Database Info

Bricked honor 8

Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.

LuneTech said:
Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.
Click to expand...
Click to collapse
Was ur bootloader and frp in unlocked state ?
Sent from my KIW-L22 using Tapatalk

gopinaidu77 said:
Was ur bootloader and frp in unlocked state ?
Click to expand...
Click to collapse
Yes. And it still is

LuneTech said:
Yes. And it still is
Click to expand...
Click to collapse
So u can still recovery your phone
Sent from my KIW-L22 using Tapatalk

LuneTech said:
Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.
Click to expand...
Click to collapse
Hi, i have the exact same problem...
Have you figgerd it out?

Lucas Napik said:
Hi, i have the exact same problem...
Have you figgerd it out?
Click to expand...
Click to collapse
Yes. I installed a roll back update (something like that) by getting into the force update mode. After it finished, I had to then apply the full stock firmware. The problem was that I somehow put the firmware of another phone, because my model number was from a different Huawei phone.

trying to get back to stock
gopinaidu77 said:
So u can still recovery your phone
Sent from my KIW-L22 using Tapatalk
Click to expand...
Click to collapse
Hi. I got tired of CM13, so I tried to go back to stock. I checked a guide online which told me to flash 2 files using TWRP. after that, I lost twrp and now my bootloader is locked. What do I do? I manually did an update with the update.app file, and it says update success, but when it reboots it stays on the honor 8 screen, I waited for 25 minutes and it's still there.

LuneTech said:
Hi. I got tired of CM13, so I tried to go back to stock. I checked a guide online which told me to flash 2 files using TWRP. after that, I lost twrp and now my bootloader is locked. What do I do? I manually did an update with the update.app file, and it says update success, but when it reboots it stays on the honor 8 screen, I waited for 25 minutes and it's still there.
Click to expand...
Click to collapse
Try going into stock recovery and doing a factory reset after you use the update.app. You'll have to unlock the bootloader again and flash twrp if you want root.
Restoring to MM using a full image will typically lock the bootloader.

It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).

eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
2 things, 1 is that there are 2 recovery files in the UPDATE.APP, and 2 is that I can't do a factory reset from the recovery, because it brings me to the erecovery and it doesn't give me the option to factory reset.

LuneTech said:
2 things, 1 is that there are 2 recovery files in the UPDATE.APP, and 2 is that I can't do a factory reset from the recovery, because it brings me to the erecovery and it doesn't give me the option to factory reset.
Click to expand...
Click to collapse
You need to hold VOLUME UP and POWER button with the phone off to get into the recovery to do a factory reset. Once the honor logo pops up, you can release the power and volume up buttons.
Recovery.img = Stock recovery
Recovery2.img = eRecovery

eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
I just did everything exactly the way you said. But it still stays at the honor boot logo. I don't mind waiting over night for it to boot up if I have to, but I've never had a phone take this long to boot up, even on first boot.

For a "brick" thread, it seems odd that the model is never mentioned so that someone can really point you to the right spot. If you keep going to erecovery, then it has to do with whether or not your cable is plugged in (likely you've been keeping it plugged in for your fastboot attempts, or that's a guess). I only go to erecovery with both up/down & power if the cable is plugged in. If I want to get to stock recovery (regardless of what the hell is in the "recovery" partition, TWRP, or who knows?) then I unplug it before trying any key combo from power off to get there.
Lastly, if you use this sort of thing as a template (I'm just going to use one for the frd-l09 as an example, but stick the right model in there for you) ::
Example to plug into Google to find your rollback with instructions:: site:consumer.huawei.com honor 8 frd-l09 rollback
Click to expand...
Click to collapse
So if you've got an frd-l04 then plug that in where frd-l09 is. It'll just look on the site consumer.huawei.com just above where the various country/variant breakdowns are, like US/ZH/HU/Etc. are.
Pick the one out that is closest to what it seems you want. All the pages are in the local languages so I'm guessing the .pdf that explains what to do is in the language you'll want as well.
Good luck:: Let us know what model phone you have.
More: Contents of first "intermediate" update.app is 8 image files. I'm sure the 2nd one that is specifically your own phone's version of b162 has a lot more files in it. I've not looked for awhile but I think it's 21 or 22 files. This is a two step process, first is all the crap that comes in update.app from the rollback page (just a 100K file which sets you up in intermediate state for rollback) and 2nd you find your exactly right b162 for your model phone, and pretty much repeat the process.
Yet More: One odd thing about the Honor 8: I've not seen it on other phones is the partition layout is not really "trustworthy" unless you really have gotten to understand it. There appears to be at least 3 or 4 places you can get to that I used to think would all have to be in the recovery partition, but apparently the Honor 8 works differently, so no matter how bleak your odds seem, .. maybe not. I got to both erecovery and stock recovery and rollback while TWRP was installed and it worked just following the directions from their website.

Agreed on this thing.

eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
Thank you very much, you saved me and my phone !!!
I made a mistake: my phone was under android m and I flashed by mistake the rollback update (to go m from n), then my honor was bricked on bootloop, no recovery, no update by dload....nothing worked....
Your solution was the right one !! again thank you very much

Interesting observation with the eRecovery (recovery2 partition). So I have TWRP installed, the system partition modified and user storage not encrypted. I was still able to to use eRecovery to connect to WiFi and download the factory image and it automatically repaired the phone to factory state. I noticed it doesn't re-lock the bootloader afterward. This seems to be the easiest method to unbrick.
Getting into eRecovery.

hi! Or extract the files? sorry for my english

eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
Ok after the factory reset (which is peppered with mounting errors)...
failed to mount /data (invalid arguments)
unable to mount storage
When I try to flash cust.img and system.img they both fail.
I cannot check what firmware I was on before I started all this, but I believe it was the latest one. This is a FRD-04. I flashed TWRP 3.1.0.1 erecovery and I can access it and fastboot.
I have tried various different things and nothing I do can unbrick the phone. Any help would be appreciated.

menriquez said:
Ok after the factory reset (which is peppered with mounting errors)...
failed to mount /data (invalid arguments)
unable to mount storage
When I try to flash cust.img and system.img they both fail.
I cannot check what firmware I was on before I started all this, but I believe it was the latest one. This is a FRD-04. I flashed TWRP 3.1.0.1 erecovery and I can access it and fastboot.
I have tried various different things and nothing I do can unbrick the phone. Any help would be appreciated.
Click to expand...
Click to collapse
have the same problem as you on my FRD-09.

I don't have this phone anymore, but the easiest way I find to restore it is using eRecovery.

Mate 8 not working properly after erase data from TWRP

hi guys, hopefully someone can help me with my situation. I try to explain as best i can.
My Device: huawei nxt-L29
Build number : nxt-L29c636b585
( I install right firmware for my phone )
1. i follow this guide (https://forum.xda-developers.com/mat...stall-t3301371 ) to Unlock Bootloader, Root, Install TWRP & Decrypt.
All working perfectly until last step "Decrypt",
Instead of format data - type yes... I do my mistake by click Advance Wipe and click Erase Data. And the phone stuck on loop bootloader.
2. I try to flash stock recovery for nougat and flash UPDATE.APP on EMUi recovery but failed.
Then I follow this guide for huawei p8 because i cannot find any related entry similar with my situation in Mate 8 forum ( https://forum.xda-developers.com/hua...ailed-t3260704). And use Huawei Extractor to extract boot.img, system.img and recovery.img and flash it in fastboot mode.
All work perfectly and my phone restart like normal.
3. The problem after my phone unable to lock gps correctly (cannot use all because always changing position),cannot turn on bluetooth and unable to change ringtone/notification, and maybe a few more problem. i think its because I didnt flash all file in UPDATE.APP.
4. The question is how do i flash UPDATE.APP and get it fully work, because if i flash on EMUI recovery it always failed 5%?

Help with a bricked honor 8 FRD-L14

The issue I am having is that my honor 8 (FRD-L14) is stuck on "your device is booting now.." and it does not shut down. If I hold the power button until it shuts down then it restarts by itself and it keep doing the same thing over and over.
When it first starts and the blue screen and the logo come up the phone vibrate twice and then it displays "your device is booting now..." and it gets stuck there
Here is what I can and cant do:
I can go into fastboot and it shows that the phone is unlocked and the FRP is unlocked
I can flash TWRP from there and I can go into TWRP
When I check in TWRP for partitions I can see CUST or DATA and it shows that the INTERNAL STORAGE size is ZERO
I was able to create the system partition but I am not sure if I did it right.
the dload folder on the SD Card has the role back but the three finger thing (vol+ and vol- and power does not start the system restore from update.app) instead it gets stuck on " your device is booting now..."
I tried Huawei_Multi-Tool and I chose the "unbrick option"...I extracted system.img, boot.img, recovery.img and cust.img and the tool was able to push all images to the device but still the device does not start.
The original stock recovery is not accessible either even if I flash the stock recovery image from TWRP
Any tips on how to resolve this?
Thanks in advance guys

fidzi_1981 said:
The issue I am having is that my honor 8 (FRD-L14) is stuck on "your device is booting now.." and it does not shut down. If I hold the power button until it shuts down then it restarts by itself and it keep doing the same thing over and over.
When it first starts and the blue screen and the logo come up the phone vibrate twice and then it displays "your device is booting now..." and it gets stuck there
Here is what I can and cant do:
I can go into fastboot and it shows that the phone is unlocked and the FRP is unlocked
I can flash TWRP from there and I can go into TWRP
When I check in TWRP for partitions I can see CUST or DATA and it shows that the INTERNAL STORAGE size is ZERO
I was able to create the system partition but I am not sure if I did it right.
the dload folder on the SD Card has the role back but the three finger thing (vol+ and vol- and power does not start the system restore from update.app) instead it gets stuck on " your device is booting now..."
I tried Huawei_Multi-Tool and I chose the "unbrick option"...I extracted system.img, boot.img, recovery.img and cust.img and the tool was able to push all images to the device but still the device does not start.
The original stock recovery is not accessible either even if I flash the stock recovery image from TWRP
Any tips on how to resolve this?
Thanks in advance guys
Click to expand...
Click to collapse
You said you can go into TWRP right. Just rebrand the device to L19 :angel:
First format data
Then flash the rebrand.zip
Then reboot and if it doesn't boot first go into recovery and factory reset then let it boot up again.

Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?

wasiq224 said:
Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?
Click to expand...
Click to collapse
He said he tried to enter recovery with no luck, and he also tried the 3 button dload method.

wasiq224 said:
Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?
Click to expand...
Click to collapse
I tried flashing the stock recovery but it does not work. I also tried the 3-buttons and it did not work either
when I go into TWRP it shows that the size of the internal storage is ZERO

damenbm said:
You said you can go into TWRP right. Just rebrand the device to L19 :angel:
First format data
Then flash the rebrand.zip
Then reboot and if it doesn't boot first go into recovery and factory reset then let it boot up again.
Click to expand...
Click to collapse
Where can I find the rebrand.zip file?

Here are the full instructions :victory:
https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220

damenbm said:
Here are the full instructions :victory:
https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thanks. I will give it a try and flash it and see if it can re-create the missing partitions :fingers-crossed::fingers-crossed:

fidzi_1981 said:
Thanks. I will give it a try and flash it and see if it can re-create the missing partitions :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Best of luck :angel: let me know how it goes please!

damenbm said:
He said he tried to enter recovery with no luck, and he also tried the 3 button dload method.
Click to expand...
Click to collapse
Yes, but he tried the dload method before flashing stock recovery, and he was flashing stock recovery using twrp rather than fastboot.

Thanks but I tried dload after I flashed the stock recovery.
And I tried flashing the stock recovery using facebook and twrp and neither ways succeeded

fidzi_1981 said:
Thanks but I tried dload after I flashed the stock recovery.
And I tried flashing the stock recovery using facebook and twrp and neither ways succeeded
Click to expand...
Click to collapse
Did the rebrand work? Did it make you go back to stock?

damenbm said:
Did the rebrand work? Did it make you go back to stock?
Click to expand...
Click to collapse
Not yet. I'm at work. I'll give it a go tonight

For me it worked after trying to get my FRD-L09 back to work again after I couldnt flash system and not boot anywhere but twrp.
Thanks for the help!

fidzi_1981 said:
Not yet. I'm at work. I'll give it a go tonight
Click to expand...
Click to collapse
I had the same exact issue 5 days ago.
Here's what I did to solve it
NOTE - This is FRD-L14 SPECIFIC
First, Download these files -
1) FRD-L04 Original Recoveries and Boot Image
2) FRD-04 Rollback Package from Huawei
3) FRD-L04 Official MM ROM from Huawei
4) FRD-L14 Specific Stock MM ROM Update.zip
Assuming Bootloader is unlocked
Here's what you should do
-Unzip the Recoveries and Boot image folder
-Unzip Rollback Package
-Make a folder called "dload" (without the quotes) in the root of your SD Card
-Place the Update.app from the Rollback Package in there
-Make sure you have ADB and Fastboot installed - Installer
-Boot into fastboot by Plugging in your USB Cable and Holding Power + Volume Down. This may take multiple tries and multiple reboots to get it right depending on the reboot loop.
-Once phone is in Fastboot, go into the Recoveries and Boot folder, hold Shift and right Click. Click on open Command Window Here.
-If the option says "Powershell" instead, open Command prompt manually, and cd to that directory, or change this option in your settings.
-With command prompt open, do -
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash recovery2 recovery2.img
Code:
fastboot flash boot boot.img
IMPORTANT - Make sure you unplug the cable from the phone and are ready to press both volume buttons at the same time after it reboots
If you dont get it the first time,hold all 3 buttons at the same time to make it reboot and go into that mode.
Code:
fastboot reboot
-Remove cable, press both Buttons at the same time
-It should go into stock recovery and start flashing the Rollback package
-Wait for it to finish, it should reboot automatically
-After it reboots, you should notice that it went back to the same state it was, so reboot into fastboot and flash recovery, recovery2, and the boot image again.
-This time, put the Update.app from the Official L04 Rom you downloaded from the Huawei website in the "dload" folder of the SDCard
-Fastboot Reboot, Remove cable, and Press buttons again. This time it will flash the Official ROM, so it will take longer.
-If it says error right at 99%, reboot, it flashed correctly but it displays an error.
-If it says error anytime before the end of flash, reboot and try again.​-After it reboots, you will notice you are able to boot again. BUT, you are not able to update due to it being branded as L04, sooooo
-Place the Update.app from the 4th link (L14 Specific ROM) in the "dload" folder of SD Card
-Three button method into the recovery flash again.
-It will start to flash the L14 Specific ROM on top of the L04 one.
-After it flashes it and reboots, reboot one more time once you are inside android so it encrypts the ROM.
-(Optional) Update to Nougat, apply other updates after that (There's like 3 Updates I think)
-At this point you have a 100% Stock FRD-L14 Honor 8 but, you can also
-(Optional) Reunlock Bootloader
-Profit?

JvaOneShotzXprX said:
I had the same exact issue 5 days ago.
Here's what I did to solve it
NOTE - This is FRD-L14 SPECIFIC
First, Download these files -
1) FRD-L04 Original Recoveries and Boot Image
2) FRD-04 Rollback Package from Huawei
3) FRD-L04 Official MM ROM from Huawei
4) FRD-L14 Specific Stock MM ROM Update.zip
Assuming Bootloader is unlocked
Here's what you should do
-Unzip the Recoveries and Boot image folder
-Unzip Rollback Package
-Make a folder called "dload" (without the quotes) in the root of your SD Card
-Place the Update.app from the Rollback Package in there
-Make sure you have ADB and Fastboot installed - Installer
-Boot into fastboot by Plugging in your USB Cable and Holding Power + Volume Down. This may take multiple tries and multiple reboots to get it right depending on the reboot loop.
-Once phone is in Fastboot, go into the Recoveries and Boot folder, hold Shift and right Click. Click on open Command Window Here.
-If the option says "Powershell" instead, open Command prompt manually, and cd to that directory, or change this option in your settings.
-With command prompt open, do -
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash recovery2 recovery2.img
Code:
fastboot flash boot boot.img
IMPORTANT - Make sure you unplug the cable from the phone and are ready to press both volume buttons at the same time after it reboots
If you dont get it the first time,hold all 3 buttons at the same time to make it reboot and go into that mode.
Code:
fastboot reboot
-Remove cable, press both Buttons at the same time
-It should go into stock recovery and start flashing the Rollback package
-Wait for it to finish, it should reboot automatically
-After it reboots, you should notice that it went back to the same state it was, so reboot into fastboot and flash recovery, recovery2, and the boot image again.
-This time, put the Update.app from the Official L04 Rom you downloaded from the Huawei website in the "dload" folder of the SDCard
-Fastboot Reboot, Remove cable, and Press buttons again. This time it will flash the Official ROM, so it will take longer.
-If it says error right at 99%, reboot, it flashed correctly but it displays an error.
-If it says error anytime before the end of flash, reboot and try again.​-After it reboots, you will notice you are able to boot again. BUT, you are not able to update due to it being branded as L04, sooooo
-Place the Update.app from the 4th link (L14 Specific ROM) in the "dload" folder of SD Card
-Three button method into the recovery flash again.
-It will start to flash the L14 Specific ROM on top of the L04 one.
-After it flashes it and reboots, reboot one more time once you are inside android so it encrypts the ROM.
-(Optional) Update to Nougat, apply other updates after that (There's like 3 Updates I think)
-At this point you have a 100% Stock FRD-L14 Honor 8 but, you can also
-(Optional) Reunlock Bootloader
-Profit?
Click to expand...
Click to collapse
Thanks! i will give this a try since flashing the rebranding zip file that was suggested in one of the posts did not work out for me.
However, do you think that this w=method will work despite the fact that I do not have a valid DATA or CUST partitions?
Thanks again for responding to my post!!

fidzi_1981 said:
Thanks! i will give this a try since flashing the rebranding zip file that was suggested in one of the posts did not work out for me.
However, do you think that this w=method will work despite the fact that I do not have a valid DATA or CUST partitions?
Thanks again for responding to my post!!
Click to expand...
Click to collapse
No problem!
That shouldn't matter, this will get you to 100% stock, so all of those partitions will be reflashed.

JvaOneShotzXprX said:
No problem!
That shouldn't matter, this will get you to 100% stock, so all of those partitions will be reflashed.
Click to expand...
Click to collapse
It worked!!!
Thanks a lot!
but this is what happened:
After i flashed recovery, recovery2 and boot images, I rebooted the phone and it went straight to stock recovery and it asked me download stock firmware and stock recovery which was 1.66GB so I allowed and it downloaded it and flashed everything and did a reset and the phone booted normally.
The stock firmware that it downloaded and flashed was B122 MM.
One question though, does the flashing sequence of the recovery, recovery2 and boot matter?
Before you posted your post, I had tried flashing these three files in the following order: boot, then recovery then recovery2 but it never worked.
Also, the three images that tried to flash were extracted from the update.app from this firmware (FRD-L14C567B162_FULL) so I was not sure what was going wrong.
Thanks again for your help!! :victory::good::highfive:

fidzi_1981 said:
It worked!!!
Thanks a lot!
but this is what happened:
After i flashed recovery, recovery2 and boot images, I rebooted the phone and it went straight to stock recovery and it asked me download stock firmware and stock recovery which was 1.66GB so I allowed and it downloaded it and flashed everything and did a reset and the phone booted normally.
The stock firmware that it downloaded and flashed was B122 MM.
One question though, does the flashing sequence of the recovery, recovery2 and boot matter?
Before you posted your post, I had tried flashing these three files in the following order: boot, then recovery then recovery2 but it never worked.
Also, the three images that tried to flash were extracted from the update.app from this firmware (FRD-L14C567B162_FULL) so I was not sure what was going wrong.
Thanks again for your help!! :victory::good::highfive:
Click to expand...
Click to collapse
It shouldn't matter, but I included it because sometimes those get corrupted like what happened to me. I'll probably be testing it out completely and making a guide. Looks like you had it better than I did though! I'm glad you got it fixed! :highfive:

JvaOneShotzXprX said:
It shouldn't matter, but I included it because sometimes those get corrupted like what happened to me. I'll probably be testing it out completely and making a guide. Looks like you had it better than I did though! I'm glad you got it fixed! :highfive:
Click to expand...
Click to collapse
Thanks for the help again. I would not have been able to rescue the phone without your tips. :good::highfive:

bricked honor 8

Hi, i have a honor 8 FRD-L09 unlocked bootloader, I don't know what was the original rom. I can't start it, I tried to install many versions, with dload nothing is working it stops at 5% and gives an error,I achieved to get one at 25% but it then failed but with fastboot and huawei extractor im able to install recovery,boot,system img files but it doesn't changes anything. I have access to erecovery but when I try to connect to a wifi it says that it's a wrong password even though im sure it's the right. If anyone is able to help me it could be nice, Thank you.
I installed twrp recovery but it still boots on emui erecovery.

Hello OG_Winzer
I installed twrp recovery but it still boots on emui erecovery.
Click to expand...
Click to collapse
You need to remove your USB cable to boot on TWRP (press "Power" and "Vol+" buttons, and only release "Power" - only hold "Vol+" - button when first blue screen appears).
If your phone is stuck on message "Device is booting...", you flashed a wrong TWRP version. Ask me if you want to try an another version.
But firstly, did you try this how-to (dload folder method): https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449 ?
Is there a model number written bottom back of your phone? (real FRD-L09 model?)
Good luck! =)

Micdu70 said:
Hello OG_Winzer
You need to remove your USB cable to boot on TWRP (press "Power" and "Vol+" buttons, and only release "Power" - only hold "Vol+" - button when first blue screen appears).
If your phone is stuck on message "Device is booting...", you flashed a wrong TWRP version. Ask me if you want to try an another version.
But firstly, did you try this how-to (dload folder method): https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449 ?
Is there a model number written bottom back of your phone? (real FRD-L09 model?)
Good luck! =)
Click to expand...
Click to collapse
I just tried this dload method but the software installation failed at 30%. I don't even know if flashing twrp is really useful and the number on the back of the phone is FRD-L09. I don't know what to do.

OG_Winzer said:
I just tried this dload method but the software installation failed at 30%. I don't even know if flashing twrp is really useful and the number on the back of the phone is FRD-L09. I don't know what to do.
Click to expand...
Click to collapse
Is it "Rollback package" UPDATE.APP which fail at 30%? Try "firmware B131" UPDATE.APP directly, if you have not.
I don't know about extracting ".img" from an UPDATE.APP file and flashing them... seems dangerous. ^^
If you boot on TWRP, you will be able to follow this thing (use FRD-L09 link and do all steps and step 5. fully: "Dlload For FRD-L09" flash to complete properly): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
I can't help you more if it fails again, sorry...

Micdu70 said:
Is it "Rollback package" UPDATE.APP which fail at 30%? Try "firmware B131" UPDATE.APP directly, if you have not.
I don't know about extracting ".img" from an UPDATE.APP file and flashing them... seems dangerous. ^^
If you boot on TWRP, you will be able to follow this thing (use FRD-L09 link and do all steps and step 5. fully: "Dlload For FRD-L09" flash to complete properly): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
I can't help you more if it fails again, sorry...
Click to expand...
Click to collapse
Rollback package is okay but the firmware fails. I've tried the method with twrp but system.img won't install. I even tried to extract it and install it with fastboot but it says "cannot load system.img"

OG_Winzer said:
Rollback package is okay but the firmware fails. I've tried the method with twrp but system.img won't install. I even tried to extract it and install it with fastboot but it says "cannot load system.img"
Click to expand...
Click to collapse
Try this 10 steps, that's the last idea I could give you...
0. Need an unlocked bootloader / Knowing how to boot on bootloader and use adb/fastboot command-line tools. (GUIDE HERE)
1. Download TWRP:
-- 1a) Recent version (EMUI 5.x installed firmware): twrp-3.1.1-1-frd.img and use fastboot command to flash it
Code:
fastboot flash recovery twrp-3.1.1-1-frd.img
>>>> If phone is stuck on message "device is booting now..." when you try to boot TWRP, use old version.
-- 1b) Old version (EMUI 4.1 installed firmware): twrp-3.0.2-0-frd-modaco-rc1.img and use fastboot command to flash it
Code:
fastboot flash recovery twrp-3.0.2-0-frd-modaco-rc1.img
2. Download this modded FRD-L09C432B131 firmware (.zip): here
3. Copy the zip file to your SD card. (You can do that when your phone is booted on TWRP: plug your USB cable)
4. In TWRP, go to "Wipe" > "Format Data".
5. In TWRP, go to "Flash" > Select the zip file and flash!
6. When finished, do step 4 again before rebooting your phone!
7. Phone can take some minutes to boot, take it easy! If it works, download "stock" (original) B131 firmware: https://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
8. Open the zip file and extract "dload" folder on your computer. Then copy the "dload" folder inside your SD card (root of the SD card).
9. Flash it with "Power" + "Vol-" + "Vol+" buttons.
10. Last step (RECOMMENDED) - Factory reset: how-to
:fingers-crossed:

MHA-L29 US Huawei Mate 9 EMUI 8.0 softbrick Lost my Backup Need Firmware help. TIA

So I have and Unlocked bootloader, TWRP for Android Oreo, and Root. I did a backup of the existing system but like an idiot when I was clearing the DAVLIK and User space I also formated the MicroSD and subsequently my backup.
I tried following the different guides to reload the base system but I'm not having any luck I must have done something royally wrong but at this point I don't even care if I revert back to stock I just want something other then the endless boot loop that is currently my reality.
I've tried downloading the update.zip files from http://pro-teammt.ru/firmware-database/ but the images are not posting properly when I try from TWRP or Fastboot. I tried reverting the recovery back to stock and trying to use OpenKirin and again no luck. Can someone point to the proper firmware with what ever recovery.img, kernal ramdisk.img, and or system.img I need to extract.
I'm missing something or am I using old guides with newer software release.
Thanks in Advance

Okay so I finally figured out why I was receiving errors when I tried to extract the kernel.img, system.img, and recovery.img from the update.app files in Huawei Update Extractor. Apparently Huawei turned off CRC checks on the newer files and once they are disabled in the settings they images open up fine. Going to try and flash a build with fastboot.

Process I'm going to undertake to try and restore the system.img for my MHA-L29C567 device. Currently my Bootloader is Unlocked, and I am able to access Fastboot&Rescue Mode so I intend on manually updating the MHA-L29C567B367 (8.0.0.367) Update using Fastboot.
1) Go to http://pro-teammt.ru/firmware-database/?firmware_model=MHA-L29C567&firmware_page=0 and Download MHA-L29C567B367 (8.0.0.367) Update.zip
2) Unzip/decompress update.zip and use HuaweiUpdateExtractor_0.9.9.5 with CRC checks turned off in setting to avoid error opening Update.app.
3) Extract System.img and Kernel.img and apply to phone using following commands in windows command terminal with Phone in Fastboot&Rescue Mode (Hold Power and Volume Down)
fastboot flash system SYSTEM.img
fastboot flash kernel Kernel.img
4) Reboot phone with command fastboot reboot
5) Wipe DAVLIK User Space and cross my fingers it boots.

smtelegadis said:
Process I'm going to undertake to try and restore the system.img for my MHA-L29C567 device. Currently my Bootloader is Unlocked, and I am able to access Fastboot&Rescue Mode so I intend on manually updating the MHA-L29C567B367 (8.0.0.367) Update using Fastboot.
1) Go to http://pro-teammt.ru/firmware-database/?firmware_model=MHA-L29C567&firmware_page=0 and Download MHA-L29C567B367 (8.0.0.367) Update.zip
2) Unzip/decompress update.zip and use HuaweiUpdateExtractor_0.9.9.5 with CRC checks turned off in setting to avoid error opening Update.app.
3) Extract System.img and Kernel.img and apply to phone using following commands in windows command terminal with Phone in Fastboot&Rescue Mode (Hold Power and Volume Down)
fastboot flash system SYSTEM.img
fastboot flash kernel Kernel.img
4) Reboot phone with command fastboot reboot
5) Wipe DAVLIK User Space and cross my fingers it boots.
Click to expand...
Click to collapse
That didn't work so I reapplied TWRP and tried to apply the update.zip file and that did not work either. Having a hard time of things at this point just need to take a break for tonight.

So I'm getting an error message with the following when I try to update using the MHA-L29C636B368 (8.0.0.368) rom:
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update package from zip failed. Screenshot attached or link below:
https://photos.app.goo.gl/VGbh86ddthsU8kdt8
From what I've read in other forum post is that repairing the system partition can fix this. I used the Wipe>Advance Wipe [toggled "System"]>Repair or Change File System>Repair File System. I also tried to format the partition and again no change. I know the partition is not toggled read only and I even did that and reverted just to see if it was not presenting properly. Can't figure out what is going on here. Would really appreciate some advice. I rebooted into recovery after each attempt.
Thanks in Advance

So I followed the thread in this forum for how to downgrade back to nougat and now I have my phone running again. In the process of resetting the system and updating back to EMUI 8 now.