Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1:
!NEW AND THE ONLY RECOMMENDED METHOD!
You must be on Oreo. Before flashing delete all your saved fingerprints and screen locks.
1. Reboot to bootloader (Bootloader must be unlocked)
2. fastboot boot recovery-xx.img (in ADB)
-> Grab official recovery from here: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
3. Wipe System/Data/Cache/Dalvik
4. Flash Lineage & TWRP Installer zip
-> Grab TWRP installer from the link above
5. Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
6. Flash Gapps/MicroG (opengapps.org -> platform ARM64 -> Android 8.1 + Variant [IMO pico is your best pick])
7. Flash Magisk [latest] if you want ROOT (I bet you want!)
-> Grab Magisk from here: http://tiny.cc/latestmagisk
8. Reboot to System
How to update from previous build:
If you don't have permament TWRP, just follow the method above.
If you have permament TWRP:
Delete all your previous fingerprints (just for safety)
Boot to TWRP
Wipe Data/Cache/Dalvik (wiping is optional - but clean flash is always encouraged)
Flash Lineage ROM zip file
Flash Magisk
Flash Gapps/MicroG
Reboot
KNOWN BUGS:* No bugs right now! Enjoy bug-free rom!
If you have signal stability issues, try this:
Dial *#*#4636#*#*
Go to Phone information
Set Preferred Network Type from Unknown to LTE or WCDMA only
WHAT IS WORKING:* Everything else
LINEAGE BUILD CHANGELOG:
Code:
[FONT="Arial"]
[B]Most recent build (24.03.2018):[/B]
Fixed portrait mode
Enabled hal3 camera by default
Added doze
Lineage upstream
[B](22.03.2018): [/B]
Fixed double tap to wake (should only work for focaltech panel)
Rebased kernel to latest oreo source drop
Enabled cpusets
Lineage upstreams
[B](13.03.2018): [/B]
Fixed verity issue (builds now can be flashed without magisk)
Fixed Live Display
Fixed Substratum
Fixed ril issues
Lineage Upstream changes
[B](08.03.2018): [/B]
Fixed notification light (should work in call cases now)
Fixed slow charging
Fixed deep sleep issue
Added navbar toggle
Fixed goodix fingerprint issue (should work for all and all 5 fingerprint should be registered now)
Lineage Upstream changes
[B](06.03.2018): [/B]
Fixed led light
Added fingerprint gestures
Fixed Bluetooth name
Fixed battery capacity
Lineage upstream changes[/FONT]
Have fun with LOS!
Q&A
What does NIGHTLY mean?
Nightlies are automatical builds (every few days), so it mean you will have frequent updates, recent Lineage changes will be present in a rom. Also fixes and new stuff will come faster!
How I can go back to stock?
Grab Mi A1 tool from here: https://forum.xda-developers.com/mi-a1/how-to/tool-xiaomi-mi-a1-tool-drivers-unlock-t3742857.
Install it in your PC, enable USB Debugging on your phone, plug phone to PC
Click Flash Stock ROM button
Click Download ROM and wait
Click FlashAll. Your phone will reboot to fastboot and it will start to flash stock
[You will loose all your data, so backup is encouraged]
Do I need to downgrade to Nougat before flashing?
Not anymore It's advised to flash from Oreo
After update my FP don't work, wat to do?!
Make a clean flash using method from OP. If clean flash won't help, try: https://forum.xda-developers.com/mi-a1/development/xiaomi-mi-a1-tissot-firmware-flashable-t3759886
Is Dolby working on Lineage 15.1? How to install it?
Just download Magisk module and enjoy!
My mobile signal is unstable. Is there a way to fix it?
Yes, see a workaround from OP
Why Selinux is permissive, not enforcing?
In unofficial builds Selinux is permissive. If the build goes official, it will have Selinux set to enforcing. Don't worry, just wait for official version!
Is this rom stable enough to be a daily driver?
Depends what you need. Check buglist - if these bugs don't bother you - it can surely be a daily driver
When new build will be avaible?
Don't ask for ETAs. Developers are working hard (in their free time!) to fix a bugs - we just need to wait patiently.
Some users are experiencing wifi issues (myself included). How can i fetch the log?
Steps to reproduce: Turn off bluetooth. wait a moment... wifi will start dropping connection a lot. To fix, just turn on BT again.
Headphones do not work.
Headphones are working!
By the way. I found a bug. The equalizer don't work correct. Everytime when you skip a song you must tap the bass regulator again in the equalizer app. When you don't do it, it plays without bass.
konradit said:
Headphones do not work.
Click to expand...
Click to collapse
Everything fine here, try to reflash
Installed and used for 24 hrs with no apparent problems. No fingerprint bug.
All the other bugs reported in OP exists.
Returned to Stock since I found it a bit smoother.
I will wait for a more stable official build
Good work so far
still
rasputine said:
still
Click to expand...
Click to collapse
Are you using the deadman twrp? I got that using other TWRP versions.
goofball2k said:
Are you using the deadman twrp? I got that using other TWRP versions.
Click to expand...
Click to collapse
Yes I'm using deadman's twrp
rasputine said:
Yes I'm using deadman's twrp
Click to expand...
Click to collapse
Did you reboot after doing the data wipe?
Can I install LOS 15.1 without flashing magisk? I have tried this and had bootloop before any lineageos bootlogo
radogost said:
Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1: There's a few working methods. First, most popular one:
....
Third, last one:
Boot to the recovery (same recovery as method above)
Wipe system and cache ( data is optional if your are on Oreo)
Check which partition you are on (A or on partiton B)
Flash the rom on one of the partitions
Flash the twrp installer zip
link: http://www.mediafire.com/file/338o7cl72z52rzz/twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester.zip
Reboot back to the recovery
Switch to the second partition
Flash GAPPS/MicroG and Magisk
Reboot
Click to expand...
Click to collapse
Sorry to pick this up again but the last method implies that TWRP will be installed permanently as default recovery, right? I was successfull only with the first method however I always end up in LOS recovery when try to enter recovery with Vol-up+Power after everything is installed.
I'm sure we all agree that this whole recovery mess needs to be sorted out quickly. Even experienced users are hitting snags and flood the board with questions .
goofball2k said:
Did you reboot after doing the data wipe?
Click to expand...
Click to collapse
Yes sir
i face the same issue with any methond i am using.
in some cases i am unable to install all the zips and in another case i am unable to install only magisk(error 1)
i followed exactly the steps.
any suggestions?
I'm not sure why the issues. I followed the steps in the OP, except I didn't flash TWRP, I just boot to it temporarily.
I did the following:
Flashed 7.11.18 ROM using MiFlash.
Booted into the ROM, set it up minimally.
Rebooted to fastboot, unlocked bootloader
booted temporarily to deadman TWRP, wiped system/cache/dalvik/data (just to be sure it is completely clean)
rebooted and then booted back into deadman TWRP
flashed LOS.
rebooted and then booted back into deadman TWRP
Flashed gapps and magisk.
rebooted to OS.
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Flashed from 8.1.10 without any problems...
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
---------- Post added at 01:47 PM ---------- Previous post was at 01:47 PM ----------
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
t0per666 said:
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Click to expand...
Click to collapse
Tornado95 said:
Flashed from 8.1.10 without any problems...
Click to expand...
Click to collapse
Hmm so which one is telling the truth? ??
Sent from my Xiaomi Mi A1 using XDA Labs
Related
Disclaimer:
/* **Your warranty is now void.** * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. * */
Resurrection Remix N
This rom is for D838 variant, maybe works on others, but I have not tested.
Working:
-Wifi
-Ril
-Camera (rear, front, video)
-Sound
-SDCard
-DT2W (Double tap to wake)
-Bluetooth
-NFC
Bugs:
-Tell me
LineageOS 14.1
Working:
-same as RR N
Bugs:
-same as RR N
Installation:
-same as RR N
Downloads:
Latest builds:
Mokee June Update:
-June security patch level
-Kernel and device tree updates
link : https://drive.google.com/open?id=1etfqN8e1C5VxvBdtyJmuSuDkIxRTg2vh
Mokee May Update:
-May security patch level
-Kernel and device tree updates
-Enabled zRam
link : https://drive.google.com/open?id=1El4BRvm0ehAMm7TzA1EiiHfRPYGDNGKr
February updates: (MOKEE N, LINEAGEOS 14.1, RR N
Download
Changelog:
-Kernel and device tree updates
-New governors and IO schedulers
-February security patch and ROM updates
(I'm gonna update RR and LineageOS soon)
December update:
https://drive.google.com/open?id=1jHwwNxaMJ91-iTOuSqm0jYRjzSuJO3jK[/SIZE][/B]
Only LineageOS is rooted, for other roms flash magisk.
Changelog:
-Kernel, device tree, rom updates
-December security patch level
Resurrection Remix N
RR-N-v5.8.5 20171010
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiD62G-CtstEulJu0
news: RR updates, kernel updates, October security patch, etc
This is final build of RR based on Nougat
Lineage
lineage-14.1-20171013
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiEArgg1WboOrj7B_
news: LineageOS updates, kernel updates, October security patch
This is final build of LineageOS based on Nougat[/B]
Installation:
You need twrp recovery by @xenius9 : https://forum.xda-developers.com/lg-g-pro-2/development/twrp-recovery-lg-g-pro-2-t3318686
1. MAKE BACKUP!!!
2. Push baseband , ROM and gapps to sdcard (copy cm13 zip and LP Baseband to sd card)
3. Make WIPE dalvik, data,cache(from recovery)(advanced wipe in twrp)
4. Install lollipop baseband
5. Install ROM
6. Install gapps
Additional links:
KK Baseband and kernel - https://yadi.sk/d/nVx3rb7MpheN9
LP Baseband and kernel(bumped)+KK bootloader - https://yadi.sk/d/_hz4jdQhpheNn
How to Restore previous ROM:
1. if you have KK based Rom - flash KK Baseband and restore ROM from Recovery
2. if you have LP based Rom - flash LP Baseband and restore ROM from Recovery
How to install twrp on kitkat:
1. You need ROOT
2. Download and install this apk: https://drive.google.com/file/d/0B4kfGU1z_PCla2pxMW9ZZWgzX3M/view?usp=sharing
3. Download updated TWRP zip and put to internal storage or sdcard: https://drive.google.com/file/d/0B0LH2ajSZjDpalVsQmpoTDBfTUE/view
4. Open installed app, grant root access, flash recovery
5. Reboot into recovery (via apk or power off phone, press power and volume down button until lg logo come up, release buttons for one second than press volume up and volume down, select yes and again yes. This will not erase your memory if you have TWRP flashed)
6. Flash updated TWRP
7. Reboot into recovery again
How to install TWRP on lollipop:
1. Need ROOT
2. Download and install LG drivers from here : https://drive.google.com/file/d/0B4kfGU1z_PClSWVlY0FGWWJoVFE/view?usp=sharing
3. Download and extract this files: https://drive.google.com/file/d/0B4kfGU1z_PClQ3AyM2lKOGR1S3M/view?usp=sharing
4. Enable usb debugging under developer options
5. Connect phone to pc via MTP
6. Run d838recovery.bat (You will see chinese language, just press any button to flash recovery)
7. Allow usb debugging and grant root access
8. DO NOT REMOVE USB CABLE
9. After finishing process press any key to reboot into TWRP recovery
TWRP 3.2.1-0
link: https://drive.google.com/file/d/1ADfHyz8ii6w_QErKkzhrKexTQ4a6cAXp/view?usp=sharing
to update from older twrp just flash zip
Recommended GAPPS (google apps) : http://opengapps.org/
Older builds
RR
link: https://drive.google.com/file/d/0B4kfGU1z_PClbmJUTkdGUnpYYlU/view?usp=sharing
Lineage
link: https://drive.google.com/open?id=0B4kfGU1z_PClbURaNm5ST1FMeVE
lineage-14.1-20170624
link: https://drive.google.com/file/d/0B4kfGU1z_PClRk5XV0pSS0hfMk0/view?usp=sharing
lineage-14.1-20170613
link: https://drive.google.com/open?id=0B4kfGU1z_PClSlBJd0djcWFHcDQ
Resurrection Remix M
Resurrection Remix M
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
LineageOS 13.0 (rebranded and updated CyanogenMod 13 )
Bugs: Same as CM13 and RR
Installation: Same as CM13 and RR
Link: https://drive.google.com/file/d/0B4kfGU1z_PClWDlobDhlSmZCbzA/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
thanks to:
@xenius9
RESURRECTION REMIX team
CyanogedMod
G2/G3 developers
Good, I am waiting for nuogat.
If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?
yplim2300 said:
If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?
Click to expand...
Click to collapse
No need, it has root
So nice?
I will flash it later.
Finished test on d838.
Done, its work very well! Vietnamese 99%, but isn't problem.
Best rom for me. But it play not good with stock rom. I play Mobius Final Fantasy with medium graphic and frame, some time it freeze 0,01s ^.^. Stock rom no problem. Can you fix it?
Hi, I am running this Rom now. So far so good no issue yet.
I found G Pro2 little slow though perhaps the storage or ram management.
which gapp should i should for this rom?i always get "unfortunately, google play has stopped"
g2mantap said:
which gapp should i should for this rom?i always get "unfortunately, google play has stopped"
Click to expand...
Click to collapse
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929
coavasic said:
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929
Click to expand...
Click to collapse
You flash this with Recovery?
We should choose ARM or ARM64 to download?
Yes, arm
Sent from my LG-D838 using Tapatalk
UPDATE: Let it go for a couple of hours and it seems fine OMG.
UPDATE 2: The second boot up takes a really long time too. I'm still waiting for it to boot up.
UPDATE 3: IT BOOTED UP! But it took seriously long. Tested Soft Reboot seems quick, now testing full reboot.
UPDATE 4: Seems like I should never do a full reboot or shut down on this. Holy **** it's long.
Not having a great time flashing this... Using TWRP 3.0.2-0 to flash the ROM somehow it doesn't go past starting apps. Doesn't seem to boot on CM13 as well.
I've tried:
- Full wipe (system, cache, dalvik, data) and normal wipe (cache, dalvik, data)
- Installing the ROM with and without GAPPS
- Installing LP Baseband & Kernel (found in CM13 thread) with ROM with and without GAPPS
ROM would refer to either RR and CM13.
No SD card inserted, tried having SIM card in or out, the only thing I have not tried is to put the camera back in (stock ROM works without camera).
how to install.. just flash baseband and rom and gapps? thats it? ty
pato2015 said:
how to install.. just flash baseband and rom and gapps? thats it? ty
Click to expand...
Click to collapse
Installation is same as CM13, if you are on lollipop/cm rom you don't need to flash baseband, just rom and gapps, if you are on kitkat flash lollipop baseband in cm13 thread.
@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.
DJCrapsody said:
@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.
Click to expand...
Click to collapse
about 1 min. It's just on this rom or same with cm13?
coavasic said:
about 1 min. It's just on this rom or same with cm13?
Click to expand...
Click to collapse
It's the same with CM13. Doesn't happen on stock or modded stock ROM though.
It's a LG D838 32GB Variant.
Update: Seems like the camera does not work after hooking it back up (it works when I'm on Stock ROM), could it be because the system has already registered it as a non-camera device as I did flash it without the camera hooked up. But I did also flash the Stock ROM without the camera and hooking the camera back on still allowed it to work... Hmm....
Update 2: Device feels sluggish compared to when on the stock ROM, when lucky, app just lags for a second, when unlucky, it hangs for a few minutes then crashes.
@coavasic it's definitely a CM thing, I just reflashed a modified stock ROM (Sphinx Pro v5a) and it booted up in seconds.
coavasic said:
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
I will create this rom based on CM14.1 (nougat) when we have all basic functions working on Cm14.1
thanks to:
@xenius9
RESURRECTION REMIX M team
CyanogedMod
G2/G3 developers
Click to expand...
Click to collapse
just as suggestion....stock camera for this rom is not really good perfomance becoz the image not so bright......i already try installing lenovo super camera version 3.6.7 and it give much better result...hope u can replace the stock camera app
Working Perfectly On LG G Pro 2 F350S, Thanks For Beautiful ROM
System / TWRP http://bigota.d.miui.com/8.10.25/miui_HM5Global_8.10.25_fb9965b286_7.1.zip
System / TWRP http://bigota.d.miui.com/8.10.18/miui_HM5Global_8.10.18_140e1adfd8_7.1.zip
System / TWRP http://bigota.d.miui.com/8.10.11/miui_HM5Global_8.10.11_ab0bee100f_7.1.zip
System / TWRP http://bigota.d.miui.com/8.9.20/miui_HM5Global_8.9.20_0024d09257_7.1.zip
System / TWRP http://bigota.d.miui.com/8.9.6/miui_HM5Global_8.9.6_a71a6592ec_7.1.zip
MiFlash / fastboot http://bigota.d.miui.com/8.10.25/ro...25_20181025.0000.00_7.1_global_fa0326d608.tgz
MiFlash / fastboot http://bigota.d.miui.com/8.10.18/ro...18_20181018.0000.00_7.1_global_b2ef650892.tgz
MiFlash / fastboot http://bigota.d.miui.com/8.10.11/ro...11_20181011.0000.00_7.1_global_c0e1d60d2c.tgz
MiFlash / fastboot http://bigota.d.miui.com/8.9.20/rosy_global_images_8.9.20_20180920.0000.00_7.1_global_4eb6e09743.tgz
MiFlash / fastboot http://bigota.d.miui.com/8.9.6/rosy_global_images_8.9.6_20180906.0000.00_7.1_global_46f085c724.tgz
Did anyone flash this already?
Can I flash it with TWRP or I have to revert back to stock recovery?
Yes you can install it via TWRP, I went back because of issues with display after the installation.
I try install it with TWRP and then flash the beacon_kernel_second_bake, no-verity-opt-encrypt, and magisk for root. Everything seems good except the notification, clear button position need some fix from Developer and when you expand notification from chat such as WA it shows nothing. Now I use it as daily rom and its doing the job very well.
Rdeniro67 said:
Yes you can install it via TWRP, I went back because of issues with display after the installation.
Click to expand...
Click to collapse
What issues?
Permanently flickering display after about 6 hours. Phone no longer operable. No more problems after installing Miui 9 Global Stable.
i didn't had any problems with twrp
you have to flash this rom and right and then flash the magisk module to patch boot image in order to boot because stock rom can't boot without patching the stock image .
Miui 10 Global Beta Update 8.7.10
Link: http://bigota.d.miui.com/8.7.10/miui_HM5Global_8.7.10_c096574342_7.1.zip
Flash via twrp.
Clean flash recommend.
After flashing the rom, flash lazy flasher zip then reboot.
8.7.12 added in OP.
8.7.17 (daily) added in OP.
8.7.19 added in OP.
Camerado said:
8.7.19 added in OP.
Click to expand...
Click to collapse
I flashed the 19th July build using MiFlash onto my wife's Redmi 5. We've discovered two issues with it.
The first is that there's severe battery drain. The operating system is draining the battery at a rapid rate. I've restarted it to see if this resolves it.
The other issue issue is that she wants the weather displayed in the quick settings like in MIUI 9. Is there a way of doing this?
8.7.26 added in OP.
Hey OP can u move this thread to the ROMs section!!?
This ain't the section for ROMs..
is it possible if I z.b. the 8.7.19 installed the 8.7.26 as update to install
8.8.2 added in OP.
8.8.9 added in OP.
I have now installed the 8.8.2
would like to update to 8.8.9
Is this possible without rebuilding the whole system
I tried it only system deleted and new version installed worked wonderfully.
8.8.16 added in OP.
Lineage 17.1
Custom ROM for the LG G7 ThinQ
WARNING: Discontinued
No more Updates from me
This is Lineage 17.1 (Android 10) ROM designed for the LG G7 ThinQ. It was designed with the help of @thenotonly and @SGCMarkus and without them this would not have been possible. Thank you guys for all your help!
Supported models:
Anything that can go into Fastboot
(exept T-Mobile model G710TM and Korean users will have a hard time following the guide)
Warning: You need to have Android 9.0 Stock pre-installed.
Warranty Void:
I am not responsible if you are late for work, missed an important call, got yourself stuck under a rock or break your TV with a wii remote. That also includes turtles. Make sure everything important is working for you before you decide to use this ROM as a daily driver.
Click to expand...
Click to collapse
What is working:
Auto-brightness
Camera
Calls
DAC Controls
FM Radio
NFC
Bluetooth
WiFi
SDCard
Always on Display
Vibration
Most stuff i haven't mentioned
What are the Bugs:
Hotspot Fixed
Bluetooth Audio (Workaround)
USB Hotspot
The ones that are still hidden
Click to expand...
Click to collapse
Download link:
There are 2 Versions. One with Google apps (Gapps) pre-installed and one without Google apps (Gapp-less) witch is for people who dont like Gapps and want an alternative like Nanodroid (Not included).
Google Drive Folder for the LIneage 17.1
Click to expand...
Click to collapse
Installation:
Step 1: TWRP
Backup any data you have (including music, photos, etc)!
- You cannot do that in TWRP!
FIrst you need to boot TWRP. You can refer to the Guide right here
TWRP Guide for the LG G7 ThinQ < -- Link
Once you meet all the requirements boot into TWRP and proceed to step 2
Step 2: Installing
In TWRP go to Wipe -> Format Data. ( This will wipe absolutely everything on the phone.)
Connect your phone to your PC.
Download Lineage 17.1 Installation zip file from Google Drive and copy it to your phone
In TWRP go to Install -> Find your zip file -> Install it
Once done reboot the phone
Done
Step 3. Install Magisk (Optional)
Make soure you have successfully booted into LineageOS
Reboot to bootloader
Boot into TWRP using "fastboot boot"
Download Magisk zip file from the official Magisk XDA thread (Google it) to your phone
Install Magisk zip
Reboot to system
Done.
Click to expand...
Click to collapse
Congratulations! Now You have LineageOS installed on your device! WooHoo! :victory:
Sources:
https://github.com/LameMonster82/android_device_lge_judyln
https://github.com/LameMonster82/android_device_lge_sdm845-common
https://github.com/LameMonster82/proprietary_vendor_lge
https://github.com/TheNotOnly/android_kernel_lge_sdm845 (Kernel by @NotTheOnly)
XDA:DevDB Information
LineageOS 17.1, ROM for the LG G7 ThinQ
Contributors
LameMonster82, @thenotonly,@SGCMarkus
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 9.0 pre-installed + TWRP guide
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 202200218
Stable Release Date: 2020-02-18
Created 2020-02-19
Last Updated 2020-04-17
Reserved
Changelog 2020-04-18
- Updated Gapps
- Fixed Bluetooth bug
- Updated Security patch
- Switch Kernel
- Added OTA Updates support (20200401 and up versions)
- Some other changes I forgot about
Changelog: 2020-03-02
- Updated Gapps
- Fixed Hotspot
- Fixed some issues with the LED
Changelog: 2020-02-18
- Initial commit
Is there a working AOD?
FluffyDiscord said:
Is there a working AOD?
Click to expand...
Click to collapse
Yes there is
Does GCam works? 6.2 version
This being unofficial, how do we get updates and how are they installed?
does vibration works?
It does not start, it starts defront the rom stock, as if nothing had been installed.
Modelo LG G7 Thinq G710EM
HimikoMw said:
It does not start, it starts defront the rom stock, as if nothing had been installed.
Modelo LG G7 Thinq G710EM
Click to expand...
Click to collapse
I answer myself, it is necessary to have android 9, but of the European version
Stvn77 said:
does vibration works?
Click to expand...
Click to collapse
It's not in the "not working" list so it works.
Does the aod work the same as the official system?Use a second backlight?
Hi guys i got the G710N korean version. how can i root and install this rom? do i've to convert to another firmware?
First Thank You for such great ROM!
I think for now there is no way to root this ROM on korean version. I tried to Install this Rom, next I changed with LGUP only boot_a using partition.dl for flash boot from ULM 11g ROM to unlock fastboot, flashed twrp (after this step I was able to boot stock ROM from slot a) and installed magisk from TWRP to boot_b which is used by LineageOS (select slot b in TWRP) after magisk install bootloop. Tried also flash only boot_b with ULM 11g boot same result.
I think there is problem with booting this with any other boot installed.
Aseiel said:
First Thank You for such great ROM!
I think for now there is no way to root this ROM on korean version. I tried to Install this Rom, next I changed with LGUP only boot_a using partition.dl for flash boot from ULM 11g ROM to unlock fastboot, flashed twrp (after this step I was able to boot stock ROM from slot a) and installed magisk from TWRP to boot_b which is used by LineageOS (select slot b in TWRP) after magisk install bootloop. Tried also flash only boot_b with ULM 11g boot same result.
I think there is problem with booting this with any other boot installed.
Click to expand...
Click to collapse
You can't keep twrp with lineage you have to Fastboot boot Twrp image and flash magisk zip
SELinux permissive? enforcing?
mr3p said:
SELinux permissive? enforcing?
Click to expand...
Click to collapse
Permissive
they know which version of Gcam works in this rom (lineage os 17.1)??
Thank you very much. It's great to see some progress on this phone. Works on G710EAW.
HimikoMw said:
they know which version of Gcam works in this rom (lineage os 17.1)??
Click to expand...
Click to collapse
These are the ones that are working for me...
LGN2_MGC_6.1.021_MI8_V1d
LGW2_MGC_6.1.021_MI8_V1d
theParanoid04 said:
These are the ones that are working for me...
LGN2_MGC_6.1.021_MI8_V1d
LGW2_MGC_6.1.021_MI8_V1d
Click to expand...
Click to collapse
Thank you, you know why the photo is not saved when the HDR is activated, it stays in processing HDR +, in the LGW2_MGC_6.1.021_MI8_V1d.
Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.
module?
spindlygaming said:
module?
Click to expand...
Click to collapse
I dont use any module except systemless host. Module is not affects my solution.
Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!
thithi1983 said:
I dont use any module except systemless host. Module is not affects my solution.
Click to expand...
Click to collapse
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
thithi1983 said:
Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!
Click to expand...
Click to collapse
why not flash firmware 8.10.25
than flash rom
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
r9 is very old
spindlygaming said:
r9 is very old
Click to expand...
Click to collapse
I don't see how this is a problem if everything works perfectly fine.
spindlygaming said:
module?
Click to expand...
Click to collapse
mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
Have you play PUBGm on poco f1? I try many kernel including arter97 r9 and twisted prime 9.1.24 touch driver. Delay touch still happen when i play with 4 fingers claw. Only solution i wrote solved the problem.
spindlygaming said:
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
why not flash firmware 8.10.25
than flash rom
Click to expand...
Click to collapse
I want to flash only vendor but i dont know how to convert vendor.new.dat.br to vendor.img
Flash rom then backup vendor IMG in twrp
JV Spartacus said:
Flash rom then backup vendor IMG in twrp
Click to expand...
Click to collapse
Thanks! You open my mind!
thithi1983 said:
Thanks! You open my mind!
Click to expand...
Click to collapse
Will you share it here so that noobs like me can get it easily.
zip file error problem
thithi1983 said:
Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.
Click to expand...
Click to collapse
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee
mahdih78 said:
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee
Click to expand...
Click to collapse
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.
how???
thithi1983 said:
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.
Click to expand...
Click to collapse
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee
mahdih78 said:
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee
Click to expand...
Click to collapse
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127
thithi1983 said:
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127
Click to expand...
Click to collapse
Arter97 has made it paid I can't download it from this thread
how to install it and made it paid
ThePrathamesh said:
Arter97 has made it paid I can't download it from this thread
Click to expand...
Click to collapse
yeah he is right
i dont know how to install it without zip file
help please man
is your pubg mobile working good know or still have touch delay with this kernel ???
arter kernel download link.
t.me/s/PocoRomNews/2565?q=%23arter
I'm not responsible for any damage to your device of any sort.
By flashing this, you take responsibility of anything that happens.
Process at your own risk!
If you want to check - please make backup. Better to store all partitions.
What works
audio
bluetooth
brightness
call/LTE (mondrianlte)
camera
DRM
OTA
video
wifi
wifi display
What doesn't work
Back camera preview : wrong rotation on preview in default app Fixed build 20221204
SELinux Fixed build 20221130
Instructions:
0. Patched TWRP for FOTA : mondrianwifi / mondrianlte
1. Factory reset if coming from another ROM.
2. Install ROM
3. Install GApps (optionally) [Recommended BiTGApps ARM 13]
4. Install Magisk 25.2 (optionally)
Sources & Changes:
Device tree mondrianwifi
Device tree mondrianlte
Kernel tree
Vendor tree mondrianwifi
Vendor tree mondrianlte
TWRP tree mondrianwifi
TWRP tree mondrianlte
Download:
Downloads: mondrianwifi / mondrianlte
Note to users: I'm not responsible if you brick your tablet. See the disclaimer above.
Contributors
LineageOS team for source code.
@retiredtab for helping make mondrianwifi to work on Android12
@khalvat for its work on porting msm8974 to Android12 (https://github.com/LineageOS-UL)
@pocketrule, @bierma32, @Yxo 6o6uka for willing to test WIFI builds and leaving feedback
@bmwdroid for willing to test LTE builds and leaving feedback
ROM OS Version: 13.0
Version Information
Status: Nightlies
Created 2022-11-27
Last Updated 2023-01-05
THX @phoval for the New LOS 20 Version.
Installed this as update over the Version 20221010 without issue's.
FOTA update notification works .
New build: SeLinux is enforcing
Perfect !!!
Amazing !!
Thank you @phoval !!!
Hello, good job.
Thank you @phoval
Installed and runs smooth. Sound, video & wifi works. Excelled work.
Amazing, the previous versions made my tablet very slow, but this one seems to run well. Great job! Thanks to the developers
@phoval since I've installed the zram_ boot.IMG runs the ROM with out lags and crash's.
Thanks again for your work.
I will update today to the last Version 20221204
cwokel said:
Amazing, the previous versions made my tablet very slow, but this one seems to run well. Great job! Thanks to the developers
Click to expand...
Click to collapse
bierma32 said:
@phoval since I've installed the zram_ boot.IMG runs the ROM with out lags and crash's.
Thanks again for your work.
I will update today to the last Version 20221204
Click to expand...
Click to collapse
my tabelt is still slow, even with this built. i did a factory reset. even my battery is draining extremely.
@bierma32 what is zram_ boot.IMG. can you provide me that file? can i flash it in twrp?
greetz
@chkdsk90
Charge your battery to 100% and try another clean install, format also system and data .
chkdsk90 said:
my tabelt is still slow, even with this built. i did a factory reset. even my battery is draining extremely.
@bierma32 what is zram_ boot.IMG. can you provide me that file? can i flash it in twrp?
greetz
Click to expand...
Click to collapse
Provide logcat.
zram boot img was alpha kernel for test.
The changes are includes since 2nd december build.
how can i flash the patched TWRP? Odin doesn't recognize the twrp file because its a .img file and not .tar
chkdsk90 said:
how can i flash the patched TWRP? Odin doesn't recognize the twrp file because its a .img file and not .tar
Click to expand...
Click to collapse
You can download an official tar file, flash it in odin, reboot to recovery and from there you can update twrp.
pocketrule said:
You can download an official tar file, flash it in odin, reboot to recovery and from there you can update twrp.
Click to expand...
Click to collapse
And why is the link to a patched twrp? What exactly is patched? What is fota?
Sorry for the questions. I only know the Normal twrp. tar file
chkdsk90 said:
And why is the link to a patched twrp? What exactly is patched? What is fota?
Sorry for the questions. I only know the Normal twrp. tar file
Click to expand...
Click to collapse
It's patched for FOTA. A simple internet search reveals, that fota stands for "Firmware Over-the-Air" 😉️ I.e. you can download and update the rom directly from the rom itself. If you (always) download and flash the rom manually / separately, you don't need the patched rom.
One detail: the taskbar at the bottom does not disappear when I open an app, neither the three virtual bottons. Tried all configuration without result. Any hints?
If I get a app not responding message and I hit wait it will repeatedly pop up despite the app responding again (dirty flash). Otherwise first impressions of this rom are good.
Just asking, any plans or chances for mondrianlte to get an A13 build? I've got that device running an unofficial LOS A11 build (the latest OS available for it), and it still has official TWRP support as of today
cwokel said:
One detail: the taskbar at the bottom does not disappear when I open an app, neither the three virtual bottons. Tried all configuration without result. Any hints?
Click to expand...
Click to collapse
Just disable it in system > buttons. It's customization during first setup.
You can enable gesture navigation too.
jacomail95 said:
Just asking, any plans or chances for mondrianlte to get an A13 build? I've got that device running an unofficial LOS A11 build (the latest OS available for it), and it still has official TWRP support as of today
Click to expand...
Click to collapse
If someone can find me one to buy?