Related
While trying some mods for Unite 2 , my phone got bricked, i must have done something wrong because those mods are working for others. so it was completely my mistake. so i spent my last 4 hours trying to find a solution and this is how i finally got it work.
JUST WANT TO REMIND YOU THAT TRY THIS GUIDE ON YOUR ON RISK, IM NOT GIVING YOU ANY GUARANTEE THAT IT WILL GOING UNBRICK YOUR DEVICE, IM JUST SHARING THE METHOD WHICH WORKED FOR ME
MY DEVICE
MICROMAX UNITE 2 4GB
KITKAT 4.4.2
following was the symptoms of my device only try this guide if yours are identical to mine
Phone was not booting up (nothing was happening no matter how long i press power button)
wasn't booting into to recovery mode also notification led was not turning on when plugged to PC (i.e No charging)
windows was making device plugged and unplugged sound over and over again when i was connecting it to pc using data cable
now from the 3rd point i figured out that my phone was being detected by my pc but only for a brief moment
so after searching for a while i found out that it was a problem with the PRELOADER and device was trying load META mode(donAt have any clue what that is) so i needed to Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools.
this is how i did it
Step 1 :Firstly Download MTK USB VCOM Drivers from here
DOWNLOAD
the extract it
Step 2 : Now open Device Manager in your PC by right clicking on My Computer and then click on Manage.
Step 3 :Next go to Device Manager in that and click on your PC name and then click on Add legacy hardware, see below
Step 4 : Now in Add Hardware Wizard click on Next >> Install the Hardware that i manually select from a list (Advanced) >> Show All Devices >> Next >>Have a Disk >> Browse, Now select the inf file according to your OS and from where you extracted the downloaded drivers.
Step 5 : Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.
Step 6 : After installation finish restart your PC.
Source
now remove battery of your phone and then plug it to your pc using data cable While Holding Volume up button
the windows will recognize it and install drivers, now open device manager and if you find a device under Ports(Com&LPT) which has Mediatek, MTK, USB, VCOM,PRELOADER keywords in it then you are good to go
now download SP Flash Tool
Devhost l Mediafire
and Factory rom
Download
and then extract the Factory rom archive
Then flash Stock ROM by following these steps:
Step 1: Open SP flash tool and load the Scatter file of Stock ROM it is inside the extracted factory rom folder
Step 2: Select Format all+Download in drop-down menu.
Step 3:Remove the battery of your phone.
Step 4:Click Download in SP Flash Tool.
Step 5:connect your phone to pc via USB cable while holding volume up button you can release volume button when the process is stared . Wait for flashing to complete .
Step 6: when the process is completed unplug the phone, insert the battery and then turn it one hopefully it should boot now and you should see Micromax logo just remember first boot take long time so just wait for it to completely boot
if this doesn't work then don't loose hope keep on searching for other ways ,
Nice one.... Will be helpful for some
Hi all i have new Lenovo PB1 770m I attempted to root it the TWRP was installed but it was not rooted
then I tried to update the firmware to the latest 151111 and no go, in the end i managed to delete the operating system so now I can boot to recovery mode only, When I try to restart it comes up with No OS Installed, I have tried to install xposed v79 sdk21 arm64zip no go, Ok now I know that I am an IDIOT for
not making a backup of original system and not cheking the firmware was the same as the root guide,
On the top of recovery screen is :- 2.8.7.7 SevenMaxs and TeamWin Recovery Project, I guess this could
be an expensive lesson, I have been looking for an original ROM with no luck so any help would be very
much appreciated, Thanks pluto1956, Mike
ps used info and files from here to try and root. http://forum.xda-developers.com/andr...oting-t3290347
UPDATE I managed to get a ROM from Russian site PB1-770M_S000156_150930_ROW_fastboot.7z 1.8gig
instructions say to be installed from computer via usb my problem is I can only access the internal storage or external SD card not the Usb-otg so it seems I can only update from the sd or internal memory
tried putting the rom on both but no go
Hi is there anybody that knows where and how to install the stock firmware for the phab PB1-770M
HELP
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
naeemdurrani said:
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Thanks brother, yesterday i downloaded one russian rom in zip format and there was a .bat file included in it. i only double clicked and it flashed through adb and fastboot and it was successfull. i got the operating system 5.0.2 but WLAN is not working, tried flashing several time but no luck. i learned that it is still under warranty ..so sent it to warranty. in a week it will be back with be for testing again hopefully.
well i will try your method as soon as i get my beast again. Thank you so much for helping out in timely manner, really appreciate it brother.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
---------- Post added at 08:10 AM ---------- Previous post was at 08:06 AM ----------
it is very easy my friend just look into the only topic/thread about Phab plus in xda. it will guide you well.
if you get any error in recovery like footer is wrong/signature verification failed. connect your phone and first check if your device in being tracked by adb. use adb devices.
if your device appear in the list of devices ..use fastboot oem unlock then flash sevenmax twrp again after entering into temporary twrp as per phab plus thread.
0verdaflow said:
How can you root this damn phones.... i was trying like for 2 days....
Click to expand...
Click to collapse
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
Could you please elucidate more? I downloaded the ROM and the flash program. However, I've no clue how to get going. I don't even see the xml files anywhere (as mentioned by you).
Just don't want to screw it up bad so being little more cautious.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Wakatsik said:
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
Click to expand...
Click to collapse
naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
i cant use the .bat cause my phone is already bricked...it wont be recognize by the app...the only way is thru QFIL but the problem is that i always get the error above
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
whiskey_1388 said:
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
Click to expand...
Click to collapse
My phone was wiped by me . I have TWRP and my phone is read as ADB interface (when in recovery mode). I tried adb devices and it returned 1f82f24b recovery. I also can access my phone memory from PC when in TWRP recovery which enables me to transfer files.
My problem is it is only read as ADB interface not as Qualcom COM port device. When I try Download_with_partition.cmd I get the error that it can not distinguish devices and to try. Any solution by those managed to install it successfully?
For everyone landing in this page due to wiping his OS of Lenovo Phab Plus by mistake (like I did), please refer to this thread:
Lenovo Phab Plus PB1-770M Stock ROM needed
Thanks!
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
I was not doing the 8936.mbn part!
By default it is 8916 so it doesnt work. but after changing that setting, it work!:highfive::good:
I can't unbrick
Hi!
I have a Lenovo Phab PB1-770M, this phone won't turn on, only Lenovo logo, or fastboot or flashmode.
With Flashtool i can't flash. In Fastboot i flash a recovery or operating system, i reboot the phone and again only the Lenovo screen, operating system not starting.
What can i do?
naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
this is what i get running the .bat command >
'adb' is not recognized as an internal or external command,
operable program or batch file.
╟δ╚╖▒ú╩╓╗·─▄╣╗╩╢▒≡adb╔Φ▒╕!╟δ╓╪╩╘úí
please ensure the phone can distinguish adb devices! Please retry!
Press any key to continue . . .
Hello,
tried to flash a custom OS and root on a ZTE Blade L3. I got CWM Recovery working and flashed a CM12.1 rom on it, after that, it failed to mount all partitions /cache etc. etc. then I restarted the phone and it bootloops + fades white immediatly!
Recovery or Bootloader etc. dont work
If I connenct the phone on my computer it connect, disconnnect, connect, disconnect and so on.
Anyone a solution or idea how I could save that?
I can help you, So first we have to know is it Hard bricked or just Soft bricked, In any case it's not hard to unbrick. Just follow these steps :silly:
1. Download SPFlashTool to your PC https://androidmtk.com/smart-phone-flash-tool
2.Download Drivers for MTK6582 (I hope I wrote the right MTK name) http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
3.Download stock firmware
http://r.srvtrck.com/v1/redirect?ur...ar&ad_t=advertiser&ad_zi=YieldLink&ad_dt=link
IF SOFT BRICKED:
-Update drivers with the one up there in the thread, Open SPFlashTool, Find scatter file (just a file with a .txt extension) and place it in Scatter file area in SPFlashTool (search on YouTube how to use SP), After you did that manually add the files that are missing ( it's usually the recovery and some other files that are missing), Then press download and AFTER that connected your phone with a USB cable! Then wait it to flash :victory: ,
IF HARD BRICKED:
-Remove battery,
-Connect to PC with USB cable
-It probably won't recognise your phone, so we need to enter so called META mode so we could flash the PRELOADER, to make the phone recognisable.
-To enter META mode remove battery( if you didn't), connect as I said up there, and try pressing and holding some buttons, I can't remember the correct combination that enters META mode but I think it was all buttons for 5 seconds, anyway you will know when you entered META mode if your PC recognises a change or if he finds the device :good:
-then enter SPFlashTool and flash the PRELOADER only (hope you know to use SPFlashTool)
-After that disconnect your phone and add battery
-Enter SPFlashTool and Flash whole system (all files except CACHE AND USER)
-You should be done ?
Hope it helps
Here's a total solution
https://androidfilehost.com/?fid=746010030569947486
Flash tool and stock ROM included. Just follow this:
1. unpack
2. run flashtool.exe
3. load scatter
4. click download
5. unplug your battery and plug the phone to your PC via USB
6. wait for process to finish and unplug your phone
7. Boot
P.S. I guess you'll need some drivers. Check the post above.
Good luck!
Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers
How to make emmc image sdcard..can u plz ilaborate...
jaschhabra said:
How to make emmc image sdcard..can u plz ilaborate...
Click to expand...
Click to collapse
Refer to the first link given in the post.
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
No idea how to resolve the issue you're facing. Shall let you know if I find any solution.
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
Me also stucked at the same problem any solution???
R4th0r3 said:
Me also stucked at the same problem any solution???
Click to expand...
Click to collapse
solved??
same problem
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.
Coolpad dazen 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me.
Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]
[email protected] said:
There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.
Click to expand...
Click to collapse
Link updated - - - https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
Imssk said:
Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]
Click to expand...
Click to collapse
No solution yet. Shall update if there's any.
[email protected] said:
Coolpad dazen 1
please help me.
Click to expand...
Click to collapse
Do hard reset and check.
After all the process..my phone is starting vibrating continuosly with emmc image sd card. without emmc sd card not any activites fully dead..woth any info on screen...no booting comes. no connecting fastboot mode (no any information on screen, fully blank & not charging show display. after connecting device to pc, device not detecting in pc, how to connecting device to pc? what to do now. please help me.
Zauq said:
No solution yet. Shall update if there's any.
Click to expand...
Click to collapse
Thanks for your quick response. I hope and request that you will soon find a working solution. because I have only one phone and that too is dead now. I hope you understand....
I successfully revived my dead phone by following this guide.Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all...:good:. Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices......:laugh: .....Also place the fastboot files before running the batch file.
---------- Post added at 09:37 AM ---------- Previous post was at 09:12 AM ----------
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this thread (to flash all the scattered file using batch file. fastboot files should be in that folder too)
If anybody tried and suceeded, then give a reply too
Zauq said:
Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers
Click to expand...
Click to collapse
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.
Khanalltech said:
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.
Click to expand...
Click to collapse
Following is the written by a Coolpad Daze 1 user who was able to revive his device. He was facing the same issue you're facing. First follow his method and later mine and see if it helps.
https://forum.xda-developers.com/ge...-dazen1-qualcomm-t3362253/page15#post72483446
(Quote:
Originally Posted by Avinash2
I successfully revived my dead phone by following this guide .Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all.... Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices...... .....Also place the fastboot files before running the batch file.....
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this link (to flash all the scattered file using batch file. fastboot files should be in that folder too and phone' driver should be installed)
If anybody tried and suceeded, then give a reply too)
I can suggest another idea i.e shorting pin method...
If phone is dead and want to flash , it can be done by QFIL .
By connecting phone in qualcomm HS Qdloader 9008, it can be achieved by shorting pin method...
But the thing is that i don't know which pin are to be shorted...
I tried finding in youtube, but didn't get for dazen 1.
Can anyone find those pin which are to be shorted
If your y5 2017 mya-l22 not booting, showing empty battery and loop but not charging...
Here is how to fix it...
Prerequisite:
You need SP drivers for this phone, find it on 4pda forum.
0. Make sure to disconnect the USB.
1. Download latest SP flash tool " search for it using Google"
2. Download b123 firmware from the link below , then extract it.
http://www.mediafire.com/file/77on9pxha4mzmmw/Huawei_y5_2017_MYA-L22_MT6737_C185B123_6.0.zip
3. Edit scatter file from b123 by deleting last 2 lanes,
"""
[huaqin]
CheckSum = 0xf302
"""
4. Open SP flash tool,press on Download tab, then Load the scatter file from b123 firmware ,it will take sometime.
5. Press the download button "Green arrow "
6. Now on phone, Press and hold the " down volume " button and plug the USB cable the flashing will start automatically .,,,, Keeeeeeep holding the down volume button until the " yellow" bar start to progress
Note1 : select "download only " I think it's enough , I by mistake chosen format all + download but that broke the imei and baseband :/ . There's a workaround but ". NEVER CHOSE FORMAT ALL + UPGRADE".
Note2 : make sure to make the firmware path and the scatter file path very short and of ASCII characters only to avoid problems,. For example c:/fw/scatter.txt
i have the same problem(its L125).I downloaded the firmware for l125 and flashed as per your instructions.But its still stuck in the loop.
I used the DA mtk all in one. Should i try format and flash?
anandumohan said:
i have the same problem(its L125).I downloaded the firmware for l125 and flashed as per your instructions.But its still stuck in the loop.
I used the DA mtk all in one. Should i try format and flash?
Click to expand...
Click to collapse
No, don't format, it will make it worse.
Are you sure that you have selected all partitions to before pressing download, and then it showed a "Success" message ? ,, you may try to repeat the process, it should work because it will restore the phone to the factory codition!
salembream said:
No, don't format, it will make it worse.
Are you sure that you have selected all partitions to before pressing download, and then it showed a "Success" message ? ,, you may try to repeat the process, it should work because it will restore the phone to the factory codition!
Click to expand...
Click to collapse
Yes I selected all the partitions and it showed a green tick with success.
anandumohan said:
Yes I selected all the partitions and it showed a green tick with success.
Click to expand...
Click to collapse
i have same problem to, my huawei y5 2017 cant stop blinking after instal twrp recovery.
and i try this step but still it keep blinking . pls help
salembream said:
If your y5 2017 mya-l22 not booting, showing empty battery and loop but not charging...
Here is how to fix it...
Prerequisite:
You need SP drivers for this phone, find it on 4pda forum.
0. Make sure to disconnect the USB.
1. Download latest SP flash tool " search for it using Google"
2. Download b123 firmware from the link below , then extract it.
http://www.mediafire.com/file/77on9pxha4mzmmw/Huawei_y5_2017_MYA-L22_MT6737_C185B123_6.0.zip
3. Edit scatter file from b123 by deleting last 2 lanes,
"""
[huaqin]
CheckSum = 0xf302
"""
4. Open SP flash tool,press on Download tab, then Load the scatter file from b123 firmware ,it will take sometime.
5. Press the download button "Green arrow "
6. Now on phone, Press and hold the " down volume " button and plug the USB cable the flashing will start automatically .,,,, Keeeeeeep holding the down volume button until the " yellow" bar start to progress
Note1 : select "download only " I think it's enough , I by mistake chosen format all + download but that broke the imei and baseband :/ . There's a workaround but ". NEVER CHOSE FORMAT ALL + UPGRADE".
Note2 : make sure to make the firmware path and the scatter file path very short and of ASCII characters only to avoid problems,. For example c:/fw/scatter.txt
Click to expand...
Click to collapse
Hi, can you give me the workaround on "format all + download ". I tried it and now I'm in Dip S**t (sorry for that) but I'm really frustrated right now. TIA
Hello, I have a problem I downloaded everything, but my phone does not start , I hold the " down volume" ,But there is only a logo and nothing happens, the pc has no contact except thanks to the usb hooking,scaler is correct? , the phone has stopped working after TWRP installation
Egooo said:
Hello, I have a problem I downloaded everything, but my phone does not start , I hold the " down volume" ,But there is only a logo and nothing happens, the pc has no contact except thanks to the usb hooking,scaler is correct? , the phone has stopped working after TWRP installation
Click to expand...
Click to collapse
It won't show any thing while flashing, if you did it correctly after flashing disconnect the USB cable then reconnect it ,,, better on charger and wait some time and turn on the phone
salembream said:
It won't show any thing while flashing, if you did it correctly after flashing disconnect the USB cable then reconnect it ,,, better on charger and wait some time and turn on the phone
Click to expand...
Click to collapse
I tried this, as although twrp was never installed, i had the same issue described - on charge it would show red led, battery logo, then black screen, red led and so on til infinity, i have had it on charge for 3 days with this cycle endlessly repeating.
The flashing with sp tool went fine, at least it reported it as successfully flashing, and when i put it on charge i just got the red led, without the battery symbol, yay!
But then I pressed the power button (not for the 3 secs required to power the phone on) and now its back in the same cycle as before, and when i try to use sp tool now, i get timeout errors or another vague one that says to check the power on the device, at any rate its not letting me try to flashing process again.
As it had no charge when the process worked, i'm not sure whats going wrong now :/
any pointers? thanks!
Mine worked... I had the same problem...
I used sp flash tools.. As we load the scatter files from the firmware folders. I loaded the scatter files..
Firstly I choosed only the boot files and e recovery files not the system files from the scatter file...because the battery was not charged....as it flashed i plugged in charge for about 30 minutes... Then i unplug it.. and then flashed the remaining files from the scatter files like system...
Then again i plugged it in charge... NOW it is showing battery icon and it is charging and percentage is increasing... It was zero(0) at initial....
I found out the problem is due to lack of charge of battery...
Thank you
U can email me at - [email protected]
Thank you
Fix boot problem
Dont wary. It worked for me with B126 firmware with sp flash tool.
Use mauimeta too for fixing invalid imei error.
salembream said:
If your y5 2017 mya-l22 not booting, showing empty battery and loop but not charging...
Here is how to fix it...
Prerequisite:
You need SP drivers for this phone, find it on 4pda forum.
0. Make sure to disconnect the USB.
1. Download latest SP flash tool " search for it using Google"
2. Download b123 firmware from the link below , then extract it.
http://www.mediafire.com/file/77on9pxha4mzmmw/Huawei_y5_2017_MYA-L22_MT6737_C185B123_6.0.zip
3. Edit scatter file from b123 by deleting last 2 lanes,
"""
[huaqin]
CheckSum = 0xf302
"""
4. Open SP flash tool,press on Download tab, then Load the scatter file from b123 firmware ,it will take sometime.
5. Press the download button "Green arrow "
6. Now on phone, Press and hold the " down volume " button and plug the USB cable the flashing will start automatically .,,,, Keeeeeeep holding the down volume button until the " yellow" bar start to progress
Note1 : select "download only " I think it's enough , I by mistake chosen format all + download but that broke the imei and baseband :/ . There's a workaround but ". NEVER CHOSE FORMAT ALL + UPGRADE".
Note2 : make sure to make the firmware path and the scatter file path very short and of ASCII characters only to avoid problems,. For example c:/fw/scatter.txt
Click to expand...
Click to collapse
thank you sir