Database Info

Help needed for my bricked device

Hi,
I have a mate 8 L29.
I was on "SimplyGoogle" B172 and wanted to go to KangVip B331.
I follow the OP instructions (at least i think...).
"Guide:
Search your bootloader unlock code, you'll need it later!
Download B321 from here (THX to ajsmsg78)
http://forum.xda-developers.com/show...php?p=66719078
Done
Extract update.app to sdcard/dload
Copy it to your PC! Use Huawei update extractor to extract boot, system, cust
Done
Remove your google account from yiur system!! Very important!!
Reboot to recovery
Full wipe including internal sd
Done...But here i think a made a BIG mistake...instead of wiping, i've done a format i think...
Flash the downloaded zip containing the update app.
Done
reboot to bootloader
flash boot cust system
Done
reboot and wait until chinese screen disappears."
Here, i get stuck with the message "Your device is booting now..."
I'm stuck here... I've try SwissKnife with the "unbrick" part...no result...tried to fastboot flash B170 version to get back to normal...No success.
Tried the 3 button with the dload on my sdcard....worked ones but get stuck at 5%. Since then, no access to it...
So now, i've no recovery...i can access to Erecovery, but i get this message "Getting package info failed"...
I can access fastboot too...but nothing else
Can someone help me please ?
Thanks in advance
Frank

I just fastboot flash the recovery for 4.1 and now i can access it... any clue why only this one ?
Now, when i try to flash any rom in twrp, it's stuck at "write radio image" and end with a "Unknown command [errno]"
Any clues ?
If you can help me to make my mate 8 functionnal again, i will be eternally gratefull !

same problem
tolimad said:
Hi,
I have a mate 8 L29.
I was on "SimplyGoogle" B172 and wanted to go to KangVip B331.
I follow the OP instructions (at least i think...).
"Guide:
Search your bootloader unlock code, you'll need it later!
Download B321 from here (THX to ajsmsg78)
http://forum.xda-developers.com/show...php?p=66719078
Done
Extract update.app to sdcard/dload
Copy it to your PC! Use Huawei update extractor to extract boot, system, cust
Done
Remove your google account from yiur system!! Very important!!
Reboot to recovery
Full wipe including internal sd
Done...But here i think a made a BIG mistake...instead of wiping, i've done a format i think...
Flash the downloaded zip containing the update app.
Done
reboot to bootloader
flash boot cust system
Done
reboot and wait until chinese screen disappears."
Here, i get stuck with the message "Your device is booting now..."
I'm stuck here... I've try SwissKnife with the "unbrick" part...no result...tried to fastboot flash B170 version to get back to normal...No success.
Tried the 3 button with the dload on my sdcard....worked ones but get stuck at 5%. Since then, no access to it...
So now, i've no recovery...i can access to Erecovery, but i get this message "Getting package info failed"...
I can access fastboot too...but nothing else
Can someone help me please ?
Thanks in advance
Frank
Click to expand...
Click to collapse
I have exactly the same problem, it never pass from "Your device is booting now..." , and exactly only the recovery fro 4.1 works (twrp and stock) if i instal any other recovery never works
I tried whit many roms, but anything works
I have a L09 from México
HELP :crying:

L29 - Unbrick
tolimad said:
I just fastboot flash the recovery for 4.1 and now i can access it... any clue why only this one ?
Now, when i try to flash any rom in twrp, it's stuck at "write radio image" and end with a "Unknown command [errno]"
Any clues ?
If you can help me to make my mate 8 functionnal again, i will be eternally gratefull !
Click to expand...
Click to collapse
You will need
1) Huawei Update Extractor ( please check the attachment)
2) SRK tools
3) B170 stock firmware.
4) B321 stock firmware (you need to extract files from this ) - check the below steps.
please check this thread https://forum.xda-developers.com/showpost.php?p=66776218&postcount=2 . It has everything.
Below are the steps from the above link - for L29 users. Please see below - I marked my comments in red for better understanding.
1. Start from stock B170 firmware with TWRP ready
2. Extract BOOT, CUST, RECOVERY, SYSTEM from B321 UPDATE.APP
3. Add firmware .zip file (which contains META-INF folder and UPDATE.APP) and place it into internal storage [ this is B170 zip just putting it in SDcard file ]
4. Make sure internal storage data is fully backed up
5. Delete All Accounts in Settings
6. Go to Recovery, Wipe Cache, Delvik Cache, Data, System
7. Flash that .zip file! (Getting errors is okay at this time) [This is what I didn't do before!] [ Flash that B170 zip file]
8. Boot straight to bootloader
9. fastboot flash boot, cust, and system [ this step is for flashing the extracted boot cust system from B321 ]
10. let it boot. Let it proceed with encryption process in chinese and fully boot into EMUI
11. NOW I'M AT EMUI 4.1!
12. Reboot to fastboot and fastboot flash insecure_boot and flash TWRP [this step - you can ask them why this is required ]
13. Reboot to recovery (TWRP) and then flash whatever rom you want to place in!
14. Enjoying it!
---------------------
Hope this works out for you. Don't forget to :good::good::good::good::good::good::good::good:

Huawei P9 Brick( The easiest way to unbrick)

1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing

Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.

XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1

problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?

To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.

Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.

Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408

phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever

nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.

Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...

I want to android 6.0 as twrp. How ? Pls

That is only for unlocked bootloader??

Link in Step 12 for Nougat s broken

JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!

I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!

Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers

Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You

mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?

zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?

mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

Mate 8 not working properly after erase data from TWRP

hi guys, hopefully someone can help me with my situation. I try to explain as best i can.
My Device: huawei nxt-L29
Build number : nxt-L29c636b585
( I install right firmware for my phone )
1. i follow this guide (https://forum.xda-developers.com/mat...stall-t3301371 ) to Unlock Bootloader, Root, Install TWRP & Decrypt.
All working perfectly until last step "Decrypt",
Instead of format data - type yes... I do my mistake by click Advance Wipe and click Erase Data. And the phone stuck on loop bootloader.
2. I try to flash stock recovery for nougat and flash UPDATE.APP on EMUi recovery but failed.
Then I follow this guide for huawei p8 because i cannot find any related entry similar with my situation in Mate 8 forum ( https://forum.xda-developers.com/hua...ailed-t3260704). And use Huawei Extractor to extract boot.img, system.img and recovery.img and flash it in fastboot mode.
All work perfectly and my phone restart like normal.
3. The problem after my phone unable to lock gps correctly (cannot use all because always changing position),cannot turn on bluetooth and unable to change ringtone/notification, and maybe a few more problem. i think its because I didnt flash all file in UPDATE.APP.
4. The question is how do i flash UPDATE.APP and get it fully work, because if i flash on EMUI recovery it always failed 5%?

Help! L29C432 Mate 8 bricked

Hi,
I believe I bricked my Mate 8 when I wanted to go back from rooted B320 to stock firmware via offered OTA. After OTA ran through device rebooted and got stucked in black screen. After this I tried flashing everything to get the device back working: dload B320, dload B330, dload B180, rollback method etc. Some of the trimes the dload ran through to 100% but after reboot the Huawei logo appeared and after 2 seconds I get a black screen. When I reinstall TWRP for EMUI 4.1 I it can't mount data and storage. I treid to restore an older backup with no sucess (backup was installed but phone not booting)
What I still can do is:
-enter fastboot mode
-unlock bootloader
-flash files via fastboot
-install and boot into TWRP for 4.1
Is there a step by step guide to get this device back working to stock firmware?
Thank you very much in advance for your help!

kika1992 said:
Hi,
I believe I bricked my Mate 8 when I wanted to go back from rooted B320 to stock firmware via offered OTA. After OTA ran through device rebooted and got stucked in black screen. After this I tried flashing everything to get the device back working: dload B320, dload B330, dload B180, rollback method etc. Some of the trimes the dload ran through to 100% but after reboot the Huawei logo appeared and after 2 seconds I get a black screen. When I reinstall TWRP for EMUI 4.1 I it can't mount data and storage. I treid to restore an older backup with no sucess (backup was installed but phone not booting)
What I still can do is:
-enter fastboot mode
-unlock bootloader
-flash files via fastboot
-install and boot into TWRP for 4.1
Is there a step by step guide to get this device back working to stock firmware?
Thank you very much in advance for your help!
Click to expand...
Click to collapse
Try installing a rollback package that corresponds to your firmware. I tried 2 and failed at 5%. When I put the update.app from b330 on SD card and tried dload method, it worked. Only difference was my screen wasn't going black. I think the problem is the same as I had, Your phone is trying to find the boot.img but can't because what you have is incompatible.
Have a look at somboons post in mate 8 development. SRK tool is pretty good for mate 8 and other Huawei devices. Read the posts. I think rollback packages are your best bet though.
Sent from my AL10 using Tapatalk

Hi, I managed it now with DC Phoenix. After testing hundreds of combinations phone booted wit method 2 and AL10 Boardsoftware and L29C900B187 Firmware. Upgrade install went wrong with the following output:
18.01.2018 15:39:33 Starting to write device in UPGRADE mode...
File to update: NXT-L29B_C900B187_Firmware_Nonspecific_HQ_Nonspecific_Android6.0_EMUI4.0.APP
Validating file...
Looking for attached port...
Preparing to write...
Writing partition: SHA256RSA...OK
Writing partition: CRC...OK
Writing partition: CURVER...OK
Writing partition: VERLIST...
Error downloading file NXT-L29B_C900B187_Firmware_Nonspecific_HQ_Nonspecific_Android6.0_EMUI4.0_3.dtwork, partition: VERLIST
Error writing software
18.01.2018 15:39:54 Starting to write device in UPGRADE mode...
File to update: NXT-L29B_C900B187_update_data_hw_eu.APP
Validating file...
Looking for attached port...
Preparing to write...
Device does not support this update file
Error writing software
18.01.2018 15:40:14 Writing device finished with ERROR [/SIZE][/FONT][/FONT][/SIZE][/SIZE]
But after reboot phone started and shows now NXT-L29C432B187 Firmware. Will I receive OTA updates now or do I have to flash somethiing manually to get to Android 7.0?

OTA with C432 should work, try HI suite via PC...
C900 - dont receive OTA

everything fine now - I managed it with DC Phoenix AL10 Boardsoftware & C432B170 Firmware. Device bootet and I was able to receive OTA updates to B192 and B560.
Now I have to correct the Serial number wit HCU Tool.
Thank you very much for the support.

Help me downgrade to nougat from oreo bln-l22

I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed

ratnesh1992 said:
I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed
Click to expand...
Click to collapse
To keep the phone in usable state you can move to Elemental Rom,, i had the same issue. problem faced with Elemental Rom now is that camera, fingerprint and flash doesn't work. rest of the phone is usable in perfect condition.

ppawan said:
To keep the phone in usable state you can move to Elemental Rom,, i had the same issue. problem faced with Elemental Rom now is that camera, fingerprint and flash doesn't work. rest of the phone is usable in perfect condition.
Click to expand...
Click to collapse
how can i switch to elemental rom, im stuck at erecovery?
my bootloader is locked and already lost my unlocked code?

if your phone model is bln-l22c675 then download B360 full package and flash by dload method us sdcard for dload method

ratnesh1992 said:
I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed
Click to expand...
Click to collapse
your problem is easy to solve. do u have stock emui8 rom that you have flashed then extract update.app then download hauwei update extractor and load this update app. if it fails to load then untick something like md5 check in options then it will load. now extract these images from list
RAMDISK.img, RECOVERY_RAMDIS.img, and KERNEL.img.
now keep then in fastboot folder connect you phone to pc by holding vol - you will enter into fastboot then flash these images in order
fastboot flash ramdisk RAMDISK.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash kernel KERNAL.img
then reboot your device will boot fine if it enter into recovery and asks to formate data don't do it just do reboot.

Ramesh006 said:
your problem is easy to solve. do u have stock emui8 rom that you have flashed then extract update.app then download hauwei update extractor and load this update app. if it fails to load then untick something like md5 check in options then it will load. now extract these images from list
RAMDISK.img, RECOVERY_RAMDIS.img, and KERNEL.img.
now keep then in fastboot folder connect you phone to pc by holding vol - you will enter into fastboot then flash these images in order
fastboot flash ramdisk RAMDISK.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash kernel KERNAL.img
then reboot your device will boot fine if it enter into recovery and asks to formate data don't do it just do reboot.
Click to expand...
Click to collapse
Will this process works on locked bootloader?

alamatnitotoy said:
Will this process works on locked bootloader?
Click to expand...
Click to collapse
No in locked bootloader u can't flash anything

bln-l22 flashing hwota8 goes wrong , while rebranding i dont know why i did this . Now my bootloader is locked ,frp unlock . Erecovery not restoring firmware , Dload method not working no sign of any progress everytime device boot's in erecovery mode.
Help me out coz you all know honor services only 3 service center in delhi and they even don't about what is bootloader, Only XDA guys can help.

doray880 said:
bln-l22 flashing hwota8 goes wrong , while rebranding i dont know why i did this . Now my bootloader is locked ,frp unlock . Erecovery not restoring firmware , Dload method not working no sign of any progress everytime device boot's in erecovery mode.
Help me out coz you all know honor services only 3 service center in delhi and they even don't about what is bootloader, Only XDA guys can help.
Click to expand...
Click to collapse
Do you have unlock code for Bootloader. Unlock Bootloader again

I am also stuck same issue

Test to flash nougat rom with HurUpdater 0.3