I was trying to make a NANDROID backup with clockwork mod...but on doing reboot to recovery, I entered fastboot mode..
I found two methods to get it back
a) http://forum.xda-developers.com/showthread.php?t=1088046
but after the "fastboot erase recovery" command...it fails to detect my phone...stays on "waiting for phone" for very long
b)http://forum.xda-developers.com/showthread.php?t=1015332
i got the ROM from here
http://hotfile.com/dl/102451200/37ea...00-DZ.zip.html
its a .dz file but renaming it to .kdz works fine for the friend who gave me this link
however when i tried renaming it and then opening with KDZ, I got this log:
15:02:14 Launching SW update
15:02:14 Unpacking KDZ
15:02:15 KDZ file extraced (I am using exact syntax)
15:02:15 Extract file error
===FINISHED===
I've also tried other files from the official links.. the .kdz files for 10d and 10e, but i got the same error for both of these.... however, a .cab file of same name is formed before it fails....
also, when i open the read phone info window, clicking on read info crashes the program...while clicking on launch upgrade gives a message to "install CSMG B2C client tool
select tool-> B2C client setup menu" (but where is this tool -> b2c.... thing?)
what is wrong and how to fix it??
This is my first android (only a week old) so not much experience ...please help
PS- please reply ASAP!!
Solution!
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Edit: As an alternative, a virtual environment running XP will do the job. Those steps are up to you.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
Edit: It's been reported that some users have been able to boot in to their old rom after this point. If you can, you're done. Go
back and put CWR on and flash whatever you want. If you are still stuck, continue this guide.
5) Put the battery back into the phone and turn it on. You will be back at the S/W Upgrade screen. This is where you want to be! Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Edit: Added some missing info.
Mod Please please sticky!!!
All credit goes to jriv
1. use windows xp
1. I SAID USE WINDOWS XP - will not work under any other windows OS
2. download lg drivers for g2x (not 100% sure if needed but I did to be safe
3. download http://csmg.lgmobile.com:9002/swdata...00/V21E_00.kdz
4. download the program in this thread http://forum.xda-developers.com/showthread.php?t=810271
5. unzip kdz
6. run msxml.msi
7. run kdz
8. leave as CDMA & DIAG
9. select the V21E_00.kdz file you downloaded in step 3
10. click launch software update
11. enjoy GB
a few users had to try a few times, it worked on try #1 for me in XP... vista/7 all failed when I tried
http://forum.xda-developers.com/showthread.php?t=1179750
+1........
Sent from a guy living in a van down by the river
Spunix said:
Mod Please please sticky!!!
All credit goes to jriv
1. use windows xp
1. I SAID USE WINDOWS XP - will not work under any other windows OS
2. download lg drivers for g2x (not 100% sure if needed but I did to be safe
3. download http://csmg.lgmobile.com:9002/swdata...00/V21E_00.kdz
4. download the program in this thread http://forum.xda-developers.com/showthread.php?t=810271
5. unzip kdz
6. run msxml.msi
7. run kdz
8. leave as CDMA & DIAG
9. select the V21E_00.kdz file you downloaded in step 3
10. click launch software update
11. enjoy GB
a few users had to try a few times, it worked on try #1 for me in XP... vista/7 all failed when I tried
http://forum.xda-developers.com/showthread.php?t=1179750
Click to expand...
Click to collapse
Will either 32bit or 64bit XP work?
U can use win 7 just get a program called XP mode its a virtual win XP
Sent from a guy living in a van down by the river
XP mode didnt work for me...device disconnects during upgrade and xo mode maes you reattach usb devices...which hangs the upgrade softwa
Ahh the links for V21E_00.kdz are all dead..on ALL of the forums
Step 3 not wprking for me. Wont even turn on while holding volume butons then install usb. Where do we get the drivers and what ones do we need? Do we install them on the phone or cumputer? How do we do this? When on click on the link for step 3 to dpwnload it brings up page saying not found. When I go to the xda page for step for to download it brings up a bar code type deal. This makes no sence. Step 5 through 10 I have pretty much done but everytime I press update software it either freezes the window or blanks the window. Or says it cant read my phone. Nor does my computer read my phone anymore. And when it does it mentions something about how the device in the usb port has manfunctioned.
Sorry for all the weird and noob questions. But the truth is the only reason I even attempted this update was b/c it was 4 easy steps which I followed to a T according to LG's website. I even read through then twice just to make sure. I am not a cumputer guy so if someone can help me out with this in simple terms that would be great. I am highly irrated at this situation that the manufacture would release a update and it fail for so many people. Now I have a awesome phone stuck on S/W screen
jmh625 said:
Step 3 not wprking for me. Wont even turn on while holding volume butons then install usb. Where do we get the drivers and what ones do we need? Do we install them on the phone or cumputer? How do we do this? When on click on the link for step 3 to dpwnload it brings up page saying not found. When I go to the xda page for step for to download it brings up a bar code type deal. This makes no sence. Step 5 through 10 I have pretty much done but everytime I press update software it either freezes the window or blanks the window. Or says it cant read my phone. Nor does my computer read my phone anymore. And when it does it mentions something about how the device in the usb port has manfunctioned.
Sorry for all the weird and noob questions. But the truth is the only reason I even attempted this update was b/c it was 4 easy steps which I followed to a T according to LG's website. I even read through then twice just to make sure. I am not a cumputer guy so if someone can help me out with this in simple terms that would be great. I am highly irrated at this situation that the manufacture would release a update and it fail for so many people. Now I have a awesome phone stuck on S/W screen
Click to expand...
Click to collapse
If your phone is stock and not rooted (or you haven't flashed an alternate recovery) step 3 can be skipped. Drivers are to be installed to the PC and make sure you scroll down to the T-mobile portion in the linked page. Just download this: http://s3.amazonaws.com/lgforum.com...nal/LG _USB _Drivers_All_4.9.7.zip?1298055768 and this: http://s3.amazonaws.com/lgforum.com...Mobile_Android_USB_Driver_v2.2.zip?1303408893
Unzip both and install to PC.
Just a note: It took me at least 3 attempts to get this going. Kept freezing at something (not exact) like: Model Dll Msg Not Found(3501, 1)
I'll try to get a mirror up for the .kdz file soon.
I know it says it won't work on Win7, but the upgrade doesn't fail... The program just stops responding and pretty much force closes. Is that what you meant by won't work on Win7?
I'm running XP and I still can't fix it. Doesn't launch the .kdz file unless the phone is disconnected (freezes when it's connected). When i try to plug it in after it says it has been launched, it does not recognize my phone.
SUCCESS!!!!
Although it's very frustrating when something goes wrong, I actually welcomed the new experience. After all, you do learn from your mistakes
Uploaded V21E_00.kdz and fixed the link in the OP.
This doesn't work. How many times do I have to post this in various forums before anyone hears me. I can't be the only person running XP and following the simple step by step instructions that can't get this to work.
I try a different way thinking that if I just run cwm recovery and install the old .rar file it will be fine. Didn't work, asked in the development section about this, and I get sent back to a post about this method that I have tried 100 times. I have uninstalled everything reinstalled everything. IT DOESN"T WORK!
josh1701 said:
XP mode didnt work for me...device disconnects during upgrade and xo mode maes you reattach usb devices...which hangs the upgrade softwa
Click to expand...
Click to collapse
You can use XP mode to do this, and yes the USB driver will detach. Just re-attach it and the flasher will kick right back in where it left off. I had to do this just twice during the procedure. As long as you stay on top of it you will have no problem.
http://forum.xda-developers.com/showthread.php?t=1180743
chrisdepew said:
This doesn't work. How many times do I have to post this in various forums before anyone hears me. I can't be the only person running XP and following the simple step by step instructions that can't get this to work.
I try a different way thinking that if I just run cwm recovery and install the old .rar file it will be fine. Didn't work, asked in the development section about this, and I get sent back to a post about this method that I have tried 100 times. I have uninstalled everything reinstalled everything. IT DOESN"T WORK!
Click to expand...
Click to collapse
IT DOES WORK! You should not be installing any .rar file via CWM. I think your problem is what you're doing with that .rar file. It needs to be extracted and run from your PC. CWM recovery has nothing to do with this...but you'll need to put it back when you're done. From the OP:
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
OneClickRecoveryFlasher.exe is in the NVflash folder.
is there a way to put the phone in s/w upgrade modE? im not bricked just want to be able to upgrade this for the baseband
Can I get step by step instructions for someone stuck with sw screen that has a completely stock phone. I have tried the above steps about 50 Times with same results. I don't know what I am doing wrong.
Phone Not Found
I have tried these steps a number of times so far and everytime I run KDZ it goes through the motions and says that the Phone is Not Found.
Anyone else get this?
overground said:
IT DOES WORK! You should not be installing any .rar file via CWM. I think your problem is what you're doing with that .rar file. It needs to be extracted and run from your PC. CWM recovery has nothing to do with this...but you'll need to put it back when you're done. From the OP:
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
OneClickRecoveryFlasher.exe is in the NVflash folder.
Click to expand...
Click to collapse
I only tried the .rar file after trying the steps in this message 50 times. I figured I needed try something new. I am on a third machine.
I have already flashed back to stock recovery. So, I guess I just need to install all those files to this machine and try everything again.
Hi i'm new to the forum but i have a question. First I have searched the net for hours looking for an answer before posting so if there is already a thread on this somewhere i have no clue how i missed it.
Ok here is the question. I used the LG support tool to try to update my phone to gingerbread but 5% in it stopped responding. After it closed my phone was stuck on the "S/W Upgrade" screen. I tried every method i saw on the net to recover it but none worked. I'm sending it back in to tmobile but since the phone is rooted i'm worried they will just void the warranty and make me pay for it. I have no idea how they know a phone is rooted so i'm not sure how to undo it. I cant use super one click since the phone wont load. I can still access clockwork mod recovery and even flash images but it still loads up to the S/W screen and stays there.I can also mount the usb,data,system and cache on my pc to access files. Anyone have any idea how I can unroot the phone or delete what i need to to avoid detection? Any help would be GREATLY appreciated. Thank you in advance.
Have you NV-Flashed it to stock? If not, that explains how you bricked it.
To answer your question go to this thread
http://forum.xda-developers.com/showthread.php?t=1191824
kwright1266 said:
Hi i'm new to the forum but i have a question. First I have searched the net for hours looking for an answer before posting so if there is already a thread on this somewhere i have no clue how i missed it.
Ok here is the question. I used the LG support tool to try to update my phone to gingerbread but 5% in it stopped responding. After it closed my phone was stuck on the "S/W Upgrade" screen. I tried every method i saw on the net to recover it but none worked. I'm sending it back in to tmobile but since the phone is rooted i'm worried they will just void the warranty and make me pay for it. I have no idea how they know a phone is rooted so i'm not sure how to undo it. I cant use super one click since the phone wont load. I can still access clockwork mod recovery and even flash images but it still loads up to the S/W screen and stays there.I can also mount the usb,data,system and cache on my pc to access files. Anyone have any idea how I can unroot the phone or delete what i need to to avoid detection? Any help would be GREATLY appreciated. Thank you in advance.
Click to expand...
Click to collapse
This is how guy zgjbeta unbricked his phone. You could try it.
How to unbrick your G2x from GB update through LG
******UPDATE FIXED THE PHONE THIS IS WHAT I DID************
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
5) Put the battery back into the phone and turn it on. Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Yes i did Nvflash it and i tried the steps in your second post first. I cant get the kdz to find my phone for some reason. It serches port -1 and then says it isnt found. if i choose the last option and input 5 for the port number it sees the phone but the program crashes. I tried port 5 because in the text of what kdz should say it finds the phone on port 5.
"After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1"
When I go to load the phone up it goes right back to the S/W update screen. No matter what i do i cant get that to stop coming up. Is there some way i can ,ake it see the right port from cdma mode?
Thank you for the answer anyway. I have seen for other phone models that there is just a file you can flash from the sd card that unroots phone but seen nothing like that for the g2x... is that possible or am i mistaken?
I dont know cause I still did not update, so I am not familiar with all things that might come up. Here is the entire thread http://forum.xda-developers.com/showthread.php?t=1180331 perhaps sone of these folks have similar problem.
I suppose they will come up with some way to make it flashable but the update is only out so it takes time for developers to make something.
Any idea what tmobile looks for when they check for root? maybe i can just eliminate all trace of it and send it in for service.
kwright1266 said:
Any idea what tmobile looks for when they check for root? maybe i can just eliminate all trace of it and send it in for service.
Click to expand...
Click to collapse
While maybe it would be different with a newer phone, I've sent in an old phone that was rooted for a replacement and it was fine. This was back with a MT3G, but they sent me a new one, and I just sent back mine which was stuck in a boot loop with no way of bringing up recovery.
They never contacted me or anything so i think it was fine.
Edit: Realized I forgot to actually say, I don't think they check.
thanks for the reply danish. Im just hoping im not one of the unlucky ones. Lg updater broke my phone it had nothing to do with me rooting so i could use titanium backup to protect my unstable piece of trash g2x. i definitely dont want to have to pay for it.
kwright1266 said:
thanks for the reply danish. Im just hoping im not one of the unlucky ones. Lg updater broke my phone it had nothing to do with me rooting so i could use titanium backup to protect my unstable piece of trash g2x. i definitely dont want to have to pay for it.
Click to expand...
Click to collapse
LOL u saying that u expect them to replace your phone when u messed it up...this is sad people dont know what there doing and they mess there phone up and expect a new one...lmmfao
adidas1224 said:
LOL u saying that u expect them to replace your phone when u messed it up...this is sad people dont know what there doing and they mess there phone up and expect a new one...lmmfao
Click to expand...
Click to collapse
You may want to go back and read that again buddy. It was bricked by the official LG updater tool. Nothing much to do wrong. You download the client, connect the phone, then run. Go forth and necro troll someone else's thread.
When i tried to update my phone using a nb0 file i got this error :
error code 0xf699
Error: Task 1 of 1, Download image fail,
Error= QPD_error_emmc_exceed_sd capacity
init mode=emergency download mode
I have no clue what could be the reason as google search returned nothing , Please suggest what can i do? Thanks
Hello
I recently installed Cyanogenmod 12 on my D855 LG G3, and everytime I reboot, I get a Subsystem Crash message. Below the error message:
DemiGod Crash Handler: Subsystem Crash : Modem (Subsystem-restart: Resetting the SoC)
Press key to choose Dload mode or Reboot.
1)Volume Up : Dload Mode
2)Volume Down : Reboot
If you choose Dload Mode,
Please do the following action.
1) Dload Mode, Please connect USB
2)Get the ram dump image using QPST Configuration,
----------------------------------------------------------------------------------------------------------------
ERR crash log report, Version 3
Error in file rflte_msm.c, line 819
Error message: rflte_msm: Unable to get rx rsb data
Time of crash....
Uptime
Build ID
param
I have already tried to use QPST configuration, but as this is in download mode, I couldn't install the qcn file.
Could you please help me?
Best regards,
Pedro Beirao
Hi,
Thanks for using XDA Assist Please Standby when we move your post here LG G3 Help & Troubleshooting
Good Luck!