Database Info

[Q]Galaxy Fit brick

Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.

you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked

n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.

Can you come in recovery?
Press Power On + Home Button at once

If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.

viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.

cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences

have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!

djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.

may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....

I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u

vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.

ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems

viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!

vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.

ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...

vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:

Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.

[Q] Help!!! SGH T679 Cant go into Recovery Mode

Hello, this is my first post in XDA and i would like to thank everyone for making all these resources and information available online.
Ok here is the story:
I was trying install SlimBean 4.2.2 from http://forum.xda-developers.com/showthread.php?t=2185107 on my SGH-T679. I had TWRP on the phone. The problem came with the gapps( well not sure the download link is not working) i could not find the gapps for the rom. Every time i flash, after rebooting some of the apps were not working correctly..eg it keep saying calender storage is not responding. So the phone was sluggish and kept freezing.
I tried re-flashing with the latest gapps 4.4.2 on the SlimBean official website but it was not working correctly either cause the rom was version 4.2.2 and UNOFFiCIAL.
So i decided i tried the previous gapps in this thread to http://forum.xda-developers.com/showthread.php?t=2029362 and reflash it. now After rebooting and the phone start up, it got stuck in " unfortunately the process com.google.prosess.gapps has stopped'..then i press ok...it gives unfortunately setup wizard has stopped and keeps saying that forever
i thought it was no big deal:silly: i just reflash it again but now i cannot go in recovery mode anymore. Everytime i reboot the phone and press V+ it does nothing... it just continue...show the SlimBean logo and get stuck in the setup wizard thing. I even connected the phone my computer , i cant access the exter sd card folder either..
The only thing that is still working is the download mode .. when i reboot the phone and press v- it does go to download mode.
So guys what course of actions should i take to resolve this issue? I cant fasboot to reinstall the recovery cause my computer (windows 8.1) cannot correctly detect my phone when it is not working. do i need to download odin?
I would appreciate any help

Marcatus said:
Hello, this is my first post in XDA and i would like to thank everyone for making all these resources and information available online.
Ok here is the story:
I was trying install SlimBean 4.2.2 from http://forum.xda-developers.com/showthread.php?t=2185107 on my SGH-T679. I had TWRP on the phone. The problem came with the gapps( well not sure the download link is not working) i could not find the gapps for the rom. Every time i flash, after rebooting some of the apps were not working correctly..eg it keep saying calender storage is not responding. So the phone was sluggish and kept freezing.
I tried re-flashing with the latest gapps 4.4.2 on the SlimBean official website but it was not working correctly either cause the rom was version 4.2.2 and UNOFFiCIAL.
So i decided i tried the previous gapps in this thread to http://forum.xda-developers.com/showthread.php?t=2029362 and reflash it. now After rebooting and the phone start up, it got stuck in " unfortunately the process com.google.prosess.gapps has stopped'..then i press ok...it gives unfortunately setup wizard has stopped and keeps saying that forever
i thought it was no big deal:silly: i just reflash it again but now i cannot go in recovery mode anymore. Everytime i reboot the phone and press V+ it does nothing... it just continue...show the SlimBean logo and get stuck in the setup wizard thing. I even connected the phone my computer , i cant access the exter sd card folder either..
The only thing that is still working is the download mode .. when i reboot the phone and press v- it does go to download mode.
So guys what course of actions should i take to resolve this issue? I cant fasboot to reinstall the recovery cause my computer (windows 8.1) cannot correctly detect my phone when it is not working. do i need to download odin?
I would appreciate any help
Click to expand...
Click to collapse
Odin is the way

LS.xD said:
Odin is the way
Click to expand...
Click to collapse
ok ...but how do i proceed with this?
last time i downloaded Odin it was not working ...it could not detect my phone so i could not do anything.
is there some drivers i need to download in addition,,,i did tried Kies but its useless for my phone
I gonna try to follow these directions again http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539

Marcatus said:
ok ...but how do i proceed with this?
last time i downloaded Odin it was not working ...it could not detect my phone so i could not do anything.
is there some drivers i need to download in addition,,,i did tried Kies but its useless for my phone
I gonna try to follow these directions again http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Click to expand...
Click to collapse
Uninstall KIES ! Keep the drivers

LS.xD said:
Uninstall KIES ! Keep the drivers
Click to expand...
Click to collapse
It still can't detect my phone in download mode despite i installed the drivers...i probably need to have windows 7
Aslo can i install TWRP latest version 2.7.0.0 on my phone sgh t679? I previously had 2.5.0.0
And how do i get the 'tar' file?

What's your windows versionnow?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
Get the firmware from Samsung-Updates.com
Sent from my beloved HTC One S using (most time buggy) Tapatalk

LS.xD said:
What's your windows versionnow?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
Get the firmware from Samsung-Updates.com
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
i have windows 8.1 now
Alright i'm download the drivers in Samsung-Updates and see it can work
What about the tar file: i need tar file for cwm or twrp

Marcatus said:
i have windows 8.1 now
Alright i'm download the drivers in Samsung-Updates and see it can work
What about the tar file: i need tar file for cwm or twrp
Click to expand...
Click to collapse
Samsung-Updates.com provides the full firmware as tar file flashable via odin.

Alright, i downloaded a 335mb zip file on samsung update for my phone
It has the MD5 file and a SS_DL.dll
is the dl the driver.. do i install it manually?

LS.xD said:
Samsung-Updates.com provides the full firmware as tar file flashable via odin.
Click to expand...
Click to collapse
So...i have the md5 file to flash but my laptop still cant recognize my phone
I tried to manually install the dll file by putting in it in the System32 folder and doing regsvr32.exe your_dll.dll in command promt but it only gives me an error.
I guess my only hope is to install windows 7 and it work...
anyone have have some suggestion
I would appreciate the help

Marcatus said:
So...i have the md5 file to flash but my laptop still cant recognize my phone
I tried to manually install the dll file by putting in it in the System32 folder and doing regsvr32.exe your_dll.dll in command promt but it only gives me an error.
I guess my only hope is to install windows 7 and it work...
anyone have have some suggestion
I would appreciate the help
Click to expand...
Click to collapse
Did you use THIS this drivers?

LS.xD said:
Did you use THIS this drivers?
Click to expand...
Click to collapse
Yeah I tried this driver before.. after reboot and I plug my phone
it says usb connected then a window pop up saying installing driver for this device,,,,and stay stuck there forever. No matter how much time I wait for it to install the goddam driver it never completes it.
So yeah...as for the abd interface driver , I downloaded it. do I need to do something specific with it? I already have the adt bundle on the laptop

Marcatus said:
Yeah I tried this driver before.. after reboot and I plug my phone
it says usb connected then a window pop up saying installing driver for this device,,,,and stay stuck there forever. No matter how much time I wait for it to install the goddam driver it never completes it.
So yeah...as for the abd interface driver , I downloaded it. do I need to do something specific with it? I already have the adt bundle on the laptop
Click to expand...
Click to collapse
Go to device manager and installing the driver manually instead of automatic should solve your issue

[Completed] HELP me unbrick my GT-I9300

Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?

Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.

styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?

Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.

Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device

styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .

TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also

Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.

[ROOT] Samsung Galaxy Tab E - T561

Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me

hey tried this but flash failed. now i am stuck at boot logo
imfaraz said:
Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me
Click to expand...
Click to collapse

Any update?
Sent from my SM-T560NU using XDA Free mobile app

sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3300291

Sorry for being so late!
lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
What Model do you have there buddy?

- Install Kies3 from samsung.
- It will not recognize the device .... no panic!!!
- Open in menu Tools->Update and initialize firmware
* put the model number and serial number you have in the back of the tablet...
- It will download the proper original firmware from the samsung site and once done push on restore

sm-t561
Not work. F A I L !

bejinaru said:
Not work. F A I L !
Click to expand...
Click to collapse
Do it the proper way!
http://forum.xda-developers.com/showthread.php?t=3302935

How do I do it with out PC

I have the T561M Tablet.
Is there a ROM for android 6 or 7 for the T561M ??? At where???
Because I have ROOT and RECOVERY, but ROM is missing.
sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse

lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?

no root t561m
My T561m is with the December 2016 security update and I was not able to do root. Has anything changed? Any suggestion?

ciqvillanueva said:
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?
Click to expand...
Click to collapse
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,
after that connect your device to the computer, on your computer you'll see this.
then click "AP" and select the unzipped firmware you downloaded and click enter.
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.
Don't mind my gramatical mistakes. I hope this helped you.

Lunaworks2007427 said:
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
View attachment 5244307
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,View attachment 5244319
after that connect your device to the computer, on your computer you'll see this.
View attachment 5244321
then click "AP" and select the unzipped firmware you downloaded and click enter.
View attachment 5244311
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.View attachment 5244329
Don't mind my gramatical mistakes. I hope this helped you.
Click to expand...
Click to collapse
Unfortunately it did not work with rooting, did it as described above.
After the reboot, the tablet hangs at the start screen and does not boot any further.
how can I undo this, because before the device ran without problems

Hello everyone. I need help here.
I have a Samsung SM-T561 & some months ago, I upgraded to version 7.1
Then a few days ago, I wanted to upgrade it to version 10.
That's where things got messed up!
1st. I didn't make a backup of what current ROM.
2nd. I completely forgot to enable USB debugging (again, despite It wasn't the first time I used custom ROM)
3rd. The problem must have been from the ROMS I installed. They didn't work. So I factory resetted EVERYTHING. EVERYTHING. INCLUDING THE SYSTEM.
So basically, I HAD TWRP. I HAD NO OS. I DIDNT TURN ON USB DEBUGGING MODE.
Then I understood that I didn't need ODIN anymore because I had TWRP.
So.
I downloaded the files to flash again. On SD card. And inputted it inside . So it still DIDNT WORK!!
Then I flashed in IMAGE form.
Then my TWRP DISAPPEARED.
IM ON CONSTANT BOOTLOOP.
THE ONLY THING I CAN ACCESS IS THE DOWNLOAD MODE.
AND I CAN NOT CONNECT WITH ODIN BECAUSE I HAVENT TURNED ON USB debugging...
Someone should kindly... please. Get back to me

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%