Database Info

Did I brick it?

I just rooted my Koodo LG optimus one with the instructions provided in the following link,
http://forum.xda-developers.com/showthread.php?t=1001713
I then bought the premium version of ROM manager from the android market and hit backup ROM.
The s/w asked me for the backup name as in the photo,
http://www.appbrain.com/app/rom-manager-%28premium%29/com.koushikdutta.rommanager.license
Then, LG logo started flashing and for more than 30 mins. I pulled the battery out and restarted it again. LG logo shows up and the screen goes blank.
Could you help me how do I fix this?
Should I repeat this...
Download KDZ updater
Install msxml.msi from the uncompressed directory
Conect your device (do not turn on disk storage) and run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT
Select PhoneMode : DIAG
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update and wait (It will be 10 minutes or so). In your phone it will appear "Emergency mode". Wait until it reboots.
UPDATE: Did the above, it solved the problem...

[Q] Help! Getting this error while using SUT (Software update tool)

When i tried to update my phone using a nb0 file i got this error :
error code 0xf699
Error: Task 1 of 1, Download image fail,
Error= QPD_error_emmc_exceed_sd capacity
init mode=emergency download mode
I have no clue what could be the reason as google search returned nothing , Please suggest what can i do? Thanks

[HELP]

i installed cm 10.1 but gapps 10 and..
I have followed all the steps correctly. Now the reboot is complete and the screen is stuck at "unfortunately the process com.google.process.gapps has stopped" error. If I click okay I get another error "Unfortunately, setup wizard has stopped". Please help. this is urgent. i cant do anything on my phone now.
I tried with KDZ but usb debugging is not enabled and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me

Working download link for stock Firmware India LG P 500

Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500

here we go...
[email protected] said:
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
Click to expand...
Click to collapse
Code:
USING KDZ IS SKILLFULL ART AND IMPROPER USE CAN LEAD TO PERMENENT HARD BRICKED PHONE
Someone sad that following worked, someone that not. You must try and you will see...
1) Get serial number of your phone
2) Enter it in URL csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=[COLOR=Red]LGP500[/COLOR]&esn=[COLOR=Red]000KPPB001234[/COLOR]
3) Show page that you get in source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='check_model' status='ok'>
<auth>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<esn>[COLOR=Red]123456789012345[/COLOR]</esn>
<msn>000KPPB001234</msn>
<esndate>20101201</esndate>
<buyer>SEA</buyer>
<esnoutgodate>20101203</esnoutgodate>
<ULocationcode>N</ULocationcode>
<buyername>HUB</buyername>
<csn>LG0000440022331</csn>
</auth> </response>
4) select & copy number between <esn> elements (123456789012345)
5) Enter this number to csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
If it won't work, you can try new link provided by kutysam (make thanks him on some of his post please)
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
6) Show page as source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>123456789012345</esn>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<msn>000KPPB001234</msn>
<esn_date>20101201</esn_date>
<sw_version>V10E_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz</sw_url>
<sw_locale_url>[B]http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz[/B]</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Here u will get url for firmware package (~117 mb)
download it on pc .
How To Flash With KDZ
1. Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/
KDZ_FW_UPD_EN.html
2. Install msxml.msi from the uncompressed
directory
3. Charge your battery to almost full state (I'm
not sure, but it can be reason if phone
doesn't start)
4. Turn phone off somehow (remove battery
etc.)
5. Install drivers properly
Get rid of all usb drivers like Nokia,
microsoft visual ++ run time environments
Install the LG drivers by selecting the update
manager from the lg site
Disable LGE Virtual Modem. In your Windows
operating system, go to Control Panel >
System > Hardware > Device Manager >
Modems > Right click on LGE Virtual Modem
and click Disable.
6. Enter emergency mode and connect ur device with USB cable to PC.
7. Yellow screen with text emergency mode
should appeared
8.Btw use good quality stock usb cable.
9.run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that
CDMA mod works too )
Select PhoneMode : DIAG (in case of fail try
EMERGENCY, and as last chance use
CS_EMERGENCY)
10. I Recommend do not switch phone off. There
was some people, which done it and after
they were not be able to turn it on again. If
flashing failed, just select some another
mode and try it again, again, try shake/
connect disconnect, again, again....
11. In KDZ file : Choose the ROM file you
downloaded in the first step
12. Press Launch software update
13. If it fails , try again and again and again till you get success !
14. Make sure that all update was done
successfully. Phone should restart itself
automatically
15. Disconnect the USB cable from the phone
16. Press the three button combo for HW reset
of device i.e volume up + home + power
button
U r done !!!
If you get success , add [SOLVED] as prefix to this thread name.
&
Hit Thanks for @The_ERROR (Original source for KDZ links) @GPadmanabh

Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool

Those who are able to get into fastboot mode but are stuck at 11% or so, can try the following trick.
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
If the above trick worked then your device should boot and it failed then let me know the error.
Download -- https://drive.google.com/file/d/0Bwy...ew?usp=sharing
UPDATE: One of the user was successfully able to recover his device by following the above instructions. Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.

help plz
link expired. please update

device starts to vibrates continously, fastboot mode is gone.
after following all the instructions the device starts to vibrates continously ,the fastboot option is lost, no led, only vibration and in device manager quolcomm 9008 is showing, . searched almost the internet, tried with Qfill tool and it fails. please help , a lot of users are suffering from this issue, thanks in advance.