Database Info

Bricked ur tipo/Problem in rooting/Want help on any topic Post Here!!!

Hi every one want help on ur Bricked tipo Or
Problem with Rooting or any thing u are facing
Feel Free and post here
I or any member might help You....
Xperia Miro And Xperia j users are also invited
Good Luck..:good:

help
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me

cannot boot after unlock bootloader and flashing
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Which build fxp are you using? Get latest, and use flashtool to fastboot kernel this time.
Some fxp build have boot.img problem.
Sent from my ST27i

joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
Click to expand...
Click to collapse
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..

i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".

tassosmer said:
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
Click to expand...
Click to collapse
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily

no ting done
nishuy21 said:
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
Click to expand...
Click to collapse
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:

nishuy21 said:
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
Click to expand...
Click to collapse
I tried this program yesterday but when i click "unlock BL" the program crashes.

joehoor said:
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
Click to expand...
Click to collapse
Try on other USB ports
Try it with other USB data cable..
Try seus to repair ur phone if still can not
Then I'm afraid u have some hardware problem and u should go to Sony service centreAnd the problem can be of ur pc try on
Other pc if problem persist than bad luck u need to go to SC
Also try to disabe all USB ports and than enable them again in device manager on pc and reboot...
Good luck and tell us further more....

tassosmer said:
I tried this program yesterday but when i click "unlock BL" the program crashes.
Click to expand...
Click to collapse
I looked a bit at ur problem and this is with many other people
And all of them donot have fastboot mode driver installed correctly
click on the start menu, then right click on my computer, then click on manage from the drop down list, then in the window that pops up on the left hand side click on device manager.if u see unknown source or exclamation mark when u connect ur device
U can see this link http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html for more description although it is for nexus but the process is same
Scroll down and see troubleshooting it might help u
Than ur drivers are not installed correctly
If drivers are installed than u must got a name like adb interface/bridge etc.
If this does not work than
Same as I said in above post
This problem can be caused by ur pc try this on any other pc
And install fastboot drivers or even u can use different USB ports some time USB ports donot work properly

Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!

tassosmer said:
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
Click to expand...
Click to collapse
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...

nishuy21 said:
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
Click to expand...
Click to collapse
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
nishuy21 said:
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
Click to expand...
Click to collapse
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me

rinkumeher said:
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me[/QUOTE
As long as you unlocked bootloader you lost warranty. Tomorrow i will go for bigger problem. I hope that the cost won't be too much.
Click to expand...
Click to collapse

tassosmer said:
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
Click to expand...
Click to collapse
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time

nishuy21 said:
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
Click to expand...
Click to collapse
The only life sign of tipo is the vibration when i turn it on. This happened once today and once yesterday night.

I need driver's download link for xperia
Tipo please
Sent from my ST21i using xda app-developers app

Please :( Bootloader died

On my L, accidently flashed xperia U's firmware, then rebooted and died :crying::crying::crying: what can I do? when trying to attach device in fastboot, flashboot mode, nothing happens. Please, please help me guys.
thanks

not solutions ? :crying::crying:

Steve Mc. Gregory said:
not solutions ? :crying::crying:
Click to expand...
Click to collapse
Try flash stock fw back..pull out battery with push power button about 3-5 sec then connect to flash..
If its failed then i guess goodbye to your device..

I'll Try. thanks for support

I too have same problem kindly give me some solution

Your device is dead.

grewal720 said:
I too have same problem kindly give me some solution
Click to expand...
Click to collapse
See possible solution stated above.
aleksander002 said:
Your device is dead.
Click to expand...
Click to collapse
Technically, a non organic thing can't die.
Send from da hood

i have tried but my phone doesn't get into flash mode or fastboot mode.

grewal720 said:
i have tried but my phone doesn't get into flash mode or fastboot mode.
Click to expand...
Click to collapse
Then it's dead, and the only thing you can do about it is send it to a service center.

Isn't there a way for xperia l to recover from hard brick like xperia z1 via test point or something bcz sending for repair will be very expensive and it would be better of buying a new phone.

Is it possible that device becomes totally unrecoverable(hard bricked) when i attempted to change partitions and went wrong.

bassil.alzoubi said:
hi
1-make sure you battery is charged
2-pull out battery for 10 minutes
3-connect your phone in flash mode (hold vol down button then connect usb cable
not work ?
try another usb cable another usb port
i dont think the phone will totally dead by flashing a wrong firmware but i think its a battery issue
Click to expand...
Click to collapse
Thanks for reply. it was port issue. data wasnt working

Guys
I had hard bricked X10. So use JTAG/REFF connection and rebuild your device. It's so hard, but I made it good luck

Hm ..
bassil.alzoubi said:
i told you try another usb port
and dont say thanks ....press it :good:
Click to expand...
Click to collapse
already pressed man thanks for useful reply :good:

Unable to start

My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:

sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
does download mode works @sarry86

mohsin931 said:
does download mode works @sarry86
Click to expand...
Click to collapse
Yes it does but stays for 3 or 4 seconds then it restarts

sarry86 said:
Yes it does but stays for 3 or 4 seconds then it restarts
Click to expand...
Click to collapse
flashing does not work in recovery?

mohsin931 said:
flashing does not work in recovery?
Click to expand...
Click to collapse
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now

sarry86 said:
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
Click to expand...
Click to collapse
how did it happened?

mohsin931 said:
how did it happened?
Click to expand...
Click to collapse
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now

sarry86 said:
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
Click to expand...
Click to collapse
it is hardbrick remove battery and connect to computer and tell me is it detected

mohsin931 said:
it is hardbrick remove battery and connect to computer and tell me is it detected
Click to expand...
Click to collapse
No nothing even in device manager

sarry86 said:
No nothing even in device manager
Click to expand...
Click to collapse
usb is not recognized did you got this message?

mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
Nothing but sometimes i get the message "USB only charge interface"

mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins

mohsin931 said:
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
Click to expand...
Click to collapse
Thanks bro i will try tomorrow and will let you know

If u still face the problem toss a new battery and check it ....or grab a old Nokia battery or which ever battery fits positive and negative connection in the phone. If the phone turns on its your BATTERY...ORIGINAL G PRO 2 BATTERY COSTS AROUND 180$ DO NOT BUY CHINESE KNOCK OFF......INFORMATION IS MEDICINE :good:
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
It's the battery problem even if the battery looks good toss a new one and check before doing all this stuffs

sarry86 said:
Thanks bro i will try tomorrow and will let you know
Click to expand...
Click to collapse
hello bro the problem u have now is u have custom recovery installed on your phone and u received ota update and the phone try to install the ota update so after that your phone cant boot ur phone the phone is bootloop . if that is the problem u have to install twrp recovery and go to terminal type this code dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota then after that reboot your phone. If i help u dont forget the thanks bottom :good:

[Guide] Unbrick Your UNLOCKED Lenovo P2a42

Hey Friends,
You must have seen very good days with Lenovo P2 but when there comes a bad day when your phone stops responding to button holds and restarts. You may or may not have a clue what to do to get your phone working again just like before.
I got into this situation where only thing my phone was able to operate was a RED LED on connecting it to my laptop. Then I had to read tens of pages on XDA to find answers to all my questions. If you are in such a situation and your phone is UNLOCKED then you have come to the right place. Procedure is quite simple but remember, I am writing this guide to define complete process from blackout to complete update so follow this guide as per your needs.
I faced this situation of Total Blackout / Dead Phone (Almost) with only Red LED working and it can be very scary. So, here is the simplest procedure you can follow. I want to appreciate all those people who helped me in finding a way to boot my phone with each and everything working. Long story short, let's get this done.
Tools Required:
I am mentioning here all the Tools you will need. I will urge you to download and save these tools in case you want to unbrick your phone any time:
1. Minimal ADB and Fastboot setup for PC
2. Lenovo USB drivers v1.1.33
3. Qualcomm USB Drivers
4. Qualcomm Flash Image Loader (QFIL) v2.0.1.9 for your PC in case you have corrupted your phone's IMEI and/ or Baseband
5. Blankflash.bat in case you want to recover from total blackout (Attached)
6. Stock MM S048 Firmware for Lenovo P2 in case phone doesn't boot
7. S048_ModemTelephony.zip in case your phone boots through Stock MM S048 but SIM isn't detected and IMEI is missing. I have made a complete modem zip file for installation through recovery.
8. S251_ModemTelephony.zip in case your phone is on latest firmware and doesn't detect SIM and has lost IMEI. I have made a complete modem zip file for installation through recovery.
9. QCN file for recovering baseband version and giving you most precious network signals. (Attached)
10. WinRAR or PeaZip for uncompressing files
I will recommend you to have a specific folder for keeping all these tools in a single place.
Procedure for Unbricking:
Before going with the procedure, make sure you have downloaded all the files you need, updated Lenovo and Qualcomm drivers etc. Here is the procedure:
1. If total blackout with red LED notification when connecting to PC: Unzip blankflash.zip to a folder in C drive. Now connect your P2 to PC through USB, press volume+, volume- and power button simultaneously and double click blankflash.bat. You might have no success in your first try. Just keep trying and it will load your phone to Fastboot. Restart your phone in TWRP if installed and install a working ROM for your phone after doing a wipe. If all is good and phone works OK then great but if you have lost IMEI and baseband then it is better to reinstate your phone through first MM stock ROM S048
2. Install S048 firmware through Minimal ADB and Fastboot - use flash instructions in .txt file.
3. Wait for startup of phone. Check if fingerprint, BT, WIFI and SIM work if all work then OK.
4. If fingerprint, BT, WIFI and SIM are not working then check IMEI through dialer. Dial *#06#. If IMEI is not available then install latest TWRP through Fastboot.
5. Start P2 in TWRP recovery and install S048_ModemTelephony.zip. Restart phone to see if WIFI and SIM work.
6. If SIM is detected but not giving signals and Baseband is shown as unknown then extract 000000_0.qcn file given in .7z and restore through QFIL and restart your phone into Fastboot.
7. Now, install stock recovery of S048 firmware through Fastboot and restart your phone.
8. Use your phone like you normally do and update your P2 till firmware S251 and see if everything works including calls. Update your phone through OTA.
9. After OTA installation, stock recovery may say that update failed. Just press Back, go into Wipe user data menu and Wipe Cache only. Restart your phone which will be updated to latest version and will ask you to update to a newer version. Allow it to download the next update.
10. After installation of S251 update, install latest TWRP through Fastboot and install most recent version of LOS 16 so that your vendor partition is stable and free from any bloated files. Now, use your phone just like you want to.
If you need further clarification then ask in this thread.

Bro my phone is not unlocked can i try thz one

Ranji007 said:
Bro my phone is not unlocked can i try thz one
Click to expand...
Click to collapse
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.

alirazaagha said:
You should download S048 and use flashall.bat inside that archive to install it all. However, if you lose IMEI or baseband then you can use modem and qcn files given in this thread.
Click to expand...
Click to collapse
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing

Ranji007 said:
Bro now i wanna use ...minimal adb ..my phone is totally bricked only red light glowing
Click to expand...
Click to collapse
don't worry just flash blank flash from the link given in the op, you will get the bootloader back

hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Bro how to connect my phone to blank flash...can u PLZZ help

hackiee said:
don't worry just flash blank flash from the link given in the op, you will get the bootloader back
Click to expand...
Click to collapse
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea

Ranji007 said:
Laptop is not detecting my device bro i installed all lenovo and Qualcomm drivers...any idea
Click to expand...
Click to collapse
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.

alirazaagha said:
If red light blinks, your phone can be detected by your laptop. Check ports in device manager settings and you'll see a new port with Qualcomm 9800 series number. If that's there, try blankflash to start in fastboot. It might need some tries before startup. Be patient and keep trying till you are in fastboot.
Click to expand...
Click to collapse
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?

Ranji007 said:
Bro ..thanks for reply....in my phone red blink is glowing continuously ..but after connecting there is no change...can u say which buttons i want to press?
Click to expand...
Click to collapse
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.

alirazaagha said:
Press Volume+, Volume- and Power simultaneously and double click flashblank.bat. It might take some tries to finally install the scripts and start phone in fastboot. It took me 20+ tries to finally detect my phone through blankflash. Please, read OP completely.
Click to expand...
Click to collapse
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??

Ranji007 said:
Bro we want to connect each time removing usb cable and connect again like that ..we wanna do 20 times??
Click to expand...
Click to collapse
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.

alirazaagha said:
No. Keep USB connected. Try blankflash. If it doesn't detect phone or go ahead. Close command terminal, double click again and keep doing it till it processes the files. If it is stuck somewhere. Close terminal and try again.
Click to expand...
Click to collapse
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...

Ranji007 said:
Bro is there any solution ..i continuously pressed volume and power buttons connected to laptop and opening blank flash continuously for number of times ...but there was no reaction...only waiting for device is showing ? on my pc ...
Click to expand...
Click to collapse
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.

alirazaagha said:
Check if your USB cable is alright and appropriate drivers are installed. Otherwise reinstall drivers, restart your PC and try again.
Click to expand...
Click to collapse
Bro we want to change any settings in device manager ...?

Ranji007 said:
Bro we want to change any settings in device manager ...?
Click to expand...
Click to collapse
No. Just update drivers.

alirazaagha said:
No. Just update drivers.
Click to expand...
Click to collapse
Bro when u take to service center they said for u motherboard problem or something??

Ranji007 said:
Bro when u take to service center they said for u motherboard problem or something??
Click to expand...
Click to collapse
Fortunately, I never took it there.

alirazaagha said:
Fortunately, I never took it there.
Click to expand...
Click to collapse
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ?..iam trying thiz method

Ranji007 said:
My phone was fallen in water then i changed the display..few days after it stopped working ..and when i take to serive centre they said to change motherboard..but it's the 80% of phone price...so iam here ..iam trying thiz method
Click to expand...
Click to collapse
I think you might have damaged some hardware. But anyway if you want to use blankflash, I have a method.
In lenovo p2 we have another mode called QDloader mode, in which we can use blankflash. For entering into this mode, it's little tricky but, can enter in one or two go.
So, here's how:
1. Switch off the mobile.
2. Press the volume up key,
3. While holding the volume up key, insert the usb cable and at the same time press the power button (this is the trick, we have to insert and hit at the same time).
And voila! :highfive: you will see black screen with only red notification led blinking.
we are into QDloader mode. Now use blankflash :good:

Question hard bricked

can somebody provide me files of firehose and patch file for my device

gagan.gowdaaa said:
can somebody provide me files of firehose and patch file for my device
Click to expand...
Click to collapse
could you provide details about how your device is hard bricked? Are you able to boot into download mode?

barryallen3038 said:
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
Click to expand...
Click to collapse
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state

gagan.gowdaaa said:
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
Click to expand...
Click to collapse
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?

barryallen3038 said:
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
Click to expand...
Click to collapse
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver

gagan.gowdaaa said:
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
Click to expand...
Click to collapse
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..

barryallen3038 said:
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
Click to expand...
Click to collapse
thank you so much for helping me sir ;0

gagan.gowdaaa said:
thank you so much for helping me sir ;0
Click to expand...
Click to collapse
No problem man. Did you manage to unbrick it?