Database Info

[ROMS][7.1.2][d838] Resurrection Remix N, LineageOS 14.1, Mokee N[stable]

Disclaimer:
/* **Your warranty is now void.** * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. * */
Resurrection Remix N
This rom is for D838 variant, maybe works on others, but I have not tested.
Working:
-Wifi
-Ril
-Camera (rear, front, video)
-Sound
-SDCard
-DT2W (Double tap to wake)
-Bluetooth
-NFC
Bugs:
-Tell me
LineageOS 14.1
Working:
-same as RR N
Bugs:
-same as RR N
Installation:
-same as RR N
Downloads:
Latest builds:
Mokee June Update:
-June security patch level
-Kernel and device tree updates
link : https://drive.google.com/open?id=1etfqN8e1C5VxvBdtyJmuSuDkIxRTg2vh
Mokee May Update:
-May security patch level
-Kernel and device tree updates
-Enabled zRam
link : https://drive.google.com/open?id=1El4BRvm0ehAMm7TzA1EiiHfRPYGDNGKr
February updates: (MOKEE N, LINEAGEOS 14.1, RR N
Download
Changelog:
-Kernel and device tree updates
-New governors and IO schedulers
-February security patch and ROM updates
(I'm gonna update RR and LineageOS soon)
December update:
https://drive.google.com/open?id=1jHwwNxaMJ91-iTOuSqm0jYRjzSuJO3jK[/SIZE][/B]
Only LineageOS is rooted, for other roms flash magisk.
Changelog:
-Kernel, device tree, rom updates
-December security patch level
Resurrection Remix N
RR-N-v5.8.5 20171010
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiD62G-CtstEulJu0
news: RR updates, kernel updates, October security patch, etc
This is final build of RR based on Nougat
Lineage
lineage-14.1-20171013
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiEArgg1WboOrj7B_
news: LineageOS updates, kernel updates, October security patch
This is final build of LineageOS based on Nougat[/B]
Installation:
You need twrp recovery by @xenius9 : https://forum.xda-developers.com/lg-g-pro-2/development/twrp-recovery-lg-g-pro-2-t3318686
1. MAKE BACKUP!!!
2. Push baseband , ROM and gapps to sdcard (copy cm13 zip and LP Baseband to sd card)
3. Make WIPE dalvik, data,cache(from recovery)(advanced wipe in twrp)
4. Install lollipop baseband
5. Install ROM
6. Install gapps
Additional links:
KK Baseband and kernel - https://yadi.sk/d/nVx3rb7MpheN9
LP Baseband and kernel(bumped)+KK bootloader - https://yadi.sk/d/_hz4jdQhpheNn
How to Restore previous ROM:
1. if you have KK based Rom - flash KK Baseband and restore ROM from Recovery
2. if you have LP based Rom - flash LP Baseband and restore ROM from Recovery
How to install twrp on kitkat:
1. You need ROOT
2. Download and install this apk: https://drive.google.com/file/d/0B4kfGU1z_PCla2pxMW9ZZWgzX3M/view?usp=sharing
3. Download updated TWRP zip and put to internal storage or sdcard: https://drive.google.com/file/d/0B0LH2ajSZjDpalVsQmpoTDBfTUE/view
4. Open installed app, grant root access, flash recovery
5. Reboot into recovery (via apk or power off phone, press power and volume down button until lg logo come up, release buttons for one second than press volume up and volume down, select yes and again yes. This will not erase your memory if you have TWRP flashed)
6. Flash updated TWRP
7. Reboot into recovery again
How to install TWRP on lollipop:
1. Need ROOT
2. Download and install LG drivers from here : https://drive.google.com/file/d/0B4kfGU1z_PClSWVlY0FGWWJoVFE/view?usp=sharing
3. Download and extract this files: https://drive.google.com/file/d/0B4kfGU1z_PClQ3AyM2lKOGR1S3M/view?usp=sharing
4. Enable usb debugging under developer options
5. Connect phone to pc via MTP
6. Run d838recovery.bat (You will see chinese language, just press any button to flash recovery)
7. Allow usb debugging and grant root access
8. DO NOT REMOVE USB CABLE
9. After finishing process press any key to reboot into TWRP recovery
TWRP 3.2.1-0
link: https://drive.google.com/file/d/1ADfHyz8ii6w_QErKkzhrKexTQ4a6cAXp/view?usp=sharing
to update from older twrp just flash zip
Recommended GAPPS (google apps) : http://opengapps.org/
Older builds
RR
link: https://drive.google.com/file/d/0B4kfGU1z_PClbmJUTkdGUnpYYlU/view?usp=sharing
Lineage
link: https://drive.google.com/open?id=0B4kfGU1z_PClbURaNm5ST1FMeVE
lineage-14.1-20170624
link: https://drive.google.com/file/d/0B4kfGU1z_PClRk5XV0pSS0hfMk0/view?usp=sharing
lineage-14.1-20170613
link: https://drive.google.com/open?id=0B4kfGU1z_PClSlBJd0djcWFHcDQ
Resurrection Remix M
Resurrection Remix M
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
LineageOS 13.0 (rebranded and updated CyanogenMod 13 )
Bugs: Same as CM13 and RR
Installation: Same as CM13 and RR
Link: https://drive.google.com/file/d/0B4kfGU1z_PClWDlobDhlSmZCbzA/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
thanks to:
@xenius9
RESURRECTION REMIX team
CyanogedMod
G2/G3 developers

Good, I am waiting for nuogat.

If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?

yplim2300 said:
If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?
Click to expand...
Click to collapse
No need, it has root

So nice?
I will flash it later.

Finished test on d838.
Done, its work very well! Vietnamese 99%, but isn't problem.
Best rom for me. But it play not good with stock rom. I play Mobius Final Fantasy with medium graphic and frame, some time it freeze 0,01s ^.^. Stock rom no problem. Can you fix it?

Hi, I am running this Rom now. So far so good no issue yet.
I found G Pro2 little slow though perhaps the storage or ram management.

which gapp should i should for this rom?i always get "unfortunately, google play has stopped"

g2mantap said:
which gapp should i should for this rom?i always get "unfortunately, google play has stopped"
Click to expand...
Click to collapse
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929

coavasic said:
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929
Click to expand...
Click to collapse
You flash this with Recovery?
We should choose ARM or ARM64 to download?

Yes, arm
Sent from my LG-D838 using Tapatalk

UPDATE: Let it go for a couple of hours and it seems fine OMG.
UPDATE 2: The second boot up takes a really long time too. I'm still waiting for it to boot up.
UPDATE 3: IT BOOTED UP! But it took seriously long. Tested Soft Reboot seems quick, now testing full reboot.
UPDATE 4: Seems like I should never do a full reboot or shut down on this. Holy **** it's long.
Not having a great time flashing this... Using TWRP 3.0.2-0 to flash the ROM somehow it doesn't go past starting apps. Doesn't seem to boot on CM13 as well.
I've tried:
- Full wipe (system, cache, dalvik, data) and normal wipe (cache, dalvik, data)
- Installing the ROM with and without GAPPS
- Installing LP Baseband & Kernel (found in CM13 thread) with ROM with and without GAPPS
ROM would refer to either RR and CM13.
No SD card inserted, tried having SIM card in or out, the only thing I have not tried is to put the camera back in (stock ROM works without camera).

how to install.. just flash baseband and rom and gapps? thats it? ty

pato2015 said:
how to install.. just flash baseband and rom and gapps? thats it? ty
Click to expand...
Click to collapse
Installation is same as CM13, if you are on lollipop/cm rom you don't need to flash baseband, just rom and gapps, if you are on kitkat flash lollipop baseband in cm13 thread.

@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.

DJCrapsody said:
@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.
Click to expand...
Click to collapse
about 1 min. It's just on this rom or same with cm13?

coavasic said:
about 1 min. It's just on this rom or same with cm13?
Click to expand...
Click to collapse
It's the same with CM13. Doesn't happen on stock or modded stock ROM though.
It's a LG D838 32GB Variant.
Update: Seems like the camera does not work after hooking it back up (it works when I'm on Stock ROM), could it be because the system has already registered it as a non-camera device as I did flash it without the camera hooked up. But I did also flash the Stock ROM without the camera and hooking the camera back on still allowed it to work... Hmm....
Update 2: Device feels sluggish compared to when on the stock ROM, when lucky, app just lags for a second, when unlucky, it hangs for a few minutes then crashes.

@coavasic it's definitely a CM thing, I just reflashed a modified stock ROM (Sphinx Pro v5a) and it booted up in seconds.

coavasic said:
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
I will create this rom based on CM14.1 (nougat) when we have all basic functions working on Cm14.1
thanks to:
@xenius9
RESURRECTION REMIX M team
CyanogedMod
G2/G3 developers
Click to expand...
Click to collapse
just as suggestion....stock camera for this rom is not really good perfomance becoz the image not so bright......i already try installing lenovo super camera version 3.6.7 and it give much better result...hope u can replace the stock camera app

Working Perfectly On LG G Pro 2 F350S, Thanks For Beautiful ROM

[Flashfire BUG] Upgrading my 6P to Android 8.1.0 OTA

Thank you for your contributions so that I can upgrade my Nexus 6P through OTA without losing my custom recovery and root. But I encountered a problem upgrading to 8.1.0. Flashfire just crashes when I choose install OTA.
The cat log says index out of bound in the method of UpdateXMLReader.isReady, line 91.
Please help me out. Thanks!

Easiest way I can suggest would be flash SuperXe with aroma installer in twrp. Its 100% stock with some optional features.

Flashfire is incompatible with latest magisk versions. Copy custom kernel und magisk to your phone. Download factory Image and fastboot flash: bootloader, radio, vendor, boot and system. Then boot into twrp and flash magisk and kernel. Reboot to system and you are done.
https://developer.android.com/studio/releases/platform-tools.html
https://developers.google.com/android/images#angler
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
https://forum.xda-developers.com/nexus-6p/orig-development/kernel-elementalx-n6p-t3240571

[FAQ][Discussion]LineageOS 15.1 by abhishek987 [ask your questions HERE]

Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1:
!NEW AND THE ONLY RECOMMENDED METHOD!​
You must be on Oreo. Before flashing delete all your saved fingerprints and screen locks.
1. Reboot to bootloader (Bootloader must be unlocked)
2. fastboot boot recovery-xx.img (in ADB)
-> Grab official recovery from here: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
3. Wipe System/Data/Cache/Dalvik
4. Flash Lineage & TWRP Installer zip
-> Grab TWRP installer from the link above
5. Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
6. Flash Gapps/MicroG (opengapps.org -> platform ARM64 -> Android 8.1 + Variant [IMO pico is your best pick])
7. Flash Magisk [latest] if you want ROOT (I bet you want!)
-> Grab Magisk from here: http://tiny.cc/latestmagisk
8. Reboot to System
How to update from previous build:
If you don't have permament TWRP, just follow the method above.
If you have permament TWRP:
Delete all your previous fingerprints (just for safety)
Boot to TWRP
Wipe Data/Cache/Dalvik (wiping is optional - but clean flash is always encouraged)
Flash Lineage ROM zip file
Flash Magisk
Flash Gapps/MicroG
Reboot
KNOWN BUGS:​* No bugs right now! Enjoy bug-free rom!
If you have signal stability issues, try this:
Dial *#*#4636#*#*
Go to Phone information
Set Preferred Network Type from Unknown to LTE or WCDMA only
WHAT IS WORKING:​* Everything else
LINEAGE BUILD CHANGELOG:
Code:
[FONT="Arial"]
[B]Most recent build (24.03.2018):[/B]
Fixed portrait mode
Enabled hal3 camera by default
Added doze
Lineage upstream
[B](22.03.2018): [/B]
Fixed double tap to wake (should only work for focaltech panel)
Rebased kernel to latest oreo source drop
Enabled cpusets
Lineage upstreams
[B](13.03.2018): [/B]
Fixed verity issue (builds now can be flashed without magisk)
Fixed Live Display
Fixed Substratum
Fixed ril issues
Lineage Upstream changes
[B](08.03.2018): [/B]
Fixed notification light (should work in call cases now)
Fixed slow charging
Fixed deep sleep issue
Added navbar toggle
Fixed goodix fingerprint issue (should work for all and all 5 fingerprint should be registered now)
Lineage Upstream changes
[B](06.03.2018): [/B]
Fixed led light
Added fingerprint gestures
Fixed Bluetooth name
Fixed battery capacity
Lineage upstream changes[/FONT]
Have fun with LOS!

Q&A
What does NIGHTLY mean?
Nightlies are automatical builds (every few days), so it mean you will have frequent updates, recent Lineage changes will be present in a rom. Also fixes and new stuff will come faster!
How I can go back to stock?
Grab Mi A1 tool from here: https://forum.xda-developers.com/mi-a1/how-to/tool-xiaomi-mi-a1-tool-drivers-unlock-t3742857.
Install it in your PC, enable USB Debugging on your phone, plug phone to PC
Click Flash Stock ROM button
Click Download ROM and wait
Click FlashAll. Your phone will reboot to fastboot and it will start to flash stock
[You will loose all your data, so backup is encouraged]
Do I need to downgrade to Nougat before flashing?
Not anymore It's advised to flash from Oreo
After update my FP don't work, wat to do?!
Make a clean flash using method from OP. If clean flash won't help, try: https://forum.xda-developers.com/mi-a1/development/xiaomi-mi-a1-tissot-firmware-flashable-t3759886
Is Dolby working on Lineage 15.1? How to install it?
Just download Magisk module and enjoy!
My mobile signal is unstable. Is there a way to fix it?
Yes, see a workaround from OP
Why Selinux is permissive, not enforcing?
In unofficial builds Selinux is permissive. If the build goes official, it will have Selinux set to enforcing. Don't worry, just wait for official version!
Is this rom stable enough to be a daily driver?
Depends what you need. Check buglist - if these bugs don't bother you - it can surely be a daily driver
When new build will be avaible?
Don't ask for ETAs. Developers are working hard (in their free time!) to fix a bugs - we just need to wait patiently.

Some users are experiencing wifi issues (myself included). How can i fetch the log?
Steps to reproduce: Turn off bluetooth. wait a moment... wifi will start dropping connection a lot. To fix, just turn on BT again.

Headphones do not work.

Headphones are working!
By the way. I found a bug. The equalizer don't work correct. Everytime when you skip a song you must tap the bass regulator again in the equalizer app. When you don't do it, it plays without bass.

konradit said:
Headphones do not work.
Click to expand...
Click to collapse
Everything fine here, try to reflash

Installed and used for 24 hrs with no apparent problems. No fingerprint bug.
All the other bugs reported in OP exists.
Returned to Stock since I found it a bit smoother.
I will wait for a more stable official build
Good work so far

still

rasputine said:
still
Click to expand...
Click to collapse
Are you using the deadman twrp? I got that using other TWRP versions.

goofball2k said:
Are you using the deadman twrp? I got that using other TWRP versions.
Click to expand...
Click to collapse
Yes I'm using deadman's twrp

rasputine said:
Yes I'm using deadman's twrp
Click to expand...
Click to collapse
Did you reboot after doing the data wipe?

Can I install LOS 15.1 without flashing magisk? I have tried this and had bootloop before any lineageos bootlogo

radogost said:
Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1: ​There's a few working methods. First, most popular one:
....
Third, last one:
Boot to the recovery (same recovery as method above)
Wipe system and cache ( data is optional if your are on Oreo)
Check which partition you are on (A or on partiton B)
Flash the rom on one of the partitions
Flash the twrp installer zip
link: http://www.mediafire.com/file/338o7cl72z52rzz/twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester.zip
Reboot back to the recovery
Switch to the second partition
Flash GAPPS/MicroG and Magisk
Reboot
Click to expand...
Click to collapse
Sorry to pick this up again but the last method implies that TWRP will be installed permanently as default recovery, right? I was successfull only with the first method however I always end up in LOS recovery when try to enter recovery with Vol-up+Power after everything is installed.
I'm sure we all agree that this whole recovery mess needs to be sorted out quickly. Even experienced users are hitting snags and flood the board with questions .

goofball2k said:
Did you reboot after doing the data wipe?
Click to expand...
Click to collapse
Yes sir

i face the same issue with any methond i am using.
in some cases i am unable to install all the zips and in another case i am unable to install only magisk(error 1)
i followed exactly the steps.
any suggestions?

I'm not sure why the issues. I followed the steps in the OP, except I didn't flash TWRP, I just boot to it temporarily.
I did the following:
Flashed 7.11.18 ROM using MiFlash.
Booted into the ROM, set it up minimally.
Rebooted to fastboot, unlocked bootloader
booted temporarily to deadman TWRP, wiped system/cache/dalvik/data (just to be sure it is completely clean)
rebooted and then booted back into deadman TWRP
flashed LOS.
rebooted and then booted back into deadman TWRP
Flashed gapps and magisk.
rebooted to OS.

hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!

Flashed from 8.1.10 without any problems...

ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
---------- Post added at 01:47 PM ---------- Previous post was at 01:47 PM ----------
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?

t0per666 said:
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Click to expand...
Click to collapse
Tornado95 said:
Flashed from 8.1.10 without any problems...
Click to expand...
Click to collapse
Hmm so which one is telling the truth? ??
Sent from my Xiaomi Mi A1 using XDA Labs

Magisk hell resolved??!!!!!!!??!!!!!!!!!!?? fix/work around

im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR

Development OP9-LEMONADE-A13-ROM-WATCHDOGS-JUNE 25, 2023

I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE!!!
YOU HAVE BEEN WARNED!!!
Watch dogs is a ROM I created and it started with the OnePlus 9 Pro back in December. I have decided to bring it to the OnePlus 9, it's based on LineageOS & crDroid source & dependencies and I thank them for its use. SafetyNet and CTS passes whether your rooted or not. Modules not required. Most features are the same as crDroid but I have made some adjustments to bluetooth quality and some fonts that are not available there, plus Gapps are included.
Before you begin, if you don't have the latest platform tools installed on your windows machine. Download it here:
DO NOT FLASH GAPPS!!!! THEY ARE INCLUDED IN BUILD!!!!!
Flashing Instructions
First time installation (clean flash):
This update requires OOS 13.1 - 13.1.0.500(EX01) firmware
Backup your data
Download the ROM, and firmware flasher listed further down on this post and place all in your platform tools folder,
Extract all the contents in platform tools, Firmware flasher in folder.
You must flash firmware in bootloader.
Boot to recovery and factory reset then adb sideload
adb sideload WatchDogs-13.0-20230625-lemonade.zip
Reboot to system
reboot to recovery if you want root
adb sideload magisk.apk or adb sideload magisk.zip
Reboot to system
Update installation:
Updates can be sideloaded with custom recovery. Updates do not appear in system updater.
Sources:
ROM
Kernel
Downloads:
ROM
FIRMWARE FLASHER
Bugs?
Let me know.

Initial builds
WatchDogs-WITHGAPPS-13.0-20230312-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230312-lemonade.zip
If you require Google apps, flash the first one only!
If you do not want Google apps, flash the second one only!
You can't cross dirty flash a update which should be common sense. Example, you can't dirty flash the with gapps build then next update, dirty flash the no gapps one.

I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!

Telegram group please

lorilucille9 said:
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Click to expand...
Click to collapse
That's weird. Did you try sideloading the firmware flasher first before the ROM? If you still have difficulties, I will post the dtbo, boot and vendor_boot files for you to flash to make it compatible. I don't have this phone. I have the OnePlus9 Pro so I can't test it. I'm sure it works or there would be other users saying the same thing.

I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with

lorilucille9 said:
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
Click to expand...
Click to collapse
Good deal, and no problem. Since I use crDroid sources, I figured that should work. I will still post the files necessary to flash recovery when I get a chance. Let me know if there are any bugs or issues with the ROM itself so I can work on it. Thank you!

I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.

incesu571 said:
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
Click to expand...
Click to collapse
Bootanimation, fonts, bluetooth, sound audio and other tweaks.

TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
thx bro

TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.

lorilucille9 said:
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
Click to expand...
Click to collapse
correct, sorry, forgot to mention that as well. Thank you!! crDroid doesn't offer a with gapps build. You can use the no gapps build to flash your own gapps but I won't support force close issues with the ROM. Example, pixel setup wizard can't be used because it interfers with the default launcher. And yes, on updates, just sideload the with gapps build and your done, unless you want root, then you will have to reboot and sideload magisk because root will be gone on a update.

incesu571 said:
Telegram group please
Click to expand...
Click to collapse
There is one in my 9 pro thread. I will update when I can.

I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?

Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
Convert your T-Mobile to EU as listed on another thread, then you can use the EU firmware. I will be posting a update soon with the boot, vendor_boot and dtbo. If you don't want to do that, I will post them later to flash recovery on your phone. Keep in mind that different variants act different, so you may have bugs on T-Mobile, it wasn't tested.

screenshots?

pubmastervnt said:
screenshots?
Click to expand...
Click to collapse
Not by me, maybe someone else who is running it

MARCH UPDATES: 03/24:
WatchDogs-WITHGAPPS-13.0-20230324-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230324-lemonade.zip

Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
You can use my custom recovery, files added in OP. You still need latest stock A13.
fastboot flash --slot all boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img

You cant install this (or any rom but base 11) on tmobile 2117 without BL unlock key. Pretty sure its not possible.
You can only convert to base global 11\OOS11 on 2117 for root, then in ui updater doesnt work OTA or manually. You can get to 13 stock only, because you need to be stock to ota, where you need a key to unlock bootloader again (conversion would bring you back to 11).
*The rooting situation with this phone sucks. I think Jaguar is the only one that will work because it is base 11.