Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either
anup.antony123 said:
Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either
Click to expand...
Click to collapse
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck
navtab said:
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck
Click to expand...
Click to collapse
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
i think the issue is driver were not installed properly on pc. use moborobo universal driver kit software for pc
Don't panic bro. Driver may not have installed properly. Please reinstall it
anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
1. Power off the device and remove the battery(don't connect to pc juz switch off)
2. Open device manager in pc(control panel -> hardware and sound -> device manager)
3. Double click Ports(COM & LPT). It will show some COM ports available
4. Now connect your phone to pc
5. A new device appears in ports tray named something like Mediatek device(not the full name i cant remember now). It will appear for only few seconds. Before it disappears quickly right click on it and click properties
6. In the properties window goto Driver tab and click Update driver
7. A new window pops out, in that select "Browse my computer for driver software"
8. Now browse for the folder u have the a117 drivers and proceed. Windows will install the drivers.
9. Disconnect the phone and restart the pc
10. Open SP Flash Tools(try latest possible version) with adminstrator privilages, select the scatter loading and browse for the file in stock rom folder and click "Download"
11. Connect ur phone and sp tools will detect the device and wait for the process to complete.
Gud luck :good: :good:
a117 bricked
my a117 is stuck on mmx logo...pls help asap...any video tutorial or proper step by step procedure wud be appreciated as ive nvr done flashng thru sp before...thanks ..help anyone asap
Related
Hello,
Few months ago , the power button of my nexus s had broken. I used volume rocker and I could turn on the screen.
Today I tried to flash a rom . I have done this before many times and I know the process.
After I had wiped all the data ( system , faxtory reset, cache) , I pulled off the battery.
When the phone starts it stucks on google logo , because there is no rom in it.
When I boot it into the fastboot mode , my pc cannot recognize it at all, I plug it in my pc and there is no sign that a new hardware has been installed.
I don't know what else to do. If I could get it recognized by my pc , I would be able to silve the problem.
Any suggestions on how can I fix it? Can I fix the fastboot mode problem????
Thanks for your time
I am looking forward hearing your replies...
If you don't have this installed on your PC already, you should install it and follow the directions for installing the drivers carefully. It worked for me.
P.S. this thread belongs in Q&A
Thanks for the reply but it cannot do anything. I posted here so as I can get help from developers who know more stuff than other users.
unless your thread is about ANDROID DEVELOPMENT ... IE your own ROM / KERNEL / MOD etc... it should be in q and a or general.
OP that is not how it works, posting in the Development Section because you believe the help is great there....WRONG! Sir, you will find the best help is in the proper place in the proper Threads....Please familiarize yourself with the Forum Rules on Posting. Thank You and Moved here.
When you connect your phone to your PC while it's in fastboot mode, if you haven't tried already, go to device manager (assuming your pc is running windows), there should be an unrecognized device in the list, if so you can right click on it and choose update driver, then select driver manually and navigate to the data/drivers folder where ever you have Wug's tool installed (if you don't have it installed then you should), that should properly install the drivers and allow your computer to recognize the phone, then you can use the flash stock+unroot option to repair your phone.
If you don't see any change in device manager when your phone is connected to your computer then I can't help much, maybe try a different usb port if you haven't already.
Good luck
jj_z1 said:
When you connect your phone to your PC while it's in fastboot mode, if you haven't tried already, go to device manager (assuming your pc is running windows), there should be an unrecognized device in the list, if so you can right click on it and choose update driver, then select driver manually and navigate to the data/drivers folder where ever you have Wug's tool installed (if you don't have it installed then you should), that should properly install the drivers and allow your computer to recognize the phone, then you can use the flash stock+unroot option to repair your phone.
If you don't see any change in device manager when your phone is connected to your computer then I can't help much, maybe try a different usb port if you haven't already.
Good luck
Click to expand...
Click to collapse
There are no changes when I plug in the phone, I tried all the usb ports , other pc and other new cable but nothing work.
Thanks for the reply
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
ravnit said:
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
Click to expand...
Click to collapse
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
nikhilmendu said:
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I dont mind giving a Thanks but none of the above drivers work and they have a yellow exclamation on them in device manager.. :'(
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
salil is right..
uninstall previous drivers use Revo unintaller as it removes the traces as well..
Then flash CWM through SPFlash tool!
Well if you aren't rooted you can't use Mobile Uncle Tool!
.salil. said:
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanks for your advice mate.. although Skyrazor is right as root is required for Mobile uncle tools..
Im going to reinstall all drivers and let you know what the outcome is.
Thanks for your time
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
Submitted my mobile at service center and they had reinstalled OS again. Got my mobile back again.:victory:
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
hey try meta mode with sp flash tool
remove your battery and hold both volume+power button to enter meta mode
with holding those buttons connect usb and click download in sp flash tool
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
TECHVS said:
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
Click to expand...
Click to collapse
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Siddhesh.K15 said:
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Click to expand...
Click to collapse
yeah! siddhesh that's what happened with me power failure
and thanks for the information
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Hovatek said:
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Click to expand...
Click to collapse
Thanks a lot for the valuable info mate.:good::highfive:
its not working out after reinstalling the drivers... the same freak msg on sp tool that usb not recognized...
AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
uninstall drivers and install updated mtk drivers,use latest sp flash tool, It wl work, I had same issue with my a117 device,now its working fine
I wanted to wipe user data , so I googled for that to make a hard reset from bootloader and I found some steps :
1) Turn Off handset .
2) Press Up volume and connect to the computer through USB .
My mobile led went blue , but the computer gave me "device not recognized " message .
so I pressed Power Button to exit this mode , The led went off but the mobile didn't responde.
the screen is black and the mobile not responding Since then .
When I connect it to the computer it recognize that a usb device is plugged but with the message " device not recognized"
Tried many things , like press down volume and connect , or down volume and power , down,up and power ... etc , and nothing works .
Can any one help please
Hey did you even install the fastboot driver for xperia z3?
yeah the one that called Emma .
and another one called (Flashtool) but still my windows can't recognize it .
windows 8.1 by the way .
u might need to install the driver provided by flashtools.
installing non certified drivers are bit tricky on win8 & later which u need to reboot in special mode.
or maybe pc companion include that driver.
monx® said:
u might need to install the driver provided by flashtools.
installing non certified drivers are bit tricky on win8 & later which u need to reboot in special mode.
or maybe pc companion include that driver.
Click to expand...
Click to collapse
EMMA is not non certified.
But the drivers can also be found on internet in a form of an .exe application.
I did installed the drivers in windows test mode , Still the same it can't recognize my phone .
i.dakrory said:
I did installed the drivers in windows test mode , Still the same it can't recognize my phone .
Click to expand...
Click to collapse
u need to choose Disable driver signing enforcement in Advanced options. please refer
Code:
http://revryl.com/2013/08/06/install-unsigned-drivers/
i've downgraded my PC to Win7 instead so i cant guide for step by step.
Thank you every one for trying to help
The problem solved by itself , the phone battery got empty from last night , when I charged it the phone worked normally .
Now I need to reset the phone and normal factory reset don't delete every thing (pics, sms ... etc) still exists .