Database Info

(soft)bricked my device. Is there a fix?

Hi all,
I installed the TWRP recovery for my mate 7 - 09 version, with lollipop 5.1. But then I unknowingly wiped something I shouldn't have: I think it was the system folder. No backups were made
My phone keeps starting up to the huawei logo and then reboots\turns off. I can get into fastboot&rescue mode, but that's it. No recovery, no 3-button fix (as far as I know).
The second problem is that I cannot get my device to be recognised by my pc. adb devices doesn't give me any results.
I don't feel like I can install the drivers properly as well. Pherhaps thats the problem? How can I do this? I have a driversetup from a mate7 download, but double clicking it doesnt show any prompts.
Anyone who can help me in any way is more than welcome!

dekraan said:
Hi all,
I installed the TWRP recovery for my mate 7 - 09 version, with lollipop 5.1. But then I unknowingly wiped something I shouldn't have: I think it was the system folder. No backups were made
My phone keeps starting up to the huawei logo and then reboots\turns off. I can get into fastboot&rescue mode, but that's it. No recovery, no 3-button fix (as far as I know).
The second problem is that I cannot get my device to be recognised by my pc. adb devices doesn't give me any results.
I don't feel like I can install the drivers properly as well. Pherhaps thats the problem? How can I do this? I have a driversetup from a mate7 download, but double clicking it doesnt show any prompts.
Anyone who can help me in any way is more than welcome!
Click to expand...
Click to collapse
Hey Buddy, here's what you can try to do:
1.) Boot connect your phone to your computer.
2.) Next, boot your phone to fastboot.
3.) Next, open command prompt from the folder where your ADB files are stored.
4.)On CMD type:
fastboot devices
5.) If your device appears then you have 2 options now. You can either:
a.) Flash Stock recovery.img or
b.) Flash back TWRP
6.) If choosing option a.) you can then save stock firmware within dload folder on your external sd card then force upgrade via 3 btn method.
7.) If choosing option b.) you can boot to twrp then either sideload a custom rom or try to save on your external sd and flash

blitzkriegger said:
Hey Buddy, here's what you can try to do:
1.) Boot connect your phone to your computer.
2.) Next, boot your phone to fastboot.
3.) Next, open command prompt from the folder where your ADB files are stored.
4.)On CMD type:
fastboot devices
5.) If your device appears then you have 2 options now. You can either:
a.) Flash Stock recovery.img or
b.) Flash back TWRP
6.) If choosing option a.) you can then save stock firmware within dload folder on your external sd card then force upgrade via 3 btn method.
7.) If choosing option b.) you can boot to twrp then either sideload a custom rom or try to save on your external sd and flash
Click to expand...
Click to collapse
I'll give that a try, thank you. With step 1, you just mean: connect the phone through usb to the computer, right?
When I rooted the phone, I did so on my work laptop, so I am hoping I can get it recognised there, but lets see what happens at home.
EDIT:
Ok, i've typed in fastboot devices, and it gave me one line with a 16-digit code (numbers and letters) some white space and then the word fastboot. What does that mean?

That should meen it recognizes your phone in fastboot mode. Next step is to flash as stated in step 5 that in the instructions.
Sent from my HUAWEI MT7-L09 using Tapatalk

dekraan said:
I'll give that a try, thank you. With step 1, you just mean: connect the phone through usb to the computer, right?
When I rooted the phone, I did so on my work laptop, so I am hoping I can get it recognised there, but lets see what happens at home.
EDIT:
Ok, i've typed in fastboot devices, and it gave me one line with a 16-digit code (numbers and letters) some white space and then the word fastboot. What does that mean?
Click to expand...
Click to collapse
EDIT AGAIN:
Ok, this is what I did. I downloaded the well known mate7 package, extracted the b119 tools folder and I put the twrp_2.8.7.0_mate7_5.1.img file from this forum (the TWRP for 5.1) inside this folder.
Then, I open cmd inside the folder, and I typed: fastboot flash recovery twrp_2.8.7.0_mate7_5.1.img. This is what happens:
target reported max download size of 471859200 bytes
sending 'recovery'(12644 KB)...
OKAY [ 1.302s]
writing 'recovery'...
OKAY [ 0.455s]
finished. total time: 1.756s
Now, I finally managed to get back into TWRP! I've only got 2% battery though (but I see a + which I think means charging...EDIT: yes, it is on 3% now. Better leave it like this...).
It tells me this:
TWRP has detected an unmodified system partition.
TWRP can leave your system partition unmodified to make it easier for you to take official updates. TWRP will be unable to prevent the stock rom from replacing TWRP and will not offer to root your device. Installing zips or performing adb operations may still modify the system partition.
I decided to swipe, to allow modifications.
So, I've got twrp back! For lollipop. This probably means I have to flash the lollipop rom? I will download the update.zip file next and put it on my sd card (using my pc and a microsd adapter...)
Keep you posted!

Ok, this is not working.
I put update.zip on my sd-card, and tried to install it. This is what I get:
Installing 'sd-ext/update.zip'...
checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:unknown command [errno]
file_getprop: failed to stat
E: error executing updater binary in zup 'sd-ext/update.zip'
Error flashing zip 'sd-ext/update.zip'...
Updating partition details...
...done
EDIT:
I tried to sideload but on my pc I get:
error: protocol fault (no status)
And on my TWRP I get:
You need adb 1.0.32 or newer to sideload to this device.
EDIT:
Updated my adb to 1.0.32 for windows, and rebooted everything. Now i'm at 6% of sideload. Hoping this will work!
EDITn the PC everything seems to go ok, but on my phone it says: E:Zip signature verification failed:1
What should I try next?

dekraan said:
Ok, this is not working.
I put update.zip on my sd-card, and tried to install it. This is what I get:
Installing 'sd-ext/update.zip'...
checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:unknown command [errno]
file_getprop: failed to stat
E: error executing updater binary in zup 'sd-ext/update.zip'
Error flashing zip 'sd-ext/update.zip'...
Updating partition details...
...done
EDIT:
I tried to sideload but on my pc I get:
error: protocol fault (no status)
And on my TWRP I get:
You need adb 1.0.32 or newer to sideload to this device.
EDIT:
Updated my adb to 1.0.32 for windows, and rebooted everything. Now i'm at 6% of sideload. Hoping this will work!
EDITn the PC everything seems to go ok, but on my phone it says: E:Zip signature verification failed:1
What should I try next?
Click to expand...
Click to collapse
I don't advise you to flash lollipop firmware first. It's more prudent to go back to kitkat first as I believe Lollipop needs kitkat as base
1.) Put stock kitkat update.app on dload folder of your memory card. Also make sure you have the LO9 stock kitkat recovery.
2.) With your phone connected to pc, go to twrp and reboot to bootloader.
3.) Once on bootloader open cmd on your tools folder then fastboot flash the stock kitkat recovery.
4.) Once done, fastboot reboot then force upgrade to install stock firmware.
5.) Once you have stock kitkat follow the drill to reach lollipop

blitzkriegger said:
I don't advise you to flash lollipop firmware first. It's more prudent to go back to kitkat first as I believe Lollipop needs kitkat as base
1.) Put stock kitkat update.app on dload folder of your memory card. Also make sure you have the LO9 stock kitkat recovery.
2.) With your phone connected to pc, go to twrp and reboot to bootloader.
3.) Once on bootloader open cmd on your tools folder then fastboot flash the stock kitkat recovery.
4.) Once done, fastboot reboot then force upgrade to install stock firmware.
5.) Once you have stock kitkat follow the drill to reach lollipop
Click to expand...
Click to collapse
Hi, thank you for your advice. I have but one question remaining: what stock kitkat update should I use? And where can I find the right recovery that goes with it?
I've tried several recovery_stock.img I found, and it does take away TWRP, so it might have done the trick. Only problem is that I cannot force upgrade to install whats on my sd-card....The phone keeps turning on (after a long push) and after seeing the logo for a little while, it turns off (short vibration)... Is there another way?

dekraan said:
Hi, thank you for your advice. I have but one question remaining: what stock kitkat update should I use? And where can I find the right recovery that goes with it?
I've tried several recovery_stock.img I found, and it does take away TWRP, so it might have done the trick. Only problem is that I cannot force upgrade to install whats on my sd-card....The phone keeps turning on (after a long push) and after seeing the logo for a little while, it turns off (short vibration)... Is there another way?
Click to expand...
Click to collapse
You should flash B137SP03 firmware. You can also refer to this guide:
http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888
1.)Prepare the Stock B137SP03 firmware on your SD card
2.)Download the fastboot.zip guide and extract it to a separate folder.
3.) next connect your phone to your computer and go to fastboot mode.
4.) Flash the boot.img and recovery.img you find on that guide.
5.) Once done, do the force upgrade with the B137 firmware.

blitzkriegger said:
You should flash B137SP03 firmware. You can also refer to this guide:
http://forum.xda-developers.com/mate-7/help/5-1-to-4-4-2-bootloop-t3132888
1.)Prepare the Stock B137SP03 firmware on your SD card
2.)Download the fastboot.zip guide and extract it to a separate folder.
3.) next connect your phone to your computer and go to fastboot mode.
4.) Flash the boot.img and recovery.img you find on that guide.
5.) Once done, do the force upgrade with the B137 firmware.
Click to expand...
Click to collapse
I've followed the guide you are reffering to. And I flashed the boot and recovery, and managed to get the roll back force installed. But for the life of me, I cannot get my phone to force install the B137 zip. I just can't get into force install mode. Are there tips or tricks? I am holding power up and down, and then press power untill I feel a short vibration. But all it does it show me the huawei logo screen and then shuts down again.
Very frustrating!
EDIT:
ok, I noticed that when my sd-card is not inserted, the phone easily boots into the force install mode. It shows the logo for a couple of seconds, screen goes black and then the force install loads. So this is what I did: insert the sd card half way, press vol up and down, and power on. Then after the logo when the screen goes black, insert the sd-card all the way and when the phone goes to force install mode, it can find the update!
Now installing.... hope this helps someone else out there!

Worked! And I am up and running again! Thank you for saving my mate

I got my Mate bricked and i've been trying to figure out how to solve it. I tried lots of things from different guides, but just an hour ago I found this guide and it worked! I can't tell you how happy I am right now, thanks guys!

aleksik said:
I got my Mate bricked and i've been trying to figure out how to solve it. I tried lots of things from different guides, but just an hour ago I found this guide and it worked! I can't tell you how happy I am right now, thanks guys!
Click to expand...
Click to collapse
Glad to hear both of you guys have your mates up and running again. As long as a phone turns on and is not dead as a brick there's always hope it can be restored

Hi everyone, I have the same problem with my mate 7, i was messing with unlocking bootloader(which I succesfully have done), couldn't get my phone rooted so installed TWRP recovery for Lollipop(which was already installed when i bought the phone). Ended up with soft bricked phone(no OS, no recovery at all).
I tried different tutorials how to fix it, none of them worked(including that one unfortunatelly).
I have taken some pictures to show you what the problem is but cannot post them until reach 10 posts on forum
Basically, i can get into fastboot mode by holding volume down with power button. Windows and Hisuite don't recognise my device but in fastboot mode i can check devices connected. Typing "fastboot devices" i get "P6Q7M14A15008421 fastboot", which i guess is my device indeed.
After that i try flashing boot.img and recovery.img(which are reported OK). Then rebooting with 3 button(vol up and down, power) and Huawei logo screen appears for a bit and goes into white screen saying "rescue mode" and at the bottom: "Error Func NO: 10(FUNC_BOOT_RECOVERY) Error NO:2". Trying rebooting into recovery mode(vol up and power) it shows similar "recovery mode" screen but with different errors: "Error! Func NO:12(FUNC_LOAD_IOM3) Error NO:1".
That's it! It seems like i cannot flash my device successfully for some reason. What Windows version did you guys use?? I tried Win 8.0 and Win 10, maybe i should use older systems? Please help, i had my phone for a week only and broke it(

I can't help you much because I don't have enough knowledge about these kind of things.. I use Windows 7 and from my previous experiences I can say that working with Windows 8 can be frustrating. PS. I bricked my Mate 12hrs after buying it

muzammil84 said:
Hi everyone, I have the same problem with my mate 7, i was messing with unlocking bootloader(which I succesfully have done), couldn't get my phone rooted so installed TWRP recovery for Lollipop(which was already installed when i bought the phone). Ended up with soft bricked phone(no OS, no recovery at all).
I tried different tutorials how to fix it, none of them worked(including that one unfortunatelly).
I have taken some pictures to show you what the problem is but cannot post them until reach 10 posts on forum
Basically, i can get into fastboot mode by holding volume down with power button. Windows and Hisuite don't recognise my device but in fastboot mode i can check devices connected. Typing "fastboot devices" i get "P6Q7M14A15008421 fastboot", which i guess is my device indeed.
After that i try flashing boot.img and recovery.img(which are reported OK). Then rebooting with 3 button(vol up and down, power) and Huawei logo screen appears for a bit and goes into white screen saying "rescue mode" and at the bottom: "Error Func NO: 10(FUNC_BOOT_RECOVERY) Error NO:2". Trying rebooting into recovery mode(vol up and power) it shows similar "recovery mode" screen but with different errors: "Error! Func NO:12(FUNC_LOAD_IOM3) Error NO:1".
That's it! It seems like i cannot flash my device successfully for some reason. What Windows version did you guys use?? I tried Win 8.0 and Win 10, maybe i should use older systems? Please help, i had my phone for a week only and broke it(
Click to expand...
Click to collapse
Sounds like the wrong boot.img or recovery.img has been flashed. May I know what Mate 7 model you have and which Lollipop firmwre version your phone came last with?
Try to obtain boot.img and revoery.img for your lollipop version then flash that via fastboot

blitzkriegger said:
Sounds like the wrong boot.img -recovery.img has been flashed. May I know what Mate 7 model you have and which Lollipop firmwre version your phone came last with?
Try to obtain boot.img and revoery.img for your lollipop version then flash that via fastboot
Click to expand...
Click to collapse
My phone mt7-09l, european version 16gb. Came with lollipop 5.1 when I bought it but I think I have formatted it via twrp recovery so it shouldn't matter what boot and recovery version I am trying to flash, should it? I'll extract boot and recovery from b308 today andtry that, see if this works. If not, only thing I can try is using win7 and that's it really, no more possibilities

dekraan said:
I've followed the guide you are reffering to. And I flashed the boot and recovery, and managed to get the roll back force installed. But for the life of me, I cannot get my phone to force install the B137 zip. I just can't get into force install mode. Are there tips or tricks? I am holding power up and down, and then press power untill I feel a short vibration. But all it does it show me the huawei logo screen and then shuts down again.
Very frustrating!
EDIT:
ok, I noticed that when my sd-card is not inserted, the phone easily boots into the force install mode. It shows the logo for a couple of seconds, screen goes black and then the force install loads. So this is what I did: insert the sd card half way, press vol up and down, and power on. Then after the logo when the screen goes black, insert the sd-card all the way and when the phone goes to force install mode, it can find the update!
Now installing.... hope this helps someone else out there!
Click to expand...
Click to collapse
I'm stuck on this stage, no errors while flashing but no boot either. Shows logo then like a spark a bit of music and animation (1 sec maybe) and reboot, so on and on and on...

muzammil84 said:
My phone mt7-09l, european version 16gb. Came with lollipop 5.1 when I bought it but I think I have formatted it via twrp recovery so it shouldn't matter what boot and recovery version I am trying to flash, should it? I'll extract boot and recovery from b308 today andtry that, see if this works. If not, only thing I can try is using win7 and that's it really, no more possibilities
Click to expand...
Click to collapse
If you were on Lollipop when everything went sour, you should do what I did, thanks to advice from @blitzkriegger:
You should flash B137SP03 firmware. You can also refer to this guide:
http://forum.xda-developers.com/mate...tloop-t3132888
1.)Prepare the Stock B137SP03 firmware on your SD card
2.)Download the fastboot.zip guide and extract it to a separate folder.
3.) next connect your phone to your computer and go to fastboot mode.
4.) Flash the boot.img and recovery.img you find on that guide.
5.) Once done, do the force upgrade with the B137 firmware.
I used the full steps from the link in there: flashed the right boot and recovery through fastboot. Then I flashed the rollback zip from my sd-card, and then I flashed the B137 zip from my sd-card. I can't tell you more about it, obviously

brack11 said:
I'm stuck on this stage, no errors while flashing but no boot either. Shows logo then like a spark a bit of music and animation (1 sec maybe) and reboot, so on and on and on...
Click to expand...
Click to collapse
Been there, done that. Very frustrating! I've tried several things, none of which are probably the right way, but they worked for me. sometimes....
Can you get into stock recovery (vol+ and power)? What I tried several times was wipe cache, and then hold the powerbutton untill my phone turned off. That worked occasionally to get the device totally turned off. Then try to get to force update with your sd-card half way in, and flip it in totally when the logo dissapears and the screen is black. I also tried to shut down the constant starting up by going into fastboot/recovery mode and then holding power down. As long as it takes. Good luck! And hopefully someone can give you proper advice...

Desperate for a Root Method for my P8 Max

Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael

flash twrp recovery and install root with it very easy way

A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael

Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search

michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy

rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.

michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone

You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael

BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!

Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing

I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)

You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here

Have u unlocked the bootloader?
BTW my method i posted works if u do it right!

michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img

You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk

Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software

What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk

Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options

I think it's time to unroot and flash a new system and do it like i posted, then it will work!

michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?

Honor 6 - Unable to access recovery mode. Stuck at boot screen (honor logo)

Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath

sampathnayak09 said:
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
Click to expand...
Click to collapse
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)

How to return back to Stock Recovery & Install Stock Rom.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.

muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath

sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
@DigiGoon

@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img

@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
mahadikrs said:
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
Click to expand...
Click to collapse
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.

muradulislam said:
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
Click to expand...
Click to collapse
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.

sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs

mahadikrs said:
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
Click to expand...
Click to collapse
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.

muradulislam said:
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
Click to expand...
Click to collapse
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0

DigiGoon said:
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Hi,
I did flash the stock recovery, but my phone keeps rebooting and doesn't get into recovery mode.
I am sure it has sufficient battery charge. (Close to 90%).
Is there a way to do a clean install on Android phones? Like the way we install Windows OS on computers. Format hard disks, create partitions and then install a fresh OS?
Thanks

mahadikrs said:
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
Click to expand...
Click to collapse
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?

sampathnayak09 said:
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
Click to expand...
Click to collapse
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.

mahadikrs said:
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
Click to expand...
Click to collapse
Thank you for providing the links. Let me try installing these.

muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
goldfinv said:
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
Click to expand...
Click to collapse
Phone has 75% + charge as shown in TWRP recovery.

sampathnayak09 said:
Phone has 75% + charge as shown in TWRP recovery.
Click to expand...
Click to collapse
Maybe try flashing one of the custom EMUI ROMs via TWRP?
Sent from my H60-L04 using XDA Labs

@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?

sampathnayak09 said:
@[email protected]@goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Give it a couple of tries. Users have suggested that it usually gets stuck somewhere but trying for 2,3 times gets the job done.
Sent from my PLK-L01 using XDA Labs

sampathnayak09 said:
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Let me know which Rom version is your phone running now & which version you are trying to migrate to.
Also if 3 button Force update is not working then you can try the project menu option.
But first let me know what state your phone is currently in.

Unable to access bootloader after rebranding attempt (AL00 (B225) -> L29 (C636))

I was running the Ephemeral Mate 9 B225 ROM on AL00. It worked well but I wasn't satisfied with the custom ROM.
So I decided to rebrand to MHA-L29 and run a stock rom.
I started converting my MHA-AL00 (B225) to MHA-L29 using this guide: Link
I've override the L29C636 OEMinfo while keeping the other 5 existing files of the original OEMinfo intact. (See attachment for original OEMinfo files)
I got stuck after restoring the new OEMinfo through TWRP recovery as stated in the guide.
The phone booted up and started the installation of the new firmware. When completed it did a reboot but it never started up again.
Now my phones doesn't respond to input from physical buttons although my PC does recognise a decive as "HI3650". In device manager it also shows up as "Android Bootloader Interface".
Summary of process followed:
1. Bootloader unlocked
2. Instaled TWRP
3. Flashed Ephemeral Mate 9
4. Did a OEMinfo back-up
5. Changed AL00B225 OEMinfo to L29C636 oeminfo
6. TWRP back-up recovery
Next step should be to unlock the bootloader and instal TWRP again but I can't get to interact with the phone at this stage.
Can anyone point to what I did wrong and/or advice me on the next steps I could take?

Use this link mate, always succeed for me, dont need to do anything, just download 3 big files, copy to sdcard and run the bat file.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108

lemonade747 said:
Use this link mate, always succeed for me, dont need to do anything, just download 3 big files, copy to sdcard and run the bat file.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Click to expand...
Click to collapse
I can copy those files to the SD-card though a different source.
How can I run the update bat file from the SD when its inserted in my phone?
The phone doesn't respons to ADB and I can't get it to boot in bootloader or recovery. It even doesn't show up as a storage device at my PC (both internal and SD storage).

30-08-2017 14:50 UPDATE: It seems fastboot does recognise the device but adb doesn't. It there a way to use fastboot command to run the bat file or restore the OEMfile back-up. Both are present on the SD-card.
Questions @lemonade747: Does the phone need be be bootloader unlocked and TWRP instaled? I have a slight suspicion that that it both the bootloader got locked and TWRP uninstaled afther the TWRP recovery back-up to L29C636.

Bulrock said:
30-08-2017 14:50 UPDATE: It seems fastboot does recognise the device but adb doesn't. It there a way to use fastboot command to run the bat file or restore the OEMfile back-up. Both are present on the SD-card.
Questions @lemonade747: Does the phone need be be bootloader unlocked and TWRP instaled? I have a slight suspicion that that it both the bootloader got locked and TWRP uninstaled afther the TWRP recovery back-up to L29C636.
Click to expand...
Click to collapse
Go to download mode (power + volume down), plug the cable and run the bat file from the link I give (remember to download all small link and extract to the same folder), follow its instruction (in the cmd window) to complete the installation. Sorry I cant give your more clearly step. Regarding your question, if your phone has already unlocked BL, it will move to the next step (install the recovery), if not it will ask you put in your passcode to unlock BL then the next step will happen. All thing I said here is in that bat file, very detail.

lemonade747 said:
Go to download mode (power + volume down), plug the cable and run the bat file from the link I give (remember to download all small link and extract to the same folder), follow its instruction (in the cmd window) to complete the installation. Sorry I cant give your more clearly step. Regarding your question, if your phone has already unlocked BL, it will move to the next step (install the recovery), if not it will ask you put in your passcode to unlock BL then the next step will happen. All thing I said here is in that bat file, very detail.
Click to expand...
Click to collapse
Thanks for your detailed explanation, but it didn't solve the problem.
The phone is not responsive to go to bootloader mode (power + volume down) and the screen stays black. Fastboot command also dont seem to get it in bootloader mode. I keep getting the error message: (remote: Command not allowed).
The phone won't start up and is not responsive to any input and therefore unable to check status of USB-debugging. (unknown if it is enabled or disabled at this stage).
This stage happend, as explained in the first post, through TWRP back-up recovery with L29C636 OEMinfo files.

Bulrock said:
Thanks for your detailed explanation, but it didn't solve the problem.
The phone is not responsive to go to bootloader mode (power + volume down) and the screen stays black. Fastboot command also dont seem to get it in bootloader mode. I keep getting the error message: (remote: Command not allowed).
The phone won't start up and is not responsive to any input and therefore unable to check status of USB-debugging. (unknown if it is enabled or disabled at this stage).
This stage happend, as explained in the first post, through TWRP back-up recovery with L29C636 OEMinfo files.
Click to expand...
Click to collapse
There are two method to go to the download mode:
1. Make sure the phone DOES NOT connect to any charger (via cable). Press volume down + Power button and wait at least 10 seconds. If the phone are connecting to charger or laptop, it wont work.
2. Press and hold the volume down button then plug the cable to your laptop (or charger but I prefer laptop cuz we can move to the next step without disruption), it will enter the download mode automatically.
If after trying two method above and still dont work for you, you may need to flash stock rom (including stock firmware) by using E-recovery method.

5-9-2017 UPDATE: I've been unable to solve this issue by myself. The phone is sent for repairs, fingers crossed they will accept it....

honour 6x bricked

Hi, today i tried installing an ota update on my rooted honor 6x.
it all went wrong, my os is gone, my twrp recovery doesnt work and i get in error mode everytime i try to boot.
The error mode screen says:
ERROR MODE
Attention!
please update system again
Func NO:11 (recovery image)
Error NO:2 (load failed!)

sameer.shekhar2 said:
Hi, today i tried installing an ota update on my rooted honor 6x.
it all went wrong, my os is gone, my twrp recovery doesnt work and i get in error mode everytime i try to boot.
The error mode screen says:
ERROR MODE
Attention!
please update system again
Func NO:11 (recovery image)
Error NO:2 (load failed!)
Click to expand...
Click to collapse
Hi,
Use this method in this post to go back to stock rom !
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

ben75011 said:
Hi,
Use this method in this post to go back to stock rom !
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
Click to expand...
Click to collapse
for your given procedure i need recovery and my recovery is corrupted thats why i am getting message error 11.
and thankyou for help..

sameer.shekhar2 said:
for your given procedure i need recovery and my recovery is corrupted thats why i am getting message error 11.
and thankyou for help..
Click to expand...
Click to collapse
Switch off your mobile
Hold volume down and power button same time and connect USB on computer your Fastboot screen opens
Then run cmd on system on adb folder by shift+right click open commend window here
Then flash twrp there using twrp in pasted in adb folder
fastboot recovery twrp.img
Hola done you are now flashed twrp
Then
fastboot reboot
Switch off your mobile now press volume up+power and hold
Now system open in twrp
There you can flash any custom rom
Done....
But
If you want to install stock rom
Go to gettroid web site and download stock firmware for honor mobile of your region
Extract it
Copy dload folder on SD card (format it to FAT if this process doesn't work for you)
Place SD card on mobile switch off your mobile
Then press and hold volume up+ volume down + power until emui symbol shows up
It will start updating your stock rom if initially failed updating on 5% then you downloaded wrong version or your SD card is not in Fat mode
If it reaches 100 percentage all done it restart automatically into rom
That's it done it worked for me just today
Hope it will help you to ooo...

devil3307 said:
Switch off your mobile
Hold volume down and power button same time and connect USB on computer your Fastboot screen opens
Then run cmd on system on adb folder by shift+right click open commend window here
Then flash twrp there using twrp in pasted in adb folder
fastboot recovery twrp.img
Hola done you are now flashed twrp
Then
fastboot reboot
Switch off your mobile now press volume up+power and hold
Now system open in twrp
There you can flash any custom rom
Done....
But
If you want to install stock rom
Go to gettroid web site and download stock firmware for honor mobile of your region
Extract it
Copy dload folder on SD card (format it to FAT if this process doesn't work for you)
Place SD card on mobile switch off your mobile
Then press and hold volume up+ volume down + power until emui symbol shows up
It will start updating your stock rom if initially failed updating on 5% then you downloaded wrong version or your SD card is not in Fat mode
If it reaches 100 percentage all done it restart automatically into rom
That's it done it worked for me just today
Hope it will help you to ooo...
Click to expand...
Click to collapse
i tried it but my mobile not connecting with pc. is there any service tool or any thing which i can try to connect my phone with pc.
every time it showing only error screen. nothing else.. and i think that my bootloader is also locked..