XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Reserved
Now thats exactly the way it is done....a perfect tutorial to get urself that Kitkat u have been waiting for.....thanks a lot Avi....
how to increase app install memory
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
patilsb said:
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
U cant flash it from cwm.
u have to use sp flash tools as everything has tobe changed.
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
baystallion said:
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
Click to expand...
Click to collapse
Yeah u can install custom recovery in kk.
Just see below in my signature - recovery collection.
sir ,i have error in installing;; "pmt change " again and again ,i change as your ...rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak " but error still stay. {my scatter image showing as -"MT6589_Android_scatter_emmc.txt.bak.txt "are they correct?]
any problem plz help me .
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
patilsb said:
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Updated successfully
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
Updated successfully from 4.2.1 to 4.4.2
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
ravi_21 said:
Updated successfully from 4.2.1 to 4.4.2
Click to expand...
Click to collapse
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Have u installed vcom drivers correctly?
Try using another version of flash tool.
patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
---------- Post added at 10:36 PM ---------- Previous post was at 10:28 PM ----------
ravi_21 said:
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
Click to expand...
Click to collapse
If still facing issue then copy content of scatter file given in link and replace the content in downloaded file and do the whole process again.
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
---------- Post added at 11:15 AM ---------- Previous post was at 10:37 AM ----------
patilsb said:
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
But another problem "root asses goan" .there is superuser app. In my system ,but not working .unrooted phone-exSD card not mounted, can I root my divice by RootGenios?(but ex SD partition is mounted)
Sent from my Q3000 using xda app-developers app
avi3230 said:
XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Click to expand...
Click to collapse
hi avisir,
i install root genios and try 2/3 time but my phone not rooted [ error -root failed root manually]
what can i do for this? when i install kitkat, that time i saw super user then i update Vroot,...then unfortunetlly super user goan.
i tried framroot /mtkdroid tool but no effect....
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
baystallion said:
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
Click to expand...
Click to collapse
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
avi3230 said:
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
Click to expand...
Click to collapse
Avi, well it just worked for me.. I currently have a working SuperSU install following the procedure I'd mentioned
Just so we are clear, the problem here is that, once kk ROM is installed, the superuser app will show that the phone is rooted. After some time, opening the app will show that the phone is unroofed.. I'm sure this is not an issue with the super user app but something else.. But flashing SuperSU as I said in my last post fixes root which is what I wanted..
If you know the actual root cause, I want to know about it..
Related
This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html
vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.
senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
plz also have a look at previous posts u will get your answer.
senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:
bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.
Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium
bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:
Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
@bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?
HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools
HOW TO FLASH CMW RECOVERY
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 download link https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...
reserved
xolo q2000
reserved 2
xolo q2000
A step-by-step guide would be very helpful.
Thanks.
Major
i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium
salil.bajaj said:
i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files
nileshtambe said:
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files
Click to expand...
Click to collapse
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
To enter recovery....
Press Vol+ & Power Buttons...
Keep them pressed till you enter recovery screen...
like mentioned above Vol+ key is enter key while in recovery mode.
Major.
---------- Post added at 03:50 PM ---------- Previous post was at 03:44 PM ----------
nileshtambe said:
HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools download link for cmw recovery http://ge.tt/6OY1CJ01/v/5?c
cmw twrp recovery by wong yuweng download link http://ge.tt/6OY1CJ01/v/01?c
who wanna try TWRP 2.6.3.0 however you might brick it...
Refer to this mod, must follow or you will loose you IMEI...
http://www.mediafire.com/view/?7humxw5eb99404u
if secro.img report oversize then use this one here...
http://d-h.st/oGZ
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 downloa link will up ...
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...
Click to expand...
Click to collapse
Its showing ADB Interface not Composite device...help required
How to install drivers????
---------- Post added at 04:04 PM ---------- Previous post was at 03:50 PM ----------
Never mind problem solved....
Windows 7 installs drivers automatically
No need to install them seperately.
Just keep in mind though...run the contents of root Xolo q2000 from root of any drive (i.e not from any folder)
This should do the trick...
Enjoy !!!
Thanks Nilesh...
salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
hard reset done many times otg is not working in my case
yes i got scratch guard with phone but not put on phone immediately when i given phone box for billing that person removed it from box
i came to know when i opened box at home but person who sold me in shop is good friend of mine he said he will give me another one .
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
use this scatter file http://ge.tt/374Dzm01 and recovery file ctr.7z http://ge.tt/6OY1CJ01/v/01?c
what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium
salil.bajaj said:
what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
don't know its created by mtk droid tool while taking phone backup of stock rom
majorraj2003 said:
A step-by-step guide would be very helpful.
Thanks.
Major
Click to expand...
Click to collapse
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
note
twrp is not flashing and recovery by wong is not working so i am removing from 1st post .
Please help me
Hi Guys,
Could you please help me where I can get this device in Hyderabad? Is it available in white? IS it a best buy phone or shall I go for Gionee E6 or E3. Please all help me.
will you please provide the stock rom of this device?
can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium
salil.bajaj said:
can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
http://ge.tt/7AFaVV61/v/0?c
A big problem
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?
salil.bajaj said:
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?
Click to expand...
Click to collapse
i will give you system img to flash with sp tool let me upload it
nileshtambe said:
i will give you system img to flash with sp tool let me upload it
Click to expand...
Click to collapse
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you
salil.bajaj said:
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you
Click to expand...
Click to collapse
select scatter file and flash only system that will do the job
https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing
Micromax canvas doodle 3 a.k.a A102 was released recently, a budget android phone or phablet. With a Meditek MT6572 processor and Android 4.2.2 stock.
Development thread for a local market phone exists rarely, and that rare thread is created by me[emoji15] .
Prime
Rooting Micromax Canvas Doodle 3 A102 with 1GB RAM Kitkat 4.4.2
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Kindly find the images of SP Flash & the flashed recovery.
It's for reference and guide.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanxxxxxxxx
was very helpfull ,,,,doodle 3 kitkat version root.......................try it,,,, its work for kitkat ota
Rooting Micromax canvas Doodle 3 .....
Friends if anyone is getting difficulty in going to recovery mode using Power+Volume up button
Download adb setup zip file from below and install the adb setup
then
goto Command Prompt and type
adb reboot recovery
your phone will goto recovery mode automatically
then rest is given in above post.
dont forget to ht thanks if helped.
Finaly root
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
thanks bro,
finaly root my doodle 3 updated kitkat 1gb ram
i use below attached scatter file
MIUI ROM for Micromx Canvas A102
Here it Comes
MIUI ROM for Micromax Canvas Doodle 3 with 1GB ram
IS NO MORE WORKING
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
your above steps are not working in my phone a102 ,doodle 3...i had recently upgarded to kitkat 4.4.2 .......none of the methods or rootapps are working for rooting this device
pls sir can you make one video tutorial for rooting this device with the above version of OS...asap
Rooting Micromax canvas Doodle 3 .....
damianlepcha said:
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone
Click to expand...
Click to collapse
Use following Link to Download the latest version of SP flash Tools and retry with the scatter file and recovery image given.
This will let you download recovery to your handset and getting Root.
copy and paste this link to your browser and download .. d-h.st/weue
couldn't reboot into recovery mode from doodle 3
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance
Tapan Arya said:
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance
Click to expand...
Click to collapse
Use Mobileuncle tools or Rebooter app for reboot into recovery mode.
I already used but doesn't works
Tapan Arya said:
I already used but doesn't works
Click to expand...
Click to collapse
If you are rooted then have u installed the CWM provided in Post #2
install using Mobileuncle tools
then root
Dont Forget to Endale USB Debugging mode from developer options
and reboot to recovery from mobile uncle tools.
It should reboot into recovery. if not then tell me what any error is coming ??
Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts
Tapan Arya said:
Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts
Click to expand...
Click to collapse
Just try to reinstall the recovery using mobileuncle tools and then reboot.
Hope it will work
I just tried to and updated recovery from mobile uncle but it shows as before
Please Help apk
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
just copy and paste them in /system/app and change permissions to rw- r-- r-- and reboot
and for camera just restore factory settings if it didnt helped then reflash the stock Rom (System Only) and done.
Dont forget to backup your IMEI before doing anything.
osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
Use ESfile Explorer to Copy it to system folder and change permissions..
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
baskye said:
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
Click to expand...
Click to collapse
I am glad to see first person who rooted with the help of my tutorial and files. That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. Will be around for more developement and roms.
Success!
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Using the note for about 2weeks. Rooted successfully. Titanium backup is not working properly. Any solution for it.
Also the network refresh is poor. So network switching is very slow and many times have to manually do refresh or reboot.
latest twrp recovery
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
flashing the preloader is not necessary though is it?
Yes it is not necessary
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
mojahun said:
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with
"Searching drivers for YunOS system"
and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like
"YunOS ACB Interface"
Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)
So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.
baskye said:
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
Click to expand...
Click to collapse
Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode.
Ito_ said:
flashing the preloader is not necessary though is it?
Click to expand...
Click to collapse
No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms
sandeep101 said:
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
Click to expand...
Click to collapse
YEAH! I am always around in XDA, for the phone in my hand Thanks for appreciation
SCATTER file and Recovery for two more clone models.
Hi A L L!!!
Posted SCATTER file and Recovery for two more clone models.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
Choose wisely.
Nothing happening
cmahendra said:
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
Click to expand...
Click to collapse
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Techminator said:
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Click to expand...
Click to collapse
Seems drivers are not properly installed. These are new drivers by iBerry.
1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.
Hope this helps and inform if works.
PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.
Rooted!
cmahendra said:
Seems drivers are not properly installed. These are new drivers by iBerry.
Click to expand...
Click to collapse
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Techminator said:
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Click to expand...
Click to collapse
I dont use or recommend Xposed FW. You can use as per your requirement. Works fine.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
Yes, flip cover by iBerry is costly and even I am also looking for low-cost option.
falcon.prj said:
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Click to expand...
Click to collapse
For icons size to change use any other launcher, like google now or nova or any other you want.
Move Titanium App to internal memory or install Link2SD, check settings and then install Titanium Backup. plz google for more info on titanium.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
baskye said:
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
Click to expand...
Click to collapse
Thanks a lot for this good tip/method. +1 plz post link to exact file/version.
Here is the download link
http://download.clockworkmod.com/superuser/superuser.zip
Does not work
This method does not work after I download and flash with the latest firmware (13 Oct 2014) from iBerry site.