Related
Hi how to downgrade from B317 to B137? I need to reinstall B317 so have to downgrade first. I tried the transition pack B300 but saying failed. Is this transition pack only for B308? Any help?
317>300>137>308>317.
i guess it's failing due to root? What i've done:
stock recovery > 300 > 137
Not root, just normal update with sd card. I tried vol up vol down power force update as well, still saying failed.
ok here is the trick: (i got the same issue)
- put dload on your external sd-card.
- plug the sd-card-holder out of the phone
- do the 3-Buttons
- immediatly after the Huawei-logo disappears, plug the sd-card-holder into the phone.
It's really weired, but many users fixing the downgrade that way
kaasi said:
ok here is the trick: (i got the same issue)
- put dload on your external sd-card.
- plug the sd-card-holder out of the phone
- do the 3-Buttons
- immediatly after the Huawei-logo disappears, plug the sd-card-holder into the phone.
It's really weired, but many users fixing the downgrade that way
Click to expand...
Click to collapse
Thanks for your reply.
But still said "Huawei cust faild! Update_post_process fail!"
vhfyagi said:
Thanks for your reply.
But still said "Huawei cust faild! Update_post_process fail!"
Click to expand...
Click to collapse
I did a factory reset, it said "user reset failed!". Now stuck at huawei logo, system cannot boot. Help, please!
update: use vol up + power, then "wipe data/factory reset", now can boot. But still cannot roll back B317->B300, failed at 95%.
vhfyagi said:
I did a factory reset, it said "user reset failed!". Now stuck at huawei logo, system cannot boot. Help, please!
update: use vol up + power, then "wipe data/factory reset", now can boot. But still cannot roll back B317->B300, failed at 95%.
Click to expand...
Click to collapse
how do you try to rollback? Please describe step by step.
kaasi said:
how do you try to rollback? Please describe step by step.
Click to expand...
Click to collapse
1. create "dload" folder on sd-card, copy update.app (B300) into "dload"
2. run local updater or 3 button force update
I tried your trick as well, all attempts failed at 95%.
vhfyagi said:
1. create "dload" folder on sd-card, copy update.app (B300) into "dload"
2. run local updater or 3 button force update
I tried your trick as well, all attempts failed at 95%.
Click to expand...
Click to collapse
Do this:
- download B300 (maybe yours faulty) and fastboot.zip (including 5.1.1. recovery.img + boot.img package
- Now flash via fastboot the boot.img and also the recovery.img
- put the B300 "UPDATE.APP" into the "dload"-folder on your external sd-card
- plug out the sd-card
- vol up and down + power
- plug in the sd-card quickly after the huawei logo disappears
- ???
- profit!
kaasi said:
Do this:
- download B300 (maybe yours faulty) and fastboot.zip (including 5.1.1. recovery.img + boot.img package
- Now flash via fastboot the boot.img and also the recovery.img
- put the B300 "UPDATE.APP" into the "dload"-folder on your external sd-card
- plug out the sd-card
- vol up and down + power
- plug in the sd-card quickly after the huawei logo disappears
- ???
- profit!
Click to expand...
Click to collapse
Thanks. I am just reading old thread regarding the failure, before I attempt to do your suggestion, do I need to unlock the bootloader first?
yes, otherwise flashing via fastboot won't work. But you can first try the B300 i've mentioned without flashing boot.img and recovery.img.
kaasi said:
yes, otherwise flashing via fastboot won't work. But you can first try the B300 i've mentioned without flashing boot.img and recovery.img.
Click to expand...
Click to collapse
Thanks. Do you have a link for the driver utilities for unlocking the bootloader?
I am trying to follow http://mate7.net/ascend-mate7-bootloader-unlock/ but the link for the driver utilities are expired.
sorry i can not fing a valid mirror for the drivers ;(
kaasi said:
sorry i can not fing a valid mirror for the drivers ;(
Click to expand...
Click to collapse
I got the driver installed from HiSuite (Huawei phone management software) and successfully unlocked the bootloader.
Now I probably ready to try your suggestion. Just want to check with you if I got the command right:
---
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
---
I am quite new to root and flashing CWM recovery. Could you please explain what is "boot.img" and "recovery.img" so I know exactly what I am doing? Are they stock recovery?
My initial guess of the problem is my stock recovery may be damaged due to the factory reset on B317. Please correct me if I am wrong.
that's the correct syntax!
kaasi said:
that's the correct syntax!
Click to expand...
Click to collapse
I fastboot flashed the boot and recovery image, but the phone is keep rebooting every minute! And still same problem b300 cust fail at 95%.
After reading a number of thread related to cust fail for B300 transition pack, I decided to ignore B300 and go to B137 straight away. B137 update said failed at 90% but after reboot, surprise I am on B137! Motion control still missing. But I fixed it by rooting the device and modify the cust\ directory (accroding to http://forum.xda-developers.com/mate...-fail-t3078530, then I did wipe data/factory reset in stock recovery (no more cust fail), then flashed the B137 again, still failed at 90%, but after reboot, the motion control is back).
Now looks like I got everything back just like "out of box". I am not sure whether I will be getting 90% fail when B137->b308->B312. Haven't tried yet.
All solved, please see http://forum.xda-developers.com/showpost.php?p=62883777&postcount=55
Hi,
I have a mate 8 L29.
I was on "SimplyGoogle" B172 and wanted to go to KangVip B331.
I follow the OP instructions (at least i think...).
"Guide:
Search your bootloader unlock code, you'll need it later!
Download B321 from here (THX to ajsmsg78)
http://forum.xda-developers.com/show...php?p=66719078
Done
Extract update.app to sdcard/dload
Copy it to your PC! Use Huawei update extractor to extract boot, system, cust
Done
Remove your google account from yiur system!! Very important!!
Reboot to recovery
Full wipe including internal sd
Done...But here i think a made a BIG mistake...instead of wiping, i've done a format i think...
Flash the downloaded zip containing the update app.
Done
reboot to bootloader
flash boot cust system
Done
reboot and wait until chinese screen disappears."
Here, i get stuck with the message "Your device is booting now..."
I'm stuck here... I've try SwissKnife with the "unbrick" part...no result...tried to fastboot flash B170 version to get back to normal...No success.
Tried the 3 button with the dload on my sdcard....worked ones but get stuck at 5%. Since then, no access to it...
So now, i've no recovery...i can access to Erecovery, but i get this message "Getting package info failed"...
I can access fastboot too...but nothing else
Can someone help me please ?
Thanks in advance
Frank
I just fastboot flash the recovery for 4.1 and now i can access it... any clue why only this one ?
Now, when i try to flash any rom in twrp, it's stuck at "write radio image" and end with a "Unknown command [errno]"
Any clues ?
If you can help me to make my mate 8 functionnal again, i will be eternally gratefull !
same problem
tolimad said:
Hi,
I have a mate 8 L29.
I was on "SimplyGoogle" B172 and wanted to go to KangVip B331.
I follow the OP instructions (at least i think...).
"Guide:
Search your bootloader unlock code, you'll need it later!
Download B321 from here (THX to ajsmsg78)
http://forum.xda-developers.com/show...php?p=66719078
Done
Extract update.app to sdcard/dload
Copy it to your PC! Use Huawei update extractor to extract boot, system, cust
Done
Remove your google account from yiur system!! Very important!!
Reboot to recovery
Full wipe including internal sd
Done...But here i think a made a BIG mistake...instead of wiping, i've done a format i think...
Flash the downloaded zip containing the update app.
Done
reboot to bootloader
flash boot cust system
Done
reboot and wait until chinese screen disappears."
Here, i get stuck with the message "Your device is booting now..."
I'm stuck here... I've try SwissKnife with the "unbrick" part...no result...tried to fastboot flash B170 version to get back to normal...No success.
Tried the 3 button with the dload on my sdcard....worked ones but get stuck at 5%. Since then, no access to it...
So now, i've no recovery...i can access to Erecovery, but i get this message "Getting package info failed"...
I can access fastboot too...but nothing else
Can someone help me please ?
Thanks in advance
Frank
Click to expand...
Click to collapse
I have exactly the same problem, it never pass from "Your device is booting now..." , and exactly only the recovery fro 4.1 works (twrp and stock) if i instal any other recovery never works
I tried whit many roms, but anything works
I have a L09 from México
HELP :crying:
L29 - Unbrick
tolimad said:
I just fastboot flash the recovery for 4.1 and now i can access it... any clue why only this one ?
Now, when i try to flash any rom in twrp, it's stuck at "write radio image" and end with a "Unknown command [errno]"
Any clues ?
If you can help me to make my mate 8 functionnal again, i will be eternally gratefull !
Click to expand...
Click to collapse
You will need
1) Huawei Update Extractor ( please check the attachment)
2) SRK tools
3) B170 stock firmware.
4) B321 stock firmware (you need to extract files from this ) - check the below steps.
please check this thread https://forum.xda-developers.com/showpost.php?p=66776218&postcount=2 . It has everything.
Below are the steps from the above link - for L29 users. Please see below - I marked my comments in red for better understanding.
1. Start from stock B170 firmware with TWRP ready
2. Extract BOOT, CUST, RECOVERY, SYSTEM from B321 UPDATE.APP
3. Add firmware .zip file (which contains META-INF folder and UPDATE.APP) and place it into internal storage [ this is B170 zip just putting it in SDcard file ]
4. Make sure internal storage data is fully backed up
5. Delete All Accounts in Settings
6. Go to Recovery, Wipe Cache, Delvik Cache, Data, System
7. Flash that .zip file! (Getting errors is okay at this time) [This is what I didn't do before!] [ Flash that B170 zip file]
8. Boot straight to bootloader
9. fastboot flash boot, cust, and system [ this step is for flashing the extracted boot cust system from B321 ]
10. let it boot. Let it proceed with encryption process in chinese and fully boot into EMUI
11. NOW I'M AT EMUI 4.1!
12. Reboot to fastboot and fastboot flash insecure_boot and flash TWRP [this step - you can ask them why this is required ]
13. Reboot to recovery (TWRP) and then flash whatever rom you want to place in!
14. Enjoying it!
---------------------
Hope this works out for you. Don't forget to :good::good::good::good::good::good::good::good:
hi i just got a honor 6x and i have been following guides and at one point i had lineage os 13 on the phone but it would only boot to the password screen
so then i side loaded resurrection os 5.7 and it didnt have wifi so i tried upgrading emui and now i can't install any rom it just hangs at "patching ssytem unconditonally"
i have TWRP running on the phone. i just want to go back to stock OS. please help how do i do this?
unknown command [errno] update_huawei_pkg_from_ota_zip from zip failed
when i try to flash the stock huawei rom
i can run fastboot and twrp but nothing else works. i will paypal 15 dollars to someone who can help me
You can download the full firmware directly from honor, unzip it, and place the update.app file in a dload folder that you create on your sd card. Power of the phone then hold volume up, down, and power at the same time to initiate an automatic flash of the room you downloaded. This will erase everything, so be aware.
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Rommco05 said:
Which is your model number and which twrp u have installed?
Click to expand...
Click to collapse
l24 and twrp-3.1.1-0-berlin.img
siddhrsh said:
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Click to expand...
Click to collapse
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder then reboot your device using 3 button
Rommco05 said:
BLN-L24C567? If yes flash via twrp this two zips, after make reboot recovery in twrp. Should by now in stock recovery and here tap factory reset and after reboot. Now you will be hopefully in emui. Follow only if is correct your fw number which is mentioned here
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
Click to expand...
Click to collapse
by flash, you mean press the top left install button?
Rommco05 said:
Yes, download them and put to sdcard or inter memory. Flash first region and after update zip
Click to expand...
Click to collapse
The region flashes sucessfully but update.zup fails on '32k crc check'
Rommco05 said:
Any news juicyapply ?
Click to expand...
Click to collapse
update_huawei_pkg_from_ota_zip: update pcakage from zip failed
updater process ended with ERROR: ?
Errror installinc zip file '/sdcard/update.zip'
3.1.0-2 is the twrp version
it just says your device is booting now forever
i put it on stock recovery, i can put it back on twrp though
juicyapply said:
i put it on stock recovery, i can put it back on twrp though
Click to expand...
Click to collapse
No, just do a reset in stock recovery.
venugopalu007 said:
No, just do a reset in stock recovery.
Click to expand...
Click to collapse
it doesn't boot to stock recovery, even when i hold down volume and power buttons
i got the recovery using the extractor using huawei
oh my god ok now it is stuck at blue honor screen for an hour after update installed automatically without pressing anything. i just pressed volume and power buttons and it started updating. no menu was provided
now it says your device failed verificitaion
so now the bootloader is locked again and the update installed, but it still doesn't boot and when i try to update again it says verification failed
juicyapply said:
now it says your device failed verificitaion
Click to expand...
Click to collapse
I had the same problem once.
You can try to flash the cust partition of your phone. The "device verification failed"-message should disappear then. It's not enough to only flash boot, system and recovery. If there is a problem with the cust partition of your phone you can also have problems with flashing stock roms via "dload"-method.
1. Download the right stock firmware via the huawei firmware finder. You usually have two .zip files (e.g. update.zip & update_full_BLN-L21_hw_eu.zip). The image file for the cust partition can be found in the update_full_BLN-L21_hw_eu.zip (choose the right one for your model).
2. Unpack update_full_BLN-L21_hw_eu.zip and extract the cust partition with the huawei firmware extractor.
3. Put your phone into fastboot mode
4. Use the following command: fastboot flash cust cust.img
5. Try to boot into your stock rom.
I have totally failed to rebrand my FRD-AL10 (EMUI 5, Nougat) to FRD-L19 (because I was hoping to get rid of all the apps/functions/messages in Chinese) by following the steps listed on another thread.
I did eventually manage to get it to identify as FRD-L19 but when it did boot up it had no stock keyboard only voice commands and the phone was unusable . it said it was Android 7, model FRD-L19 and build number was nrd90m test keys?
I tried to update with the latest FRD-L19 update.app by copying it into the dload and vol up+vol down +power buttons press but the update failed and since then I am stuck with the phone refusing to boot, or to boot into twrp recovery.
It hangs at the booting now orange letters screen (It says "Your device is booting now...." and nothing more happens.
If I hold vol up and power up, it hangs at "Your device is booting now...."
If I wait until it says I can press vol up for Erecovery it goes into Huawei erecovery and that tries to download latest version update by wifi, it connects to wifi but says "Getting package info failed".
If I go to reboot from erecovery it goes back to the Your device is booting now.... and stops.
I can shutdown from erecovery (but if its still plugged in it goes straight back to "Your device is booting now...")
From shutdown (and unplugged from USB) - if I hold vol up+ vol down + power it goes to EMUI Installing update then Software Install failed. The update package does not exist. Please download the package again. Reboot system now.
I don't know how to put an alternative update package into dload when I can only use fastboot mode and nothing else?
I can do that by shutting it own from erecovery shut down page and holding down volume and power up.
I assume I need to go back to stock firmware for FRD-AL10 like this one from another thread FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP
and not version 7.0 stock rom for FLD-L19???
Anyway, I unzipped that and use Huawei extractor tool to extract Boot.img, cust.img, recovery.img and sys.img as suggested on this thread.
I can fastboot flash 3 of those but the cust.img fails to flash with "partition error"
I also tried to fastboot format user data but the command failed FAILED (remote: Command not allowed)
I don't think its possible to use the unbrick function of huawei multitool because I can't get into recovery mode?
I don't think I can get a different copy of update.app file into the dload folder internal memory and use the vol up+ vol down +power buttons because I can no longer get the phone to boot to system.
The fastboot screen says PHONE Unlocked
FRP Unlock
Would be very grateful for suggestions on what I should be doing to unbrick this, please. Sorry for being a stupid newbie.... and I honestly have been reading these threads day and night for 2 days but am still stuck!!
Thanks
Edit: is part of the answer to try to flash a different version of twrp again? So I have to put the right version of twrp.img into my adb folder and then fastboot flash recovery twrp*****.img ? Then I might be able to fastboot boot recovery ? Or if twrp works I can flash the right stock rom? (which one? given I was trying to rebrand)
Or if I could somehow get back system to boot, I could use adb push to put the correct update.app into dload on internal memory and use the vol up+ vol down +power???
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Rommco05 said:
Is better following venugopalu method
Click to expand...
Click to collapse
Yes , becasue my zip contains oem restore if the devcie dont have oem it will restore and successfully restore the device
venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks
venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
I have got that far.
Then do I fastboot reboot?
and hope it boots to system so I can copy over the zip file from my pc with file explorer and then
do I adb reboot recovery (to get into twrp)?
then install the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip file using twrp? (or do you mean another method of installing that rom)?
then still in twrp I do Wipe: format user data?
then do I reboot to system?
At what point do I need to copy the update.app to sdcard\dload and use the vol up+ vol down + power to install the update?
Thanks again
Agatha_honor 8 said:
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks
Click to expand...
Click to collapse
After twrp sucess you have to biot the device it will works normal but you have to go reboot to recovery and do a factory wipe and shutdown then after doebload the official firmware of frd19 which is mm and dlaod the update.app and three buttons trick it will update and relock the bootloader and update to EMUI 5 by the phone updater app in settings
I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?
Agatha_honor 8 said:
I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?
Click to expand...
Click to collapse
bro neglet the mount issues after update.app write sucess reboot the phone once and let it boot comoletly .after that dload the offical ROM of frd l19 . and do a reset in stock recovery.
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
No bro not needed , enjoy the device .
Add the fixed tag to the thread.:highfive:
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
Bro but i will suggest you to from marshmallow go directly to the new update of nougat using firmware finder because, the update from b360 is stopped, sh!t huawei server stopped the update idk y , many people also stucked in b360 , so my idea is just go to latest update in firmware finder from marshmallow.
Any help just reply.
If you got another update from b360 just neglet my above steps and go on . Enjoy.
It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!
Agatha_honor 8 said:
It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!
Click to expand...
Click to collapse
Flash this first update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
If after flashing reboot got strucked in blue screen just format factory resey in recovery.
I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??
Agatha_honor 8 said:
I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??
Click to expand...
Click to collapse
Strange
So just update to nougat via system app , later try to flash the zips through twrp and give atry
Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '
Agatha_honor 8 said:
Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '
Click to expand...
Click to collapse
The problem is in b392 they are not flashable , decrease the version try all because idk y the zips are not flashing , in my version frdl02 they are flashed successfully without any issue.
Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
I Need This Firmware Plz FRD-L19432B360
I Tried To Find Full Package But Could Not Find
I Need Help Plz
Thanks Anticipation
The issue I am having is that my honor 8 (FRD-L14) is stuck on "your device is booting now.." and it does not shut down. If I hold the power button until it shuts down then it restarts by itself and it keep doing the same thing over and over.
When it first starts and the blue screen and the logo come up the phone vibrate twice and then it displays "your device is booting now..." and it gets stuck there
Here is what I can and cant do:
I can go into fastboot and it shows that the phone is unlocked and the FRP is unlocked
I can flash TWRP from there and I can go into TWRP
When I check in TWRP for partitions I can see CUST or DATA and it shows that the INTERNAL STORAGE size is ZERO
I was able to create the system partition but I am not sure if I did it right.
the dload folder on the SD Card has the role back but the three finger thing (vol+ and vol- and power does not start the system restore from update.app) instead it gets stuck on " your device is booting now..."
I tried Huawei_Multi-Tool and I chose the "unbrick option"...I extracted system.img, boot.img, recovery.img and cust.img and the tool was able to push all images to the device but still the device does not start.
The original stock recovery is not accessible either even if I flash the stock recovery image from TWRP
Any tips on how to resolve this?
Thanks in advance guys
fidzi_1981 said:
The issue I am having is that my honor 8 (FRD-L14) is stuck on "your device is booting now.." and it does not shut down. If I hold the power button until it shuts down then it restarts by itself and it keep doing the same thing over and over.
When it first starts and the blue screen and the logo come up the phone vibrate twice and then it displays "your device is booting now..." and it gets stuck there
Here is what I can and cant do:
I can go into fastboot and it shows that the phone is unlocked and the FRP is unlocked
I can flash TWRP from there and I can go into TWRP
When I check in TWRP for partitions I can see CUST or DATA and it shows that the INTERNAL STORAGE size is ZERO
I was able to create the system partition but I am not sure if I did it right.
the dload folder on the SD Card has the role back but the three finger thing (vol+ and vol- and power does not start the system restore from update.app) instead it gets stuck on " your device is booting now..."
I tried Huawei_Multi-Tool and I chose the "unbrick option"...I extracted system.img, boot.img, recovery.img and cust.img and the tool was able to push all images to the device but still the device does not start.
The original stock recovery is not accessible either even if I flash the stock recovery image from TWRP
Any tips on how to resolve this?
Thanks in advance guys
Click to expand...
Click to collapse
You said you can go into TWRP right. Just rebrand the device to L19 :angel:
First format data
Then flash the rebrand.zip
Then reboot and if it doesn't boot first go into recovery and factory reset then let it boot up again.
Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?
wasiq224 said:
Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?
Click to expand...
Click to collapse
He said he tried to enter recovery with no luck, and he also tried the 3 button dload method.
wasiq224 said:
Try flashing stock recovery.img using fastboot. Can you now enter into the 3-button combination mode?
Click to expand...
Click to collapse
I tried flashing the stock recovery but it does not work. I also tried the 3-buttons and it did not work either
when I go into TWRP it shows that the size of the internal storage is ZERO
damenbm said:
You said you can go into TWRP right. Just rebrand the device to L19 :angel:
First format data
Then flash the rebrand.zip
Then reboot and if it doesn't boot first go into recovery and factory reset then let it boot up again.
Click to expand...
Click to collapse
Where can I find the rebrand.zip file?
Here are the full instructions :victory:
https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
damenbm said:
Here are the full instructions :victory:
https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thanks. I will give it a try and flash it and see if it can re-create the missing partitions :fingers-crossed::fingers-crossed:
fidzi_1981 said:
Thanks. I will give it a try and flash it and see if it can re-create the missing partitions :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Best of luck :angel: let me know how it goes please!
damenbm said:
He said he tried to enter recovery with no luck, and he also tried the 3 button dload method.
Click to expand...
Click to collapse
Yes, but he tried the dload method before flashing stock recovery, and he was flashing stock recovery using twrp rather than fastboot.
Thanks but I tried dload after I flashed the stock recovery.
And I tried flashing the stock recovery using facebook and twrp and neither ways succeeded
fidzi_1981 said:
Thanks but I tried dload after I flashed the stock recovery.
And I tried flashing the stock recovery using facebook and twrp and neither ways succeeded
Click to expand...
Click to collapse
Did the rebrand work? Did it make you go back to stock?
damenbm said:
Did the rebrand work? Did it make you go back to stock?
Click to expand...
Click to collapse
Not yet. I'm at work. I'll give it a go tonight
For me it worked after trying to get my FRD-L09 back to work again after I couldnt flash system and not boot anywhere but twrp.
Thanks for the help!
fidzi_1981 said:
Not yet. I'm at work. I'll give it a go tonight
Click to expand...
Click to collapse
I had the same exact issue 5 days ago.
Here's what I did to solve it
NOTE - This is FRD-L14 SPECIFIC
First, Download these files -
1) FRD-L04 Original Recoveries and Boot Image
2) FRD-04 Rollback Package from Huawei
3) FRD-L04 Official MM ROM from Huawei
4) FRD-L14 Specific Stock MM ROM Update.zip
Assuming Bootloader is unlocked
Here's what you should do
-Unzip the Recoveries and Boot image folder
-Unzip Rollback Package
-Make a folder called "dload" (without the quotes) in the root of your SD Card
-Place the Update.app from the Rollback Package in there
-Make sure you have ADB and Fastboot installed - Installer
-Boot into fastboot by Plugging in your USB Cable and Holding Power + Volume Down. This may take multiple tries and multiple reboots to get it right depending on the reboot loop.
-Once phone is in Fastboot, go into the Recoveries and Boot folder, hold Shift and right Click. Click on open Command Window Here.
-If the option says "Powershell" instead, open Command prompt manually, and cd to that directory, or change this option in your settings.
-With command prompt open, do -
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash recovery2 recovery2.img
Code:
fastboot flash boot boot.img
IMPORTANT - Make sure you unplug the cable from the phone and are ready to press both volume buttons at the same time after it reboots
If you dont get it the first time,hold all 3 buttons at the same time to make it reboot and go into that mode.
Code:
fastboot reboot
-Remove cable, press both Buttons at the same time
-It should go into stock recovery and start flashing the Rollback package
-Wait for it to finish, it should reboot automatically
-After it reboots, you should notice that it went back to the same state it was, so reboot into fastboot and flash recovery, recovery2, and the boot image again.
-This time, put the Update.app from the Official L04 Rom you downloaded from the Huawei website in the "dload" folder of the SDCard
-Fastboot Reboot, Remove cable, and Press buttons again. This time it will flash the Official ROM, so it will take longer.
-If it says error right at 99%, reboot, it flashed correctly but it displays an error.
-If it says error anytime before the end of flash, reboot and try again.-After it reboots, you will notice you are able to boot again. BUT, you are not able to update due to it being branded as L04, sooooo
-Place the Update.app from the 4th link (L14 Specific ROM) in the "dload" folder of SD Card
-Three button method into the recovery flash again.
-It will start to flash the L14 Specific ROM on top of the L04 one.
-After it flashes it and reboots, reboot one more time once you are inside android so it encrypts the ROM.
-(Optional) Update to Nougat, apply other updates after that (There's like 3 Updates I think)
-At this point you have a 100% Stock FRD-L14 Honor 8 but, you can also
-(Optional) Reunlock Bootloader
-Profit?
JvaOneShotzXprX said:
I had the same exact issue 5 days ago.
Here's what I did to solve it
NOTE - This is FRD-L14 SPECIFIC
First, Download these files -
1) FRD-L04 Original Recoveries and Boot Image
2) FRD-04 Rollback Package from Huawei
3) FRD-L04 Official MM ROM from Huawei
4) FRD-L14 Specific Stock MM ROM Update.zip
Assuming Bootloader is unlocked
Here's what you should do
-Unzip the Recoveries and Boot image folder
-Unzip Rollback Package
-Make a folder called "dload" (without the quotes) in the root of your SD Card
-Place the Update.app from the Rollback Package in there
-Make sure you have ADB and Fastboot installed - Installer
-Boot into fastboot by Plugging in your USB Cable and Holding Power + Volume Down. This may take multiple tries and multiple reboots to get it right depending on the reboot loop.
-Once phone is in Fastboot, go into the Recoveries and Boot folder, hold Shift and right Click. Click on open Command Window Here.
-If the option says "Powershell" instead, open Command prompt manually, and cd to that directory, or change this option in your settings.
-With command prompt open, do -
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash recovery2 recovery2.img
Code:
fastboot flash boot boot.img
IMPORTANT - Make sure you unplug the cable from the phone and are ready to press both volume buttons at the same time after it reboots
If you dont get it the first time,hold all 3 buttons at the same time to make it reboot and go into that mode.
Code:
fastboot reboot
-Remove cable, press both Buttons at the same time
-It should go into stock recovery and start flashing the Rollback package
-Wait for it to finish, it should reboot automatically
-After it reboots, you should notice that it went back to the same state it was, so reboot into fastboot and flash recovery, recovery2, and the boot image again.
-This time, put the Update.app from the Official L04 Rom you downloaded from the Huawei website in the "dload" folder of the SDCard
-Fastboot Reboot, Remove cable, and Press buttons again. This time it will flash the Official ROM, so it will take longer.
-If it says error right at 99%, reboot, it flashed correctly but it displays an error.
-If it says error anytime before the end of flash, reboot and try again.-After it reboots, you will notice you are able to boot again. BUT, you are not able to update due to it being branded as L04, sooooo
-Place the Update.app from the 4th link (L14 Specific ROM) in the "dload" folder of SD Card
-Three button method into the recovery flash again.
-It will start to flash the L14 Specific ROM on top of the L04 one.
-After it flashes it and reboots, reboot one more time once you are inside android so it encrypts the ROM.
-(Optional) Update to Nougat, apply other updates after that (There's like 3 Updates I think)
-At this point you have a 100% Stock FRD-L14 Honor 8 but, you can also
-(Optional) Reunlock Bootloader
-Profit?
Click to expand...
Click to collapse
Thanks! i will give this a try since flashing the rebranding zip file that was suggested in one of the posts did not work out for me.
However, do you think that this w=method will work despite the fact that I do not have a valid DATA or CUST partitions?
Thanks again for responding to my post!!
fidzi_1981 said:
Thanks! i will give this a try since flashing the rebranding zip file that was suggested in one of the posts did not work out for me.
However, do you think that this w=method will work despite the fact that I do not have a valid DATA or CUST partitions?
Thanks again for responding to my post!!
Click to expand...
Click to collapse
No problem!
That shouldn't matter, this will get you to 100% stock, so all of those partitions will be reflashed.
JvaOneShotzXprX said:
No problem!
That shouldn't matter, this will get you to 100% stock, so all of those partitions will be reflashed.
Click to expand...
Click to collapse
It worked!!!
Thanks a lot!
but this is what happened:
After i flashed recovery, recovery2 and boot images, I rebooted the phone and it went straight to stock recovery and it asked me download stock firmware and stock recovery which was 1.66GB so I allowed and it downloaded it and flashed everything and did a reset and the phone booted normally.
The stock firmware that it downloaded and flashed was B122 MM.
One question though, does the flashing sequence of the recovery, recovery2 and boot matter?
Before you posted your post, I had tried flashing these three files in the following order: boot, then recovery then recovery2 but it never worked.
Also, the three images that tried to flash were extracted from the update.app from this firmware (FRD-L14C567B162_FULL) so I was not sure what was going wrong.
Thanks again for your help!! :victory::good::highfive:
fidzi_1981 said:
It worked!!!
Thanks a lot!
but this is what happened:
After i flashed recovery, recovery2 and boot images, I rebooted the phone and it went straight to stock recovery and it asked me download stock firmware and stock recovery which was 1.66GB so I allowed and it downloaded it and flashed everything and did a reset and the phone booted normally.
The stock firmware that it downloaded and flashed was B122 MM.
One question though, does the flashing sequence of the recovery, recovery2 and boot matter?
Before you posted your post, I had tried flashing these three files in the following order: boot, then recovery then recovery2 but it never worked.
Also, the three images that tried to flash were extracted from the update.app from this firmware (FRD-L14C567B162_FULL) so I was not sure what was going wrong.
Thanks again for your help!! :victory::good::highfive:
Click to expand...
Click to collapse
It shouldn't matter, but I included it because sometimes those get corrupted like what happened to me. I'll probably be testing it out completely and making a guide. Looks like you had it better than I did though! I'm glad you got it fixed! :highfive:
JvaOneShotzXprX said:
It shouldn't matter, but I included it because sometimes those get corrupted like what happened to me. I'll probably be testing it out completely and making a guide. Looks like you had it better than I did though! I'm glad you got it fixed! :highfive:
Click to expand...
Click to collapse
Thanks for the help again. I would not have been able to rescue the phone without your tips. :good::highfive: