Database Info

NEXUS S not turning on..

Hi Guys,
My nexus s this morning was on nexus splash screen when i woke up, i remove the battery and tried to turn it on but it stock on google logo all along up to this time.
I had able to flash and restore it successfully with nandroid/rom with no errors, but still when i reboot it stock on google logo..
I had everything in place my phone is rooted with cwm recovery.

emorej said:
Hi Guys,
My nexus s this morning was on nexus splash screen when i woke up, i remove the battery and tried to turn it on but it stock on google logo all along up to this time.
I had able to flash and restore it successfully with nandroid/rom with no errors, but still when i reboot it stock on google logo..
I had everything in place my phone is rooted with cwm recovery.
Click to expand...
Click to collapse
I think you must flash stock rom.What model you have?i9020 or i9023 and what cwm version?

afilopou said:
I think you must flash stock rom.What model you have?i9020 or i9023 and what cwm version?
Click to expand...
Click to collapse
it has grh78 the super amoled one i think i9020.cwm v3.0.0.5..i already reflashed to stock rom but when i reboot it still stays on google logo..

emorej said:
it has grh78 the super amoled one i think i9020.cwm v3.0.0.5..i already reflashed to stock rom but when i reboot it still stays on google logo..
Click to expand...
Click to collapse
You flashed through Odin the bootloader,pda,modem and csc?

afilopou said:
You flashed through Odin the bootloader,pda,modem and csc?
Click to expand...
Click to collapse
no i did not use odin.. i used cwm only

emorej said:
no i did not use odin.. i used cwm only
Click to expand...
Click to collapse
Go here http://www.samfirmware.com/apps/auth/login?why=pw&try=1&wp=1&next=WEBPROTECT-i9020.htm
if you dont have acct just register.Download the proper firmware ( you will find Odin and a pdf with instructions as well).Make sure you installed samsung drivers on your pc, and in order to be in download mode power off your phone hold it between volume up and volume down (in the middle) and at the same time connect it through usb to your pc (on phone screen you ll see a yellow triangle with an android digging

afilopou said:
Go here http://www.samfirmware.com/apps/auth/login?why=pw&try=1&wp=1&next=WEBPROTECT-i9020.htm
if you dont have acct just register.Download the proper firmware ( you will find Odin and a pdf with instructions as well).Make sure you installed samsung drivers on your pc, and in order to be in download mode power off your phone hold it between volume up and volume down (in the middle) and at the same time connect it through usb to your pc (on phone screen you ll see a yellow triangle with an android digging
Click to expand...
Click to collapse
Thanks. which are the samsung drivers, are those installed when i used android sdk?

emorej said:
Thanks. which are the samsung drivers, are those installed when i used android sdk?
Click to expand...
Click to collapse
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929

afilopou said:
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
i think i have those drivers already..anyway the link that you gave me does not work. i have a question, when i try to install stock 2.3.3 rom im getting installation aborted error, do you know how to buypass that?

afilopou said:
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
Where can i get or what is the password when extracting the downloaded rar file?

emorej said:
i think i have those drivers already..anyway the link that you gave me does not work. i have a question, when i try to install stock 2.3.3 rom im getting installation aborted error, do you know how to buypass that?
Click to expand...
Click to collapse
maybe xda down?
here the original
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Does Odin recognize your phone?what version of windows you have?

emorej said:
Where can i get or what is the password when extracting the downloaded rar file?
Click to expand...
Click to collapse
Firmware
http://hotfile.com/dl/107982455/033fcd6/I9020XXJK1.rar.html
password samfirmware.com
Odin http://hotfile.com/dl/107607762/640950b/I9003_Odin3_v1.82.rar.html
pdf http://www.samfirmware.com/I9023 Flasghuide English.pdf

afilopou said:
maybe xda down?
here the original
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Does Odin recognize your phone?what version of windows you have?
Click to expand...
Click to collapse
i manage to get into downloading state. can you give me step by step process because on the pdf file its not accurate..thanks!

emorej said:
i manage to get into downloading state. can you give me step by step process because on the pdf file its not accurate..thanks!
Click to expand...
Click to collapse
when i got to downloading state the one withe "digging", the usb succesfully installed, but i forgot to extract odin so i cancelled it. i repeated the process and when i run odin it did not detect the phone..one more thing on which step will i used the I9020XXXJK1.rar which i extracted with password..

emorej said:
when i got to downloading state the one withe "digging", the usb succesfully installed, but i forgot to extract odin so i cancelled it. i repeated the process and when i run odin it did not detect the phone..one more thing on which step will i used the I9020XXXJK1.rar which i extracted with password..
Click to expand...
Click to collapse
Ok lets go.
First thing first you must make your pc recognized as samsung nexus s.If you are in download mode, pull the battery.go to bootloader (vol up+power), connect your phone to your pc and go to your device manager.what are you getting there?

afilopou said:
Ok lets go.
First thing first you must make your pc recognized as samsung nexus s.If you are in download mode, pull the battery.go to bootloader (vol up+power), connect your phone to your pc and go to your device manager.what are you getting there?
Click to expand...
Click to collapse
Hi i manage to flash it and it PASS! but why its still in google logo screen, shall i reboot it?

emorej said:
Hi i manage to flash it and it PASS! but why its still in google logo screen, shall i reboot it?
Click to expand...
Click to collapse
you put on odin the Bootloader,pda,phone and csc files?

afilopou said:
you put on odin the Bootloader,pda,phone and csc files?
Click to expand...
Click to collapse
yes i did put everything, i downloaded the phone modem separately coz its not included on the link that you gave to me..

emorej said:
yes i did put everything, i downloaded the phone modem separately coz its not included on the link that you gave to me..
Click to expand...
Click to collapse
try this
http://hotfile.com/dl/107916083/9cd3ccd/I9020XXJK1-_GRH78.rar.html
check on your device manager that the phone is recognized from your pc as nexus s

if you cant fix, you have 1 year factory warranty from Samsung.
my phone got ****t too ! ( every morning phone in charge, lights ON, black screen,and little wight point in middle of screen....when i remove battery and put it back it's help, but phone everyday start do increasingly same thing....)
I send to samsung repair center, they said it's gonna take around 7 business day ....the phone still there.)

[Q] I've tried everything to get out of boot loop

Hello everybody,
I am new to the forum and also new to Androids. After years of using iPhones and finally becoming fed up Apple, I've decided to try something new (please don't judge my prior smartphone selection and start posting opinions about the 2 operating systems, I do not want this thread to turn into one of the "battle of the phones" thread that I've experienced many times on iPhone forums). My friend recently got an S3 and had no use for his Galaxy S 4g, so he gave it to me so that I could try out an Android. There was one issue though, he said that the phone would not get past the Galaxy S screen and would keep re-booting itself (stuck in a boot loop). He said if I could figure out a way to fix it then it's mine.
That being said, here's my dilemma. I've tried many different methods to get the phone out of a boot loop. The first method I tried was putting the phone into restore mode and selecting the "reinstall packages" option. After this executes I get the message:
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
After some further research I discovered a nice little program called Odin I read a lot about Odin and how to properly use it. After trying at least 5 different methods to get the phone into download mode with no success, I purchased a jig. The jig did the trick and instantly put me into download mode, I was ecstatic and hopeful that I could now fix the phone with Odin. I connected the phone to my PC in download mode, but Odin still didn't recognize the phone (I tried many versions of Odin, 1.85, 1.87, and the most recent 3.07). I do have the latest drivers for this phone, which I downloaded from Samsung's website. The phone will charge through the computer but the computer does not recognize it otherwise and will not allow me access its mass storage (I am running Windows 7 64 bit). I have tried using a different USB cable, and I have tried to use a different PC, the other PC I used popped up with a message saying that Windows could not successfully download the drivers (that was after I downloaded the drivers from Samsung's webpage and plugged the phone into the computer). I've even tried transferring stock firmware onto an external SD card and loading it onto the phone from restore mode (is that even possible to do?). I have also tried running Odin in compatibility mode, still didn't detect the phone. I should probably also mention that Kies Mini also does not recognize the phone. I asked my friend if he ever tried rooting this phone and he said no, so I'm assuming this issue has nothing to do with a failed attempt to root.
I really want to get this phone working, but I have run out of options to try. I am hoping that someone on here has a solution for me from a similar experience. After reading through the forum, I have noticed that people on here are very helpful and also very friendly; something that I can say is very different from some of iPhone forums I've used. I apologize if there is already a similar thread to mine, I've read through many threads and none of the solutions have worked for me. I also apologize for my first post being so lengthy, I just wanted to state all of the methods that I've tried to fix this phone. Thanks for your replies.

Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?

itzik2sh said:
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
Click to expand...
Click to collapse
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are

It sounds like you can't use Odin because of a windows issue. Try installing linux. I use ubuntu
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
You can also run as live CD or in a virtual machine
Sent from my HTC One X+ using xda app-developers app

hubbs134 said:
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
Click to expand...
Click to collapse
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !

itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
I second this... This should fix your driver issues.

Thanks for both of your replies. Odin detected my friends GS3 so I know it's not a Windows issue.
itzik2sh I did what you suggested and now got the command to function properly. I am going to try and finish the tutorial, I will be back soon with results. Thanks.

The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks

Irish Enigma said:
I second this... This should fix your driver issues.
Click to expand...
Click to collapse
I forgot to mention that I can here the sound that a device was just connected to the computer via USB, and a message pops up saying USB device not recognized. When I click on the message it says "One of the USB devices connected to this computer has malfunctioned, and Windows does not recognize it."

Tried a different port? Tried second different port with a different USB cable?

itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
Theraze said:
Tried a different port? Tried second different port with a different USB cable?
Click to expand...
Click to collapse
Ok I got the device connected and I got Zadig running, however, there is no option for "Samsung USB Composite Driver" on the drop down list, on "gadget Serial", "Gadget Serial Control (interface 0), and "1.3 HD Webcam (Interface 0)'. What should I do?

On the one-clicks, you don't actually want to use zadig. Apparently it conflicts, which is awesome for something that gets released WITH the tool.
If you're doing manual Heimdall, make sure you've told zadig to list all devices in the menus. Your phone should show up after that.
If you're using a one-click, make sure you're using a USB port on your computer where you have NOT installed zadig, Kies, or Samsung official drivers. Follow the steps in the one-click religiously, and it should cooperate.

Follow the guide %100 then Odin should work
Sent from my HTC One X+ using xda app-developers app

Ok I ended up getting the phone to register in Odin. I flashed it with the stock rom in Odin and it said success. The phone booted and it seemed like it was going to work but then the recovery menu came up. I posted a screen shot of what it says, what action should I take from here? Thanks

I am also in a different boot loop now, before it would load to the first screen (black screen saying samsung galaxy 4g) then restart, now it boots to past the splash screen to where it says "Samsung" and then reboots back to the screen where the pink letters roll across the whole screen. I don't need to flash bootloaders do I?

Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
EDIT: Samsung's are easy to brick and hard to debrick it may take a couple of trys
Sent from my HTC One X+ using xda app-developers app

Irish Enigma said:
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
OK GREAT NEWS! After flashing with Odin and that screen popping up, I clicked update from SD card, which failed. I then click system reboot, which brought me into the new boot loop. I put back into download mode and re-flashed with One-Click. Same recovery menu came up as before but when I clicked reboot system it hung at the "Samsung" black screen (after the splash screen) for about 20-30 seconds and then booted up I'm afraid to turn the phone off and see if it reloads lol. Is it safe to say that it is fixed? Or should I still follow your advice and run the proper recovery in Odin and then sideload a new rom? Or take different action? Thanks for all your help guys! Everyone gets a thanks click for being so helpful and friendly on an unhappy/confused/pissed off/ now happy new Android user!

Ok I just put my Tmobile simcard in and the phone is not detecting the sim. Any suggestion?

The IMEI number and baseband both say "unknown", I'm assuming this has to do with the simcard not registering?

hubbs134 said:
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Click to expand...
Click to collapse
What Heimdall package are you applying ?
After JAR package runs you are ready to go.
As I wrote, according to guide you can reinstall "Gadget" driver.
EDIT :
Enigma, if you're not an owner of an SGS 4G please stop advising.
Odin is not the common way since we have MTD ROMs and it had its problems.
hubbs134,
blank IMEI is a serious problem. without a proper IMEI your device is everything but a phone.
Try this : take battery off, press the POWER button for 10 seconds, leave device untouched for 15 minutes and then put battery back and power up.
This could bring your IMEI back to life. If not... maybe another flash will help.
P.S
The 3e recovery image you put on post #14 is a snapshot of the the stock unrooted ROM recovery.

[Q] Lenovo a369i - Cannot connect to my computer

So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted

Flash stock firmware back on.
I'm not home or I would search for links sorry.
In Google type your phone name + return to stock.
Sent from my LG-VS980 using XDA Premium 4 mobile app

1165
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!

PauloAgojo277 said:
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
Click to expand...
Click to collapse
To put the stock rom back on lenovo device, it must be powered off. (if it has a removable battery it must be removed).
preinstal the drivers into pc/laptop.
open device manager
plug in lenovo.
if device manager says 'mediatek,,,,' you are a winner & can use the sp flash tool included in the zipped rom to instal the rom.
if device manager says 'unknown device' you have 2 seconds to click on it & select update driver and a point to the downloaded lenovo driver (then it will be as above).
When you get green circle you are complete and may disconnect and put battery back in.

PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50094020
Here's a step by step guide ..please be aware of the steps .. That help me from bricking my phone almost so many times
Sent from my Lenovo A369i using XDA Free mobile app

If you are using windows 8 then you can't install USB drives
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
So if you are using windows 8 or higher version of windows then simply you have to degrade it to windows 7 or lower to install USB driver's

Emergency Recovery - doesn't recognise device

Hey,
I just flashed the firmware from another region and I have no idea why but it has failed at the end of the transfert.
Now I've got the blue screen saying that I need to connect my device to my computer and use the Emergency recovery function in SmartSwatch but it doesnt recognise my device...
I tried to reinstall the driver, change the usb port but it keeps failing!
Any idea?
I still have access to the download mode but when I try with the same file it failed, I'll try to download another firmware to see if it works.
Thanks

Connect it to Kies on your computer and use Kies factory firmware recovery setting to get your phone back up and running.

Neither Kies, Kies3 or Smart Swatch was able to see my device???
However I was able to flash the firmware using Odin :good:
I may try to re-download and install again a firmware from another region but it's pretty scary now
Yeah I know it's pretty stupid but I really want this TWRP to be working^^

massacreur75010 said:
Neither Kies, Kies3 or Smart Swatch was able to see my device???
However I was able to flash the firmware using Odin :good:
I may try to re-download and install again a firmware from another region but it's pretty scary now
Yeah I know it's pretty stupid but I really want this TWRP to be working^^
Click to expand...
Click to collapse
I have this problem. Have the recovery screen, can't get in to download mode and kies, kies 3 and smart switch wont detect my phone
---------- Post added at 10:54 PM ---------- Previous post was at 10:49 PM ----------
neilrlsmith said:
I have this problem. Have the recovery screen, can't get in to download mode and kies, kies 3 and smart switch wont detect my phone
Click to expand...
Click to collapse
Ok now I have download but no software recognises my phone and Odin fails...

By forcing my mobile to go into download mod (push Home Button + Volume Down+Power) after a couple of attempts it finally goes into the download mod.
If you can go into the download mod but OdinPC still doesn't work you have to try with another computer but if you can't go into download mod....
Hope you can fix it

even i have the same issue with my phone, its not detected by smart switch or any kies at all and now my phone is just a brick, plz help.

did you try to downgrade your os?
if so you need a firmware equal or bigger than the one you installed.

once you enter your sn in smart switch it will start downloading fw for your phone, and store it temporary in a temp folder.
From there you can copy fw to some other location on your disk, and flash it via Odin.

Use odin to load the stock AP file. Solve my problem.

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%