Database Info

[Q] Urgent Help needed

Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.

When connected its showing charging and in device manager-->other devices showing CDC Serial & LGE COSMO USB Device

Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920

OS_Hacking said:
Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920
Click to expand...
Click to collapse
Thanks a lot for the reply.
I tried but nothing happening..its not detecting as usb to change port to 41.
Is there any other way?? Also for flashing when i insert battery and press volume up and then connect it starts and shows LG logo and goes blank.

It is not showing in PORT in device manager when connected pressing volume + button

Does the phone go to download mode ("S/W upgrade mode ) ?? By insert the battery while you hold vol+ ??
You will see two arrows like the sync symbol in your phone screen . And then the phone will still connected with the PC .
Your problem is easy to fix . Just try to enter download mode . And every thing will be fine .
Good Luck
Sent from my LG-P920

No its not going into download mode. COM is not detecting it.

[email protected] said:
No its not going into download mode. COM is not detecting it.
Click to expand...
Click to collapse
Try hold power on and the vol+ together , then plug it with the PC . Then insert the battery .
Sent from my LG-P920

[email protected] said:
Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.
Click to expand...
Click to collapse
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!

boltthrower56 said:
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!
Click to expand...
Click to collapse
Thanks a lot for the help and i really appreciate your willingness to take me out of this trouble, Thanks again

Everything worked fine till step 9..But still not showing anything in Ports

Make sure the drivers are correctly installed. Especially omap4430...
Start the script that has been referred to in the guide.
Shut down the phone , remove the battery , plug usb cable and when you see "waiting for 5 seconds" plug in the battery. That should work.
Keep me posted.
Sent from my LG-P920 using xda app-developers app

Its showing s/w update image in phone but getting message USB device not detected in PC

Thanks alot boltthrower56 .
Finally able to recover my phone and restored 3 month old backup.
By the way may i know your real name .
Can you please help me with upgrading to ICS?

[email protected] said:
Its showing s/w update image in phone but getting message USB device not detected in PC
Click to expand...
Click to collapse
That may mean you have a bad cable.
But if you restored it , it's probably sometimes bad or you changed it or you used the front panel which is a hub (divides bandwidth , slows flashing process) and it's bad for ya.
Since my real name is turkish and hard to spell i'll give one better ;
Call me John.
If you must know my real name is "Dogukan".
And yes i can help you with that although it's relatively easy now that you got a hold of it.

Thanks a lot Dogukan..
Are you into android development? Am a real noob in this and you helped me coming out of really difficult situation.
Now i want to root my phone and everytime its showing 'error no device find'

I'm not into android development... my skills lie in networking so there is not much i can do for android.
But those are common knowledge...
I bricked my phone several times to learn those.
You don't need to root. Follow wkpark's recovery installation and flash a custom rom (Darkroom int is great)
Sent from my LG-P920 using xda app-developers app

[Q] Stop Being Arrogant and help me a bit please?

Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))

ravnit said:
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
Click to expand...
Click to collapse
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium

nikhilmendu said:
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I dont mind giving a Thanks but none of the above drivers work and they have a yellow exclamation on them in device manager.. :'(

Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium

salil is right..
uninstall previous drivers use Revo unintaller as it removes the traces as well..
Then flash CWM through SPFlash tool!
Well if you aren't rooted you can't use Mobile Uncle Tool!

.salil. said:
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanks for your advice mate.. although Skyrazor is right as root is required for Mobile uncle tools..
Im going to reinstall all drivers and let you know what the outcome is.
Thanks for your time

[Q] Help!!! SGH T679 Cant go into Recovery Mode

Hello, this is my first post in XDA and i would like to thank everyone for making all these resources and information available online.
Ok here is the story:
I was trying install SlimBean 4.2.2 from http://forum.xda-developers.com/showthread.php?t=2185107 on my SGH-T679. I had TWRP on the phone. The problem came with the gapps( well not sure the download link is not working) i could not find the gapps for the rom. Every time i flash, after rebooting some of the apps were not working correctly..eg it keep saying calender storage is not responding. So the phone was sluggish and kept freezing.
I tried re-flashing with the latest gapps 4.4.2 on the SlimBean official website but it was not working correctly either cause the rom was version 4.2.2 and UNOFFiCIAL.
So i decided i tried the previous gapps in this thread to http://forum.xda-developers.com/showthread.php?t=2029362 and reflash it. now After rebooting and the phone start up, it got stuck in " unfortunately the process com.google.prosess.gapps has stopped'..then i press ok...it gives unfortunately setup wizard has stopped and keeps saying that forever
i thought it was no big deal:silly: i just reflash it again but now i cannot go in recovery mode anymore. Everytime i reboot the phone and press V+ it does nothing... it just continue...show the SlimBean logo and get stuck in the setup wizard thing. I even connected the phone my computer , i cant access the exter sd card folder either..
The only thing that is still working is the download mode .. when i reboot the phone and press v- it does go to download mode.
So guys what course of actions should i take to resolve this issue? I cant fasboot to reinstall the recovery cause my computer (windows 8.1) cannot correctly detect my phone when it is not working. do i need to download odin?
I would appreciate any help

Marcatus said:
Hello, this is my first post in XDA and i would like to thank everyone for making all these resources and information available online.
Ok here is the story:
I was trying install SlimBean 4.2.2 from http://forum.xda-developers.com/showthread.php?t=2185107 on my SGH-T679. I had TWRP on the phone. The problem came with the gapps( well not sure the download link is not working) i could not find the gapps for the rom. Every time i flash, after rebooting some of the apps were not working correctly..eg it keep saying calender storage is not responding. So the phone was sluggish and kept freezing.
I tried re-flashing with the latest gapps 4.4.2 on the SlimBean official website but it was not working correctly either cause the rom was version 4.2.2 and UNOFFiCIAL.
So i decided i tried the previous gapps in this thread to http://forum.xda-developers.com/showthread.php?t=2029362 and reflash it. now After rebooting and the phone start up, it got stuck in " unfortunately the process com.google.prosess.gapps has stopped'..then i press ok...it gives unfortunately setup wizard has stopped and keeps saying that forever
i thought it was no big deal:silly: i just reflash it again but now i cannot go in recovery mode anymore. Everytime i reboot the phone and press V+ it does nothing... it just continue...show the SlimBean logo and get stuck in the setup wizard thing. I even connected the phone my computer , i cant access the exter sd card folder either..
The only thing that is still working is the download mode .. when i reboot the phone and press v- it does go to download mode.
So guys what course of actions should i take to resolve this issue? I cant fasboot to reinstall the recovery cause my computer (windows 8.1) cannot correctly detect my phone when it is not working. do i need to download odin?
I would appreciate any help
Click to expand...
Click to collapse
Odin is the way

LS.xD said:
Odin is the way
Click to expand...
Click to collapse
ok ...but how do i proceed with this?
last time i downloaded Odin it was not working ...it could not detect my phone so i could not do anything.
is there some drivers i need to download in addition,,,i did tried Kies but its useless for my phone
I gonna try to follow these directions again http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539

Marcatus said:
ok ...but how do i proceed with this?
last time i downloaded Odin it was not working ...it could not detect my phone so i could not do anything.
is there some drivers i need to download in addition,,,i did tried Kies but its useless for my phone
I gonna try to follow these directions again http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Click to expand...
Click to collapse
Uninstall KIES ! Keep the drivers

LS.xD said:
Uninstall KIES ! Keep the drivers
Click to expand...
Click to collapse
It still can't detect my phone in download mode despite i installed the drivers...i probably need to have windows 7
Aslo can i install TWRP latest version 2.7.0.0 on my phone sgh t679? I previously had 2.5.0.0
And how do i get the 'tar' file?

What's your windows versionnow?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
Get the firmware from Samsung-Updates.com
Sent from my beloved HTC One S using (most time buggy) Tapatalk

LS.xD said:
What's your windows versionnow?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
Get the firmware from Samsung-Updates.com
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
i have windows 8.1 now
Alright i'm download the drivers in Samsung-Updates and see it can work
What about the tar file: i need tar file for cwm or twrp

Marcatus said:
i have windows 8.1 now
Alright i'm download the drivers in Samsung-Updates and see it can work
What about the tar file: i need tar file for cwm or twrp
Click to expand...
Click to collapse
Samsung-Updates.com provides the full firmware as tar file flashable via odin.

Alright, i downloaded a 335mb zip file on samsung update for my phone
It has the MD5 file and a SS_DL.dll
is the dl the driver.. do i install it manually?

LS.xD said:
Samsung-Updates.com provides the full firmware as tar file flashable via odin.
Click to expand...
Click to collapse
So...i have the md5 file to flash but my laptop still cant recognize my phone
I tried to manually install the dll file by putting in it in the System32 folder and doing regsvr32.exe your_dll.dll in command promt but it only gives me an error.
I guess my only hope is to install windows 7 and it work...
anyone have have some suggestion
I would appreciate the help

Marcatus said:
So...i have the md5 file to flash but my laptop still cant recognize my phone
I tried to manually install the dll file by putting in it in the System32 folder and doing regsvr32.exe your_dll.dll in command promt but it only gives me an error.
I guess my only hope is to install windows 7 and it work...
anyone have have some suggestion
I would appreciate the help
Click to expand...
Click to collapse
Did you use THIS this drivers?

LS.xD said:
Did you use THIS this drivers?
Click to expand...
Click to collapse
Yeah I tried this driver before.. after reboot and I plug my phone
it says usb connected then a window pop up saying installing driver for this device,,,,and stay stuck there forever. No matter how much time I wait for it to install the goddam driver it never completes it.
So yeah...as for the abd interface driver , I downloaded it. do I need to do something specific with it? I already have the adt bundle on the laptop

Marcatus said:
Yeah I tried this driver before.. after reboot and I plug my phone
it says usb connected then a window pop up saying installing driver for this device,,,,and stay stuck there forever. No matter how much time I wait for it to install the goddam driver it never completes it.
So yeah...as for the abd interface driver , I downloaded it. do I need to do something specific with it? I already have the adt bundle on the laptop
Click to expand...
Click to collapse
Go to device manager and installing the driver manually instead of automatic should solve your issue

[Completed] Karbonn sparkle V :android one stock recovery

At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .

ranjand said:
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like this may be an issue with finding the correct drivers for your phone. I found this post which may help you
https://forum.xda-developers.com/showpost.php?p=68372526&postcount=4
Good Luck
Sawdoctor

my le1s eco is dead....computer is not detecting my phone

due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone

Just install Telegram
And visit
https://t.me/LeecoUnofficial

thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop

Try vcom driver mobistel

sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..

Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]

Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?

[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.

mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked

santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers

Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.

Try this method
youtu.be/-KSExDz_78E

Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?

Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172