Database Info

help I have been installing roms for 10 hours and nothing works

hi i just got a honor 6x and i have been following guides and at one point i had lineage os 13 on the phone but it would only boot to the password screen
so then i side loaded resurrection os 5.7 and it didnt have wifi so i tried upgrading emui and now i can't install any rom it just hangs at "patching ssytem unconditonally"
i have TWRP running on the phone. i just want to go back to stock OS. please help how do i do this?

unknown command [errno] update_huawei_pkg_from_ota_zip from zip failed
when i try to flash the stock huawei rom

i can run fastboot and twrp but nothing else works. i will paypal 15 dollars to someone who can help me

You can download the full firmware directly from honor, unzip it, and place the update.app file in a dload folder that you create on your sd card. Power of the phone then hold volume up, down, and power at the same time to initiate an automatic flash of the room you downloaded. This will erase everything, so be aware.

1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating

Rommco05 said:
Which is your model number and which twrp u have installed?
Click to expand...
Click to collapse
l24 and twrp-3.1.1-0-berlin.img

siddhrsh said:
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Click to expand...
Click to collapse
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw

juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder then reboot your device using 3 button

Rommco05 said:
BLN-L24C567? If yes flash via twrp this two zips, after make reboot recovery in twrp. Should by now in stock recovery and here tap factory reset and after reboot. Now you will be hopefully in emui. Follow only if is correct your fw number which is mentioned here
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
Click to expand...
Click to collapse
by flash, you mean press the top left install button?

Rommco05 said:
Yes, download them and put to sdcard or inter memory. Flash first region and after update zip
Click to expand...
Click to collapse
The region flashes sucessfully but update.zup fails on '32k crc check'

Rommco05 said:
Any news juicyapply ?
Click to expand...
Click to collapse
update_huawei_pkg_from_ota_zip: update pcakage from zip failed
updater process ended with ERROR: ?
Errror installinc zip file '/sdcard/update.zip'

3.1.0-2 is the twrp version

it just says your device is booting now forever

i put it on stock recovery, i can put it back on twrp though

juicyapply said:
i put it on stock recovery, i can put it back on twrp though
Click to expand...
Click to collapse
No, just do a reset in stock recovery.

venugopalu007 said:
No, just do a reset in stock recovery.
Click to expand...
Click to collapse
it doesn't boot to stock recovery, even when i hold down volume and power buttons
i got the recovery using the extractor using huawei

oh my god ok now it is stuck at blue honor screen for an hour after update installed automatically without pressing anything. i just pressed volume and power buttons and it started updating. no menu was provided

now it says your device failed verificitaion

so now the bootloader is locked again and the update installed, but it still doesn't boot and when i try to update again it says verification failed

juicyapply said:
now it says your device failed verificitaion
Click to expand...
Click to collapse
I had the same problem once.
You can try to flash the cust partition of your phone. The "device verification failed"-message should disappear then. It's not enough to only flash boot, system and recovery. If there is a problem with the cust partition of your phone you can also have problems with flashing stock roms via "dload"-method.
1. Download the right stock firmware via the huawei firmware finder. You usually have two .zip files (e.g. update.zip & update_full_BLN-L21_hw_eu.zip). The image file for the cust partition can be found in the update_full_BLN-L21_hw_eu.zip (choose the right one for your model).
2. Unpack update_full_BLN-L21_hw_eu.zip and extract the cust partition with the huawei firmware extractor.
3. Put your phone into fastboot mode
4. Use the following command: fastboot flash cust cust.img
5. Try to boot into your stock rom.

failed to rebrand from AL10 to FL19 - now bricked - need help

I have totally failed to rebrand my FRD-AL10 (EMUI 5, Nougat) to FRD-L19 (because I was hoping to get rid of all the apps/functions/messages in Chinese) by following the steps listed on another thread.
I did eventually manage to get it to identify as FRD-L19 but when it did boot up it had no stock keyboard only voice commands and the phone was unusable . it said it was Android 7, model FRD-L19 and build number was nrd90m test keys?
I tried to update with the latest FRD-L19 update.app by copying it into the dload and vol up+vol down +power buttons press but the update failed and since then I am stuck with the phone refusing to boot, or to boot into twrp recovery.
It hangs at the booting now orange letters screen (It says "Your device is booting now...." and nothing more happens.
If I hold vol up and power up, it hangs at "Your device is booting now...."
If I wait until it says I can press vol up for Erecovery it goes into Huawei erecovery and that tries to download latest version update by wifi, it connects to wifi but says "Getting package info failed".
If I go to reboot from erecovery it goes back to the Your device is booting now.... and stops.
I can shutdown from erecovery (but if its still plugged in it goes straight back to "Your device is booting now...")
From shutdown (and unplugged from USB) - if I hold vol up+ vol down + power it goes to EMUI Installing update then Software Install failed. The update package does not exist. Please download the package again. Reboot system now.
I don't know how to put an alternative update package into dload when I can only use fastboot mode and nothing else?
I can do that by shutting it own from erecovery shut down page and holding down volume and power up.
I assume I need to go back to stock firmware for FRD-AL10 like this one from another thread FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP
and not version 7.0 stock rom for FLD-L19???
Anyway, I unzipped that and use Huawei extractor tool to extract Boot.img, cust.img, recovery.img and sys.img as suggested on this thread.
I can fastboot flash 3 of those but the cust.img fails to flash with "partition error"
I also tried to fastboot format user data but the command failed FAILED (remote: Command not allowed)
I don't think its possible to use the unbrick function of huawei multitool because I can't get into recovery mode?
I don't think I can get a different copy of update.app file into the dload folder internal memory and use the vol up+ vol down +power buttons because I can no longer get the phone to boot to system.
The fastboot screen says PHONE Unlocked
FRP Unlock
Would be very grateful for suggestions on what I should be doing to unbrick this, please. Sorry for being a stupid newbie.... and I honestly have been reading these threads day and night for 2 days but am still stuck!!
Thanks
Edit: is part of the answer to try to flash a different version of twrp again? So I have to put the right version of twrp.img into my adb folder and then fastboot flash recovery twrp*****.img ? Then I might be able to fastboot boot recovery ? Or if twrp works I can flash the right stock rom? (which one? given I was trying to rebrand)
Or if I could somehow get back system to boot, I could use adb push to put the correct update.app into dload on internal memory and use the vol up+ vol down +power???

Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220

Rommco05 said:
Is better following venugopalu method
Click to expand...
Click to collapse
Yes , becasue my zip contains oem restore if the devcie dont have oem it will restore and successfully restore the device

venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks

venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks

So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
I have got that far.
Then do I fastboot reboot?
and hope it boots to system so I can copy over the zip file from my pc with file explorer and then
do I adb reboot recovery (to get into twrp)?
then install the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip file using twrp? (or do you mean another method of installing that rom)?
then still in twrp I do Wipe: format user data?
then do I reboot to system?
At what point do I need to copy the update.app to sdcard\dload and use the vol up+ vol down + power to install the update?
Thanks again

Agatha_honor 8 said:
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks
Click to expand...
Click to collapse
After twrp sucess you have to biot the device it will works normal but you have to go reboot to recovery and do a factory wipe and shutdown then after doebload the official firmware of frd19 which is mm and dlaod the update.app and three buttons trick it will update and relock the bootloader and update to EMUI 5 by the phone updater app in settings

I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?

Agatha_honor 8 said:
I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?
Click to expand...
Click to collapse
bro neglet the mount issues after update.app write sucess reboot the phone once and let it boot comoletly .after that dload the offical ROM of frd l19 . and do a reset in stock recovery.

Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!

Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
No bro not needed , enjoy the device .
Add the fixed tag to the thread.:highfive:
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
Bro but i will suggest you to from marshmallow go directly to the new update of nougat using firmware finder because, the update from b360 is stopped, sh!t huawei server stopped the update idk y , many people also stucked in b360 , so my idea is just go to latest update in firmware finder from marshmallow.
Any help just reply.
If you got another update from b360 just neglet my above steps and go on . Enjoy.

It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!

Agatha_honor 8 said:
It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!
Click to expand...
Click to collapse
Flash this first update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
If after flashing reboot got strucked in blue screen just format factory resey in recovery.

I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??

Agatha_honor 8 said:
I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??
Click to expand...
Click to collapse
Strange
So just update to nougat via system app , later try to flash the zips through twrp and give atry

Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '

Agatha_honor 8 said:
Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '
Click to expand...
Click to collapse
The problem is in b392 they are not flashable , decrease the version try all because idk y the zips are not flashing , in my version frdl02 they are flashed successfully without any issue.

Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
I Need This Firmware Plz FRD-L19432B360
I Tried To Find Full Package But Could Not Find
I Need Help Plz
Thanks Anticipation

bricked honor 8

Hi, i have a honor 8 FRD-L09 unlocked bootloader, I don't know what was the original rom. I can't start it, I tried to install many versions, with dload nothing is working it stops at 5% and gives an error,I achieved to get one at 25% but it then failed but with fastboot and huawei extractor im able to install recovery,boot,system img files but it doesn't changes anything. I have access to erecovery but when I try to connect to a wifi it says that it's a wrong password even though im sure it's the right. If anyone is able to help me it could be nice, Thank you.
I installed twrp recovery but it still boots on emui erecovery.

Hello OG_Winzer
I installed twrp recovery but it still boots on emui erecovery.
Click to expand...
Click to collapse
You need to remove your USB cable to boot on TWRP (press "Power" and "Vol+" buttons, and only release "Power" - only hold "Vol+" - button when first blue screen appears).
If your phone is stuck on message "Device is booting...", you flashed a wrong TWRP version. Ask me if you want to try an another version.
But firstly, did you try this how-to (dload folder method): https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449 ?
Is there a model number written bottom back of your phone? (real FRD-L09 model?)
Good luck! =)

Micdu70 said:
Hello OG_Winzer
You need to remove your USB cable to boot on TWRP (press "Power" and "Vol+" buttons, and only release "Power" - only hold "Vol+" - button when first blue screen appears).
If your phone is stuck on message "Device is booting...", you flashed a wrong TWRP version. Ask me if you want to try an another version.
But firstly, did you try this how-to (dload folder method): https://forum.xda-developers.com/honor-8/how-to/problem-frd-l09-t3596449 ?
Is there a model number written bottom back of your phone? (real FRD-L09 model?)
Good luck! =)
Click to expand...
Click to collapse
I just tried this dload method but the software installation failed at 30%. I don't even know if flashing twrp is really useful and the number on the back of the phone is FRD-L09. I don't know what to do.

OG_Winzer said:
I just tried this dload method but the software installation failed at 30%. I don't even know if flashing twrp is really useful and the number on the back of the phone is FRD-L09. I don't know what to do.
Click to expand...
Click to collapse
Is it "Rollback package" UPDATE.APP which fail at 30%? Try "firmware B131" UPDATE.APP directly, if you have not.
I don't know about extracting ".img" from an UPDATE.APP file and flashing them... seems dangerous. ^^
If you boot on TWRP, you will be able to follow this thing (use FRD-L09 link and do all steps and step 5. fully: "Dlload For FRD-L09" flash to complete properly): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
I can't help you more if it fails again, sorry...

Micdu70 said:
Is it "Rollback package" UPDATE.APP which fail at 30%? Try "firmware B131" UPDATE.APP directly, if you have not.
I don't know about extracting ".img" from an UPDATE.APP file and flashing them... seems dangerous. ^^
If you boot on TWRP, you will be able to follow this thing (use FRD-L09 link and do all steps and step 5. fully: "Dlload For FRD-L09" flash to complete properly): https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
I can't help you more if it fails again, sorry...
Click to expand...
Click to collapse
Rollback package is okay but the firmware fails. I've tried the method with twrp but system.img won't install. I even tried to extract it and install it with fastboot but it says "cannot load system.img"

OG_Winzer said:
Rollback package is okay but the firmware fails. I've tried the method with twrp but system.img won't install. I even tried to extract it and install it with fastboot but it says "cannot load system.img"
Click to expand...
Click to collapse
Try this 10 steps, that's the last idea I could give you...
0. Need an unlocked bootloader / Knowing how to boot on bootloader and use adb/fastboot command-line tools. (GUIDE HERE)
1. Download TWRP:
-- 1a) Recent version (EMUI 5.x installed firmware): twrp-3.1.1-1-frd.img and use fastboot command to flash it
Code:
fastboot flash recovery twrp-3.1.1-1-frd.img
>>>> If phone is stuck on message "device is booting now..." when you try to boot TWRP, use old version.
-- 1b) Old version (EMUI 4.1 installed firmware): twrp-3.0.2-0-frd-modaco-rc1.img and use fastboot command to flash it
Code:
fastboot flash recovery twrp-3.0.2-0-frd-modaco-rc1.img
2. Download this modded FRD-L09C432B131 firmware (.zip): here
3. Copy the zip file to your SD card. (You can do that when your phone is booted on TWRP: plug your USB cable)
4. In TWRP, go to "Wipe" > "Format Data".
5. In TWRP, go to "Flash" > Select the zip file and flash!
6. When finished, do step 4 again before rebooting your phone!
7. Phone can take some minutes to boot, take it easy! If it works, download "stock" (original) B131 firmware: https://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
8. Open the zip file and extract "dload" folder on your computer. Then copy the "dload" folder inside your SD card (root of the SD card).
9. Flash it with "Power" + "Vol-" + "Vol+" buttons.
10. Last step (RECOMMENDED) - Factory reset: how-to
:fingers-crossed:

Help me downgrade to nougat from oreo bln-l22

I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed

ratnesh1992 said:
I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed
Click to expand...
Click to collapse
To keep the phone in usable state you can move to Elemental Rom,, i had the same issue. problem faced with Elemental Rom now is that camera, fingerprint and flash doesn't work. rest of the phone is usable in perfect condition.

ppawan said:
To keep the phone in usable state you can move to Elemental Rom,, i had the same issue. problem faced with Elemental Rom now is that camera, fingerprint and flash doesn't work. rest of the phone is usable in perfect condition.
Click to expand...
Click to collapse
how can i switch to elemental rom, im stuck at erecovery?
my bootloader is locked and already lost my unlocked code?

if your phone model is bln-l22c675 then download B360 full package and flash by dload method us sdcard for dload method

ratnesh1992 said:
I FLASHED OREO ON HONOR 6X USING HWOTA7 ,AND NOW I AM UNABLE TO DOWNGRADE TO NOUGAT. PHONE DOES NOT BOOT INTO RECOVERY MODE OR ERECOVERY MODE. IT ALWAYS GOES TO ERROR MODE:-
FLASHED STOCK RECOVERY FROM OREO BY FASTBOOT
NOW IT GOES TO RECOVERY MODE BUT does NOT GOES TO ERECOVERY MODE
looks like this:-
ERROR MODE
Attention
please update system again
Error
Func NO : 10 (boot image)
Error NO: 2 (load failed)
flashing firmware by dload method always failed after 6-7%
Anyone please help me downgrading to nougat. i am very very disappointed
Click to expand...
Click to collapse
your problem is easy to solve. do u have stock emui8 rom that you have flashed then extract update.app then download hauwei update extractor and load this update app. if it fails to load then untick something like md5 check in options then it will load. now extract these images from list
RAMDISK.img, RECOVERY_RAMDIS.img, and KERNEL.img.
now keep then in fastboot folder connect you phone to pc by holding vol - you will enter into fastboot then flash these images in order
fastboot flash ramdisk RAMDISK.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash kernel KERNAL.img
then reboot your device will boot fine if it enter into recovery and asks to formate data don't do it just do reboot.

Ramesh006 said:
your problem is easy to solve. do u have stock emui8 rom that you have flashed then extract update.app then download hauwei update extractor and load this update app. if it fails to load then untick something like md5 check in options then it will load. now extract these images from list
RAMDISK.img, RECOVERY_RAMDIS.img, and KERNEL.img.
now keep then in fastboot folder connect you phone to pc by holding vol - you will enter into fastboot then flash these images in order
fastboot flash ramdisk RAMDISK.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash kernel KERNAL.img
then reboot your device will boot fine if it enter into recovery and asks to formate data don't do it just do reboot.
Click to expand...
Click to collapse
Will this process works on locked bootloader?

alamatnitotoy said:
Will this process works on locked bootloader?
Click to expand...
Click to collapse
No in locked bootloader u can't flash anything

bln-l22 flashing hwota8 goes wrong , while rebranding i dont know why i did this . Now my bootloader is locked ,frp unlock . Erecovery not restoring firmware , Dload method not working no sign of any progress everytime device boot's in erecovery mode.
Help me out coz you all know honor services only 3 service center in delhi and they even don't about what is bootloader, Only XDA guys can help.

doray880 said:
bln-l22 flashing hwota8 goes wrong , while rebranding i dont know why i did this . Now my bootloader is locked ,frp unlock . Erecovery not restoring firmware , Dload method not working no sign of any progress everytime device boot's in erecovery mode.
Help me out coz you all know honor services only 3 service center in delhi and they even don't about what is bootloader, Only XDA guys can help.
Click to expand...
Click to collapse
Do you have unlock code for Bootloader. Unlock Bootloader again

I am also stuck same issue

Test to flash nougat rom with HurUpdater 0.3

Help unbricking Honor 6x L-24

Model: BLN L-24
I am stuck in error mode with
Func NO: 11 (recovery image)
Error NO: 2 (failed load!)
I have tried to re-flash several custom recovery I have used in the past, however none seem to work and end with the same result.
I have also tried flashing the stock recovery2.img from the Update.app for my model, but that also doesn't work and ends with a FAILED (remote: Partition Error)
I have run into troubles before, but I'm stumped with this one, I can at least still boot into fastboot.
Any help would be appreciated.

Hyperweasle said:
Model: BLN L-24
I am stuck in error mode with
Func NO: 11 (recovery image)
Error NO: 2 (failed load!)
I have tried to re-flash several custom recovery I have used in the past, however none seem to work and end with the same result.
I have also tried flashing the stock recovery2.img from the Update.app for my model, but that also doesn't work and ends with a FAILED (remote: Partition Error)
I have run into troubles before, but I'm stumped with this one, I can at least still boot into fastboot.
Any help would be appreciated.
Click to expand...
Click to collapse
What's your Android version. What were you trying to do. What recoveries have you tried and what's the command you're using. I had the same error yesterday because I flashed wrong TWRP. Fixed it by reflashing correct image.

Mannan Qamar said:
What's your Android version. What were you trying to do. What recoveries have you tried and what's the command you're using. I had the same error yesterday because I flashed wrong TWRP. Fixed it by reflashing correct image.
Click to expand...
Click to collapse
The version was Android 8 Oreo
I started out trying to go back to EMUI 8.0 from Open Kirin RROS Beta 2. So I followed this guide https://forum.xda-developers.com/honor-6x/how-to/update-bln-l22c675-emui-5-x-x-to-emui-8-t3819317
I tried the TWRP from download in the guide that was in the HWOTA8_BLN folder along with the TWRP from here https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
The command I was using to flash the recoveries I believe is correct also which is the fastboot flash recovery_ramdisk "name of image" command. That command will flash successfully with the custom recoveries, however it will still bring up the error mode despite pressing +vol button.
The stock recoveries I extracted from the update.app file, I downloaded from here: https://pro-teammt.ru/firmware-database/?firmware_model=bln-L24&firmware_page=0. Which are the stock recoveries that end up with the FAILED (remote: Partition Error) Message.

Hyperweasle said:
The version was Android 8 Oreo
I started out trying to go back to EMUI 8.0 from Open Kirin RROS Beta 2. So I followed this guide https://forum.xda-developers.com/honor-6x/how-to/update-bln-l22c675-emui-5-x-x-to-emui-8-t3819317
I tried the TWRP from download in the guide that was in the HWOTA8_BLN folder along with the TWRP from here https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
The command I was using to flash the recoveries I believe is correct also which is the fastboot flash recovery_ramdisk "name of image" command. That command will flash successfully with the custom recoveries, however it will still bring up the error mode despite pressing +vol button.
The stock recoveries I extracted from the update.app file, I downloaded from here: https://pro-teammt.ru/firmware-database/?firmware_model=bln-L24&firmware_page=0. Which are the stock recoveries that end up with the FAILED (remote: Partition Error) Message.
Click to expand...
Click to collapse
You tried to use HWOTA 8 to go back to stock? Dude. Use Hurupdater. Now, to fix. First of all search XDA for TWRP for hi6250. You can use Elemental but try this one first. Flash it via PowerShell. Does that give any errors? Now once it's flashed, don't reboot. Disconnect phone from PC and hold Volume Up and Power button simultaneously. You should boot into TWRP. What does bootloader say. Phone Locked or Unlocked? What about FRP? The stock recovery didn't work cause you used the BLN-L24 one which is for EMUI 5. You're on EMUI 8. Try to boot into TWRP

Mannan Qamar said:
You tried to use HWOTA 8 to go back to stock? Dude. Use Hurupdater. Now, to fix. First of all search XDA for TWRP for hi6250. You can use Elemental but try this one first. Flash it via PowerShell. Does that give any errors? Now once it's flashed, don't reboot. Disconnect phone from PC and hold Volume Up and Power button simultaneously. You should boot into TWRP. What does bootloader say. Phone Locked or Unlocked? What about FRP? The stock recovery didn't work cause you used the BLN-L24 one which is for EMUI 5. You're on EMUI 8. Try to boot into TWRP
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked

Hyperweasle said:
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked
Click to expand...
Click to collapse
Use Huawei multi tool 8 to unbrick your device it's easier and just use the firmware that you were in before

Hyperweasle said:
https://forum.xda-developers.com/p8.../recovery-twrp-3-2-3-0-huawei-hi6250-t3859959
Ok so I flashed this one with Powershell, and it didn't show up any errors. However I still can't seem to boot into recovery and it continues to show up error mode, even while doing as you say and pressing the vol+ and power in fastboot. Also both FRP and Phone are unlocked
Click to expand...
Click to collapse
Try Dload

hamid1999 said:
Use Huawei multi tool 8 to unbrick your device it's easier and just use the firmware that you were in before
Click to expand...
Click to collapse
Mannan Qamar said:
Try Dload
Click to expand...
Click to collapse
I tried both of those things and still couldn't get it working.
dload doesn't pop up and multi tool fails to flash the recovery_ramdisk.img when trying to unbrick it.
I do remember before any of this happened that I was having a problem with my internal storage as I didn't have access to it. All file mangers I tried couldn't access it and showed it up as blank and TWRP showed it with 0mb.
I have a feeling that my internal storage is screwed up and that's why all attempt to flash anything have failed. I may just have face the fact that it's dead.

Hyperweasle said:
I tried both of those things and still couldn't get it working.
dload doesn't pop up and multi tool fails to flash the recovery_ramdisk.img when trying to unbrick it.
I do remember before any of this happened that I was having a problem with my internal storage as I didn't have access to it. All file mangers I tried couldn't access it and showed it up as blank and TWRP showed it with 0mb.
I have a feeling that my internal storage is screwed up and that's why all attempt to flash anything have failed. I may just have face the fact that it's dead.
Click to expand...
Click to collapse
As long as it turns on it isn't dead. Did you try DC unlocker? That often works. Try it and if it fails go to service center and play dumb. Say it happened like this after a update.
Edit. Let it power off. When it turns on hold Volume Up