Database Info

INSTALLING CWM on ZOPO ZP900 LEADER

This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.

reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html

vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.

B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!

Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download

help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:

miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.

senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,

From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium

Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium

vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps

plz also have a look at previous posts u will get your answer.

senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try

Hey guys, I want to try this on my hero 9300+.
Is it safe?

Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.

Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium

vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:

bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.

Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium

bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:

Micromax a78!! Rooted!!!!

MICROMAX A78 ROOTED!!!
Guys!!! Micromax a78!! rooted!!!
So, here are the steps on getting root access on MICROMAX A78-
What you need
1. MICROMAX A78, data usb cable.
2. Download the Rooted Boot image file from the attachment below this post.
3. Download SP Flash Tool v2.1 from HERE.
4. Download MTK65xx Driver from HERE.
5. Download the MTK6573 Scatter.txt file from the attachment below this post.
6. Lastly download SuperOneClick root application for windows (search google), and install it...it will also install the adb drivers needed while rooting.
Installation Steps-
1. Unzip and Install the MTK65xx USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and connect using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Do not switch on the phone
2. Copy the "rootedboot.img" file that you downloaded from my attatchment. Rename it to be boot.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6573_Android_scatter. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "BOOT". Leave boot checked. Now click on the "BOOT" just right to the checkbox and browse and select the boot.img (which was earlier rootedboot.img) file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this then Congrats You have flashed the unlocked boot.img!
NOW FOR ACTUAL ROOTING:
1. Restart your phone, now when the phone boots up, enable "usb debugging".
2. Now run SuperOneClick, and click "root"..after the process finishes, the a78 will be fully rooted with Superuser app installed!!.
Check by installing root checker from play store!!!
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits!
I, Me, Myself
GUYS! If u think my hardwork is worth something, do press the "Thanks" button below! Thank You! :fingers-crossed:

awesome work !!!
thankyou buddy !!! my phone is finally rooted now waiting for a custom recovery ........

I'll also make a custom recovery if you are interested
Sent from my Micromax A110 using xda app-developers app

I will post the result after testing your method on my A78. Lets hope for something good

Bro!! You are the best.. Thanks a lot!!!

abs_dear said:
Bro!! You are the best.. Thanks a lot!!!
Click to expand...
Click to collapse
That's good to know! Any problems anybody faces,m always there
Sent from my Micromax A110 using xda app-developers app

WOOT WOOT
vshlkmr buddy you are the BEST :good:
i tried with SOC bt didnt wrk..n i ws worried to play with SP flash tool coz i dnt hv any alternt phone...excellent job man...
will root my phone ASAP n let u know if i get any problms..
it'll be perfect if you can provide CWM recovery...
THANKS again..

Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param

paramjeetgem said:
Hi,
Facing a strange issue and that too at very first step. When I am connecting the phone (Switched Off) to USB Cable after Driver Installation, Windows detects the device and tries to install MT65xx PreLoader. But after a few seconds, it shows the error: Device Unplugged.
Can you plz help to resolve this ?
Thanks,
Param
Click to expand...
Click to collapse
Ok, I am able to resolve this by Disabling Searching Windows Update for Device Drivers.
And, YES, I have rooted my A78
Big Big Thanks to vshlkmr

Phone Finally from rotted to Rooted
Thanks Buddy...
Phone is finally of some use now.
vshlkmr said:
I'll also make a custom recovery if you are interested
Click to expand...
Click to collapse
Yes, we are very interested. please make a custom recovery for a78.
Thanks

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)

I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:

I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.

when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....

could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400

RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again

najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread

bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx

RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored

can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks

simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.

Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space

AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app

Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app

Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app

New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...

najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one

root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?

bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software

atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

Xolo Q 2000 development hacking root stock and custom roms

HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools
HOW TO FLASH CMW RECOVERY
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 download link https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...

reserved
xolo q2000

reserved 2
xolo q2000

A step-by-step guide would be very helpful.
Thanks.
Major

i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium

salil.bajaj said:
i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files

nileshtambe said:
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files
Click to expand...
Click to collapse
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?

salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
To enter recovery....
Press Vol+ & Power Buttons...
Keep them pressed till you enter recovery screen...
like mentioned above Vol+ key is enter key while in recovery mode.
Major.
---------- Post added at 03:50 PM ---------- Previous post was at 03:44 PM ----------
nileshtambe said:
HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools download link for cmw recovery http://ge.tt/6OY1CJ01/v/5?c
cmw twrp recovery by wong yuweng download link http://ge.tt/6OY1CJ01/v/01?c
who wanna try TWRP 2.6.3.0 however you might brick it...
Refer to this mod, must follow or you will loose you IMEI...
http://www.mediafire.com/view/?7humxw5eb99404u
if secro.img report oversize then use this one here...
http://d-h.st/oGZ
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 downloa link will up ...
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...
Click to expand...
Click to collapse
Its showing ADB Interface not Composite device...help required
How to install drivers????
---------- Post added at 04:04 PM ---------- Previous post was at 03:50 PM ----------
Never mind problem solved....
Windows 7 installs drivers automatically
No need to install them seperately.
Just keep in mind though...run the contents of root Xolo q2000 from root of any drive (i.e not from any folder)
This should do the trick...
Enjoy !!!
Thanks Nilesh...

salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
hard reset done many times otg is not working in my case
yes i got scratch guard with phone but not put on phone immediately when i given phone box for billing that person removed it from box
i came to know when i opened box at home but person who sold me in shop is good friend of mine he said he will give me another one .
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
use this scatter file http://ge.tt/374Dzm01 and recovery file ctr.7z http://ge.tt/6OY1CJ01/v/01?c

what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium

salil.bajaj said:
what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
don't know its created by mtk droid tool while taking phone backup of stock rom

majorraj2003 said:
A step-by-step guide would be very helpful.
Thanks.
Major
Click to expand...
Click to collapse
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
note
twrp is not flashing and recovery by wong is not working so i am removing from 1st post .

Please help me
Hi Guys,
Could you please help me where I can get this device in Hyderabad? Is it available in white? IS it a best buy phone or shall I go for Gionee E6 or E3. Please all help me.

will you please provide the stock rom of this device?

can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium

salil.bajaj said:
can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
http://ge.tt/7AFaVV61/v/0?c

A big problem
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?

salil.bajaj said:
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?
Click to expand...
Click to collapse
i will give you system img to flash with sp tool let me upload it

nileshtambe said:
i will give you system img to flash with sp tool let me upload it
Click to expand...
Click to collapse
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you

salil.bajaj said:
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you
Click to expand...
Click to collapse
select scatter file and flash only system that will do the job
https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing

I got the sky devices my model is 5.0q I finally find the root

Towelroot:fail
Framaroot:fail
Poot:fail
vroot:works 100%
Other root methods won't work
I rooted with http://www.mgyun.com/en/getvroot
Now I need to build cwm or twrp for this device
Added notes:
http://pc.cd/pWj7 build.prop
http://pc.cd/XRu7 this is the device tree
I'm work hard as to get cwm but right now isn't no stock ROM for this device only root if anybody want to help out let me know

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is rooted and viper4droid won't work
Sent from my Sky 5.0Q using Tapatalk

Anybody tried this?

Krystyna said:
Anybody tried this?
Click to expand...
Click to collapse
trust me it works i find the root yesterday afternoon when i traded my broken nexus 5 to the sky but i cant find no recovery

lox2013 said:
I'm work hard as to get cwm but right now isn't no stock ROM for this device only root if anybody want to help out let me know
Click to expand...
Click to collapse
You can create your own CWM my friend.
1. You have to use MTK Droid Tools to get the Block Map for the phone. Download and install MTK Droid Tools. Turn your phone on and make sure the USB Debugging is on. Now connect the phone to your computer via a USB cable. MTK Droid will recognize the phone. Now, just click the Blocks Map button and click the Save button to save the scatter.txt file in a directory you make. You will need the scatter.txt file in the next step. This step only works for a rooted phone. Your phone is rooted so you can do this. (For those who don't have root access, there is a button on the bottom of the MTK Droid window to temporarily root the phone...but it may not work). DISCONNECT YOUR PHONE FROM THE COMPUTER. And turn your phone OFF.
2. Next you must use SP Flash Tool to make a backup of the complete ROM. SPF will ask you to select the scatter.txt file. Once you select it, select the Read Back tab. Click on the Add button. It will create a record to indicate what you want to back up. Click on the file name and you then select the folder where you want to place the ROM (it is automatically named ROM_0). Then it will ask you for the starting address and the length. The starting address is 0x0. To determine the length of the backup, you have to read the scatter.txt file. Look at the "linear starting address" of the Cache partition. That is the number you want to use for the length. You write it like this "0xnnnnnnnn". Then click enter. So now the SPF knows what you want to backup from the phone and where it will store the backup.
3. Next, click the Read Back button. The SPF is now waiting for you. There's no need to rush. Turn your phone off (if you haven't turned it off yet). REMOVE the battery from your phone. Connect the USB cable from the computer to the phone then put the battery back in the phone. Do NOT turn the phone on. The SPF will then backup your ROM. This step could take almost an hour to finish. Go make yourself a nice cup of coffee.
4. When the backup is done, you will see a big green OK dialog. You can now disconnect the phone. Your backup is saved as ROM_0 in the folder you selected. Now go back to MTK Droid Tools. Turn your phone back on. Make sure USB Debugging is still on. Connect the phone to the USB cable again. Once MTK Droid Tool recognizes the phone, go to the Root, Recovery tab. Click the button that says "Process ROM from the file." It will ask you to select the ROM_0 file you just backed up. This process will turn your ROM_0 into the partition files that make up your firmware. During this process, it will ask you if you want to make the CWM recovery!
Let the whole process complete. It could take a half hour or more. When it is done. The firmware and the CWM image will be in the MTK Droid folders. Just look through the folders under MTK Droid on your hard disk drive.
Please, when you are done, share the scatter.txt file and the CWM recovery.img with us.
And don't forget to click the Thank You button if this helped you in any way.
Sent from my Nexus 7 using XDA Free mobile app

Thanks for sharing this. Is the CWM recovery installed on the device at this point, or does it still need to be installed?

jmullan99 said:
Thanks for sharing this. Is the CWM recovery installed on the device at this point, or does it still need to be installed?
Click to expand...
Click to collapse
No. At this point, the CWM recovery image has been created in one of the folders on the computer. You next have to install it on the phone via SP Flash Tool.
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
No. At this point, the CWM recovery image has been created in one of the folders on the computer. You next have to install it on the phone via SP Flash Tool.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
I will be doing this today and will share the files when done!

HackYouDaily said:
I will be doing this today and will share the files when done!
Click to expand...
Click to collapse
There may be a problem. I tried to use a SKY 4.0D with MTK Droid Tools. For some reason, it doesn't work. I think there's an issue with the kernel. This means that someone needs to port this phone's recovery to CWM or TWRP. Hopefully, someone has already done this...but the community/developer support for these devices is non-existent unfortunately.
Once the custom recovery is available, you have to flash it onto the device, either with SP Flash Tool (you just need the scatter.txt file which you xan get from MTK Droid), or you can root your phone, install Busybox, and install Flashify to flash it to the phone.
IDEA: Start a separate XDA thread for SKY devices. They are cheap but beautiful devices. Maybe some technical folks who are skilled in porting recoveries may show up just for the challenge.
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
There may be a problem. I tried to use a SKY 4.0D with MTK Droid Tools. For some reason, it doesn't work. I think there's an issue with the kernel. This means that someone needs to port this phone's recovery to CWM or TWRP. Hopefully, someone has already done this...but the community/developer support for these devices is non-existent unfortunately.
Once the custom recovery is available, you have to flash it onto the device, either with SP Flash Tool (you just need the scatter.txt file which you xan get from MTK Droid), or you can root your phone, install Busybox, and install Flashify to flash it to the phone.
IDEA: Start a separate XDA thread for SKY devices. They are cheap but beautiful devices. Maybe some technical folks who are skilled in porting recoveries may show up just for the challenge.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Okay thanks for the heads up. I'm using my Sky 5.0 Q I'll be trying a few methods out, I just joined the xda community today. Mainly just to help on this thread lol :fingers-crossed:
---------- Post added at 09:51 PM ---------- Previous post was at 09:22 PM ----------
YES!! it worked!!

HackYouDaily said:
Okay thanks for the heads up. I'm using my Sky 5.0 Q I'll be trying a few methods out, I just joined the xda community today. Mainly just to help on this thread lol :fingers-crossed:
---------- Post added at 09:51 PM ---------- Previous post was at 09:22 PM ----------
YES!! it worked!!
Click to expand...
Click to collapse
Congrats! Now, what exactly was it that worked? Please elaborate for the rest of us.
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
Congrats! Now, what exactly was it that worked? Please elaborate for the rest of us.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
I was able to make a CWM recovery.img for my Sky 5.0 Q I'm working on porting cyanogenmod now

HackYouDaily said:
I was able to make a CWM recovery.img for my Sky 5.0 Q I'm working on porting cyanogenmod now
Click to expand...
Click to collapse
I got that...but was curious how you did it. Did MTK Droid Tools work for you? Or was it some other method?
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
I got that...but was curious how you did it. Did MTK Droid Tools work for you? Or was it some other method?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for my non helpful reply was really busy yesterday coding. I used MTK droid tools it didn't work the first time, I backed up my device again made the CWM recovery for the second time and it than booted into CWM perfectly. If you're having issues than it may be because of root I had used a one click program but it never fully rooted my device I had issues until I fully rooted on mtk droid tools ?
Sent from my Sky 5.0Q using XDA-Developers mobile app

HackYouDaily said:
Sorry for my non helpful reply was really busy yesterday coding. I used MTK droid tools it didn't work the first time, I backed up my device again made the CWM recovery for the second time and it than booted into CWM perfectly. If you're having issues than it may be because of root I had used a one click program but it never fully rooted my device I had issues until I fully rooted on mtk droid tools ?
Sent from my Sky 5.0Q using XDA-Developers mobile app
Click to expand...
Click to collapse
BTW, you should share your CWM image on say Mega.nz and post up the link so others less skilled can download and flash it. It really helps, and you'll be thanked profusely.
Also, please consider sharing what rooting program or method you used to properly root your phone. My preferred method for properly rooting MTK devices is to first flash a custom recovery using SPFT, then install SuperSu zip from the SD card. This way, I'm not having to deal with or replace Chinese super user programs.
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
BTW, you should share your CWM image on say Mega.nz and post up the link so others less skilled can download and flash it. It really helps, and you'll be thanked profusely.
Also, please consider sharing what rooting program or method you used to properly root your phone. My preferred method for properly rooting MTK devices is to first flash a custom recovery using SPFT, then install SuperSu zip from the SD card. This way, I'm not having to deal with or replace Chinese super user programs.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
STEP 1. Download MTK droid tools. I rooted the SKY 5.0Q with Kingo root I than used MTK droid tools to fully root the device by clicking the root button. STEP 2. Back up the phone using droid tools, its going to ask you if you want CWM built into the recovery make sure to click yes. During the process it will ask if you want to flash the new recovery image, go ahead and click yes. STEP 3. Your phone should now be rebooting into CMW now, go through it to make sure it works correctly. If it doesnt then re flash the NEW recovery boot.img that you just made.
*PLEASE NOTE: SuperUser is automatically put onto the device when rooting with Kingo root.*
CWM recovery.img - http://tinyurl.com/jzcoazo Scatter.txt if needed - tinyurl.com/hrjkep3

For the stock rom u can visit tekof2marrow to download it.

CVAngelo said:
You can create your own CWM my friend.
1. You have to use MTK Droid Tools to get the Block Map for the phone. Download and install MTK Droid Tools. Turn your phone on and make sure the USB Debugging is on. Now connect the phone to your computer via a USB cable. MTK Droid will recognize the phone. Now, just click the Blocks Map button and click the Save button to save the scatter.txt file in a directory you make. You will need the scatter.txt file in the next step. This step only works for a rooted phone. Your phone is rooted so you can do this. (For those who don't have root access, there is a button on the bottom of the MTK Droid window to temporarily root the phone...but it may not work). DISCONNECT YOUR PHONE FROM THE COMPUTER. And turn your phone OFF.
2. Next you must use SP Flash Tool to make a backup of the complete ROM. SPF will ask you to select the scatter.txt file. Once you select it, select the Read Back tab. Click on the Add button. It will create a record to indicate what you want to back up. Click on the file name and you then select the folder where you want to place the ROM (it is automatically named ROM_0). Then it will ask you for the starting address and the length. The starting address is 0x0. To determine the length of the backup, you have to read the scatter.txt file. Look at the "linear starting address" of the Cache partition. That is the number you want to use for the length. You write it like this "0xnnnnnnnn". Then click enter. So now the SPF knows what you want to backup from the phone and where it will store the backup.
3. Next, click the Read Back button. The SPF is now waiting for you. There's no need to rush. Turn your phone off (if you haven't turned it off yet). REMOVE the battery from your phone. Connect the USB cable from the computer to the phone then put the battery back in the phone. Do NOT turn the phone on. The SPF will then backup your ROM. This step could take almost an hour to finish. Go make yourself a nice cup of coffee.
4. When the backup is done, you will see a big green OK dialog. You can now disconnect the phone. Your backup is saved as ROM_0 in the folder you selected. Now go back to MTK Droid Tools. Turn your phone back on. Make sure USB Debugging is still on. Connect the phone to the USB cable again. Once MTK Droid Tool recognizes the phone, go to the Root, Recovery tab. Click the button that says "Process ROM from the file." It will ask you to select the ROM_0 file you just backed up. This process will turn your ROM_0 into the partition files that make up your firmware. During this process, it will ask you if you want to make the CWM recovery!
Let the whole process complete. It could take a half hour or more. When it is done. The firmware and the CWM image will be in the MTK Droid folders. Just look through the folders under MTK Droid on your hard disk drive.
Please, when you are done, share the scatter.txt file and the CWM recovery.img with us.
And don't forget to click the Thank You button if this helped you in any way.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Hello I have a SKY Elite 5.0l and MTDroid wont detect the phone at all, I have install all the drivers and still it wont connect

Django64 said:
Hello I have a SKY Elite 5.0l and MTDroid wont detect the phone at all, I have install all the drivers and still it wont connect
Click to expand...
Click to collapse
Did you turn on the USB Debugging? When you connect your phone (with Debugging on) you will need to respond to the dialog that pops up on your phone to allow the computer to have access! If you do not turn on debugging or is you do not respond to this dialog, MTK Droid will not be able to see your phone.
Sent from my Nexus 7 using XDA Free mobile app

CVAngelo said:
Did you turn on the USB Debugging? When you connect your phone (with Debugging on) you will need to respond to the dialog that pops up on your phone to allow the computer to have access! If you do not turn on debugging or is you do not respond to this dialog, MTK Droid will not be able to see your phone.
Click to expand...
Click to collapse
Yes I did I did everything, I even tried it on windows 7 and 10 (pc and laptop)
and I still get the same results, I even deleted all MT drivers with usbdeview and reinstall, same thing
UPDATE:
Ok I got MTK Droid tool to detect the phone but I was unable to extract the scatter file, after numerous attempts I was informed that the Latest MTK DROID TOOL will not work 100% with the MT67xx chipset devices, maybe in the next update.