Database Info

[Q] Pre installed apps, original software, root...

Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.

Ümit said:
Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.
Click to expand...
Click to collapse
1. Probably a fake Xiaomi rom installed from the seller
2. It shouldn't be
3. Pay attention to original rom from Xiaomi, as now the dev rom lock your boatloader, in future stable rom could lock it too.
My advice is to install a custom recovery ( TWRP ), then if you like the miui system you can flash sMiui or Xiaomi.eu rom, otherwise give a try to cyanogen mod.
You can find all info in various thread scattered over the Mi 4c section.

Thanks for the answer.
I searched to information how I can flash TWRP, but I cant find anywhere clean information.
Do you want give me link please?

1. ROM from Xiaomi, but seller modified it....
2. No Root
3. The Best way is stay away from xiaomi official ROM
Another advise... Download Official Xiaomi Fasboot ROM and fastboot tool ...and keep it...for just in case if u want to back stock rom / official rom and sell it......
Install custom recovery TWRP ( Team Superluminal "Cyanogen ROM" or Cofface "Miui ROM") , then flash unofficial MIUI Rom ( sMiui or xiaomi.eu ) or Rom from team Superluminal...enjoy ur great device
custom recovery
how to install just search...
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
Its link what i am using to flash
- download "Download TWRP recovery"....extract it, delete or move 'recovery.img' inside folder.....
- download another recovery (link in my post before) and move .img file in folder u download before ( if name of file blablabla.img, rename to recovery.img )
- make sure ur phone enable usb debugging , go to setting - about phone - see build number and tap several times to enable developer mode...and go to extra setting u will see developer option there and enable usb debugging
- the rest u can check the link...good luck

Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?

Ümit said:
Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?
Click to expand...
Click to collapse
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!

But if I flash twrp recovery, I can install official updates from miui?

Ümit said:
But if I flash twrp recovery, I can install official updates from miui?
Click to expand...
Click to collapse
There is no need of official update, future update from Xiaomi will lock your boatloader... Xiaomi.eu take the official update every week and release their version rapidly, after optimizing and removing Chinese apps...

ice-it said:
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!
Click to expand...
Click to collapse
Hi, I've received my device but went with 7070 rom stock stable and updated to the last one stable, how do I know if the bootloader is unlock or not?? Thanks
Enviado desde mi RAZR HD mediante Tapatalk

[FAQ][Discussion]LineageOS 15.1 by abhishek987 [ask your questions HERE]

Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1:
!NEW AND THE ONLY RECOMMENDED METHOD!​
You must be on Oreo. Before flashing delete all your saved fingerprints and screen locks.
1. Reboot to bootloader (Bootloader must be unlocked)
2. fastboot boot recovery-xx.img (in ADB)
-> Grab official recovery from here: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
3. Wipe System/Data/Cache/Dalvik
4. Flash Lineage & TWRP Installer zip
-> Grab TWRP installer from the link above
5. Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
6. Flash Gapps/MicroG (opengapps.org -> platform ARM64 -> Android 8.1 + Variant [IMO pico is your best pick])
7. Flash Magisk [latest] if you want ROOT (I bet you want!)
-> Grab Magisk from here: http://tiny.cc/latestmagisk
8. Reboot to System
How to update from previous build:
If you don't have permament TWRP, just follow the method above.
If you have permament TWRP:
Delete all your previous fingerprints (just for safety)
Boot to TWRP
Wipe Data/Cache/Dalvik (wiping is optional - but clean flash is always encouraged)
Flash Lineage ROM zip file
Flash Magisk
Flash Gapps/MicroG
Reboot
KNOWN BUGS:​* No bugs right now! Enjoy bug-free rom!
If you have signal stability issues, try this:
Dial *#*#4636#*#*
Go to Phone information
Set Preferred Network Type from Unknown to LTE or WCDMA only
WHAT IS WORKING:​* Everything else
LINEAGE BUILD CHANGELOG:
Code:
[FONT="Arial"]
[B]Most recent build (24.03.2018):[/B]
Fixed portrait mode
Enabled hal3 camera by default
Added doze
Lineage upstream
[B](22.03.2018): [/B]
Fixed double tap to wake (should only work for focaltech panel)
Rebased kernel to latest oreo source drop
Enabled cpusets
Lineage upstreams
[B](13.03.2018): [/B]
Fixed verity issue (builds now can be flashed without magisk)
Fixed Live Display
Fixed Substratum
Fixed ril issues
Lineage Upstream changes
[B](08.03.2018): [/B]
Fixed notification light (should work in call cases now)
Fixed slow charging
Fixed deep sleep issue
Added navbar toggle
Fixed goodix fingerprint issue (should work for all and all 5 fingerprint should be registered now)
Lineage Upstream changes
[B](06.03.2018): [/B]
Fixed led light
Added fingerprint gestures
Fixed Bluetooth name
Fixed battery capacity
Lineage upstream changes[/FONT]
Have fun with LOS!

Q&A
What does NIGHTLY mean?
Nightlies are automatical builds (every few days), so it mean you will have frequent updates, recent Lineage changes will be present in a rom. Also fixes and new stuff will come faster!
How I can go back to stock?
Grab Mi A1 tool from here: https://forum.xda-developers.com/mi-a1/how-to/tool-xiaomi-mi-a1-tool-drivers-unlock-t3742857.
Install it in your PC, enable USB Debugging on your phone, plug phone to PC
Click Flash Stock ROM button
Click Download ROM and wait
Click FlashAll. Your phone will reboot to fastboot and it will start to flash stock
[You will loose all your data, so backup is encouraged]
Do I need to downgrade to Nougat before flashing?
Not anymore It's advised to flash from Oreo
After update my FP don't work, wat to do?!
Make a clean flash using method from OP. If clean flash won't help, try: https://forum.xda-developers.com/mi-a1/development/xiaomi-mi-a1-tissot-firmware-flashable-t3759886
Is Dolby working on Lineage 15.1? How to install it?
Just download Magisk module and enjoy!
My mobile signal is unstable. Is there a way to fix it?
Yes, see a workaround from OP
Why Selinux is permissive, not enforcing?
In unofficial builds Selinux is permissive. If the build goes official, it will have Selinux set to enforcing. Don't worry, just wait for official version!
Is this rom stable enough to be a daily driver?
Depends what you need. Check buglist - if these bugs don't bother you - it can surely be a daily driver
When new build will be avaible?
Don't ask for ETAs. Developers are working hard (in their free time!) to fix a bugs - we just need to wait patiently.

Some users are experiencing wifi issues (myself included). How can i fetch the log?
Steps to reproduce: Turn off bluetooth. wait a moment... wifi will start dropping connection a lot. To fix, just turn on BT again.

Headphones do not work.

Headphones are working!
By the way. I found a bug. The equalizer don't work correct. Everytime when you skip a song you must tap the bass regulator again in the equalizer app. When you don't do it, it plays without bass.

konradit said:
Headphones do not work.
Click to expand...
Click to collapse
Everything fine here, try to reflash

Installed and used for 24 hrs with no apparent problems. No fingerprint bug.
All the other bugs reported in OP exists.
Returned to Stock since I found it a bit smoother.
I will wait for a more stable official build
Good work so far

still

rasputine said:
still
Click to expand...
Click to collapse
Are you using the deadman twrp? I got that using other TWRP versions.

goofball2k said:
Are you using the deadman twrp? I got that using other TWRP versions.
Click to expand...
Click to collapse
Yes I'm using deadman's twrp

rasputine said:
Yes I'm using deadman's twrp
Click to expand...
Click to collapse
Did you reboot after doing the data wipe?

Can I install LOS 15.1 without flashing magisk? I have tried this and had bootloop before any lineageos bootlogo

radogost said:
Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1: ​There's a few working methods. First, most popular one:
....
Third, last one:
Boot to the recovery (same recovery as method above)
Wipe system and cache ( data is optional if your are on Oreo)
Check which partition you are on (A or on partiton B)
Flash the rom on one of the partitions
Flash the twrp installer zip
link: http://www.mediafire.com/file/338o7cl72z52rzz/twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester.zip
Reboot back to the recovery
Switch to the second partition
Flash GAPPS/MicroG and Magisk
Reboot
Click to expand...
Click to collapse
Sorry to pick this up again but the last method implies that TWRP will be installed permanently as default recovery, right? I was successfull only with the first method however I always end up in LOS recovery when try to enter recovery with Vol-up+Power after everything is installed.
I'm sure we all agree that this whole recovery mess needs to be sorted out quickly. Even experienced users are hitting snags and flood the board with questions .

goofball2k said:
Did you reboot after doing the data wipe?
Click to expand...
Click to collapse
Yes sir

i face the same issue with any methond i am using.
in some cases i am unable to install all the zips and in another case i am unable to install only magisk(error 1)
i followed exactly the steps.
any suggestions?

I'm not sure why the issues. I followed the steps in the OP, except I didn't flash TWRP, I just boot to it temporarily.
I did the following:
Flashed 7.11.18 ROM using MiFlash.
Booted into the ROM, set it up minimally.
Rebooted to fastboot, unlocked bootloader
booted temporarily to deadman TWRP, wiped system/cache/dalvik/data (just to be sure it is completely clean)
rebooted and then booted back into deadman TWRP
flashed LOS.
rebooted and then booted back into deadman TWRP
Flashed gapps and magisk.
rebooted to OS.

hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!

Flashed from 8.1.10 without any problems...

ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
---------- Post added at 01:47 PM ---------- Previous post was at 01:47 PM ----------
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?

t0per666 said:
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Click to expand...
Click to collapse
Tornado95 said:
Flashed from 8.1.10 without any problems...
Click to expand...
Click to collapse
Hmm so which one is telling the truth? ??
Sent from my Xiaomi Mi A1 using XDA Labs

[ROM][Stable] MIUI 10 xiaomi.eu

10.3.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117882402
10.3.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397934131
10.2.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397908184
10.2.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603887317
10.0.7.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.0.7.0.PDGCNFH_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603845043
New links will be posted here.

10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?

10.2.1.0 added in OP.

mike freegan said:
10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?
Click to expand...
Click to collapse
Not sure if you ever figured it out but the instructions on EU's site are terrible and not very descriptive.
When they mean when they say "Wipe /Data" is to hit Wipe > Format Data > Type Yes (and swipe to confirm I believe) You will then have to copy over the zip to your phone and flash (That's why the instructions are written that way)
Keep in mind, that this will wipe your internal storage so make a back up. It also takes a long time to boot, longer than clean miui install.

is it possible to flash from one MIUI 10 rom to another? mine is on stock chinese 10 rom now, and can't see any files on the root folder of the phone under recovery. may need to use the rom's flash function.

Hello friends, I hope and can help me, it turns out I have the ROM installed but not let me have permissive the seLinux with the kernel stock, just let me if I put a modified kernel, the problem is that for me none of all the modified kernel gives me the autonomy that gives me and L kernel stock, I want to have the permissive ROM of seLinux with the kernel stock, someone knows how? Thank You for your help

10.2.2.0 added in OP.

Might sound like a silly question, but when the phone was first launched and people applied xiaomi.eu roms, some reported that installing magisk would brick their phones for whatever reason. Is this still the case? I just want to pass my safetynet

10.3.1.0 added in OP.

10.3.1.0 reuploaded: https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/post-480558

10.3.2.0 added in OP.

10.3.2.0 reuploaded.

Havoc Pie downgrade to Havoc Oreo doesnt work

Hey guys. Iam trying 1 week to get Havoc Oreo.
I used this https://forums.oneplus.com/threads/oxygenos-9-0-ota-for-the-oneplus-6.909533/ to get base Oreo Rom on my OP6. This works.
But when i want to flash Havoc Oreo (Havoc-OS-20180904-enchilada-Official.zip) via TWRP (twrp-installer-enchilada-3.2.2-0.zip only this Version works for me) i get a loop in fastboot.
Can someone help me pls?
My instruction:
1. Flash downgrade
2. Go fastboot, boot TWRP
3. Flash TWRP via ADB SIDELOAD
4. Restart to recovery
5. Flash Havoc Oreo via ADB SIDELOAD
6. Restart
7. Bootloop Fastboot mode
thanks for any help.

RockstarLover said:
Hey guys. Iam trying 1 week to get Havoc Oreo.
I used this https://forums.oneplus.com/threads/oxygenos-9-0-ota-for-the-oneplus-6.909533/ to get base Oreo Rom on my OP6. This works.
But when i want to flash Havoc Oreo (Havoc-OS-20180904-enchilada-Official.zip) via TWRP (twrp-installer-enchilada-3.2.2-0.zip only this Version works for me) i get a loop in fastboot.
Can someone help me pls?
My instruction:
1. Flash downgrade
2. Go fastboot, boot TWRP
3. Flash TWRP via ADB SIDELOAD
4. Restart to recovery
5. Flash Havoc Oreo via ADB SIDELOAD
6. Restart
7. Bootloop Fastboot mode
thanks for any help.
Click to expand...
Click to collapse
OK, so I am not sure what exists in the OnePlus forums but lets start with:
1. You are aware there are two sets of partitions on this device correct? If not, please read here: https://forum.xda-developers.com/oneplus-6/how-to/guide-noobs-guide-to-b-partitions-op6-t3816123
2. What are you running now?
3. You need to update your TWRP to blu_spark but I am not sure if the latest (v9.91) works with Oreo... I know that v9.86 works with Oreo for sure. Read and download from here: https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965
4. Get the appropriate OOS zip file from this thread: https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Specifically OOS 5.1.11: https://www.androidfilehost.com/?fid=1322778262903980680
The basic steps should be like this (all assumes you have and unlocked bootloader):
1. If you are running OOS 5.1.11, reboot to fastboot
2. Boot blu_spark TWRP.img - fastboot boot twrp.xxx.img
3. Flash OOS 5.1.11
4. Flash blu_spark TWRP.zip to get it on both slots
5. Reboot to RECOVERY
6. Flash OOS 5.1.11
7. Flash blu_spark TWRP.zip
8. Factory reset in TWRP
9. Flash Havoc Oreo zip
10. Flash blu_spark TWRP.zip
11. Reboot to RECOVERY
12. Flash GApps
13. Flash Magisk (optional if you want root)
14. Flash no-verity if you plan to run unencrypted. (optional)
My advice is to READ READ READ before going forward with anything. The A/B partition layout is far from the traditional days of a single partition layout with a recovery partition. Educate yourself or risk bricking your device and opening up a whole different set of problems.

i do this by step by step but now iam bricked. after all it want restart but it glows only the blue led

RockstarLover said:
i do this by step by step but now iam bricked. after all it want restart but it glows only the blue led
Click to expand...
Click to collapse
It does sound like you READ READ READ before proceeding... My steps were not intended as a step-by-step guide, which is why I said the steps "should look like this". You didn't answer any of my questions, so I have no idea where you started from or where things went wrong to get you into this state...
Can you get into fastboot mode?
If so, try this thread first: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
The fastboot restore method will ONLY work if you know which OOS you were running before you got bricked...
If you can't restore from fastboot images, try this thread: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
I cannot stress enough, you MUST read all the steps and understand what you are doing before doing anything. If you have any questions, ASK before proceeding... Good luck.

thank u for ur help. i used the second method because the first didnt worked and now iam unbricked.
1. You are aware there are two sets of partitions on this device correct?
Click to expand...
Click to collapse
I know it
2. What are you running now?
Click to expand...
Click to collapse
Now iam running Oxygen OS 5.1.5 Android 8.1.0 and Device State is locked
Is this normal that in fastboot shows this bootloader and baseband empty ?
productname - xxx
variant -sdm ufs
bootloader version -
baseband version -
serialnumber - xxxxxxx
secure boot - yes
I want to try again to get havoc oreo. i will w8 for ur response.

RockstarLover said:
thank u for ur help. i used the second method because the first didnt worked and now iam unbricked.
I know it
Now iam running Oxygen OS 5.1.5 Android 8.1.0 and Device State is locked
Is this normal that in fastboot shows this bootloader and baseband empty ?
productname - xxx
variant -sdm ufs
bootloader version -
baseband version -
serialnumber - xxxxxxx
secure boot - yes
I want to try again to get havoc oreo. i will w8 for ur response.
Click to expand...
Click to collapse
You are back up and running, good work! Congrats!
When you say the device is 'locked', you mean the bootloader is locked again? It shows 'Locked' in fastboot? Obviously you need to unlock the bootloader again before proceeding if this is the case...
And 'Yes', it is normal for 'bootloader version' and 'baseband' to be blank. It shows the same on my device anyway, and I can flash custom ROMs with no issues, and everything works.
At this point, you should be able to follow the steps in my post, making sure you first unlock the bootloader (which will wipe all of your data). You might want to format data (not just wipe as well) to start fresh. I would also confirm that there are no issues running Havoc Oreo with encryption (I'd recommend asking the question in the Havoc OnePlus telegram channel, https://t.me/havoconeplus). After people ask to "Why are you running Oreo?!?!", you just might get an answer... I dumped being encrypted after about a week of having this device because it made moving between ROMs more difficult.
In step 14, I mention the no-verity file to remove force encryption. I have attached it to this post. Again, you may want to have /data encrypted (necessity, personal preference etc.) so this isn't mandatory but I found it made flashing different ROM's much easier (personal preference really).

do u know where u find the havoc oreo rom now ? they changed their download directory. and the overview is confusing me.

RockstarLover said:
do u know where u find the havoc oreo rom now ? they changed their download directory. and the overview is confusing me.
Click to expand...
Click to collapse
Looks like they removed Oreo builds, you might be out of luck. Check out XenonHD 8.1 thread if your set on running Oreo, was updated to Dec. Security patch.

hey brother. i have good news. i just want download again havoc oreo cause i deleted the old zip. i had thought maybe the oreo havoc zip was faulty. now i restored it with a restore tool. i tried again and now it works.
IAM ON HAVOC OREO . It starts but now i got a message.
"Android System
A vendor image mismatch has been detected. Typically this means your vendor image is out of date.Please ensure your vendor image matches OPM1.171019.011."
what is this now

RockstarLover said:
hey brother. i have good news. i just want download again havoc oreo cause i deleted the old zip. i had thought maybe the oreo havoc zip was faulty. now i restored it with a restore tool. i tried again and now it works.
IAM ON HAVOC OREO . It starts but now i got a message.
"Android System
A vendor image mismatch has been detected. Typically this means your vendor image is out of date.Please ensure your vendor image matches OPM1.171019.011."
what is this now
Click to expand...
Click to collapse
Did you flash OOS 5.1.11 on both slots? I know you said you were on OOS 5.1.5 when you did the MSM tool restore.
Unsure if the Havoc build you are running requires a certain FW. Usually the devs update the blobs on customer ROMs based on the latest releases of OOS. In this case, 5.1.11 was the last version of OOS Oreo.

i was on 5.1.5 and flashed 5.1.11 on both slots and then i flashed havoc rom

RockstarLover said:
i was on 5.1.5 and flashed 5.1.11 on both slots and then i flashed havoc rom
Click to expand...
Click to collapse
I'd recommend just going to Pie. I haven't run Havoc in over a month but the latest AEX is solid and battery life is excellent. The Pie ROMs have stabilized significantly in the last month.

i just flashed the latest havoc rom now. Really really thanks brother. ur a good boy.
have a good year

[Delay Touch in PUBG Mobo] - Solution !!

Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.

module?

spindlygaming said:
module?
Click to expand...
Click to collapse
I dont use any module except systemless host. Module is not affects my solution.

Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!

thithi1983 said:
I dont use any module except systemless host. Module is not affects my solution.
Click to expand...
Click to collapse
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
thithi1983 said:
Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!
Click to expand...
Click to collapse
why not flash firmware 8.10.25
than flash rom

You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.

mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
r9 is very old

spindlygaming said:
r9 is very old
Click to expand...
Click to collapse
I don't see how this is a problem if everything works perfectly fine.

spindlygaming said:
module?
Click to expand...
Click to collapse
mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
Have you play PUBGm on poco f1? I try many kernel including arter97 r9 and twisted prime 9.1.24 touch driver. Delay touch still happen when i play with 4 fingers claw. Only solution i wrote solved the problem.

spindlygaming said:
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
why not flash firmware 8.10.25
than flash rom
Click to expand...
Click to collapse
I want to flash only vendor but i dont know how to convert vendor.new.dat.br to vendor.img

Flash rom then backup vendor IMG in twrp

JV Spartacus said:
Flash rom then backup vendor IMG in twrp
Click to expand...
Click to collapse
Thanks! You open my mind!

thithi1983 said:
Thanks! You open my mind!
Click to expand...
Click to collapse
Will you share it here so that noobs like me can get it easily.

zip file error problem
thithi1983 said:
Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.
Click to expand...
Click to collapse
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee

mahdih78 said:
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee
Click to expand...
Click to collapse
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.

how???
thithi1983 said:
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.
Click to expand...
Click to collapse
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee

mahdih78 said:
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee
Click to expand...
Click to collapse
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127

thithi1983 said:
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127
Click to expand...
Click to collapse
Arter97 has made it paid I can't download it from this thread

how to install it and made it paid
ThePrathamesh said:
Arter97 has made it paid I can't download it from this thread
Click to expand...
Click to collapse
yeah he is right
i dont know how to install it without zip file
help please man
is your pubg mobile working good know or still have touch delay with this kernel ???

arter kernel download link.
t.me/s/PocoRomNews/2565?q=%23arter