Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
Submitted my mobile at service center and they had reinstalled OS again. Got my mobile back again.:victory:
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
hey try meta mode with sp flash tool
remove your battery and hold both volume+power button to enter meta mode
with holding those buttons connect usb and click download in sp flash tool
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
TECHVS said:
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
Click to expand...
Click to collapse
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Siddhesh.K15 said:
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Click to expand...
Click to collapse
yeah! siddhesh that's what happened with me power failure
and thanks for the information
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Hovatek said:
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Click to expand...
Click to collapse
Thanks a lot for the valuable info mate.:good::highfive:
its not working out after reinstalling the drivers... the same freak msg on sp tool that usb not recognized...
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
uninstall drivers and install updated mtk drivers,use latest sp flash tool, It wl work, I had same issue with my a117 device,now its working fine
Related
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
fugitive_4u said:
Hi,
I tried to update stock JB and I had ICS v2 rooted Micromax A110.
Half way through it threw an error by saying Invalid FORMAT syntax or something of that sort after successfully copying files.
Now my phone
doesnt start
cannot go into recovery
There are no light blinking
Computer doesnt identify when connected
IT IS TRULY BRICKED..!!
Is there any alternative apart from taking it to service center?
Cheers
Fugitive
Click to expand...
Click to collapse
May i know which procedure you tried for updation through SP flash tool or through cwm....
BOND1987 said:
May i know which procedure you tried for updation through SP flash tool or through cwm....
Click to expand...
Click to collapse
Thanks for replying..
Used SP Tool v3.1224.
Cheers
Fugitive
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
stealthroot said:
Try to flash V2 rom via SP tool again if it doesnt work you have to take it to the Service center and btw which os do you use for pc?
Click to expand...
Click to collapse
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
fugitive_4u said:
When switched off and connected to a power source, I dont even see the battery symbol. SP Tool doesnt recognise the phone from two machines I tried (one win 7 32-bit and another win7 64-bit).
Let me know if there are any other options I can try
Cheers
Fugitive
Click to expand...
Click to collapse
Uninstall the drivers of micromax /cyanus t2 if you have installed it check it via the device manager and install the drivers again try to flash it !
Thanks..!
Guys,
Many thanks for all the help and input.
I had to take it to Service Center in Bangalore. It was totally bricked and I explained them whatever I did honestly
They said my warranty would be void and they were still not aware if MMX had released a JB version and asked me to come 3 days later. Today I went in and lo behold my A110 was updated to JB and also warranty was not void. Nice people at support I say.
Now, me being me, within hours of getting my phone, I updated to CWM Recovery and rooted the phone
Cheers folks
Fugitive
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
ravnit said:
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
Click to expand...
Click to collapse
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
nikhilmendu said:
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I dont mind giving a Thanks but none of the above drivers work and they have a yellow exclamation on them in device manager.. :'(
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
salil is right..
uninstall previous drivers use Revo unintaller as it removes the traces as well..
Then flash CWM through SPFlash tool!
Well if you aren't rooted you can't use Mobile Uncle Tool!
.salil. said:
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanks for your advice mate.. although Skyrazor is right as root is required for Mobile uncle tools..
Im going to reinstall all drivers and let you know what the outcome is.
Thanks for your time
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Try META MODE......!
flash mobile by removing battery
1.remove battery and hold volume + button
2.then connect to pc then flash it through sp tool
abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
demongokul said:
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
Click to expand...
Click to collapse
No i m using Windows 7
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
revanth22 said:
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
Click to expand...
Click to collapse
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
dont worry its a simple problem
check this post it will help u
http://forum.xda-developers.com/showthread.php?t=2180436
Buddy no problem with Windows 8.
It works fine i am using it. Just follow this procedure to install proper drivers.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
Solution
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
Bro, follow all the steps of using SP Flash tool which I hope u are following. Now the same error was faced by me, U can just press the volume up key and connect the USB to your PC. Please note U have to hold the volume up key while connecting the USB. and leave immediately ( within 5 secs ) after the USB is inserted.
This has worked for me and 3 other friend's of mine. Best of luck.
Hit thanks If it helps u.
Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either
anup.antony123 said:
Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either
Click to expand...
Click to collapse
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck
navtab said:
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck
Click to expand...
Click to collapse
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
i think the issue is driver were not installed properly on pc. use moborobo universal driver kit software for pc
Don't panic bro. Driver may not have installed properly. Please reinstall it
anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
1. Power off the device and remove the battery(don't connect to pc juz switch off)
2. Open device manager in pc(control panel -> hardware and sound -> device manager)
3. Double click Ports(COM & LPT). It will show some COM ports available
4. Now connect your phone to pc
5. A new device appears in ports tray named something like Mediatek device(not the full name i cant remember now). It will appear for only few seconds. Before it disappears quickly right click on it and click properties
6. In the properties window goto Driver tab and click Update driver
7. A new window pops out, in that select "Browse my computer for driver software"
8. Now browse for the folder u have the a117 drivers and proceed. Windows will install the drivers.
9. Disconnect the phone and restart the pc
10. Open SP Flash Tools(try latest possible version) with adminstrator privilages, select the scatter loading and browse for the file in stock rom folder and click "Download"
11. Connect ur phone and sp tools will detect the device and wait for the process to complete.
Gud luck :good: :good:
a117 bricked
my a117 is stuck on mmx logo...pls help asap...any video tutorial or proper step by step procedure wud be appreciated as ive nvr done flashng thru sp before...thanks ..help anyone asap
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Just install Telegram
And visit
https://t.me/LeecoUnofficial
thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop
Try vcom driver mobistel
sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?
[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked
santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.
Try this method
youtu.be/-KSExDz_78E
Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?
Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172