Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
here we go...
[email protected] said:
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
Click to expand...
Click to collapse
Code:
USING KDZ IS SKILLFULL ART AND IMPROPER USE CAN LEAD TO PERMENENT HARD BRICKED PHONE
Someone sad that following worked, someone that not. You must try and you will see...
1) Get serial number of your phone
2) Enter it in URL csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=[COLOR=Red]LGP500[/COLOR]&esn=[COLOR=Red]000KPPB001234[/COLOR]
3) Show page that you get in source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='check_model' status='ok'>
<auth>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<esn>[COLOR=Red]123456789012345[/COLOR]</esn>
<msn>000KPPB001234</msn>
<esndate>20101201</esndate>
<buyer>SEA</buyer>
<esnoutgodate>20101203</esnoutgodate>
<ULocationcode>N</ULocationcode>
<buyername>HUB</buyername>
<csn>LG0000440022331</csn>
</auth> </response>
4) select & copy number between <esn> elements (123456789012345)
5) Enter this number to csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
If it won't work, you can try new link provided by kutysam (make thanks him on some of his post please)
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
6) Show page as source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>123456789012345</esn>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<msn>000KPPB001234</msn>
<esn_date>20101201</esn_date>
<sw_version>V10E_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz</sw_url>
<sw_locale_url>[B]http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz[/B]</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Here u will get url for firmware package (~117 mb)
download it on pc .
How To Flash With KDZ
1. Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/
KDZ_FW_UPD_EN.html
2. Install msxml.msi from the uncompressed
directory
3. Charge your battery to almost full state (I'm
not sure, but it can be reason if phone
doesn't start)
4. Turn phone off somehow (remove battery
etc.)
5. Install drivers properly
Get rid of all usb drivers like Nokia,
microsoft visual ++ run time environments
Install the LG drivers by selecting the update
manager from the lg site
Disable LGE Virtual Modem. In your Windows
operating system, go to Control Panel >
System > Hardware > Device Manager >
Modems > Right click on LGE Virtual Modem
and click Disable.
6. Enter emergency mode and connect ur device with USB cable to PC.
7. Yellow screen with text emergency mode
should appeared
8.Btw use good quality stock usb cable.
9.run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that
CDMA mod works too )
Select PhoneMode : DIAG (in case of fail try
EMERGENCY, and as last chance use
CS_EMERGENCY)
10. I Recommend do not switch phone off. There
was some people, which done it and after
they were not be able to turn it on again. If
flashing failed, just select some another
mode and try it again, again, try shake/
connect disconnect, again, again....
11. In KDZ file : Choose the ROM file you
downloaded in the first step
12. Press Launch software update
13. If it fails , try again and again and again till you get success !
14. Make sure that all update was done
successfully. Phone should restart itself
automatically
15. Disconnect the USB cable from the phone
16. Press the three button combo for HW reset
of device i.e volume up + home + power
button
U r done !!!
If you get success , add [SOLVED] as prefix to this thread name.
&
Hit Thanks for @The_ERROR (Original source for KDZ links) @GPadmanabh
Hello
I recently installed Cyanogenmod 12 on my D855 LG G3, and everytime I reboot, I get a Subsystem Crash message. Below the error message:
DemiGod Crash Handler: Subsystem Crash : Modem (Subsystem-restart: Resetting the SoC)
Press key to choose Dload mode or Reboot.
1)Volume Up : Dload Mode
2)Volume Down : Reboot
If you choose Dload Mode,
Please do the following action.
1) Dload Mode, Please connect USB
2)Get the ram dump image using QPST Configuration,
----------------------------------------------------------------------------------------------------------------
ERR crash log report, Version 3
Error in file rflte_msm.c, line 819
Error message: rflte_msm: Unable to get rx rsb data
Time of crash....
Uptime
Build ID
param
I have already tried to use QPST configuration, but as this is in download mode, I couldn't install the qcn file.
Could you please help me?
Best regards,
Pedro Beirao
Hi,
Thanks for using XDA Assist Please Standby when we move your post here LG G3 Help & Troubleshooting
Good Luck!
[GUIDE][Cube i6 Air (3G or Wifi)] How to install Android 4.4.4 (Stock & RemixOS) !
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Update your EFI BIOS
Install Windows 10
Disclamer: This process might contain ROM hacking, this is for advanced users.
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
THE FILES ARE NOT YET UPLOADED TO THE DRIVE SO DONT PANIC!
What you need:
Cube i6 Air (3G or Wifi)
A microUSB Cable
The Flashing Suite (Downloadable on my drive)
A compatible Android ROM (Downloadable on my drive)
THIS IS THE LINK I'M REFFERING TO WHEN SAYING "THE DRIVE"
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
What to do :
1.) Before starting, please make sure your device is not plugged in util i ask you to.
2.) Go to the drive, into your device folder, go to android folder, and download the "Intel_Flashing_Package.zip" archive you can find there.
It contains 3 Softwares mandatory for install. To gain some time, you can download the ROM you want to install now and save it for later.
3.) Extract the package anywhere on your disk, and Install each software without any specific settings on desired location.
You should install them following that order:
1- iSoCUSB-Driver
2- IntelAndroidDrv
3- Manufacturing flash tool
4.) Now you have all the software, you need the ROM ! You need to extract the ROM you downloaded (or download now if you did not) anywhere on your disk. it should look like a folder with these files:
The default Partition table is 4Gigs for Android, 1 of cache, and 25Gigs for Windows. You can replace it with any partition.tbl available on the drive, that suits your needs!
5.) You are now good to go! You can start "Manufacturing flash tool". Make sure your settings match these ones:
Then click on "File" then "Open", and choose the "flash.xml" you can find in your ROM folder, or if there are differents, choose the one that suits your need.
6.) Now the flash tool il waiting for your device to be connected. So make sure your tablet is in Android mode in BIOS, and then power it off.
To start the tablet in DnX mode (flashing mode), you just have to start it by pressing Volume+ and Power simultaneously. When its done, the tablet should display "Waiting for fastboot command..."
7.) Now your tablet is in DnX mode, you can plug it to your computer and it will flash automatically. the software will tell you when the flash finished by coloring the progressbar in green. The tablet should turn off when completed.
Congrats! You successfully Flashed your Android ROM !
Keep reporting cube for not doing tutorials so far !!!
Regards,
Max.
flash android rom
Hello,
i've followed your instructions but i'm unable to complete the flash.
I get an error:
01/27/16 12:55:01.827 INFO : Manufacturing Flash Tool V 6.0.43 (build on Sun May 18 12:29:29 PDT 2014)
01/27/16 12:55:01.831 INFO : Loading settings from C:/ProgramData/INTEL/Manufacturing Flash Tool.ini
01/27/16 12:55:01.847 INFO : Using Qt version: 4.8.1
01/27/16 12:55:01.847 INFO : Using XFSTK version: 1.5.5.
01/27/16 12:55:01.861 WARNING: Please select a flash file...
01/27/16 12:55:12.389 INFO : FlashStats saves the logs into C:/Users/ecardoso2/mfgft-stats.csv
01/27/16 12:55:43.277 INFO : FlashStats saves the logs into C:/Users/ecardoso2/mfgft-stats.csv
01/27/16 12:55:44.576 INFO : FlashStats saves the logs into C:/Users/ecardoso2/mfgft-stats.csv
01/27/16 12:56:03.194 INFO : Loading Flash file (I:/Media/Hardware/Cube i6 3g air/Android/cube_i6-Remix OS/images_cube_i6-B2015072804-signed/flash .xml)
01/27/16 12:56:03.195 INFO : GP_Flag is set to 0x80000045
01/27/16 12:56:03.196 INFO : Ready to flash!
01/27/16 12:56:17.406 INFO : do_new_medfield_device STARTING TO FLASH
01/27/16 12:56:17.407 INFO : Port 0/1/7 #0: IFW flash started - SN : Baytrail4EE86948
01/27/16 12:56:17.407 INFO : Disabling xFSTK wipe out ifwi option
01/27/16 12:56:17.407 INFO : Disabling xFSTK Misc DnX
01/27/16 12:56:25.624 INFO : Disabling xFSTK wipe out ifwi option
01/27/16 12:56:25.624 INFO : Disabling xFSTK Misc DnX
01/27/16 12:56:25.624 WARNING: Port 0/1/7 #0: Retry IFW Flashing - Serial: Baytrail4EE86948
01/27/16 12:56:34.824 INFO : Disabling xFSTK wipe out ifwi option
01/27/16 12:56:34.824 INFO : Disabling xFSTK Misc DnX
01/27/16 12:56:34.824 WARNING: Port 0/1/7 #0: Retry IFW Flashing - Serial: Baytrail4EE86948
01/27/16 12:56:44.025 ERROR : Port 0/1/7 #0: IFW flash failed - SN : Baytrail4EE86948
Click to expand...
Click to collapse
Can you help me complete the flash?
Thanks
Same message but error : Port 0/0/8 #0 : IFW flash failed
an idea ?
Hi, where can I get the right android stock rom for the cube i6 air ?
Rom
Can't seem to link the rom I found. A google search for "needrom cube i6 air" seems to get you there though.
Issue I'm having now is that the settings picture for the manufacting flash tool is no longer available so I can't change my settings for my tablet to show up. Anyone help please?
relnette said:
Hi, where can I get the right android stock rom for the cube i6 air ?
Click to expand...
Click to collapse
As a new member in XDA I'm now allowed to post links but if you do a search at blog.geekbuying.com for cube i6 air you'll find dual OS firmware separated in 4 parts that include official Windows and Android roms and instructions for how to flash them
Hello,
Sorry, its been a while. I had no time to check here, and i abandonned my tablet for a while to hackintosh some PCs.
Well, for the IFW Flash failed, I solved it by flashing through my laptop, as my main computer wouldnt succeed.
If the Flash bootloops to the BIOS menu, then you should double check you have a bootable "droidboot" image, and if not, replace the one you are using by the one on the official rom package.
I'm currently testing a RemixOS rom i found in china, which is of january 2016. Will keep you updated on this.
Also, i'm actually uploading roms to the drive, sorry for being so long, but i have the poorest upload rates (80ko/s)
Regards,
Max.
Can we use roms from teclast X98 for the I6?
Hello,
I'm a newbie but i have some experience flashing roms.
I have both the Cube I6 and Teclast X98. Both air 3G versions. I updated bios from both devices. Flashed the mirek190 rom to the teclast with succes. For the teclast i can find some roms but for the I6 its a lot more difficult. Are there clean android roms for the I6? Can i use the mirek190 rom for the I6?
Probably asking stupid questions, but thanks for the responses.
I have a Cube i6 Air Dual Boot (Android4.4/Win10)
Can I install the Remix OS from a Cube i6 Remix?
Have both the same hardware?
Thanks for your helpful information
I currently have windows 10 on my tablet without any version of android. I deleted all the android partitions and sent the space to my windows partition. Is there anyway to make it just an android tablet again??
Remove Win10 + Android 4.4 and install Remox OS
Hi, I've Dual OS Wi-Fi version of this tablet. I want to remove dual os (Win10 + Android KitKat) and install Remix OS, but I've problems to flash the ROM with fastboot.
I've tried to run flash.sh script present in the ROM folder. Commands of flash.sh script are these:
Code:
#fastboot flash fw_stage2 BYTC_IFWI_X64_R_MRDP1_7004_00_SecEnabled_EMMC.bin
#echo "waiting 10 sec ...."
#sleep 8
#sudo fastboot flash osloader efilinux-userdebug.efi
#sudo fastboot boot droidboot.img
#echo "enter droidboot waitting..."
#sleep 20
sudo fastboot oem wipe ESP
sudo fastboot oem start_partitioning
sudo fastboot flash /tmp/partition.tbl partition.tbl
sudo fastboot oem partition /tmp/partition.tbl
sudo fastboot erase system
sudo fastboot erase cache
sudo fastboot erase config
sudo fastboot erase data
sudo fastboot erase logs
sudo fastboot erase factory
sudo fastboot oem stop_partitioning
sudo fastboot flash ESP esp.img
sudo fastboot flash fastboot droidboot.img
sudo fastboot flash boot boot.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash system system.img
sudo fastboot continue
There is the problem when it executes "fastboot oem start_partitioning" command, it returns this error:
Code:
Failed (remote: unknown command)
finished. total time: 0.001 s
Can someone help me, please?
Thanks.
I've solved some problems installing with MFT.
1. failed at 5%- "Failed to make w:\recycler\scratch directory"
- I've manually copied and pasted a "CUSTOM_CONFIG.INI" to "C:\Program Files (x86)\Intel\Manufacturing Flash Tool".
2. failed at 11% - return to EFI shell in place of droidboot (Fastboot) shell
- I've reinstalled the firmware (2.4 and 2.6 as well)
- I've opened the MFT with administrator's authority.
- Then it worked! I'm not sure which one of these changes has affected it.
Flashing doesn't start
Hi, I made everything mentioned in the instruction but the flashing doesn't start. Flashing tool says "Ready to flash!", tablet "Waiting for flashboot command...", cable connected. What could be wrong?
stp max makes an effort to be more clear
:crying: . Your tutorials are really hard-working
hello
I tried to follow your tuto. But each time Manufacturing Flash Tool crashes... Can you tell me If I have to format the Android partition before and how ?
I think I delete android partition when deleting some files in windows. now trying to install android. I followed the instructions installed all software. when I open manufacturing flash tool, select file, the plug the tablet. the progress bar at 0% for 40 minutes nothing happening? what is wrong?
I suppose both partions are still installed, but not accessible. I logged out of windows trying to log into android. I cannot access bios and there is no start menu. how can I log into each petition?
Installed with the following changes to instructions:
2a) Install IntelAndroidDrv v1.10.0 (Included file in drive is 1.50.0 and causes program to fail at 5%) - Download here: https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
4a) Copy CUSTOM_CONFIG file from drive to C:\Program Files(x86)\Intel\Manufacturing Tool folder before starting
Also, I couldn't install the Intel driver package as Windows 10 blocked the install, to overcome this problem. I enabled the hidden Windows administrator mode and carried out all instructions from there:
Step 1: Launch Start Menu, search and select Command Prompt. Then right-click on it and choose Run as Administrator from the context menu.
Step 2: Type the following command without quotes at the Command Prompt and then hit Enter:
net user administrator /active:yes
You should see the message saying "command completed successfully".
Step 3: Launch Start Menu once again and right-click on user-account title at the top-left of the screen. Then click Sign-out.
Step 4: At the login screen, log into the Administrator account and you will return to the Desktop of that user profile.
Step 5:Locate and run the .exe file for the program which you want to install.
Step 6: As you have already logged into the Administrator account, the Smartscreen protection will be disabled and the installation should complete successfully.
Step 7:After you have completed the installation, just log back into your regular account after logging out of the Admin account.
Step 8: Finally, disable the Administrator account that was used earlier to prevent malicious access to your system files from external sources like hackers and cyber-criminals.
Just execute the following command (without quotes) to accomplish this feat from Command Prompt: "net user administrator /active:no".
i did everything just in totu and after finish i got the green bar but it didnt power off i noticed on my tablet i had many options one rebot so i click rebot but everything gone it take me to efi shell and nothing more when i try to open boot manager i didnt find anything no windows no android only the efi shell
whats wrong ?
Helpful if you make video tutorial
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/mont...046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mont...73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/mont...480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/mont...b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/mont...f936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications...t.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications...t.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link: https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=drivesdk
done
Missing links
Thanks for instructions, but your links are not correctly linked. If you could please fix it.
https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=drivesdk
Thank you. Could you also fix rest of the links?
lenovo-forums.ru/uploads/mont...046c561c4a.png
lenovo-forums.ru/uploads/mont...73461cc42e.png
lenovo-forums.ru/uploads/mont...480a6df072.png
lenovo-forums.ru/uploads/mont...b724004305.png
lenovo-forums.ru/uploads/mont...f936037988.png
lenovo-forums.ru/applications...t.php?id=56368
lenovo-forums.ru/applications...t.php?id=56391
http://lenovo-forums.ru/topic/18149-lenovo-vibe-shot-разблокировка-bootloader/
http://lenovo-forums.ru/topic/18150-lenovo-vibe-shot-расширенное-рекавери-twrp-by-sevenmaxs/
Those who are able to get into fastboot mode but are stuck at 11% or so, can try the following trick.
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
If the above trick worked then your device should boot and it failed then let me know the error.
Download -- https://drive.google.com/file/d/0Bwy...ew?usp=sharing
UPDATE: One of the user was successfully able to recover his device by following the above instructions. Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
help plz
link expired. please update
device starts to vibrates continously, fastboot mode is gone.
after following all the instructions the device starts to vibrates continously ,the fastboot option is lost, no led, only vibration and in device manager quolcomm 9008 is showing, . searched almost the internet, tried with Qfill tool and it fails. please help , a lot of users are suffering from this issue, thanks in advance.