Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool

Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool - Android General

Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers

How to make emmc image sdcard..can u plz ilaborate...

jaschhabra said:
How to make emmc image sdcard..can u plz ilaborate...
Click to expand...
Click to collapse
Refer to the first link given in the post.

After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
No idea how to resolve the issue you're facing. Shall let you know if I find any solution.

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
Me also stucked at the same problem any solution???

R4th0r3 said:
Me also stucked at the same problem any solution???
Click to expand...
Click to collapse
solved??

same problem
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.

Coolpad dazen 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me.

Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]

[email protected] said:
There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.
Click to expand...
Click to collapse
Link updated - - - https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing

Imssk said:
Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]
Click to expand...
Click to collapse
No solution yet. Shall update if there's any.

[email protected] said:
Coolpad dazen 1
please help me.
Click to expand...
Click to collapse
Do hard reset and check.

After all the process..my phone is starting vibrating continuosly with emmc image sd card. without emmc sd card not any activites fully dead..woth any info on screen...no booting comes. no connecting fastboot mode (no any information on screen, fully blank & not charging show display. after connecting device to pc, device not detecting in pc, how to connecting device to pc? what to do now. please help me.

Zauq said:
No solution yet. Shall update if there's any.
Click to expand...
Click to collapse
Thanks for your quick response. I hope and request that you will soon find a working solution. because I have only one phone and that too is dead now. I hope you understand....

I successfully revived my dead phone by following this guide.Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all...:good:. Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices......:laugh: .....Also place the fastboot files before running the batch file.
---------- Post added at 09:37 AM ---------- Previous post was at 09:12 AM ----------
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this thread (to flash all the scattered file using batch file. fastboot files should be in that folder too)
If anybody tried and suceeded, then give a reply too

Zauq said:
Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers
Click to expand...
Click to collapse
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.

Khanalltech said:
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.
Click to expand...
Click to collapse
Following is the written by a Coolpad Daze 1 user who was able to revive his device. He was facing the same issue you're facing. First follow his method and later mine and see if it helps.
https://forum.xda-developers.com/ge...-dazen1-qualcomm-t3362253/page15#post72483446
(Quote:
Originally Posted by Avinash2
I successfully revived my dead phone by following this guide .Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all.... Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices...... .....Also place the fastboot files before running the batch file.....
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this link (to flash all the scattered file using batch file. fastboot files should be in that folder too and phone' driver should be installed)
If anybody tried and suceeded, then give a reply too)

I can suggest another idea i.e shorting pin method...
If phone is dead and want to flash , it can be done by QFIL .
By connecting phone in qualcomm HS Qdloader 9008, it can be achieved by shorting pin method...
But the thing is that i don't know which pin are to be shorted...
I tried finding in youtube, but didn't get for dazen 1.
Can anyone find those pin which are to be shorted

Related

[GUIDE] Use Research Download (Spreadtrum ROM Flash)

How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip

Fail: Preserve Calibration fail (cannot find nv item in nv) What does it mean?
I just made up the PAC file with NV = mtd6.backupfixnv.yaffs2.img extracted from other phone (same model). This is what was supposed to be done isn't it? Is the error saying that I got a wrong nvitem file or something?
I couldn't extract nvitem.bin file so I just pointed it to the mtd6.backupfixnv.yaffs2.img file.
Thanks ...

Good Guide!
All steps are described clearly...
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
:victory:

brijeshep said:
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
Click to expand...
Click to collapse
Thanks for the feedback. I don't have one of those phones so i was not aware of that . Cheers

Not working for Micromax Bolt A34
Ravage32 said:
How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip
Click to expand...
Click to collapse
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.

Java Baba said:
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.
Click to expand...
Click to collapse
i have the same problem =/

soko89 said:
i have the same problem =/
Click to expand...
Click to collapse
Have you tried changing the budrate? For spreadtrum SP6820 the default is 115200 for other phones im not sure what i would be, have a go with different ones and see which ones work Cheers

Help Me Please...
Can you please help me by any way to add a new language to the .pac file.
I couldn't decompile the system.img file which extracted from the official .pac file by Research Download.
I just want any way to edit the extracted system.img or a way to create a custom system.img.
Note: I have another .pac file contain the wanted language but it doesn't work on the device.
Thanks in advance

For those who wants to make a .pac file from spreadtrum backup
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8

abhimortal6 said:
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8
Click to expand...
Click to collapse
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?

akisg said:
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?
Click to expand...
Click to collapse
its already a .pac file just rename it to " .pac " from " .p5c "

Pressed Play Button And connected my device..
but no any progress shown in Research download..plz help..

Make sure you have ALL the drivers installed correctly and that when u first connect it its showing up as somthing like "Spreadtrum phone" connected in your new devices popups. Probably good to restart the computer after you install the drivers. Are you using 64 or 32 bit? Ive had lots of troubles lately with 64bit windows 8 because drivers would not install because of signature verification. Works better on windows 7.

P5C file flash tool
Use this micromax A075 flash tool to flash .p5c file
salim

Getting FDL2 Error.sir plx help me..
Device-Karbonn A6

Need more info haha . Are you using different FDL's cuz some roms are able to use just a set of FDL's which can be used with all custom roms/flashing. If not and you have a pac file, most likely its not for you phone.

I have a T9500b htm and I have a doubt, in steps 5 and 6 what options must i select and what not. ? the phone block with to much unlock tries, I trying to do a factory restore. I don't want brick the phone.

cant use the spd tool
i flashed a wrong boot image to my phone (Itel 1502 , sp7731) using flashify. then after a reboot my phone got stuck on the boot menu just displaying the inote logo.
i thought on flashing a fresh stock rom.
but the problem is, after connecting my phone to the computer it displays windows cant recognise the usb device. then the spd tool displays that the device is unpluged.
please help.

Micromax A27/O+ 8.31 Android
Good Day Ms. / Mr. ?
I have O+ 8.31 android that are compatible with the OS of micromax a27.. I used this tool for flashing stock rom of my bootloop phone and it will be ok. But when i tried to uncheck some files and i only select boot logo to change the logo of stock rom of MM a27 after i flash the logo of O+ my phone is dead, i tried to switch on and it will never turn on and when i connect my phone in my computer, cannot be detected my phone even charging it is does not work?? I think i deleted the whole OS of my phone?? But the battery of my phone is full!! What can I do now to fix it?? Please help! ???? thanks for advice in advance! ??

hello sir. I've tried your guide but mine is on working. when i hit start download button their no progress of status showing or any happens. please help i want to flash O+ 8.96 phone.thanks

XOLO Q3000 Kitkat update

XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...

Reserved

Now thats exactly the way it is done....a perfect tutorial to get urself that Kitkat u have been waiting for.....thanks a lot Avi....

how to increase app install memory

I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
U cant flash it from cwm.
u have to use sp flash tools as everything has tobe changed.

avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?

baystallion said:
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
Click to expand...
Click to collapse
Yeah u can install custom recovery in kk.
Just see below in my signature - recovery collection.

sir ,i have error in installing;; "pmt change " again and again ,i change as your ...rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak " but error still stay. {my scatter image showing as -"MT6589_Android_scatter_emmc.txt.bak.txt "are they correct?]
any problem plz help me .

Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.

Updated successfully
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
Updated successfully from 4.2.1 to 4.4.2

avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
ravi_21 said:
Updated successfully from 4.2.1 to 4.4.2
Click to expand...
Click to collapse
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Have u installed vcom drivers correctly?
Try using another version of flash tool.

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
---------- Post added at 10:36 PM ---------- Previous post was at 10:28 PM ----------
ravi_21 said:
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
Click to expand...
Click to collapse
If still facing issue then copy content of scatter file given in link and replace the content in downloaded file and do the whole process again.

Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
---------- Post added at 11:15 AM ---------- Previous post was at 10:37 AM ----------
patilsb said:
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
But another problem "root asses goan" .there is superuser app. In my system ,but not working .unrooted phone-exSD card not mounted, can I root my divice by RootGenios?(but ex SD partition is mounted)
Sent from my Q3000 using xda app-developers app

avi3230 said:
XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Click to expand...
Click to collapse
hi avisir,
i install root genios and try 2/3 time but my phone not rooted [ error -root failed root manually]
what can i do for this? when i install kitkat, that time i saw super user then i update Vroot,...then unfortunetlly super user goan.
i tried framroot /mtkdroid tool but no effect....

Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.

baystallion said:
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
Click to expand...
Click to collapse
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.

avi3230 said:
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
Click to expand...
Click to collapse
Avi, well it just worked for me.. I currently have a working SuperSU install following the procedure I'd mentioned
Just so we are clear, the problem here is that, once kk ROM is installed, the superuser app will show that the phone is rooted. After some time, opening the app will show that the phone is unroofed.. I'm sure this is not an issue with the super user app but something else.. But flashing SuperSU as I said in my last post fixes root which is what I wanted..
If you know the actual root cause, I want to know about it..

[GUIDE]How to Unbrick Micromax Canvas A111

How To Unbrick Micromax Canvas Doodle A111:silly:
=DOWNLOADS=
1. Drivers (Extract in any folder in Laptop/PC)
Link:--- http://www.mediafire.com/download/9bhiadqhxfdvk3i
Mirror: --- https://www.dropbox.com/s/0y76eee6ddka1zx/USB Modem Driver MitoA355.zip
2. Tool : Roadkil’s Disk Image
Download from Website --- http://www.roadkil.net/program.php?ProgramID=12&Action=NewOSID&DownloadVersion=9&Installer=NO
3. Unbricking Files(only for those who have bricked devices)
Link(Mediafire) --- https://www.mediafire.com/folder/buffvd5d4u09x
Link(Dropbox) --- https://www.dropbox.com/sh/1rry5fvjb4vgh1d/AAB5CFcJ4tbUjg1Zf7GWvH1Aa
Download all 5 files, then join with hjsplit and extract the resulting rar file.
=PROCEDURE=
I. Step 1: Preparation connected to PC / Laptop
a. Make sure that no other devices connected to the USB port, if there is still please remove first, such as USB flashdisk, External Hard Drive, etc
b. Remove the battery, SDcard, and the SIM Card from SmartPhone.
c. Connect your phone to your Laptop / PC, press and hold the Volume Buttons(Vol+ and Vol-) for approximately 15 seconds.
d. When in the PC / Laptop asked for drivers, install drivers downloaded from above.
When in win XP, make sure in your PC / Laptop detected as Qualcomm HS-USB Diagnostic 9006
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When in win7, maybe detected as Qualcomm CDMA Technologies MSM,
try to reinstall the driver and make sure to connect the port 9006.
e. If after installing the driver, a warning appears to format the disk, select Cancel.
II. Step 2: How to Backup and Restore image
a. How to Backup (Save Smartphone image to Laptop/PC)(only for those who want to take a backup as precautionary measure.)
Open Roadkil’s tool, see image below.
Click menu: Store Image
At Read Image: Phisycal Disk 1 (3.61 GB) ---> beware, do not select the wrong disk
On Target File, click Browse to select the img file storage location later
Click Start, wait until finished (about + 25 minute)
The results of the image file by + 3,78 GB
b. How to Restore image file to Smartphone(for those who have bricked devices).
Open Roadkil’s tool,
Click menu: Write Image
at Write Image to: Phisycal Disk 1 (3.61 GB) ---> beware, do not select the wrong disk
at Source File, click Browse to select the location of the results of the previous backup image file or that downloaded image file.
Click Start, wait until finished (about + 25 minute)
When finished, unplug the USB cable, plug it back the Battery, SDcard, SIM Card, and then try to restart your Smartphone ……
Congratulations, you're back to normal Smartphone ...:good::good::good::highfive:
=VIDEO GUIDE=(Thanks to Raja Shekar)
=CREDITS=
Ommet Cah Kendal

Seems incorrect
chinmaysharma said:
How To Unbrick Micromax Canvas Doodle A111:silly:
=DOWNLOADS=
1. Drivers (Extract in any folder in Laptop/PC)
Link:--- http://www.mediafire.com/download/9bhiadqhxfdvk3i
Mirror: --- https://www.dropbox.com/s/0y76eee6ddka1zx/USB Modem Driver MitoA355.zip
2. Tool : Roadkil’s Disk Image
Download from Website --- http://www.roadkil.net/program.php?ProgramID=12&Action=NewOSID&DownloadVersion=9&Installer=NO
3. Unbricking Files(only for those who have bricked devices)
Link(Mediafire) --- https://www.mediafire.com/folder/buffvd5d4u09x
Link(Dropbox) --- https://www.dropbox.com/sh/1rry5fvjb4vgh1d/AAB5CFcJ4tbUjg1Zf7GWvH1Aa
Download all 5 files, then join with hjsplit and extract the resulting rar file.
=PROCEDURE=
I. Step 1: Preparation connected to PC / Laptop
a. Make sure that no other devices connected to the USB port, if there is still please remove first, such as USB flashdisk, External Hard Drive, etc
b. Remove the battery, SDcard, and the SIM Card from SmartPhone.
c. Connect your phone to your Laptop / PC, press and hold the Volume Buttons(Vol+ and Vol-) for approximately 15 seconds.
d. When in the PC / Laptop asked for drivers, install drivers downloaded from above.
When in win XP, make sure in your PC / Laptop detected as Qualcomm HS-USB Diagnostic 9006
When in win7, maybe detected as Qualcomm CDMA Technologies MSM,
try to reinstall the driver and make sure to connect the port 9006.
e. If after installing the driver, a warning appears to format the disk, select Cancel.
II. Step 2: How to Backup and Restore image
a. How to Backup (Save Smartphone image to Laptop/PC)(only for those who want to take a backup as precautionary measure.)
Open Roadkil’s tool, see image below.
Click menu: Store Image
At Read Image: Phisycal Disk 1 (3.61 GB) ---> beware, do not select the wrong disk
On Target File, click Browse to select the img file storage location later
Click Start, wait until finished (about + 25 minute)
The results of the image file by + 3,78 GB
b. How to Restore image file to Smartphone(for those who have bricked devices).
Open Roadkil’s tool,
Click menu: Write Image
at Write Image to: Phisycal Disk 1 (3.61 GB) ---> beware, do not select the wrong disk
at Source File, click Browse to select the location of the results of the previous backup image file or that downloaded image file.
Click Start, wait until finished (about + 25 minute)
When finished, unplug the USB cable, plug it back the Battery, SDcard, SIM Card, and then try to restart your Smartphone ……
Congratulations, you're back to normal Smartphone ...:good::good::good::highfive:
=CREDITS=
Ommet Cah Kendal
Click to expand...
Click to collapse
The files attached to this post seems to be for MitoA355 not for A111.
Please clarify the situation.

rishabhgangwar said:
The files attached to this post seems to be for MitoA355 not for A111.
Please clarify the situation.
Click to expand...
Click to collapse
they both are perfect clones and their os works without porting so i posted mito's files

my mobile got bricked up never switched on again????even it didnt now show the store location ??
---------- Post added at 04:31 AM ---------- Previous post was at 03:56 AM ----------
my mobile got bricked up never switched on again????even it didnt now show the store location ??even the chipset store location doesnot turn on ? how to fix it>?

ravigandhiarul said:
my mobile got bricked up never switched on again????even it didnt now show the store location ??
---------- Post added at 04:31 AM ---------- Previous post was at 03:56 AM ----------
my mobile got bricked up never switched on again????even it didnt now show the store location ??even the chipset store location doesnot turn on ? how to fix it>?
Click to expand...
Click to collapse
did you follow procedure correctly?

yep every step ! the disk writer stucked in nowere between the writing process and everything went off
!!

ravigandhiarul said:
yep every step ! the disk writer stucked in nowere between the writing process and everything went off
!!
Click to expand...
Click to collapse
retry or if not working then try using a different pc

how to fix 3g ??

dont get worry both are same chipsets it will supports mito a355 and canvas a111 both are same

Hello,
How about to unbrick Doddle 2 A240? what files do I need to I just follow the same procedures?
Thanks. My phone is half bricked. I can still turn it on but it always says that SYSTEM UI FAIL. But if i try to access RECOVERY MODE, it shows the dead android or the bricked picture. However, I can still turn it off then turn the device on but it's useless because of the SYSTEM UI failure.
Kindly help.

K what is a240 is configuration

Please upload mmx A87 unbricking files
I have MMX a87 which is hard bricked..only qdload 9008 is showing. Plz help me :'((

rquest
please remove quoted message if u post like that thread going brick

watch video here to unbrick here https://www.youtube.com/watch?v=35E21Vi_ddE
:good::good::fingers-crossed::fingers-crossed:

sheikhrr said:
I have MMX a87 which is hard bricked..only qdload 9008 is showing. Plz help me :'((
Click to expand...
Click to collapse
how did it get bricked?

Hovatek said:
how did it get bricked?
Click to expand...
Click to collapse
It just got got brick while I was flashing custom ROM (thanks to their system formating suggestion which made my device paperweight ) by mistake I formated splash partition...from that time my device is hard bricked... I have only one hope "Qpst"...but don't know..which files I need to work with it...I am not familiar with Qpst :'( sombuddy helllllppppp :'(

hey
by mistakely i had formated my micromax a111.................plzzz help its not working

I see "Qualcomm HS-USB Diagnositcs 9008" as my driver and not 9006. Also toolkit is not detecting as additional dirve, what may be the reason.

hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out

Hey..whenever i connect my phone to pc..it is showing unknown device and driversr are not being updated..(Windows7) please help me

[Tutorial] QHSUSB_DLOAD Hardbrick Fix for I9505

Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.

i can dbrick s4mini gt-i9195 please help

It will work with my Galaxy S4 Active (SHV-E470s)?

Can you force the QHSUSB_DLOAD
Help !!!
After trying the procedure, I did not timely drag the files !!! Now it turns green all the green screen, but when I connect it to the pc no holes detected no door !!! Can you force the QHSUSB_DLOAD or Qualcomm HS-USB QDLoader 9008 ???? Sorry my bad english !!!
It is also possible for s4 mini i9195 ????

Thank you so much ,it worked for me on Windows 7. Galaxy s4 I9505.

thank you soooooooooooooooooooooooo much.!?

video please please

After trying this method . Don't u suffer from any display problem ? I tried this and it worked for me but i have now display problem . it's a little yellow and it appears always download mode .

Can I backup my phone when in download mode?

i got status 29 error: system could not write the files to specified device please help

Can this be made for a i9195 model???

kent8hd said:
Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.
Click to expand...
Click to collapse
Plz help me i am using this tutorial to fix my p5100 device but it shows permission denied . Other then samsung note 4 repair tool , I got appropriate things for my device. Plz help

Thank you a lot! It worked!
It took me a bit of time, this is my extra info for others:
- When doing the step 3, a command window with scrolling text will appear with 2 lines. You must do the copy paste thing BEFORE the text starts rolling as that indicates it started using those files. If no window with text opens, try again
- With odin I had 2 problems: One, that it was failing to do the copying, the reason was that I was using a wrong ROM. Second was that a ROM was written, but it was the incorrect one so I had to start again from step 0.
So try a different ROM.
I read the cable may be a problem too, but it wasn't in my case.
In between retries and after succeeding, removing the usb cable AND the battery may help.