there are so many variants...
Thanks for mention it, I will take a look and I will add it soon.
Click to expand...
Click to collapse
No worries! I can see it's a big task to keep track of everything!
Thanks for all of your efforts, and the help those efforts bring to us all.
Sorry. In my school they only taught Russian, but there are translators. Stupid to ask but have to. I have s4 9505 variable modem and bootloder from I9505XXUHOJ2 to XXUHQK1. Now I don't have LTE only EDGE. I know for you builders to laugh and for me a riddle so I am asking builders for a tip that I would come back to LTE.
Wi-fi enabled is ok, just outside edge
kurkawodna said:
Glupio pytac ale trzeba. Mam s4 9505 zmienilem modem i bootloder z I9505XXUHOJ2 na XXUHQK1 Teraz nie mam LTE tylko E. Wiem dla Was budowniczych to smiech a dla mnie zagadka wiec prosze budowniczych o wskazowke zebym wrocil na lte
Click to expand...
Click to collapse
Welcome to XDA and this forum. Here on XDA we use the English language. But a lot (most?) of us aren't native English speakers. And automated translations sometimes aren't clear and correct. So it is good practice to try to translate your text to English and doublecheck the translation yourself. And to add your original text for native speakers, too, if in doubt...
kurkawodna said:
Sorry. In my school they only taught Russian, but there are translators. Stupid to ask but have to. I have s4 9505 variable modem and bootloder from I9505XXUHOJ2 to XXUHQK1. Now I don't have LTE only EDGE. I know for you builders to laugh and for me a riddle so I am asking builders for a tip that I would come back to LTE.
Wi-fi enabled is ok, just outside edge
Click to expand...
Click to collapse
Make sure you have the same Firmware version as your Modem & Bootloader version. If you have flashed QK1 Modem and Bootloader then you need to flash QK1 Firmware.
Retrial said:
Make sure you have the same Firmware version as your Modem & Bootloader version. If you have flashed QK1 Modem and Bootloader then you need to flash QK1 Firmware.
Click to expand...
Click to collapse
As I mentioned, English is a translator. QK1 Firmware need to be installed after changing the modem and bootloder? This is for Croatia and Austria. Is Polish in your settings? Clean and upload v12.1? I guess the questions are at child level but I am asking for help anyway. After all upload v12.1?
kurkawodna said:
As I mentioned, English is a translator. QK1 Firmware need to be installed after changing the modem and bootloder? This is for Croatia and Austria. Is Polish in your settings? Clean and upload v12.1? I guess the questions are at child level but I am asking for help anyway.
Click to expand...
Click to collapse
Doesn't matter if you flash Firmware after or before. Your Modem and Bootloader will stay as it is, unless you flash again different Modem & Bootloader.
Country doesn't matter, you will find your language in settings.
What do you mean "clean and upload v12.1"?
Don't worry, ask anything you want. I will try to help.
Retrial said:
Doesn't matter if you flash Firmware after or before. Your Modem and Bootloader will stay as it is, unless you flash again different Modem & Bootloader.
Country doesn't matter, you will find your language in settings.
What do you mean "clean and upload v12.1"?
Don't worry, ask anything you want. I will try to help.
Click to expand...
Click to collapse
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
kurkawodna said:
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
Click to expand...
Click to collapse
I don't really understand what you wanna do.
You can find everything in my guides and collection in OP and post #2.
What is v12.1 you are talking about? Optimized LineageOS v12.1? You wanna flash that ROM or you want to flash Stock ROM?
What ROM do you use right now and what you wanna do?
Retrial said:
I don't really understand what you wanna do.
You can find everything in my guides and collection in OP and post #2.
What is v12.1 you are talking about? Optimized LineageOS v12.1? You wanna flash that ROM or you want to flash Stock ROM?
What ROM do you use right now and what you wanna do?
Click to expand...
Click to collapse
I was on LineageOS16.0 on XXUHOJ2 versions up to 11 I had no problem with LTE. With version 12 there was a suggestion to change the boot and modem to XXUHQK1. I did it and I don't have LTE but only EDGE. I ask what I did wrong because obviously the fault was on my side? I want to have this soft but with LTE.
kurkawodna said:
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
Click to expand...
Click to collapse
Do you mean S4 mini when you speak about small S4? This device isn't i9505 aka jfltexx.
Perhaps you should look at https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-lineageos-16-0-s4-mini-t3833063 or it parent forum.
guest4711 said:
Do you mean S4 mini when you speak about small S4? This device isn't i9505 aka jfltexx.
Perhaps you should look at https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-lineageos-16-0-s4-mini-t3833063 or it parent forum.
Click to expand...
Click to collapse
No. S4 i9505 LTE. Writing small I meant the difference in the size of current phones.
[ROM][OneUI][Pie][KNOX][MAGISK][SM-J600G]
I simply took the Stock ROM, added some personal touches, and made it flashable via TWRP
- Based on Stock Pie U3 BL
This is JUST STOCK OneUI "OFFICIAL" for the J6, DO NOT EXPECT EXTRA FEATURES!
Also, I debloated it, however it can be debloated further if you wish.
BUT
I want to make something clear. If you have not read this and this allow me to summarize
Pie brings new locks to the table, something far worse than RMM lock. If you flash Pie officially, either via OTA or via Odin, these new locks MAY prevent you from rooting, as I understand it.
The workaround is to flash Pie but with Oreo BL.
HOWEVER
Samsung has easily made Pie only boot with Pie BL with a recent update containing the U4 bootloader version.
This ROM is confirmed to work on U4 BL:
Making it impossible users who upgraded to go back to official Oreo via Odin.
So... for now... DO NOT
UPLOAD YOUR BOOTLOADER TO PIE YET OR YOU WILL NOT BE ABLE TO ROOT OR FLASH CUSTOM BINARY ANYMORE!
And this is where this zip comes in handy!
This ZIP will not change your BL (it will keep your current) and included is a kernel (Helios Pie kernel) that fixes small issues. Also, if anything were to go wrong, you still have TWRP to backup and restore, how awesome is that?
So, you have been warned!
Downloads:
Android File Host
Instructions:
-Create a backup (just in case)
-Wipe system and data
-Flash zip
-Reboot and wait 10 minutes
If after 10 minutes, it is still in logo, force a reboot (Hold VOL +, VOL - and POWER) and then the ROM will work
"Features":
- Official Pie!
- Most knox services working (SPass, Secure Folder, Samsung Health...)
For SPass, just go to Settings->Biometrics->Fingerprint and enable the toggles
- In theory, should not have major bugs
- Helios v3.1 Kernel
- Pre-rooted with Magisk
- Debloated
If you appreciate having Pie with a beautiful and awesome kernel please consider a donation to ananjaser1211, who was kind enough to compile Helios Pie kernel without even having the device!!!
@ananjaser1211 for compiling Pie kernel for the J6... without even having the device! Amazing job!
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
XDA:DevDB Information
Stock OneUI for J6, ROM for the Samsung Galaxy J
Contributors
Alando123, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-10-21
Last Updated 2019-10-21
IM SO HHAPPY , been looking for 3 Weeks or more and i finally found this Incredible ROM I really just Registered so i can really Thank you all of you Guys, REALLY THANKS . i tried many but this is it....for samsung j600G dont doubt about it guys, This Custome Rom is just AWESOME ..no issues at all, feels like butter or like new phone plus is already rooted with magisk , and dont forget this awesome kernel my god all this gobernors and features just love it ,beside the interface is awesome how nice just log in and a beautifull image shows when i unlock ,totally compatible with everything on it and i keep finding more awesome stuff in this ROM. BELIEVE ME , IF YOU HAVE A SAMSUNG J600G . this is the only ROM you need. im so greatfull , this version comes with magisk 19.0 v so dont upgrade magisk or you get a no compatible window every time you open app magisk , even with that root works great even if you upgrade so no worries at all , YOU MAY NEED TWRP LASTES 3.5.1.9 unoffical all galaxys version ,you find it here THANK YOU VERY MUCH AGAIN GUYS IM SO PLEASED