Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.
IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)
crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?
crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back
thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.
G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%
Related
I have a Galaxy Tab 2 (P5113) that won't boot at all. I can get it into Download mode, but not recovery. I have tried using ODIN to flash a new recovery and a complete ROM and it usually errors out with and error of NAND write error, (Successful 0, Failed 1). I have tried multiple ROMs and a couple of recoveries to no avail. I have installed KIES and made sure it wasn't running in the back ground. I even tried to flash a PIT and it gets to a point that says there is no PIT partition. Any thoughts? All help would be appreciated. Thanks.
flash with latest recovery use twrp
krishna fattepurkar said:
flash with latest recovery use twrp
Click to expand...
Click to collapse
I'll give twrp a try.
Tried twrp. Still getting the same error. Here is a screenshot of it.
natebarrett said:
I'll give twrp a try.
Click to expand...
Click to collapse
failed at nand write .
This can be for a number of reasons , the least serious being:
1. Are you sure your phone is not locked to a network ?
2. Did you use an original USB cable ?
3. Did you connect directly to USB port of computer and not a
usb hub ?
4. Try another USB port on your computer ?
1. This a wifi only version so no carrier.
2. It is the original cable
3. Connecting directly to the computer, but I am using the front ports on a tower. I will give the rear ports atry.
4. Used both front ports, but will give the rear ports a try.
Thanks for the thoughts.
krishna fattepurkar said:
failed at nand write .
This can be for a number of reasons , the least serious being:
1. Are you sure your phone is not locked to a network ?
2. Did you use an original USB cable ?
3. Did you connect directly to USB port of computer and not a
usb hub ?
4. Try another USB port on your computer ?
Click to expand...
Click to collapse
I have the same problem. I don't even get the samsung animation. if I have it conected to the wall I sometimes get battery image but it doesn't move . If I hold down only the power button when not connected to power, I get nothing. I also get the "Firmware update encountered an error" I can get to download mode and it says
ODIN MODE
PRODUCT NAME: GT-P5113
CUSTOM BINARY DOWNLOAD: YES (72 COUNTS)
CURRENT BINARY: CUSTOM
HHEEEEELLLLLLLLLLLLPPPPPPPPPPPPPP!!!!!!!!!!!!!!!
weedhed4life said:
I have the same problem. I don't even get the samsung animation. if I have it conected to the wall I sometimes get battery image but it doesn't move . If I hold down only the power button when not connected to power, I get nothing. I also get the "Firmware update encountered an error" I can get to download mode and it says
ODIN MODE
PRODUCT NAME: GT-P5113
CUSTOM BINARY DOWNLOAD: YES (72 COUNTS)
CURRENT BINARY: CUSTOM
HHEEEEELLLLLLLLLLLLPPPPPPPPPPPPPP!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Flash a stock firmware on your tab, your current binary says custom.. If it was a samsung rom it would have said samsung official..
Use ODIN to flash the firmware..
---------- Post added at 11:45 PM ---------- Previous post was at 10:47 PM ----------
And dont forget to charge it first.. even if you dont get the proper charging icon.. just leave it pluged in for an hr or so..
Sent from my GT-I9300 using xda app-developers app
weedhed4life said:
(...)
CUSTOM BINARY DOWNLOAD: YES (72 COUNTS)
(...)
Click to expand...
Click to collapse
Not bad 72 Odin flashes
Maybe you bricked something? EFS?
P5113 frustration
Android-Andi said:
Not bad 72 Odin flashes
Maybe you bricked something? EFS?
Click to expand...
Click to collapse
What do you mean? Bricked EFS? I have tried several times to do an Odin flash to stock. It says that it was successful and then turns off, only to come back on to the "firmware update encountered an error" I then have to flash a kernel to get it to even go into download mode. I am curious about something called omap flasher. I wonder if I can use that to get the thing working
Galaxy Tab 2 10.1
So what happened, my tablet started going very slow after the latest update so i decided to downgrade it. Because i was a bit stupid at that time i installed a software for a different device . After that, my tablet kept on restarting and after it finally went on the desktop, the desktop was re sized and the touchscreen wasn't working. I tried a lot of things to fix it. I went into download mode and i tried installing the correct software but somehow my tablet crashed completely. Now I'm stuck on the "Firmware upgrade encountered an issue. lease select recovery mode in Kies & try again." I have no access to recovery or download mode and Kies doesn't recognize my device. It says connecting for 5 minutes and then it says connection failed. If i try to switch off the tablet it keeps on switching back on until battery dies with the same message showing up. Can anyone help me fix the tablet and have a full software thats working properly?
It's Emmc bricked and it's very very difficult to fix and I don't know how to do it.
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
remus2244 said:
Galaxy Tab 2 10.1
So what happened, my tablet started going very slow after the latest update so i decided to downgrade it. Because i was a bit stupid at that time i installed a software for a different device . After that, my tablet kept on restarting and after it finally went on the desktop, the desktop was re sized and the touchscreen wasn't working. I tried a lot of things to fix it. I went into download mode and i tried installing the correct software but somehow my tablet crashed completely. Now I'm stuck on the "Firmware upgrade encountered an issue. lease select recovery mode in Kies & try again." I have no access to recovery or download mode and Kies doesn't recognize my device. It says connecting for 5 minutes and then it says connection failed. If i try to switch off the tablet it keeps on switching back on until battery dies with the same message showing up. Can anyone help me fix the tablet and have a full software thats working properly?
Click to expand...
Click to collapse
OMG.. u have same problem with me. i've been stuck like that in one week. i tried several ways to fix it but it same..back to "firmware upgrade........." in youtube so easy to fix it with odin or kies. but it so damn...i dont know why not work for me...
still waiting for someone help us
ibnufatkhu said:
OMG.. u have same problem with me. i've been stuck like that in one week. i tried several ways to fix it but it same..back to "firmware upgrade........." in youtube so easy to fix it with odin or kies. but it so damn...i dont know why not work for me...
still waiting for someone help us
Click to expand...
Click to collapse
That is scary, happened to me once, hold the power button for 10+ seconds. When the tab turns black, immediately hold the vol down button, hold it at the right time, if it fails try again, took me 5 or 6 times before I entered recovery. I just went to my guts, frankly I do not know what happened. Do you still have warrently? Can you send it to the JTAG service?
Somehow I could not enter download mode when I used any combination, so I relied only on the recovery to fix stuff. I would go to adb.
Perhaps this is a different condition, sorry. I am a flash junkie things work if you have cwm or twrp
Like @PanchoPlanet said already: it's the BSOD ("BlackScreen of Death") - DownloadMode is running in background automatically on that screen, you should be able to use odin to flash a rom.
Android-Andi said:
Like @PanchoPlanet said already: it's the BSOD ("BlackScreen of Death") - DownloadMode is running in background automatically on that screen, you should be able to use odin to flash a rom.
Click to expand...
Click to collapse
When this happened to me, I was having issues with Odin on Windows, but using Ubuntu and Heimdall, I was able to fix it.
PanchoPlanet said:
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
Click to expand...
Click to collapse
I cant seem to find this stock firmware for the tab 2 wifi/lte (verizon) anywhere
There's no file out for Verizon Tab 2 - it's a completely different device (different hardware)
Send from OnePlus One using Tapatalk
---------- Post added at 09:03 PM ---------- Previous post was at 08:18 PM ----------
ChrisJobe said:
I cant seem to find this stock firmware for the tab 2 wifi/lte (verizon) anywhere
Click to expand...
Click to collapse
What have you done? Please mention every step you did and filename of the used files!
What's the model number? sgh-i497 AT&T ?
Send from OnePlus One using Tapatalk
Verizon sch-i915
I loaded the wrong TWRP on it and it hard-bricked
The TWRP load was for the 5100. I clicked the wrong button
ChrisJobe said:
Verizon sch-i915
I loaded the wrong TWRP on it and it hard-bricked
The TWRP load was for the 5100. I clicked the wrong button
Click to expand...
Click to collapse
Flashed the TWRP.tar.md5 using odin?
Send from OnePlus One using Tapatalk
PanchoPlanet said:
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
Click to expand...
Click to collapse
Android-Andi said:
Flashed the TWRP.tar.md5 using odin?
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
No I used the TWRP application. Never had an issue with it on my nexus devices. My tab 2 is sitting at tomy1986.nt's house waiting to be jtag'd but he doesnt have the stock image. I bought another tab 2 just like it but when it got to my house the person sold me a tab instead of a tab 2 as the ad said it was. So thus I am stuck.
http://forum.xda-developers.com/galaxy-tab-2/help/stock-image-please-t3056704
My next option is having the device shipped back and send it to http://www.mobiletechvideos.com/samsung-galaxy-tab-2-10-1/ and pay $75 for them to fix it. I know the device isnt worth it but its the principal of the matter of me breaking something and not being able to fix it. Thus I am offering $20 to anyone that can get me the files I need.
@ChrisJobe idk the application... Any link?
Send from OnePlus One using Tapatalk
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en
Thats the application
http://jmzsoftware.com/2014/05/18/twrp-manager-4/
I have used this same application on all my devices and never had an issue until the tab2
If it's an app, i am sure uses real block name for flash.
On p51xx recovery sits on /dev/block/mmcblk0p6 - that's your broken block now.
You need to know, what's stored on /dev/block/mmcblk0p6 on your device...
After that you know what's needed (recovery too? Boot? Efs?)
I think you need to send it to a service center - i couldn't find anything for your tab: no recovery, no root... Simply nothing...
No root = no one can backup the block for you.
Send from OnePlus One using Tapatalk
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Use the latest version of Odin
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try diffrent USB ports on the computer and diffrent signal cords
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
Did you enable usb debugging? Oh my bad, scratch that, try connecting your phone to your pc b4 you open Odin (using the latest Odin and run as admin)
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
hi! i have the same problem , did you find a solution please? thanks
That secure download enable thing is normal mine has the same thing. Your phone is not connecting for whatever other reason
Try flashing exact stock firmware with odin.
SMG920I
POWERED BY INSUFFICIENT RAM
TUNED BY TEAM PINGPONG
DRIVEN BY KFORKAI
darksimo said:
hi! i have the same problem , did you find a solution please? thanks
Click to expand...
Click to collapse
Yeah i got it flashed. Turned out that i used an old odin also you have to get a firmware which has the same csc or one that it compatible with your device. Info on samsung csc can be found on the net, look for multi csc codes if you wanna change to software from another carrier.
Sent from my VS980 4G using XDA Free mobile app
Before you start flashing always disable reactivation lock. Othervise flashing may fail.
ODIN won't detect Galaxy S5 G906K [KT]
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Resolved.
nano-dev said:
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Click to expand...
Click to collapse
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
kingroot not working!
nano-dev said:
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
Click to expand...
Click to collapse
.................................................................................................................................................................................................
kingroot was working when they released V.4.5.0 but now not working anymore :crying:
sorry for my bad English
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try using box tools like z3x to see if problem would be solved
Update: i fix it by unmouting checking and mounting back the phone...weird a part or idk had to be not well attached.
Hello
I was trying to root Samsung galaxy grand prime G530H. But it has stucked in 'downloading...'
Secure Download : Enable in blue
Why can't I unlock the bootloader on FZ? There is just no such option in Dev Mode.
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Feyaad said:
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Click to expand...
Click to collapse
You could always try the S7 edge specific forums.
Not being sarcastic
root the chines root
i have sm-n9006 i cant root my phone
also have the secure download enadled in blue
any help ??
my phone is a chinses version ... which doesnt have the play store
Hello
Do you have your bootloader blocked, the new version of firmware enabled this option, you need to go to development options and enable the option of OEM, and that's it, you can flash whatever you want
Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?
Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.
styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?
Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device
styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .
TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.
"Custom Binary blocked by FRP lock" & Odin/PC won't recognize the device
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Try to use Smart Switch (from Samsung website), which also has the latest drivers, to recover your phone. (Google "how to recover with smart switch")
Alright,
Forgot to mention I tried Samsung Kies but cannot find the serial number on the device, I'll give Smart Switch a try this evening on my other PC and report back... hopefully that PC recognizes it, my tablet connects to this laptop but not the phone.. could USB debugging being disable cause this?
How close to bricked is this?
I'm such a fool!
Thanks for the feedback so far..
Hi boot tar flash odin frp lock of after stock rom flash
I went through this a few weeks back. I found my serial number (was a sticker originally on back of phone) and used smart switch to recover firmware. Then enabled developer options, oem unlock, flash TWRP thru ODIN etc etc.
So if I find the serial number, I save it .. good to know, thanks!
Hi boot tar flash odin frp lock of after stock rom flash
Click to expand...
Click to collapse
Can you elaborate just a bit?
zerotrick said:
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Click to expand...
Click to collapse
Hey man, im having the exact same issue with my S7 edge.
So I got my IMEI number, and with my number I went to imei. info / and I got my serial number through a warranty check through the site, you have to register to do it.
I used Smart Switch and I get an error when trying to use the emergency recovery "Model number cannot be initialized"
I'm also getting the error on my PC when trying to connect my device to odin saying that "USB device cannot recognize" and with that I cannot flash the stock firmware on the device.
So if you have gotten any solution to the FRP lock please let me know.
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Domino5 said:
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Click to expand...
Click to collapse
Thank you for the response. I will give this a go when I get home later today.
samuraichick0n said:
Thank you for the response. I will give this a go when I get home later today.
Click to expand...
Click to collapse
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
dusterphil said:
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
Click to expand...
Click to collapse
PC doesnt want to recognize my device, so Odin doesn't pick it up.
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
feri1969 said:
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
Click to expand...
Click to collapse
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
samuraichick0n said:
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
Click to expand...
Click to collapse
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hardware fault with the phone then
Need same kind of help
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
ladyhypa said:
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
Click to expand...
Click to collapse
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
I fixed this when I first rooted by flashing the stock bootloader, firmware etc everything through odin
Thanks
samuraichick0n said:
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
Click to expand...
Click to collapse
Ok seems like what most people are saying but unfortunately mine is not under warranty but thanks for your reply anyway.