Database Info

not responding to sp flash tool

my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!

abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Try META MODE......!
flash mobile by removing battery
1.remove battery and hold volume + button
2.then connect to pc then flash it through sp tool

abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium

demongokul said:
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
Click to expand...
Click to collapse
No i m using Windows 7

bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing

revanth22 said:
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
Click to expand...
Click to collapse
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???

abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
dont worry its a simple problem
check this post it will help u
http://forum.xda-developers.com/showthread.php?t=2180436

Buddy no problem with Windows 8.
It works fine i am using it. Just follow this procedure to install proper drivers.
Link: http://forum.xda-developers.com/showthread.php?t=2370906

Solution
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
Bro, follow all the steps of using SP Flash tool which I hope u are following. Now the same error was faced by me, U can just press the volume up key and connect the USB to your PC. Please note U have to hold the volume up key while connecting the USB. and leave immediately ( within 5 secs ) after the USB is inserted.
This has worked for me and 3 other friend's of mine. Best of luck.
Hit thanks If it helps u.

Mobile Bricked,Issue in Flashing

Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
Submitted my mobile at service center and they had reinstalled OS again. Got my mobile back again.:victory:

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
hey try meta mode with sp flash tool
remove your battery and hold both volume+power button to enter meta mode
with holding those buttons connect usb and click download in sp flash tool

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:

TECHVS said:
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
Click to expand...
Click to collapse
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:

Siddhesh.K15 said:
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Click to expand...
Click to collapse
yeah! siddhesh that's what happened with me power failure
and thanks for the information

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.

Hovatek said:
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Click to expand...
Click to collapse
Thanks a lot for the valuable info mate.:good::highfive:

its not working out after reinstalling the drivers... the same freak msg on sp tool that usb not recognized...

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
uninstall drivers and install updated mtk drivers,use latest sp flash tool, It wl work, I had same issue with my a117 device,now its working fine

[Q] Lenovo a369i - Cannot connect to my computer

So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted

Flash stock firmware back on.
I'm not home or I would search for links sorry.
In Google type your phone name + return to stock.
Sent from my LG-VS980 using XDA Premium 4 mobile app

1165
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!

PauloAgojo277 said:
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
Click to expand...
Click to collapse
To put the stock rom back on lenovo device, it must be powered off. (if it has a removable battery it must be removed).
preinstal the drivers into pc/laptop.
open device manager
plug in lenovo.
if device manager says 'mediatek,,,,' you are a winner & can use the sp flash tool included in the zipped rom to instal the rom.
if device manager says 'unknown device' you have 2 seconds to click on it & select update driver and a point to the downloaded lenovo driver (then it will be as above).
When you get green circle you are complete and may disconnect and put battery back in.

PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50094020
Here's a step by step guide ..please be aware of the steps .. That help me from bricking my phone almost so many times
Sent from my Lenovo A369i using XDA Free mobile app

If you are using windows 8 then you can't install USB drives
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
So if you are using windows 8 or higher version of windows then simply you have to degrade it to windows 7 or lower to install USB driver's

completely dead mi4i .. no led no recover no fastboot no charging animation .

hi ..
i flashed mokee official in my mi4i .. i used for 3-4 week. after 2 week i flashed crayon tweaks for stop charging n fast charging it was working great . then aftr 2 week i was using uc browser .. suddenly i got pop up google play store has stooped then play service .. then i hit home button .. and i got a pop up that mokkee launcher has stopped .. (15-20 times i got that unfortunatily mokee launcher has stopped) .. then phone automaticaly rebooted.
and it stuck on mokee animation .
i pressed vol up n power off for recovery . i thought if i do wipe data n cache then it will work and boot.. but when i pressed them buttons . it was turned off . and dint on ..
no charging animation
no led
not going in recovery
not going in fastboot
completely dead ..
anyone who can help in this situation???

Try to put it into Recovery Mode or Fastboot mode WHEN connected to A.C. Charging. if nothing appears You should approach Xiaomi Service Center ASAP.

Toruk.Makto said:
Try to put it into Recovery Mode or Fastboot mode WHEN connected to A.C. Charging. if nothing appears You should approach Xiaomi Service Center ASAP.
Click to expand...
Click to collapse
I tried bro .. also connected to pc n tried but nothing heppend no led no charging animation ..

It might got into QDL9008 mode, try installing the proper drivers and see if it gets detected. Might been hard bricked.

Hackerpunk1 said:
It might got into QDL9008 mode, try installing the proper drivers and see if it gets detected. Might been hard bricked.
Click to expand...
Click to collapse
When i connect to pc it sound . Like same when u connect a device ...
But not showing nothing...
And cant go in fastboot so cant install rom
And in command prompt no adb devices is showing ..
I think fully hard bricked ..
Yes i think u r right its in QDL9008 mode.
Cant open mi4i .. i think need to send to service centre ..

I sure there is a way out, try inboxing me and we'll see if something can be done.

Hackerpunk1 said:
I sure there is a way out, try inboxing me and we'll see if something can be done.
Click to expand...
Click to collapse
I dont know how to unboxing mi4i . Can tell me how to open back cover???

UniQ01 said:
I dont know how to unboxing mi4i . Can tell me how to open back cover???
Click to expand...
Click to collapse
Front
https://www.youtube.com/watch?v=Os16XJYi2aE

If the device is already in QDL9008, you don't need to open the device. You just need certain files and flash the emmc for reprogramming.

Hackerpunk1 said:
If the device is already in QDL9008, you don't need to open the device. You just need certain files and flash the emmc for reprogramming.
Click to expand...
Click to collapse
Bro can't install or flash .. bcz its not booting up not going in recovery . No fastboot mode . No charging no led showing

You need to use MiFlash, if with that it doesn't work, try using EMMC Download from QPST

Hackerpunk1 said:
You need to use MiFlash, if with that it doesn't work, try using EMMC Download from QPST
Click to expand...
Click to collapse
Need to put phone in fastboot mode for using miflash ...
Cant go in fastboot mode ... as i said in starting bro ..

Then you should try using EMMC from QPST, PM me, would be much better.

Hackerpunk1 said:
Then you should try using EMMC from QPST, PM me, would be much better.
Click to expand...
Click to collapse
Sorry bro for late reply
My phone was in service center
It was in warranty so now it's okay
But if in future I face same problem then I' ll ask to u for a solution
BTW thanks everyone who replied me

Has the phone been detected as QDL9008?

Need mi toll to flash your devices bro

Hackerpunk1 said:
Has the phone been detected as QDL9008?
Click to expand...
Click to collapse
Hi, My phone is hardbricked. No screen No fastboot No Recovery, But it is detected in device manager as Qualcomm HS- USB Diag. 9006. As you are saying in previous post, I need to flash some file in eMMC software. I downloaded it and installed it.
Can you please guide me further...
Thanks in Advance

HELP Dead Yu

can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...

Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply

my ph vibrt bt no display

Is your phone yu5010 or yu5010a

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
bro my yuphoria is also dead it doesn't even get detected by pc as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 bro help me!!!

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
Qfil is giving this error do you have any fix ??

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
i'm dumping YU5010A Emmc once it is done.i don't know if flashing it on SdCard will revive my dead Yuphoria incase it works i will upload it

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
tried it doesn't boots fastboot with sdcard

smh.saad said:
Qfil is giving this error do you have any fix ??
Click to expand...
Click to collapse
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro

satyabobby09 said:
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro
Click to expand...
Click to collapse
unable to connect to comPort error

smh.saad said:
unable to connect to comPort error
Click to expand...
Click to collapse
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
did u got COM Port error on windows 10 i got it on windows 8.1 nd 7

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??

smh.saad said:
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??
Click to expand...
Click to collapse
I had both yu5010A n you 5010CM. I'll give u the link soon(I'm at office. I'll upload or find u the link when I reach home.). I had problem with win 10. And one more thing you should boot in safe mode for unsigned drivers to install

View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543

satyabobby09 said:
View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543
Click to expand...
Click to collapse
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?

ravi2106 said:
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?
Click to expand...
Click to collapse
I have unbricked my device. The process needs to be followed properly

Have u revived u r yuphoria
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
Satyabobby09;
Can I get u r contact no plz so that I can get details regarding how to revive hard bricked yuphoria

satyabobby09 said:
I have unbricked my device. The process needs to be followed properly
Click to expand...
Click to collapse
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .

ravi2106 said:
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .
Click to expand...
Click to collapse
Yes you need qfil signed ROM n qpst. Also this is msm8916 so use msm8916.mbn
Guys follow this video its in Hindi hope this. Helps you
https://youtu.be/5qnr8bJ2Zso