CWM recovery v6.0.3.0 for canvas 4 - Miscellaneous Android Development

Here is cwm recovery for Canvas 4 it is v6.0.3.0.
I am not resposible if your phone catches on fire or gets bricked!
Use via SP tools or MobileUncle...Flashing via fastboot wont work since size is too large.. the same error will come in sp tools, just ignore it and continue installation.
For SP tools,
click scatter file and direct it to the given scatter file
2) unselect everything other than recovery
3) double click on recovery and direct it to the recovery download in the post
4) click download on the top ignore all warnings and connect your phone(it should be switched off).
5) wait for green ring to appear
6)hold the power and the 2 volume buttons(when switched off) to check if the recovery got flashed properly or not
For mobileUncle:
1)Transfer the recovery.img to root of your sd card
2)The, click on mobileuncle tools and grant it root permissions
3)Click on recovery update and click the img, click flash recovery and select ok.
4)click yes on reboot to recovery option @robinsahlot i need help bro
If any problem please PM me, Thank me if it worked!

MasterAwesome said:
Here is cwm recovery for Canvas 4 it is v6.0.3.0.
I am not resposible if your phone catches on fire or gets bricked!
Use via SP tools or MobileUncle...Flashing via fastboot wont work since size is too large.. the same error will come in sp tools, just ignore it and continue installation.
For SP tools,
click scatter file and direct it to the given scatter file
2) unselect everything other than recovery
3) double click on recovery and direct it to the recovery download in the post
4) click download on the top ignore all warnings and connect your phone(it should be switched off).
5) wait for green ring to appear
6)hold the power and the 2 volume buttons(when switched off) to check if the recovery got flashed properly or not
For mobileUncle:
1)Transfer the recovery.img to root of your sd card
2)The, click on mobileuncle tools and grant it root permissions
3)Click on recovery update and click the img, click flash recovery and select ok.
4)click yes on reboot to recovery option @robinsahlot i need help bro
If any problem please PM me, Thank me if it worked!
Click to expand...
Click to collapse
yes my friend
how may i help u

It says it can't open /tmp/recovery . log....
Sent from my A210 using XDA Premium 4 mobile app

It says can't open recovery.log
Sent from my A210 using XDA Premium 4 mobile app

MasterAwesome said:
It says can't open recovery.log
Sent from my A210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
give me sometime i wil check it out
---------- Post added at 11:02 AM ---------- Previous post was at 10:55 AM ----------
hey bro
Just creat a /tmp folder on your sdcard and try it again
hope it works

./

robinsahlot said:
give me sometime i wil check it out
---------- Post added at 11:02 AM ---------- Previous post was at 10:55 AM ----------
hey bro
Just creat a /tmp folder on your sdcard and try it again
hope it works
Click to expand...
Click to collapse
Doesnt work, i tried

MasterAwesome said:
Doesnt work, i tried
Click to expand...
Click to collapse
i have ported 6.0.2.8 recovery to CANVAS 4 WORKING FULLY
SHANE

Shane said:
i have ported 6.0.2.8 recovery to CANVAS 4 WORKING FULLY
SHANE
Click to expand...
Click to collapse
Dude, can you try and diagnose the problem in mine, why it's saying can't open tmp/recovery.log?
Sent from my A210 using XDA Premium 4 mobile app

And, what's the link for your port?
Sent from my A210 using XDA Premium 4 mobile app

Related

Micromax A52 ROOTED!!!!

So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Great work bro. If you have given this before 1 day. I may not flash my A52 with Russian Rom of Fly mobile...
...
Please upload the full backup rom of A52 after rooting Complete Anybody...
I have lost my A52 backup.
Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app
vshlkmr said:
So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
Good work u kickd the micromax:thumbup:
sent from my rooted a52
vshlkmr said:
Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
Yes My A52 working. But it is all now Fly Like view. All boot logos are of fly. Yes it is rooted but I want the original rooted stock ROM of MMX A52. If you can help it will be great.
Pls post full rom some people unable to switch 3g to 2g or 2g to 3g
Thanks
sent from my rooted a52
Now we try for a up-gradation to ICS.
helloansuman said:
Now we try for a up-gradation to ICS.
Click to expand...
Click to collapse
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52
For all of you who need The stock rom check out The a52 indiedevers group page on fb...
Then flash The stock rom and then flash my boot.img..you will get everything Micromax + root..
Sent from my Karbonn_A18 using xda app-developers app
piracyhater said:
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52
Click to expand...
Click to collapse
A52's ram and screen is really low to meet ics requirements..
Sent from my Karbonn_A18 using xda app-developers app
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Finally I too got it rooted, used only bootimg option for spflash tool. and refer to op attached img file. it works...!!!!!
method works.. I recd brom error after flashing but on using unlockroot it worked
so ignore the error if u like to risk.
kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
:good:
kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
Select The bootimg option, then click on The option and select The path of my modified boot.img file, then connect your phone and flash it!!!
& Yeah if you want you can again un root your device by just pressing The un root button on The unlockroot programme you rooted with!! No need of flasing The original boot.img!
Sent from my Karbonn_A18 using xda app-developers app
Nothing happen when i click to download ADB drivers
kartikoli said:
Nothing happen when i click to download ADB drivers
Click to expand...
Click to collapse
Then download and install super-one-click root, it'll do everything for you..
Link->
http://forum.xda-developers.com/showthread.php?t=803682
Sent from my Karbonn_A18 using xda app-developers app
i have already tried it but the problem is with the drivers as it cant find the device
---------- Post added at 06:49 AM ---------- Previous post was at 05:55 AM ----------
rooted the device ... thanks for every thing
when i run new version of super1click then it asked me to install drivers and then later used unlockroot to root the device
now customizing and freeing the phone with Root Uninstaller Pro
Bro if you dont mind then can you post this root on androidforums so that users can get max search results
---------- Post added at 07:33 AM ---------- Previous post was at 06:49 AM ----------
Help plzzzz i have freezed few apps using uninstaller pro and now my phone doesnt boots to desktop. i can see the boot anomation but it get stuck on that screen
please help me
I root my phone following process it stuck on 99% and when I boot it shows only welcome screen im on and off and on many time my phone on since last night but no progress pls help is my phone going to die pls help no body answer me pls help me developers
Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd
helloansuman said:
Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd
Click to expand...
Click to collapse
You wanna backup The mtd partitions eh? Well download terminal emulator from play store u can use these commands in that
Sent from my Karbonn_A18 using xda app-developers app
[email protected] bro any plan to release first ROM for this phone

Nothing. delete this.

removed.
318 views and 6 thanx.
go here
Just one question... its for micromax A88... right?
Sent from my Micromax A88 using xda app-developers app
sumgag said:
Just one question... its for micromax A88... right?
Sent from my Micromax A88 using xda app-developers app
Click to expand...
Click to collapse
yes canvas music A88. tested and working. press thanx please.
It worked like charm... thanks bro
Also, can we use speedy droid scrpt for bloatware removal or what is the preffered option???
sumgag said:
It worked like charm... thanks bro
Also, can we use speedy droid scrpt for bloatware removal or what is the preffered option???
Click to expand...
Click to collapse
i removed using titanium backup (i knew which one i've to remove)
can post here list to if you want to.
looking what speedy droid script is.
Check Xperia P section for speedy droid script. I was using sony mobiles earlier...
I used ROM toolbox lite from Jrumm y... Kinda worked however lost will be helpful...
Thanks
Sent from my Micromax A88 using xda app-developers app
help...
Sudeep Duhoon said:
The whole process is working and much similar to canvas 2 on jelly bean. i did all this by myself (by searching internet and porting etc) and i've tried this on my own phone. working.
Downloads:
Drivers
Flash Tool
CWM Recovery for canvas music
TWRP Recovery 2.5 for canvas music
Stock Recovery
UPDATE-SuperSU-v1.04
MT6577_Android_scatter_emmc.txt
Optional: Stock SP Flashable Rom
Procedure:
1. Download everything except the rom (optional)
2. Install drivers and place CWM Recovery and MT6577_Android_scatter_emmc.txt inC: drive. and UPDATE-SuperSU-v1.04.zip in your phone's sd card.
3. Extract and run SP Flasher Options-DA Downlad All-Speed-Force to high speed, check this (enable)
4. Click "scatter-loading' and select MT6577_Android_scatter_emmc.txt from C: drive.
5. Uncheck all options (if checked), click on recovery and chose CWM Recovery.img from C: drive.
6. Click Download, OK on warrning. SP Flasher will search for phone.
7. Now u have to connect your phone to pc when it is powering off. For ease, Connect your phone in charging mode to pc and then power it off.
8. Wait, SP Flasher will recognize your canvas music and will start flashing.
9. A green circle will indicate that the flashing has completed.
10. Disconnect your phone and press Volume Up+ Volume Down+Power on. select recovery to go to CWM Recovery. Or press Volume Up+Power on and select Recovery.
11. Once in CWM Recovery, make a backup. (Optional, Highly recommended)
12. Flash UPDATE-SuperSU-v1.04.zip
13. Reboot.
OR
Replace CWM Recovery with TWRP Recovery if you want TWRP Recovery. Both are tested and working.
Press Thanx. please.
Click to expand...
Click to collapse
I am trying to follow ur guide i am able to get to the step where we have to connect the phone and switch off but my phone is not recognised and the tool stays searching for phone. anything i am doing wrong here
You need to have the VIA COM USB drivers installed for the computer to recognise the preloader...
I guess he forgot to add that step...
dextrorotatrix said:
You need to have the VIA COM USB drivers installed for the computer to recognise the preloader...
I guess he forgot to add that step...
Click to expand...
Click to collapse
i didn't installed any peloader drivers (window installed it from internet by itself).
you can google drivers easily.
Sudeep Duhoon said:
The whole process is working and much similar to canvas 2 on jelly bean. i did all this by myself (by searching internet and porting etc) and i've tried this on my own phone. working.
Downloads:
Drivers
Flash Tool
CWM Recovery for canvas music
TWRP Recovery 2.5 for canvas music
Stock Recovery
UPDATE-SuperSU-v1.04
MT6577_Android_scatter_emmc.txt
Optional: Stock SP Flashable Rom
Procedure:
1. Download everything except the rom (optional)
2. Install drivers and place CWM Recovery and MT6577_Android_scatter_emmc.txt inC: drive. and UPDATE-SuperSU-v1.04.zip in your phone's sd card.
3. Extract and run SP Flasher Options-DA Downlad All-Speed-Force to high speed, check this (enable)
4. Click "scatter-loading' and select MT6577_Android_scatter_emmc.txt from C: drive.
5. Uncheck all options (if checked), click on recovery and chose CWM Recovery.img from C: drive.
6. Click Download, OK on warrning. SP Flasher will search for phone.
7. Now u have to connect your phone to pc when it is powering off. For ease, Connect your phone in charging mode to pc and then power it off.
8. Wait, SP Flasher will recognize your canvas music and will start flashing.
9. A green circle will indicate that the flashing has completed.
10. Disconnect your phone and press Volume Up+ Volume Down+Power on. select recovery to go to CWM Recovery. Or press Volume Up+Power on and select Recovery.
11. Once in CWM Recovery, make a backup. (Optional, Highly recommended)
12. Flash UPDATE-SuperSU-v1.04.zip
13. Reboot.
OR
Replace CWM Recovery with TWRP Recovery if you want TWRP Recovery. Both are tested and working.
Press Thanx. please.
Click to expand...
Click to collapse
Can we insall Canvas 2 a110 Roms on canvas music ?
As both have same resolution i.e. 480*845 !!
kaml said:
Can we insall Canvas 2 a110 Roms on canvas music ?
As both have same resolution i.e. 480*845 !!
Click to expand...
Click to collapse
yes u can with a little porting.
go here
All devs please go here.
It is a project started by me to get android 4.2.x in our canvas music.
http://forum.xda-developers.com/showthread.php?t=2457432
Sent from my A88 using Tapatalk 2

Celkon a119 hd custom rom[jellybean}

AFTER INSTALLING TWRP RECOVERY FROM THE BELOW STEPS OR IF INSTALLED CWM FROM MY EARLIER POST THEN FIRST TAKE AN BACKUP SO THAT YOU CAN RESTORE IF ANY ERROR HAPPENS BECAUSE I DONT HAVE THE ORIGINAL COPY OF THE OS..
AND IF YOU HAVE INSTALLED CWM FROM MY ROOTING METHOD THEN SKIP ALL THE BELOW STEPS AND DIRECTLY DOWNLOAD THE ROM AND INSTALL IT BY PLACING IT IN SD CARD AND FLASHING IT
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/...l_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/show....php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on a119 hd not Q hd
screenshots please
Can you post screenshots plz?
sure...
can we apply this rooting method and ROM for the quadcore(a119q) version too?
Yes give a try...it may work...and report back...
There is good for 119q version version which is quite easy
Sent from my Celkon A119Q using Tapatalk 4 Beta
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Coz quad core uses different chipset
Sent from my Celkon A119Q using Tapatalk 4 Beta
Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!
techpick said:
Hello People! Anyone out there who can help me out with a custom ROM for HD 119Q. Please help!
Click to expand...
Click to collapse
Please follow this thread for your device custom ROM.
http://forum.xda-developers.com/showthread.php?t=2374660
Press thanks button if it's helpful.
Sent from my Nexus 7 using Tapatalk 4
Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!
techpick said:
Guys, I rooted my Celkon signature HD A119Q, but facing issues with the Recovery. I am not able to load recovery on to my phone. Pleas help!
Click to expand...
Click to collapse
What happened? Are you having issues with flashing CWM recovery?
Sent from my Nexus 7 using Tapatalk 4
Yes. Basically got it rooted. Then I had issues with flashing recovery and in a hurry I think I screwed it up by installing a wrong recovery using mobile uncle. Now neither can I hard reset my phone not can I go to recovery. If I try doing hard reset, it does all the process but once the phone switches on, it comes back to the situation where in I started with resetting. I know it was stupid of me to screw up the recovery, but please help dude.
Sent from my Celkon A119Q using xda app-developers app
Issue Sorted!

Xolo Q 2000 development hacking root stock and custom roms

HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools
HOW TO FLASH CMW RECOVERY
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 download link https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...
reserved
xolo q2000
reserved 2
xolo q2000
A step-by-step guide would be very helpful.
Thanks.
Major
i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium
salil.bajaj said:
i too bought the phone yesterday.Do u find touch to be more on the harder side or is it fine?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files
nileshtambe said:
its on harder side and and if phone is flat laying on flat bed or cloth it doesn't respond nicely .
otg function is not working .
screen drains battery a lot more than 57% battery is eaten by display
.
in recovery mode touch buttons of no use vol + is enter button and vol - is for scrolling .
i was able to install application on/to sd card as i am rooted but when i integrate updated application in system then system/app/ folder keeps both files updated and old one so i have to manually delete those old files
Click to expand...
Click to collapse
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
To enter recovery....
Press Vol+ & Power Buttons...
Keep them pressed till you enter recovery screen...
like mentioned above Vol+ key is enter key while in recovery mode.
Major.
---------- Post added at 03:50 PM ---------- Previous post was at 03:44 PM ----------
nileshtambe said:
HI today i purchsed xolo q2000
rooted by this tool http://ge.tt/6OY1CJ01/v/9?c drivers http://ge.tt/6OY1CJ01/v/2?c
HOW TO ROOT GUIDE
Here follow the steps.
1.Download the attachment containing the rooting tool and drivers
2. make sure usb debugging is enabled setting >developer option > usb debugging enable it
3.After driver is installed,check whether you have ADB composite device showing up in PC's device manager.
4.After making sure everything is alright, open the .bat file contained in the zip folder, follow the instructions .
cmw with MtkDroidTools download link for cmw recovery http://ge.tt/6OY1CJ01/v/5?c
cmw twrp recovery by wong yuweng download link http://ge.tt/6OY1CJ01/v/01?c
who wanna try TWRP 2.6.3.0 however you might brick it...
Refer to this mod, must follow or you will loose you IMEI...
http://www.mediafire.com/view/?7humxw5eb99404u
if secro.img report oversize then use this one here...
http://d-h.st/oGZ
install application to directly to external sd card by MoreApp http://ge.tt/6OY1CJ01/v/6?c
stock rom prepared by MtkDroidTools_v248 downloa link will up ...
to flash stock rom sp tool download link http://ge.tt/6OY1CJ01/v/0?c drivers http://ge.tt/6OY1CJ01/v/1?c
All thanks to original developers of respected softwares...
Click to expand...
Click to collapse
Its showing ADB Interface not Composite device...help required
How to install drivers????
---------- Post added at 04:04 PM ---------- Previous post was at 03:50 PM ----------
Never mind problem solved....
Windows 7 installs drivers automatically
No need to install them seperately.
Just keep in mind though...run the contents of root Xolo q2000 from root of any drive (i.e not from any folder)
This should do the trick...
Enjoy !!!
Thanks Nilesh...
salil.bajaj said:
Thanks for the info mate.
The OTG is working in my case.
And did you get a scratch guard with your phone?
Also please tell me how to get into recovery mode and how to proceed with installing cwm?
Click to expand...
Click to collapse
hard reset done many times otg is not working in my case
yes i got scratch guard with phone but not put on phone immediately when i given phone box for billing that person removed it from box
i came to know when i opened box at home but person who sold me in shop is good friend of mine he said he will give me another one .
for installing cmw two ways
1- download and install mobile uncle tool from play store
place recovery file in root of your sd card internal or external that doesn't matter
open mobile uncle tool and select option for update recovery > reboot .
2. flash only recovery image by sp flash tool
use this scatter file http://ge.tt/374Dzm01 and recovery file ctr.7z http://ge.tt/6OY1CJ01/v/01?c
what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium
salil.bajaj said:
what is the boot patched file in the given list? I mean,what does it do?
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
don't know its created by mtk droid tool while taking phone backup of stock rom
majorraj2003 said:
A step-by-step guide would be very helpful.
Thanks.
Major
Click to expand...
Click to collapse
here is video tutorial https://www.youtube.com/watch?v=bsixDGBrqNc
files required sp flash tool http://ge.tt/6OY1CJ01/v/0?c
recovery file and scatter file http://ge.tt/9UVcEi11/v/0?c
tested and confirmed working by me only thing is its upside down lol will make it proper afterwards by help from wong
note
twrp is not flashing and recovery by wong is not working so i am removing from 1st post .
Please help me
Hi Guys,
Could you please help me where I can get this device in Hyderabad? Is it available in white? IS it a best buy phone or shall I go for Gionee E6 or E3. Please all help me.
will you please provide the stock rom of this device?
can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium
salil.bajaj said:
can anyone provide me with the latest update.zip(5.04 mb) file??
Sent from my Q2000 using xda premium
Click to expand...
Click to collapse
http://ge.tt/7AFaVV61/v/0?c
A big problem
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?
salil.bajaj said:
I changed the screen density for 320 to 240 and now the phone is not booting up!
Any idea what to do?
Click to expand...
Click to collapse
i will give you system img to flash with sp tool let me upload it
nileshtambe said:
i will give you system img to flash with sp tool let me upload it
Click to expand...
Click to collapse
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you
salil.bajaj said:
Thank you bro!
You saved my as*!!!!
---------- Post added at 08:15 PM ---------- Previous post was at 07:45 PM ----------
If possible please upload it today itself.Just a lil request.
Thank you
Click to expand...
Click to collapse
select scatter file and flash only system that will do the job
https://drive.google.com/file/d/0Bz1n7oQDpzEGRk82RVdYb0RBZFU/edit?usp=sharing

Micromax Canvas Gold A300

This is the first ever thread dedicated to Micromax Canvas Gold A300.
Micromax Canvas Gold A300 Unbrick CWM Custom Recovery Root
Micromax Canvas Gold A300 Stock Rom V1
CWM Recovery
Windows 7/8 32 Bit and 64 Bit Driver
Rooting Method
Read everything or risk a brick. Standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. Always take backup of everything e.g. Nvram folder using various tools like recovery, titanium backup, root browser etc. Don’t do it if you don’t know what is rooting and custom rom / firmware.
Hey Friends…
1. Stock Rom V1: http://www.needrom.com/mobile/micromax-a300/ Need to Register on NeedRom (Thanks to them)
2. Drivers (Windows 32 Bit):http://www.mediafire.com/download/hl0jj1f74lazoc7/Mobistel_Cynus_T1_Drivers_x86.exe or http://www.medIafIre.com/download/nv96xclhjmaiclu/Mobistel_Cynus_T1_Drivers_x86.exe
3: Drivers (Windows 64 Bit):http://explay.ru/download/firmware/mobile/dream/Win8 SmartPhoneDriver.rar
4. SP Tool:http://www.mediafire.com/download/8bauf98i2dri2jj/SP_Flash_Tool_exe_v3.1312.0.139.zip
5. Steps for flashing stock ROM via SP Tool:
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar downloaded ROM in RAR File Format and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder M-A300-LWDEB16.2.10.1.0T22A0512_M552 and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder M-A300-LWDEB16.2.10.1.0T22A0512_M552.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.
6. CWM Recovery Link: http://www.mediafire.com/download/wa99z97yvs012v3/recovery.img
7. Flashing Method of CWM via SP tool.
Steps:
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar downloaded ROM in RAR File Format and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder M-A300-LWDEB16.2.10.1.0T22A0512_M552 and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder M-A300-LWDEB16.2.10.1.0T22A0512_M552.
i) Wait file to be added into Flash Tool. Now uncheck all options except Recovery. Click on Recovery and select CWM / TWRP Recovery Provided in Link.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.
8. Rooting Method: (Thank You My dear Friend govind.madhu93)
After you install CWM recovery... Go to recovery and install the zip which u can download from the link below.
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip?retrieve_file=1
Please Press Thanks if I helped.
Micromax Canvas A300 Gold
Reserved 1
Micromax Canvas A300 Gold
Reserved 2
Micromax Canvas A300 Gold
Reserved 3
Micromax Canvas A300 Gold
Reserved 4
Micromax Canvas A300 Gold
Reserved 5
MIUI ROM
Can you try to port MIUI for this device?
MIUI PORT
If anyone wants to try to port MIUI to this device.. Please follow this link
http://en.miui.com/thread-20482-1-1.html
ROOT
After you install CWM recovery... Go to recovery and install the zip which u can download from the link below..
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip?retrieve_file=1
This is the safest method. Virus free.
Better not to try any other apps like Kingo root. Towelroot. Baidu etc...
Thank You dear
govind.madhu93 said:
After you install CWM recovery... Go to recovery and install the zip which u can download from the link below..
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip?retrieve_file=1
This is the safest method. Virus free.
Better not to try any other apps like Kingo root. Towelroot. Baidu etc...
Click to expand...
Click to collapse
Thank You dear. Added in First Post.
TWRP
TWRP recovery. I found it on needroms website.
Thank you SevenMaxs!
http://www.needrom.com/mobile/twrp-recovery-2-7-1-0-micromax-a300-kitkat/
sp flash tools error
hello i tried it but it gives me an error: "initializing scatter file failed" and even if i click download, it gets stuck at 0%. Please help:crying:
devrookie said:
hello i tried it but it gives me an error: "initializing scatter file failed" and even if i click download, it gets stuck at 0%. Please help:crying:
Click to expand...
Click to collapse
Try latest version of sp tool. And try the whole process again.
Sent from my Micromax A300 using XDA Free mobile app
Already did for three different versions 3.13, 4.0 and 5, no luck
Sent from my Micromax A300 using XDA Free mobile app
Try This
Working Recovery & Root Method
http://forum.xda-developers.com/android/development/recovery-carliv-touch-recovery-micromax-t2824548
Gives the same error...
Sent from my Micromax A300 using XDA Free mobile app
Drivers
devrookie said:
Gives the same error...
Sent from my Micromax A300 using XDA Free mobile app
Click to expand...
Click to collapse
Have you installed the adb drivers?
Yes. I have tried uninstalling and reinstalling too. The only error is the initializing error.
Is it possible to flash using another flash tool?
Or any way to root? Once rooted I can install recovery.
Sent from my Micromax A300 using XDA Free mobile app
ROOT
devrookie said:
Yes. I have tried uninstalling and reinstalling too. The only error is the initializing error.
Is it possible to flash using another flash tool?
Or any way to root? Once rooted I can install recovery.
Sent from my Micromax A300 using XDA Free mobile app
Click to expand...
Click to collapse
Download MTK Droid tools. Install. Then open it and connect your phone and then click on blocks map. Then click on create scatter file.. Then save it somewhere and use that scatter file for flashing. If it doesnt work then try baiduroot for rooting the phone.
devrookie said:
Yes. I have tried uninstalling and reinstalling too. The only error is the initializing error.
Is it possible to flash using another flash tool?
Or any way to root? Once rooted I can install recovery.
Sent from my Micromax A300 using XDA Free mobile app
Click to expand...
Click to collapse
I also face the same problem, try with Flash Tool version 5 and disable the Anti Virus if any intstalled, it will work.
---------- Post added at 03:22 PM ---------- Previous post was at 03:20 PM ----------
i installed the TWRP, now how to enter in recovery

Categories

Resources