Related
I keep getting this kind of error when I'm about to finish flashing my device lenovo s920
Code:
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with
the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t (Tool Title Hint: Runtime Trace Mode);
3.[Menu]Help-[SubMenu]Open logs folder.
BROM ERROR: S_CHKSUM_ERROR (1041)
[HINT]:
What is the cause of this?
if I dont checking "DA DL All With Check Sum" flashing done with green circle, but still nothing happened to device, nothing change.
I'm using
- SP Flash tools v3.1304
- ROM S920_ROW_S117
my built-in storage gone missing after I failed doing system update, that's why I want to flash my device
did you resolve this issue? kinda have the same issue
did you resolve this issue? kinda have the same issue
Code:
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with
the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t (Tool Title Hint: Runtime Trace Mode);
3.[Menu]Help-[SubMenu]Open logs folder.
BROM ERROR: S_CHKSUM_ERROR (1041)
[HINT]:
What is the cause of this?
if I dont checking "DA DL All With Check Sum" flashing done with green circle, but still nothing happened to device, nothing change.
I'm using
- SP Flash tools v3.1304
- ROM S920_ROW_S117
my built-in storage gone missing after I failed doing system update, that's why I want to flash my device[/QUOTE]
I have the same issue
I have the same issue
Help me!
i have the same issue please help mee
anyone solved this problem already??really stucked up on this one
any solution for this?
Any solution for this???
jonasatayan said:
Any solution for this???
Click to expand...
Click to collapse
Get copy of the rom that is not corrupted.
One cause of corruption is a bad download of the rom.
As it's a checksum error, see if there's an MD5 hash for the ROM file on the download site, if so run an MD5 on what you've downloaded and check if the hash you get matches the one on the download site.
Also deleting the checksum.ini file from the firmware folder removes these errors.
I get the same problem even after deleting that file. In other posts/sites, one mentions that in the ".ini " file change the switch from "1" to "0". For me that too didn't work.
but please try these.
I tried 3 ROM files, and all can't be corrupt.
nothing can do..this means ur emmc is corrupted/fried..
need send to center or just rip off ur phone and get new one..
checksum error 1401 is a fatal error for ur devices..RIP it
mr.rendezvous said:
I keep getting this kind of error when I'm about to finish flashing my device lenovo s920
Code:
Common Hint: For SP Flash Tool issues:
Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with
the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t (Tool Title Hint: Runtime Trace Mode);
3.[Menu]Help-[SubMenu]Open logs folder.
BROM ERROR: S_CHKSUM_ERROR (1041)
[HINT]:
What is the cause of this?
if I dont checking "DA DL All With Check Sum" flashing done with green circle, but still nothing happened to device, nothing change.
I'm using
- SP Flash tools v3.1304
- ROM S920_ROW_S117
my built-in storage gone missing after I failed doing system update, that's why I want to flash my device
Click to expand...
Click to collapse
As I knew, the error code 1041 is caused of unsupported ROM that you used, In case, there would be a message told you PMT Changed, Try to format first before flash your device with that ROM. then do flash again, try download only or format + download all, If you done and succeed, but nothing happened on your device. Maybe the EMMC has no partition.
Check the EMMC partition by going to Memory Test Tab on that Flashtool, if there showing an error with red message like Nand Flash Error or else, yes, the fact: your EMMC is truly broken and has no partition, should be changed by going to Service Center.
Hope this help you!
Adi Rivanto said:
As I knew, the error code 1041 is caused of unsupported ROM that you used, In case, there would be a message told you PMT Changed, Try to format first before flash your device with that ROM. then do flash again, try download only or format + download all, If you done and succeed, but nothing happened on your device. Maybe the EMMC has no partition.
Check the EMMC partition by going to Memory Test Tab on that Flashtool, if there showing an error with red message like Nand Flash Error or else, yes, the fact: your EMMC is truly broken and has no partition, should be changed by going to Service Center.
Hope this help you!
Click to expand...
Click to collapse
if this is the case i think my phone is dead. i tried the memory test and it shows Nand Flash Error. Sad. this helps a lot.Thanks
I had the same problem with lenovo k3 note. It shows NAND not detected in memory test. But in factory mode it shows up eMMC has 14 GB. Sorry if this is a noob question but is there a way to repartiton this? Or it is dead?
I had this issue. I solved it by clearing up some storage on my system. I've noticed some bizarre problems show up when downloading/extracting archive or ROM files and also when using the SP Flash tool itself. With about 6.5 GB free I was able to successfully re-download, re-install the SP Flash tool and get my device flashed.
In my case it says
NAND flash was not defected!
Lenovo P780 errors- "Kernel Block Map to PMT mismatch" "No find KernelGZ" "No Split"
DISCLAIMER
---------------
I ASSUME THAT THE PERSON READING THIS THREAD/ARTICLE IS FAMILIAR WITH WHAT IS ROOTING AND ITS RISKS. ITS YOUR OWN RISK TO ROOT YOUR PHONE AND INSTALL
CUSTOM RECOVERY OR CUSTOM ROM. ITS YOUR CHOICE. I AM NOT RESPONSIBLE FOR ANY BRICKED PHONE ARISING OUT OF THE PROCESS/OBSERVATION FOLLOWED IN THIS THREAD
THIS THREAD IS ONLY FOR THOSE:
=> KNOW HOW TO USE TOOLS LIKE MTK DROID TOOLS AND SP FLASH TOOLS
=> HAVE ISSUES OR DIFFICULTIES OR ERRORS WHILE ROOTING OR INSTALLING CUSTOM RECOVERY
BASED ON THE ABOVE POINTS, PLEASE PROCEED FURTHER
FOR PEOPLE WHO ARE FACING LOT OF DIFFICULTIES ROOTING AND UPDATING CUSTOM RECOVORY ON LENOVO P780 PHONE
THESE ARE JUST MY OBSERVATION, THE DIFFICULTIES AND ERRORS I FACED AND HOW I FOUND WAYS AROUND THEM IN DUE COURSE.
I WONT GUARANTEE IT WILL WORK FOR YOU, BUT IT MAY, MOST PROBABLY OR GIVE YOU MORE HELP IN SOME PARTICULAR SITUATIONS.
FIRST THINGS FIRST. DO IT WITHOUT FAIL
PLEASE KEEP A FACTORY IMAGE BACKUP OF YOUR WORKING PHONE BY USING SP FLASH TOOL. STORE IT ON A SEPARATE DRIVE OTHER
THAN PHONE MEMORY/PHONE SD CARD. PROCESS THIS ROM IMAGE WITH MTKDroid TOOL BEFORE DOING ANY KIND OF WRITE OPERATION ON YOUR PHONE
TAKE A BACKUP OF YOUR CONTACTS, MESSAGES, IMEI, PHOTOS/VIDEOS, PERSONAL STUFF, SETTINGS ETC AND STORE THEM ON YOUR DESKTOP/LAPTOP/EXTERNAL DRIVE
GENERALLY GOOD PRACTICE IS TO TAKE ALL SORT OF BACKUP FROM THE ACTUAL PHONE ITSELF BEFORE DOING ANY WRITE OPERATIONS.
THERE ARE PLENTY OF CHINESE MEDIATEK PHONES FOR WHICH FINDING PROPER IMAGE IS NEXT TO IMPOSSIBLE
THERE IS NO BETTER FRIEND THAN A FACTORY IMAGE TAKEN OUT OF YOUR OWN WORKING PHONE. YOU WONT REGRET
PHONE MENTIONED THROUGHOUT THE THREAD:
LENOVO P780 8 GB MODEL. Bought in INDIA 2013
Android version : 4.4.2
Baseband version : P780.V24, 2015/01/06 09:40
Build number : P780_ROW_8G_S228_150112
IMPORTANT PREPARATION AND GROUND WORK
FIRST OF ALL HAVE LOADS OF PATIENCE. DO NOT HURRY IN TO DOING THINGS FAST AND REPENT LATER. DEVOTE LOTS OF TIME TO UNDERSTAND THE PROCESS
READ EVERYTHING AND WATCH ALL RELEVANT INTERNET VIDEOS FULLY, CAREFULLY AND PROPERLY.
DO NOT FORGET TO TAKE A COMPLETE FACTORY IMAGE BACKUP OF YOUR PHONE USING SP FLASH TOOL. PROCESS THE IMAGE WITH MTKDroid TOOL. THIS IS VERY IMPORTANT
1. Have a reliable PC or Laptop. I have rooted and updated custom recovery on my phone using Win 8.1 laptop.
Hence I would prefer a PC/Notebook with windows OS(7/8.1) installed. It is easier to find software and drivers for windows.
2. Connect your switched ON phone to PC and verify if it is detected properly by your PC.
You should be able to access the phone storage and SD card if any
3. Ensure your phone is always USB debugging mode enabled.
4. Use a tool like "usbdview" to clean up errant drivers first. Have a clean device manager at beginning.
5. Ensure you have installed proper ADB drivers. Check in device manager you should have something like "ADB interface" with no yellow triangle.
That means your drivers are properly installed. If finding drivers are difficult use PDAnet or search for universal ADB drivers and install them correctly
6. Preloader or VCOM drivers should be installed correctly. The one which worked perfectly for me was the one which I saw in You Tube by ITXTutor.
Search for "How to Install MTK Preloader 65xx Driver Correctly - Windows 8.1 64bit approved ! [HD]-PAxTCvRmlio" in You Tube.
Go Through the tutorial and download files from there. Do it exactly as it says in the tutorial.
[NOTE : IF YOUR ANTI VIRUS BLOCKS MTKDroid TOOL CREATE AN EXCEPTION]
7. Download MtkDroidTools-v2.5.3 tools on your PC. Once downloaded run the application as administrator. Switch ON your phone
Connect phone to PC. Take screen shot of MtkDroid tool application with your phone details. Create a scatter file and save it.
During this process MTKDroid showed only one error
04/06/15 14:09:29 ATTENTION!
04/06/15 14:09:29 File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
[NOTE : I CAN SAY CONFIDENTLY YOU CAN IGNORE THIS ERROR. IT MIGHT BE SOMETHING THAT LENOVO USES TO ENFORCE ITS OWN RECOVERY IMAGE. THIS ERROR
FURTHER CREATES SOME PROBLEM DURING ROM IMAGE PROCESSING.]
8. Download SP Flash Tool v5.1352.01. Run the tool as administrator. Open the scatter file saved in previous step.
Go to Readback. Do a complete readback on phone. Start address always from 0x0000. Wait until READ back completes. It may take 15 to 30 minutes
and you end up with atleast 700MB size file.
My backup was 1 GB. Less than 700 MB means, there is some issue with read back. The factory image of kitkat which came as OTA was more than 700 MB.
Don't continue. Retry readback properly. You might have missed or incorrectly done some procedure(for e.g. wrong end address).
9. Once read back is complete, Run MtkDroidTools-v2.5.3 tools on your PC. Connect phone(switched on) to your PC.
Go to "root, backup, recovery" tab. Click on "To process ROM_ file from Flash Tool".
It will pop up asking to load the ROM image which you made in previous step.
Load that image. MTK should automatically start processing image.
At this point I got error as follows
05/06/15 19:16:27 --- Kernel Block Map to PMT mismatch!
05/06/15 19:16:27 -------------------------------------------
05/06/15 19:16:27 BlockName Offset
05/06/15 19:16:27 -------------------------------------------
05/06/15 19:16:27 Kernel: __NODL_PRELOAD 0x0000000003980000
05/06/15 19:16:27 PMT: PRELOAD
05/06/15 19:16:27 Kernel: __NODL_BMTPOOL 0x0000000118980000
05/06/15 19:16:27 PMT: FAT
05/06/15 19:16:27 -------------------------------------------
DON'T WORRY ABOUT THIS ERROR AS WELL. LET THE PROCESS CONTINUE
MTKDroid TOOL will ask if you need to make a CWM recovery automatically, click no and one more window will pop up, press cancel.
[NOTE : EVEN IF YOU SELECT YES TO MAKE CWM RECOVERY, MTKDroid TOOL WILL THROW MORE ERROR AS COPIED BELOW.
IT WONT CREATE CWM RECOVERY IMAGE. HOWEVER PROCESS WILL COMPLETE]
05/06/15 19:16:34 --- ERROR :No find KernelGZ
05/06/15 19:16:34 --- ERROR :No Split Boot Image
Because of PMT mismatch error Flash tool will create two scatter files.
MT6589_Android_scatter_emmc.txt and
MT6589_Android_scatter_emmc_PMT.txt.
MTK Log is as below.
05/06/15 19:16:27 --- scatter from PMTis write to the file:
C:\Users\..\Desktop\MtkDroidTools-v2.5.3\backups\Lenovo-P780_150112_ForFlashtoolFromReadBack_150605-191615\MT6589_Android_scatter_emmc_PMT.txt
05/06/15 19:16:27 - Use it if SP FlashTool errors of 8038 or 4050 occurs
The entire processed ROM file will be kept in backups directory of MtkDroidTools directory. Ensure you make a copy of this for safe keeping. This
is very important especially MT6589_Android_scatter_emmc_PMT.txt file will be very useful later.
[WHY YOU NEED TO DO ALL THESE FIRST IS BECAUSE IF YOU BRICK YOUR PHONE, EVEN A SOFT BRICK, MTKDroid TOOL IS VERY MUCH USELESS.
THIS TOOL WORKS ONLY IF YOUR PHONE IS SWITCHED ON AND BOOTED TO HOMESCREEN. MTKDroid USES ADB DRIVERS TO CONNECT WITH PHONE AND NOT VCOM DRIVERS.
IF PHONE IS NOT DETECTED BY MTKDroid THEN PROCESSING ROM IMAGE WILL NOT BE POSSIBLE. THAT OPTION WILL BE DISABLED ON THE MTKDroid TOOL.
SO NO SCATTER FILES, NO RECOVERY, BOOT, PRELOADER IMAGES, ETC, OF YOUR PHONE. SO BE VERY CAREFUL]
------------------- PROCEED FURTHER ONLY AFTER IF YOU HAVE COMPLETED ABOVE TASKS -------------------------
NOW ACTUAL PROCESS OF ROOTING AND CUSTOM RECOVERY STARTS
FIRST THING YOU WILL HAVE TO TRY IS ROOT THE PHONE USING FREELY AVAILABLE TOOLS
1. I tried various methods of rooting but, not one worked on Lenovo P780.
framaroot, towelroot, iroot, root genius, geno, mobogenie and many more didn't work.
Finally the latest version of Kingoroot did succeed to some extent.
2. Kingoroot version which worked partially was 1.3.8.2338
By partially, I mean kingo app did say Root was successful on both PC and phone. However Root checker application said "Root is not properly installed"
Application like SuperSU and busybox did not work after installation due to improper rooting.
[TRICK : DO A FACTORY REST]
3. I booted the phone in to FACTORY recovery. Did a "Factory Reset"
Now things started to brighten up!! The ever tough Lenovo P780 started to give in slowly and steadily.
After Factory reset done and phone booted up. The first thing I did was to take SP flash tool Readback once again, so that I have a clean factory image.
you may skip read back if you don't need a clean image.
4. Used another rooting application this time, i.e., iRoot older version 1.7.9.2
Viola!!! phone got rooted properly this time.
Root checker showed "Root Available", busybox and other applications started working.
NOW WE HAVE ROOT ACCESS TRY INSTALLING CUSTOM RECOVERY
[NOTE : EVEN IF YOUR PHONE DOES NOT GET ROOTED BY 3RD PARTY APPLICATION READ ON THERE IS STILL HOPE]
1. MOST HELPFUL LINK ESPECIALLY FOR ROOTING CUSTOM RECOVERY INSTALLATION IS GIVEN BELOW
http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
IF ROOT FAILED FOR YOU USE TUTORIAL IN LINK TO ROOT AND TRY. THAT IS A DIFFERENT PROCESS. BUT FIRST CUSTOM RECOVERY
2. Go through the link fully. Get a good understanding. No need to do it exactly as it says. A little bit of tweak worked for me,.
3. I first tried to overwrite the factory recovery with the same factory recovery image that I backed up earlier, to see how it goes.
It is always good to try this as a first step to write using flash tool. Use the scatter files and recovery image from back up.
Here's the sequence of steps I tried.
a) Using SP-Flash-Tool-v5.1352.01, Tried to overwrite only the recovery image again with same factory image(download only). Note I used
MT6589_Android_scatter_emmc.txt scatter file which was created from my phone from MTK droid tools.
I got error from flash tool
"PMT changed for the ROM; it must be downloaded"
Error number 8038. The image was not downloaded
b) Now I realized why MTKdroid tool created another scatter file MT6589_Android_scatter_emmc_PMT.txt. It was for this issue.
I retried the same steps again, but now with MT6589_Android_scatter_emmc_PMT.txt file. Flash tool downloaded the factory recovery image successfully.
I powered on the phone, but was shocked to see it was not booting up. It came to lenovo logo and displayed error something like "DL install failed"
It was never booting up. It was SOFT BRICKED!!!!
How come with just overwriting factory recovery image again with same image.... I don't know reason for that.
Even a simple, harmless operation of overwriting factory image caused a soft brick.
This is the main reason WHY do a complete read back and relevant back up before starting write operations!!!!
I tried several other scatter files along with TWRP and CWM recovery images downloaded from the internet. I tried with all scatter files from
http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605. It did not work.
c) Finally after several attempts, the working combination for me was a little surprise.
I tried MT6589_Android_scatter_emmc_PMT.txt file created from my phone, along with SP_Flash_Tool_v3.1304.0.119_lenovo and TWRP_v2.7.1.1_P780_ROW_KK_Corrected
both downloaded from http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
Select DA DL check box and do a download only.
This combination worked. Now I have a fully rooted and TWRP installed on my Lenovo P780.
Hope this helps!!!
Hi all i have new Lenovo PB1 770m I attempted to root it the TWRP was installed but it was not rooted
then I tried to update the firmware to the latest 151111 and no go, in the end i managed to delete the operating system so now I can boot to recovery mode only, When I try to restart it comes up with No OS Installed, I have tried to install xposed v79 sdk21 arm64zip no go, Ok now I know that I am an IDIOT for
not making a backup of original system and not cheking the firmware was the same as the root guide,
On the top of recovery screen is :- 2.8.7.7 SevenMaxs and TeamWin Recovery Project, I guess this could
be an expensive lesson, I have been looking for an original ROM with no luck so any help would be very
much appreciated, Thanks pluto1956, Mike
ps used info and files from here to try and root. http://forum.xda-developers.com/andr...oting-t3290347
UPDATE I managed to get a ROM from Russian site PB1-770M_S000156_150930_ROW_fastboot.7z 1.8gig
instructions say to be installed from computer via usb my problem is I can only access the internal storage or external SD card not the Usb-otg so it seems I can only update from the sd or internal memory
tried putting the rom on both but no go
Hi is there anybody that knows where and how to install the stock firmware for the phab PB1-770M
HELP
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
naeemdurrani said:
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Thanks brother, yesterday i downloaded one russian rom in zip format and there was a .bat file included in it. i only double clicked and it flashed through adb and fastboot and it was successfull. i got the operating system 5.0.2 but WLAN is not working, tried flashing several time but no luck. i learned that it is still under warranty ..so sent it to warranty. in a week it will be back with be for testing again hopefully.
well i will try your method as soon as i get my beast again. Thank you so much for helping out in timely manner, really appreciate it brother.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
---------- Post added at 08:10 AM ---------- Previous post was at 08:06 AM ----------
it is very easy my friend just look into the only topic/thread about Phab plus in xda. it will guide you well.
if you get any error in recovery like footer is wrong/signature verification failed. connect your phone and first check if your device in being tracked by adb. use adb devices.
if your device appear in the list of devices ..use fastboot oem unlock then flash sevenmax twrp again after entering into temporary twrp as per phab plus thread.
0verdaflow said:
How can you root this damn phones.... i was trying like for 2 days....
Click to expand...
Click to collapse
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
Could you please elucidate more? I downloaded the ROM and the flash program. However, I've no clue how to get going. I don't even see the xml files anywhere (as mentioned by you).
Just don't want to screw it up bad so being little more cautious.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Wakatsik said:
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
Click to expand...
Click to collapse
naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
i cant use the .bat cause my phone is already bricked...it wont be recognize by the app...the only way is thru QFIL but the problem is that i always get the error above
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
whiskey_1388 said:
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
Click to expand...
Click to collapse
My phone was wiped by me . I have TWRP and my phone is read as ADB interface (when in recovery mode). I tried adb devices and it returned 1f82f24b recovery. I also can access my phone memory from PC when in TWRP recovery which enables me to transfer files.
My problem is it is only read as ADB interface not as Qualcom COM port device. When I try Download_with_partition.cmd I get the error that it can not distinguish devices and to try. Any solution by those managed to install it successfully?
For everyone landing in this page due to wiping his OS of Lenovo Phab Plus by mistake (like I did), please refer to this thread:
Lenovo Phab Plus PB1-770M Stock ROM needed
Thanks!
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
I was not doing the 8936.mbn part!
By default it is 8916 so it doesnt work. but after changing that setting, it work!:highfive::good:
I can't unbrick
Hi!
I have a Lenovo Phab PB1-770M, this phone won't turn on, only Lenovo logo, or fastboot or flashmode.
With Flashtool i can't flash. In Fastboot i flash a recovery or operating system, i reboot the phone and again only the Lenovo screen, operating system not starting.
What can i do?
naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
this is what i get running the .bat command >
'adb' is not recognized as an internal or external command,
operable program or batch file.
╟δ╚╖▒ú╩╓╗·─▄╣╗╩╢▒≡adb╔Φ▒╕!╟δ╓╪╩╘úí
please ensure the phone can distinguish adb devices! Please retry!
Press any key to continue . . .
http://i.imgur.com/oAnHl76.jpg
http://i.imgur.com/sIZo0Hc.jpg
I downloaded the program SP_Flash_Tool_by_LG_v10c from 4PDA- , after flashing the phone fell into the boot lop.Keksik - member his program, sent me another scaterr file in which preloader, but after flashing him my phone is 100% dead Computer recognize the phone, but I can make a scatter file because MTK droid tools do not recognize the phone .To me need somebody make me a scatter file with files that must be because we splash tool ejects this in both cases when I pick scatter file,How I return phone did know somebody?
http://i.imgur.com/wRDeZZO.jpg with scatter in program
http://i.imgur.com/Vgkw0H2.jpg with cecond scatter
http://i.imgur.com/oxp4d5u.jpg without preloader
http://i.imgur.com/JiDhsxR.jpg with preloader
http://i.imgur.com/7x0g8XK.jpg from program and scatter in program
http://i.imgur.com/32DPkoR.jpg try format with second scatte
You should to flash with original d335_20c and lg flash tool.
I had the same problem and was trying to solve it within week
He is been original but for Kit Kat ,but phone be on Lollipop 5.0.2 .Keksik made program with splash toll ,then send me another scatter file and splash toll ejest error from then my phone is dead.Need scatter file for files which needs and I think phone return, because pc regognaize,splash tool same .
dejanxxxx said:
He is been original but for Kit Kat ,but phone be on Lollipop 5.0.2 .Keksik made program with splash toll ,then send me another scatter file and splash toll ejest error from then my phone is dead.Need scatter file for files which needs and I think phone return, because pc regognaize,splash tool same .
Click to expand...
Click to collapse
I sent you my scatter file in private messages
You should to flash all images without preloader and nvram
After that download v20c firmware and flash it via lg flash tool
Ok thanks you should know that only MTK drivers I see in device menager , else I dont. Ok without preloader i nvram.Did I must special splash toll I mean on version?
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool (5.x).
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly
JustAGuyWithAndroidPhone said:
Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly
Click to expand...
Click to collapse
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.
JustAGuyWithAndroidPhone said:
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.
Click to expand...
Click to collapse
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.
huupoke12 said:
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.
Click to expand...
Click to collapse
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.
JustAGuyWithAndroidPhone said:
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.
Click to expand...
Click to collapse
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".
Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)
huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\"
Click to expand...
Click to collapse
Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)
huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".
Click to expand...
Click to collapse
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!
Nokia3root said:
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!
Click to expand...
Click to collapse
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).
huupoke12 said:
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).
Click to expand...
Click to collapse
ok, i will try
huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
I am unable to extract the files! PLEASE HELP!!!
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install `python3` if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
THANK YOU VERY MUCH, BROTHER!!!!!!!!!!!!!
It worked!!
Now just have my story..... Actually, this was my friend's Nokia 3 which he gave me to root and I convinced him that I would root it and convinced him that there was no risk in it. Then I rooted the device for him very hardly but then I mistakenly deleted the os of the phone and then I searched the whole internet and found your post.... First of all, I got many errors while unpacking the nb0 file as I was using python 3.0, so I downloaded the python 3.8 installer but it wouldn't install because it was saying that that Service pack 1 was not installed in my Windows 7 but it was, hence I got very irritated and observed the log file and downloaded an update (KB3033929). Then I installed python 3.8 and thus I come to have a working mobile! I again rooted it and gave it to my friend and told him about these happenings.
Once again thank you very much!!! You saved my respect!!
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?
majd11 said:
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?
Click to expand...
Click to collapse
Right-click on the "Raw" button at the top-right corner, and select "Save link as".
huupoke12 said:
Right-click on the "Raw" button at the top-right corner, and select "Save link as".
Click to expand...
Click to collapse
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please
majd11 said:
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please
Click to expand...
Click to collapse
Read #3 and #13
(#13 is correct, he just downloaded a wrong python version)
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
my nokia phone is Ta-1032 mtk 6737 and the firmware in the link is mtk 6735 can I use this on my phone MTK 6737??
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
please can i use this on my nokia 3 mtk 6737 ?