Database Info

INSTALLING CWM on ZOPO ZP900 LEADER

This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.

reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html

vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.

B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!

Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download

help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:

miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.

senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,

From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium

Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium

vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps

plz also have a look at previous posts u will get your answer.

senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try

Hey guys, I want to try this on my hero 9300+.
Is it safe?

Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.

Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium

vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:

bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.

Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium

bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:

Micromax A52 ROOTED!!!!

So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:

Great work bro. If you have given this before 1 day. I may not flash my A52 with Russian Rom of Fly mobile...
...
Please upload the full backup rom of A52 after rooting Complete Anybody...
I have lost my A52 backup.

Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app

vshlkmr said:
So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
Good work u kickd the micromax:thumbup:
sent from my rooted a52

vshlkmr said:
Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
Yes My A52 working. But it is all now Fly Like view. All boot logos are of fly. Yes it is rooted but I want the original rooted stock ROM of MMX A52. If you can help it will be great.

Pls post full rom some people unable to switch 3g to 2g or 2g to 3g
Thanks
sent from my rooted a52

Now we try for a up-gradation to ICS.

helloansuman said:
Now we try for a up-gradation to ICS.
Click to expand...
Click to collapse
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52

For all of you who need The stock rom check out The a52 indiedevers group page on fb...
Then flash The stock rom and then flash my boot.img..you will get everything Micromax + root..
Sent from my Karbonn_A18 using xda app-developers app

piracyhater said:
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52
Click to expand...
Click to collapse
A52's ram and screen is really low to meet ics requirements..
Sent from my Karbonn_A18 using xda app-developers app

bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit

Finally I too got it rooted, used only bootimg option for spflash tool. and refer to op attached img file. it works...!!!!!
method works.. I recd brom error after flashing but on using unlockroot it worked
so ignore the error if u like to risk.
kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
:good:

kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
Select The bootimg option, then click on The option and select The path of my modified boot.img file, then connect your phone and flash it!!!
& Yeah if you want you can again un root your device by just pressing The un root button on The unlockroot programme you rooted with!! No need of flasing The original boot.img!
Sent from my Karbonn_A18 using xda app-developers app

Nothing happen when i click to download ADB drivers

kartikoli said:
Nothing happen when i click to download ADB drivers
Click to expand...
Click to collapse
Then download and install super-one-click root, it'll do everything for you..
Link->
http://forum.xda-developers.com/showthread.php?t=803682
Sent from my Karbonn_A18 using xda app-developers app

i have already tried it but the problem is with the drivers as it cant find the device
---------- Post added at 06:49 AM ---------- Previous post was at 05:55 AM ----------
rooted the device ... thanks for every thing
when i run new version of super1click then it asked me to install drivers and then later used unlockroot to root the device
now customizing and freeing the phone with Root Uninstaller Pro
Bro if you dont mind then can you post this root on androidforums so that users can get max search results
---------- Post added at 07:33 AM ---------- Previous post was at 06:49 AM ----------
Help plzzzz i have freezed few apps using uninstaller pro and now my phone doesnt boots to desktop. i can see the boot anomation but it get stuck on that screen
please help me

I root my phone following process it stuck on 99% and when I boot it shows only welcome screen im on and off and on many time my phone on since last night but no progress pls help is my phone going to die pls help no body answer me pls help me developers

Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd

helloansuman said:
Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd
Click to expand...
Click to collapse
You wanna backup The mtd partitions eh? Well download terminal emulator from play store u can use these commands in that
Sent from my Karbonn_A18 using xda app-developers app

[email protected] bro any plan to release first ROM for this phone

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)

I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:

I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.

when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....

could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400

RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again

najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread

bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx

RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored

can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks

simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.

Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space

AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app

Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app

Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app

New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...

najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one

root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?

bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software

atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

CWM recovery v6.0.3.0 for canvas 4

Here is cwm recovery for Canvas 4 it is v6.0.3.0.
I am not resposible if your phone catches on fire or gets bricked!
Use via SP tools or MobileUncle...Flashing via fastboot wont work since size is too large.. the same error will come in sp tools, just ignore it and continue installation.
For SP tools,
click scatter file and direct it to the given scatter file
2) unselect everything other than recovery
3) double click on recovery and direct it to the recovery download in the post
4) click download on the top ignore all warnings and connect your phone(it should be switched off).
5) wait for green ring to appear
6)hold the power and the 2 volume buttons(when switched off) to check if the recovery got flashed properly or not
For mobileUncle:
1)Transfer the recovery.img to root of your sd card
2)The, click on mobileuncle tools and grant it root permissions
3)Click on recovery update and click the img, click flash recovery and select ok.
4)click yes on reboot to recovery option @robinsahlot i need help bro
If any problem please PM me, Thank me if it worked!

MasterAwesome said:
Here is cwm recovery for Canvas 4 it is v6.0.3.0.
I am not resposible if your phone catches on fire or gets bricked!
Use via SP tools or MobileUncle...Flashing via fastboot wont work since size is too large.. the same error will come in sp tools, just ignore it and continue installation.
For SP tools,
click scatter file and direct it to the given scatter file
2) unselect everything other than recovery
3) double click on recovery and direct it to the recovery download in the post
4) click download on the top ignore all warnings and connect your phone(it should be switched off).
5) wait for green ring to appear
6)hold the power and the 2 volume buttons(when switched off) to check if the recovery got flashed properly or not
For mobileUncle:
1)Transfer the recovery.img to root of your sd card
2)The, click on mobileuncle tools and grant it root permissions
3)Click on recovery update and click the img, click flash recovery and select ok.
4)click yes on reboot to recovery option @robinsahlot i need help bro
If any problem please PM me, Thank me if it worked!
Click to expand...
Click to collapse
yes my friend
how may i help u

It says it can't open /tmp/recovery . log....
Sent from my A210 using XDA Premium 4 mobile app

It says can't open recovery.log
Sent from my A210 using XDA Premium 4 mobile app

MasterAwesome said:
It says can't open recovery.log
Sent from my A210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
give me sometime i wil check it out
---------- Post added at 11:02 AM ---------- Previous post was at 10:55 AM ----------
hey bro
Just creat a /tmp folder on your sdcard and try it again
hope it works

./

robinsahlot said:
give me sometime i wil check it out
---------- Post added at 11:02 AM ---------- Previous post was at 10:55 AM ----------
hey bro
Just creat a /tmp folder on your sdcard and try it again
hope it works
Click to expand...
Click to collapse
Doesnt work, i tried

MasterAwesome said:
Doesnt work, i tried
Click to expand...
Click to collapse
i have ported 6.0.2.8 recovery to CANVAS 4 WORKING FULLY
SHANE

Shane said:
i have ported 6.0.2.8 recovery to CANVAS 4 WORKING FULLY
SHANE
Click to expand...
Click to collapse
Dude, can you try and diagnose the problem in mine, why it's saying can't open tmp/recovery.log?
Sent from my A210 using XDA Premium 4 mobile app

And, what's the link for your port?
Sent from my A210 using XDA Premium 4 mobile app

XOLO Q3000 Kitkat update

XOLO Q3000 KITKAT 4.4.2 update​
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites ​
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.​
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITS​hadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...

Reserved

Now thats exactly the way it is done....a perfect tutorial to get urself that Kitkat u have been waiting for.....thanks a lot Avi....

how to increase app install memory

I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
U cant flash it from cwm.
u have to use sp flash tools as everything has tobe changed.

avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?

baystallion said:
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
Click to expand...
Click to collapse
Yeah u can install custom recovery in kk.
Just see below in my signature - recovery collection.

sir ,i have error in installing;; "pmt change " again and again ,i change as your ...rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak " but error still stay. {my scatter image showing as -"MT6589_Android_scatter_emmc.txt.bak.txt "are they correct?]
any problem plz help me .

Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.

Updated successfully
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
Updated successfully from 4.2.1 to 4.4.2

avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
ravi_21 said:
Updated successfully from 4.2.1 to 4.4.2
Click to expand...
Click to collapse
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Have u installed vcom drivers correctly?
Try using another version of flash tool.

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
---------- Post added at 10:36 PM ---------- Previous post was at 10:28 PM ----------
ravi_21 said:
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
Click to expand...
Click to collapse
If still facing issue then copy content of scatter file given in link and replace the content in downloaded file and do the whole process again.

Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
---------- Post added at 11:15 AM ---------- Previous post was at 10:37 AM ----------
patilsb said:
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
But another problem "root asses goan" .there is superuser app. In my system ,but not working .unrooted phone-exSD card not mounted, can I root my divice by RootGenios?(but ex SD partition is mounted)
Sent from my Q3000 using xda app-developers app

avi3230 said:
XOLO Q3000 KITKAT 4.4.2 update​
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites ​
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.​
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITS​hadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Click to expand...
Click to collapse
hi avisir,
i install root genios and try 2/3 time but my phone not rooted [ error -root failed root manually]
what can i do for this? when i install kitkat, that time i saw super user then i update Vroot,...then unfortunetlly super user goan.
i tried framroot /mtkdroid tool but no effect....

Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.

baystallion said:
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
Click to expand...
Click to collapse
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.

avi3230 said:
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
Click to expand...
Click to collapse
Avi, well it just worked for me.. I currently have a working SuperSU install following the procedure I'd mentioned
Just so we are clear, the problem here is that, once kk ROM is installed, the superuser app will show that the phone is rooted. After some time, opening the app will show that the phone is unroofed.. I'm sure this is not an issue with the super user app but something else.. But flashing SuperSU as I said in my last post fixes root which is what I wanted..
If you know the actual root cause, I want to know about it..