Database Info

Huawei P9 Brick( The easiest way to unbrick)

1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing

Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.

XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1

problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?

To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.

Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.

Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408

phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever

nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.

Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...

I want to android 6.0 as twrp. How ? Pls

That is only for unlocked bootloader??

Link in Step 12 for Nougat s broken

JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!

I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!

Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers

Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You

mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?

zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?

mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

I tried upgrading to 8 beta version and now I got this

"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?

evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
I can enter recovery via volume up and down with power button...pressing them all together. But the partitions don't seem to exist. I can't wipe nor install update zips. Help ? PLEASE

evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
Tell me your model no and bootloader is lock or unlock

siddhrsh said:
Tell me your model no and bootloader is lock or unlock
Click to expand...
Click to collapse
I was BLN-L22C675B340 then rebranded to CHINESE version and then tried to restore the oeminfo to And I'm back to BLN-L22C675B340. Unlocked . I can't access to TWRP recovery now, idk what happened

I also tired flashing TWRP through recovery_ramdisk
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help ?

evjgl said:
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help
Click to expand...
Click to collapse
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first

There are many different recovery images in it
I have three for recovery. Recovery_ramdis.img recovery_vendor.img and recovery_vbmeta.img
Also recovery2 images which one should I use?

BLN-L22C675B340 update zip (update app package) doesn't work? Why b360? I'll Google and download it right away then

It's stuck there
I flashed the Oreo recovery and used sd update method with the folder close and the update.app from BLN-L22C675B340 but that's all I get. I can't boot into the recovery...only plugging the USB + volume up&down button and power on...but instead of emui update, it shows something like and USB cable...if I stick the USB cable it gets stuck in 5% and does nothing...if I remove it and install it says software install failed

Still not working
siddhrsh said:
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first
Click to expand...
Click to collapse
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked

evjgl said:
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked
Click to expand...
Click to collapse
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method

siddhrsh said:
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method
Click to expand...
Click to collapse
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.

evjgl said:
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.
Click to expand...
Click to collapse
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder

siddhrsh said:
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder
Click to expand...
Click to collapse
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works

evjgl said:
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works
Click to expand...
Click to collapse
Wipe all partition and then try thishttps://forum.xda-developers.com/honor-6x/how-to/guide-procedure-to-install-update-t3793407

It sort of worked
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation

Thank you
evjgl said:
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation
Click to expand...
Click to collapse
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day

evjgl said:
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day
Click to expand...
Click to collapse
Hit like button

eRecovery stops at 5% - Bricked?

Hi guys,
so i just had my Honor 8 on Android 7 (EMUI 5.0?) rooted and unlocked but wanted to unroot and relock. I used a tutorial for that but i think i made a mistake.
Now I stuck on the honor 8 bootscreen. I can enter fastmode and the recovery but my battery is always low.
I used the rollback package but it didnt install. Also a factory reset from the stock recovery doesnt work.
I also tried a method from here where you flash the cust.img boot.img recovery.img and the system.img from the stock an then flash the Update.app via eRecovery but this also didnt work. It stucks at 5% and does nothing. I am also not able to get to the eRecovery without pluging in the usb into the pc.
Is there any possibility to save my honor? Data's all saved.
I tried it with the rollback package, the B101 and B131 i think.
Thanks,
Musti

Hello, what is your Honor 8 model number? (L04/L09/L19/etc.)

Sorry, FRD-L09

Musti222 said:
Sorry, FRD-L09
Click to expand...
Click to collapse
What you can do is to try to flash firmware via TWRP.
Follow this guide (use "FRD-L09" link ofc...): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
And after TWRP flash, you should flash this firmware (L09 link instead of L19 link of the guide) via dload folder method: FRD-L09C432B131
If you need help to find TWRP version, see my post : here

Do the method where you flash cust.img system.img etc but this time you boot into recovery and factory reset, then just boot, i do this everytime

Help unbricking Honor 6x L-24

Model: BLN L-24
I am stuck in error mode with
Func NO: 11 (recovery image)
Error NO: 2 (failed load!)
I have tried to re-flash several custom recovery I have used in the past, however none seem to work and end with the same result.
I have also tried flashing the stock recovery2.img from the Update.app for my model, but that also doesn't work and ends with a FAILED (remote: Partition Error)
I have run into troubles before, but I'm stumped with this one, I can at least still boot into fastboot.
Any help would be appreciated.

Hyperweasle said:
Model: BLN L-24
I am stuck in error mode with
Func NO: 11 (recovery image)
Error NO: 2 (failed load!)
I have tried to re-flash several custom recovery I have used in the past, however none seem to work and end with the same result.
I have also tried flashing the stock recovery2.img from the Update.app for my model, but that also doesn't work and ends with a FAILED (remote: Partition Error)
I have run into troubles before, but I'm stumped with this one, I can at least still boot into fastboot.
Any help would be appreciated.
Click to expand...
Click to collapse
What's your Android version. What were you trying to do. What recoveries have you tried and what's the command you're using. I had the same error yesterday because I flashed wrong TWRP. Fixed it by reflashing correct image.

Mannan Qamar said:
What's your Android version. What were you trying to do. What recoveries have you tried and what's the command you're using. I had the same error yesterday because I flashed wrong TWRP. Fixed it by reflashing correct image.
Click to expand...
Click to collapse
The version was Android 8 Oreo
I started out trying to go back to EMUI 8.0 from Open Kirin RROS Beta 2. So I followed this guide https://forum.xda-developers.com/honor-6x/how-to/update-bln-l22c675-emui-5-x-x-to-emui-8-t3819317
I tried the TWRP from download in the guide that was in the HWOTA8_BLN folder along with the TWRP from here https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
The command I was using to flash the recoveries I believe is correct also which is the fastboot flash recovery_ramdisk "name of image" command. That command will flash successfully with the custom recoveries, however it will still bring up the error mode despite pressing +vol button.
The stock recoveries I extracted from the update.app file, I downloaded from here: https://pro-teammt.ru/firmware-database/?firmware_model=bln-L24&firmware_page=0. Which are the stock recoveries that end up with the FAILED (remote: Partition Error) Message.

Hyperweasle said:
The version was Android 8 Oreo
I started out trying to go back to EMUI 8.0 from Open Kirin RROS Beta 2. So I followed this guide https://forum.xda-developers.com/honor-6x/how-to/update-bln-l22c675-emui-5-x-x-to-emui-8-t3819317
I tried the TWRP from download in the guide that was in the HWOTA8_BLN folder along with the TWRP from here https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
The command I was using to flash the recoveries I believe is correct also which is the fastboot flash recovery_ramdisk "name of image" command. That command will flash successfully with the custom recoveries, however it will still bring up the error mode despite pressing +vol button.
The stock recoveries I extracted from the update.app file, I downloaded from here: https://pro-teammt.ru/firmware-database/?firmware_model=bln-L24&firmware_page=0. Which are the stock recoveries that end up with the FAILED (remote: Partition Error) Message.
Click to expand...
Click to collapse
You tried to use HWOTA 8 to go back to stock? Dude. Use Hurupdater. Now, to fix. First of all search XDA for TWRP for hi6250. You can use Elemental but try this one first. Flash it via PowerShell. Does that give any errors? Now once it's flashed, don't reboot. Disconnect phone from PC and hold Volume Up and Power button simultaneously. You should boot into TWRP. What does bootloader say. Phone Locked or Unlocked? What about FRP? The stock recovery didn't work cause you used the BLN-L24 one which is for EMUI 5. You're on EMUI 8. Try to boot into TWRP

Mannan Qamar said:
You tried to use HWOTA 8 to go back to stock? Dude. Use Hurupdater. Now, to fix. First of all search XDA for TWRP for hi6250. You can use Elemental but try this one first. Flash it via PowerShell. Does that give any errors? Now once it's flashed, don't reboot. Disconnect phone from PC and hold Volume Up and Power button simultaneously. You should boot into TWRP. What does bootloader say. Phone Locked or Unlocked? What about FRP? The stock recovery didn't work cause you used the BLN-L24 one which is for EMUI 5. You're on EMUI 8. Try to boot into TWRP
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked

Hyperweasle said:
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked
Click to expand...
Click to collapse
Use Huawei multi tool 8 to unbrick your device it's easier and just use the firmware that you were in before

Hyperweasle said:
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked
Click to expand...
Click to collapse
Try Dload

hamid1999 said:
Use Huawei multi tool 8 to unbrick your device it's easier and just use the firmware that you were in before
Click to expand...
Click to collapse
Mannan Qamar said:
Try Dload
Click to expand...
Click to collapse
I tried both of those things and still couldn't get it working.
dload doesn't pop up and multi tool fails to flash the recovery_ramdisk.img when trying to unbrick it.
I do remember before any of this happened that I was having a problem with my internal storage as I didn't have access to it. All file mangers I tried couldn't access it and showed it up as blank and TWRP showed it with 0mb.
I have a feeling that my internal storage is screwed up and that's why all attempt to flash anything have failed. I may just have face the fact that it's dead.

Hyperweasle said:
I tried both of those things and still couldn't get it working.
dload doesn't pop up and multi tool fails to flash the recovery_ramdisk.img when trying to unbrick it.
I do remember before any of this happened that I was having a problem with my internal storage as I didn't have access to it. All file mangers I tried couldn't access it and showed it up as blank and TWRP showed it with 0mb.
I have a feeling that my internal storage is screwed up and that's why all attempt to flash anything have failed. I may just have face the fact that it's dead.
Click to expand...
Click to collapse
As long as it turns on it isn't dead. Did you try DC unlocker? That often works. Try it and if it fails go to service center and play dumb. Say it happened like this after a update.
Edit. Let it power off. When it turns on hold Volume Up

Stuck with fastboot mode.

Ok, so I had oreo in my 6x indian variant, and wanted to flash elemental OS V8. But for some reason the TWRP was not able to access the data partition. And when I read somewhere in XDA (in other device's forum) that changing the file system from f2fs to ext4 can help and did so and it worked. I could access my internal storage and everything on TWRP. But I didn't change the file system back to f2fs and sideloaded the elemental 8. It worked find and I installed it. When rebooting it got into bootloop. After that I tried to get into the TWRP but didn't work. I flashed the TWRP again which said flashed OK, but when I tried to enter it took me to the stock recovery. When I tried the dload method with the nougat B360 version, it gave me blank screen with red led blinking and nothing working after that. I tried dload with the oreo file which gave me back the stock recovery and erecovery, but again flashing TWRP didn't work. After dload, it reboots to erecovery and asks me to wipe data partition since it is severely corrupt but says factory reset failed. In some cases it does go factory reset but doesn't boot into OS. Since I do not have access to TWRP I am not able to bring it back. I had got into this situations before but the dload always worked. Maybe now it isn't because I am on Oreo and the partitions are different from Nougat? I also tried formatting/erasing partitions from fastboot but gives me error/ remote command not allowed. I also tried Multi-Tool8 and used the unbrick option. but doesn't work it gives me all flashed, and when i flash the oreo files gives me all flashed Error#1, Complete, Something went wrong and bootloops again or gives me blank screens.
I have attached a screenshot of my device info. If anyone could help me breath life into it.

casperskie said:
Ok, so I had oreo in my 6x indian variant, and wanted to flash elemental OS V8. But for some reason the TWRP was not able to access the data partition. And when I read somewhere in XDA (in other device's forum) that changing the file system from f2fs to ext4 can help and did so and it worked. I could access my internal storage and everything on TWRP. But I didn't change the file system back to f2fs and sideloaded the elemental 8. It worked find and I installed it. When rebooting it got into bootloop. After that I tried to get into the TWRP but didn't work. I flashed the TWRP again which said flashed OK, but when I tried to enter it took me to the stock recovery. When I tried the dload method with the nougat B360 version, it gave me blank screen with red led blinking and nothing working after that. I tried dload with the oreo file which gave me back the stock recovery and erecovery, but again flashing TWRP didn't work. After dload, it reboots to erecovery and asks me to wipe data partition since it is severely corrupt but says factory reset failed. In some cases it does go factory reset but doesn't boot into OS. Since I do not have access to TWRP I am not able to bring it back. I had got into this situations before but the dload always worked. Maybe now it isn't because I am on Oreo and the partitions are different from Nougat? I also tried formatting/erasing partitions from fastboot but gives me error/ remote command not allowed. I also tried Multi-Tool8 and used the unbrick option. but doesn't work it gives me all flashed, and when i flash the oreo files gives me all flashed Error#1, Complete, Something went wrong and bootloops again or gives me blank screens.
I have attached a screenshot of my device info. If anyone could help me breath life into it.
Click to expand...
Click to collapse
What command you use to flash TWRP? And what image are you trying to flash? Try this. In Fastboot flash RECOVERY-V2.img (Elemental ROM TWRP) via command.
fastboot flash recovery_ramdisk RECOVERY-V2.img
After it's flashed, press and Hold Power and Volume Up till you see Honor logo then let go. It Should boot to TWRP. If not then extract the Uodate.zip (the large one) and you will get Update.app and using Huawei Update Extractor extract System.img, Ramdisk.img and Recovery_ramdisk.img then boot phone to fastboot and flash them manually as
fastboot flash boot boot.img
fastboot flash recovery_ramdisk Recovery_ramdis.img
And,
fastboot flash system system.img
This should work. It's a boot error.

I was in same mode in fastboot when i updated to Oreo and it was b340 which saved me from this via dload. You give it a try.
You may not be able to flash twrp now as your BL me be locked after dload.

Mannan Qamar said:
What command you use to flash TWRP? And what image are you trying to flash? Try this. In Fastboot flash RECOVERY-V2.img (Elemental ROM TWRP) via command.
fastboot flash recovery_ramdisk RECOVERY-V2.img
After it's flashed, press and Hold Power and Volume Up till you see Honor logo then let go. It Should boot to TWRP. If not then extract the Uodate.zip (the large one) and you will get Update.app and using Huawei Update Extractor extract System.img, Ramdisk.img and Recovery_ramdisk.img then boot phone to fastboot and flash them manually as
fastboot flash boot boot.img
fastboot flash recovery_ramdisk Recovery_ramdis.img
And,
fastboot flash system system.img
This should work. It's a boot error.
Click to expand...
Click to collapse
I did try that but from the unbrick option from Multi-Tool. And also there are two recovery images in the UPDATE.APP and I don't know which one to flash. When I tried from the Multi-Tool, it says you're trying to flash the wrong image. Also I think the boot partition in oreo is ramdisk? I am not sure... because there is no boot image in the unbrick option. Although I didn't try flashing them individually. I will try it and let you know. Thanks.

shashank1320 said:
I was in same mode in fastboot when i updated to Oreo and it was b340 which saved me from this via dload. You give it a try.
You may not be able to flash twrp now as your BL me be locked after dload.
Click to expand...
Click to collapse
I actually relocked and unlocked the bootloader again, just to be sure. But will try the B340 one, didn't try that. Thanks for the links will check them out

casperskie said:
I did try that but from the unbrick option from Multi-Tool. And also there are two recovery images in the UPDATE.APP and I don't know which one to flash. When I tried from the Multi-Tool, it says you're trying to flash the wrong image. Also I think the boot partition in oreo is ramdisk? I am not sure... because there is no boot image in the unbrick option. Although I didn't try flashing them individually. I will try it and let you know. Thanks.
Click to expand...
Click to collapse
Yes, boot is ramdisk in oreo and recovery is ramdisk_recovery.

shashank1320 said:
I was in same mode in fastboot when i updated to Oreo and it was b340 which saved me from this via dload. You give it a try.
You may not be able to flash twrp now as your BL me be locked after dload.
Click to expand...
Click to collapse
So the B340 dload didn't work for me. Gives the same results. Always boots into erecovery and then fails to factory reset. Also the phone doesn't get switched on or boot into recovery without connecting to the USB. Only when it is connected it works, that too after 5-10 mins after I press the Power button or the Recovery key combination. And I used a 4GB memory card, could this be the reason the dload didn't work?

casperskie said:
So the B340 dload didn't work for me. Gives the same results. Always boots into erecovery and then fails to factory reset. Also the phone doesn't get switched on or boot into recovery without connecting to the USB. Only when it is connected it works, that too after 5-10 mins after I press the Power button or the Recovery key combination. And I used a 4GB memory card, could this be the reason the dload didn't work?
Click to expand...
Click to collapse
You may need 8 GB SD card if you have or can borrow and see if that helps. Whats the size of update.app file?

casperskie said:
I did try that but from the unbrick option from Multi-Tool. And also there are two recovery images in the UPDATE.APP and I don't know which one to flash. When I tried from the Multi-Tool, it says you're trying to flash the wrong image. Also I think the boot partition in oreo is ramdisk? I am not sure... because there is no boot image in the unbrick option. Although I didn't try flashing them individually. I will try it and let you know. Thanks.
Click to expand...
Click to collapse
Nope flashing the files individually also doesn't work. it's all the same.

shashank1320 said:
You may need 8 GB SD card if you have or can borrow and see if that helps. Whats the size of update.app file?
Click to expand...
Click to collapse
Something around 3.3 GB. There's only some 250mb left in the card when I copy the update.app

casperskie said:
Something around 3.3 GB. There's only some 250mb left in the card when I copy the update.app
Click to expand...
Click to collapse
May be you can try with 8 gb once if it is easily available for you

Hi, so none of the methods work. But I could get back to TWRP for Elemental Rom. Still flashing roms from TWRP doesn't boot me in. And now the dload screen doesn't appear when I press the combination. All I have is fastboot mode, erecovery and TWRP installed. But none of the methods work. I am not able to figure what I am doing wrong!!

Try hurupdater.
http://https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
0.3 for nougat or 0.4 for oreo (in my case works)
And remember format data in first time
You need the firmware for your 6x...
Good luck!

hey i am in the same situation as yours, all i am able to boot into is fastboot, nothing beyond that is working, i have the extracted update.app for oreo , the last system i flashed was emui oreo , and nothing else is working i have tried all the options suggested.
could someone guide me on the actual steps needed to flash the .img files as i'm unable to boot into recovery of twrp or openkirin
any help will be appreciated.

ppawan said:
hey i am in the same situation as yours, all i am able to boot into is fastboot, nothing beyond that is working, i have the extracted update.app for oreo , the last system i flashed was emui oreo , and nothing else is working i have tried all the options suggested.
could someone guide me on the actual steps needed to flash the .img files as i'm unable to boot into recovery of twrp or openkirin
any help will be appreciated.
Click to expand...
Click to collapse
Just dload the b340 image of nougat and back to nougat.