Database Info

[root][СWM recovery] Samsung Galaxy S3 GT-i9300 MT6575

Hello guys!
I bought this phone: i9300 mtk6575 (Antutu shows smdk4x12).
GT-I9300 4.8 inch
4.0.4
kernel 3.0.13
ROM IMM76D.I9300ZSALE9
512mb RAM
2213mb sdcard
Whether there is at present ROM for it??? Patches or customize? Let's collect all information on this phone here...
foto phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ROOT​
Files and programs necessary for receiving ROOT:
in archive the TPSparkyRoot program with Root Explorer.
Instruction:
1) turn off phone
2) hold vol+, menu and press on button
3) screen should be blank - download mode
4) insert usb cable to phone.
5) run TPSparkyRoot.bat
5.1)Phone will reboot the first time. After a full load of the smartphone we press «ENTER» a TPSparkyRoot.bat program window.
5.2)Phone will reboot in the second time. After a full load of the smartphone we press «ENTER» in a TPSparkyRoot.bat program window.
5.3)Phone will reboot in the third second time. After a full load the smartphone will be root (but I recommend to overload once again phone manually).
5.4)After phone loading in the list of appendices there should be 2 appendices (SuperUser and Root Explorer). It means that, ROOT is received.
6) rooted!!
For my way the basic (and most likely in it your mistake) are the correctly established firewood on 6575 and the included mode of debugging on USB. If firewood stands "exactly" that in a task manager should be here as on a screen.
-----------------------------------------------------------------------------------------
The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices​
It is required to us:
1). SP Flash Tool program. SP_Flash_Tool_v3.1224.01.
2). MT6575 USB VCOM drivers.
3). A factory insertion for your smartphone.
4). CheckSum_Generate program.
5). (unessentially) Modified recovery.img for your smartphone.
Download already ready Modified Recovery with all necessary files:
View attachment 1376696
Instruction:
0). We unpack archives SP Flash Tool, MT6575 USB VCOM, CheckSum_Generate and archive with an insertion. We copy the CheckSum_Generate program in the folder with an insertion and we start it (in the folder the file of checksums Checksum.ini will be generated). If you have modified recovery, the recovery.img file in the folder with an insertion is replaced with your modified.
1). We switch off the smartphone. The cable isn't connected to the computer.
2). We take out and insert back the battery.
3). (pass, if drivers are already established) we Connect phone to the computer a cable. The operating system will find the new device — specify to system the folder with the MT6575 USB VCOM driver (for the version of OS).
4). (pass, if drivers are already established) we Disconnect a cable from the computer.
5). We start the SP Flash Tool program.
6). We press the Scatter-loading button and we choose the file MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt (it lies in the folder with an insertion).
7). We press the Download button.
8). We connect phone to the computer a cable. The program should see and begin it an insertion. If phone isn't found, disconnect it from computers, pull out and insert the battery and anew connect to the computer.
9). After the termination of an insertion we disconnect phone.
10). It is ready!!!!!
-----------------------------------------------------------------------------------------
The guide to installation of modified recovery (separately from a full insertion) for all MT6575/77 of devices​
Download already ready Modified Recovery with all necessary files:
View attachment 1376696
It is possible to establish modified recovery together with installation of an insertion of phone.
But, if the insertion at you is already established, the system is already adjusted under you, and anew to stitch an insertion it would not be desirable, it is possible to establish modified recovery, without mentioning system and other parts of the device.
For this purpose use "The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices". Only before an insertion (Download button pressing) remove ticks opposite to all points, except RECOVERY. The prevention of the SP Flash Tool program we answer Yes.

reserved

really nobody uses such device and niuky there is no more information on it?

Despera said:
really nobody uses such device and niuky there is no more information on it?
Click to expand...
Click to collapse
thank you for creating this thread! i believed theres many user out there but theres no dedicated thread for it..
the custom recovery u post is it in english?
tQ

This is default rom (unroot) for i9300 mt6575 cpu smdk4x12 :
rom 22/08/2012:
http://www.mediafire.com/?77pwyqmjup7b76p
http://www.mediafire.com/?79eg69x9l6nl9bp
http://www.mediafire.com/?y6sg1iyfc0t6lki
credit goes to nemero16..
---------- Post added at 06:49 PM ---------- Previous post was at 06:37 PM ----------
I have problem with my phone, whenever im receiving sms/missed call/low battery alert ( with blinking led notification green/blue/red ) after that my phone wont enter deep sleep mode ( check with cpuspy ).
I've check with betterbatterystats. in kernel wakelock there's Led wakelock that disable my phone deep sleep.
Do u have this problem?
tQ

simkad said:
thank you for creating this thread! i believed theres many user out there but theres no dedicated thread for it..
the custom recovery u post is it in english?
tQ
Click to expand...
Click to collapse
yes, CWM Recovery only english version

No, I have no such problem, it seems everything well works!
At me only GPS badly catches satellites and the program of navigation doesn't work, i.e. satellites aren't found by GPS...

i cant flash ur recovery... theres an error.. did u flash it using flash tool? whats ur kernel no n date?
tQ

Thanks for creating this thread. Hopefully theres someone with dev knowledge or who can read chinese blog will be able to find other info on this phone.
I just bought this phone a couple of days ago and able to get root access using this method : http://forum.xda-developers.com/showthread.php?t=1886460
My 1st problem that i found is that the wifi signal is very weak and occasionally drop. Even Im next to my wireless router. I've checked with Wifi Booster apps, this phone indicates my wfi router signal strength is -200 wheres my other phone indicates -80 (lower is better).
And i cant really understand your instruction on how to flash custom recovery for this. What is factory insertion?

bayanster said:
Thanks for creating this thread. Hopefully theres someone with dev knowledge or who can read chinese blog will be able to find other info on this phone.
I just bought this phone a couple of days ago and able to get root access using this method : http://forum.xda-developers.com/showthread.php?t=1886460
My 1st problem that i found is that the wifi signal is very weak and occasionally drop. Even Im next to my wireless router. I've checked with Wifi Booster apps, this phone indicates my wfi router signal strength is -200 wheres my other phone indicates -80 (lower is better).
And i cant really understand your instruction on how to flash custom recovery for this. What is factory insertion?
Click to expand...
Click to collapse
Wifi fix: http://forum.xda-developers.com/showthread.php?p=32256247&highlight=wifi+fix#post32256247 :good:
If you are having trouble with SP Flash Tool, search for a video tutorial on how to use it, that worked for me! :laugh:
---------- Post added at 12:36 AM ---------- Previous post was at 12:32 AM ----------
simkad said:
This is default rom (unroot) for i9300 mt6575 cpu smdk4x12 :
rom 22/08/2012:
http://www.mediafire.com/?77pwyqmjup7b76p
http://www.mediafire.com/?79eg69x9l6nl9bp
http://www.mediafire.com/?y6sg1iyfc0t6lki
credit goes to nemero16..
---------- Post added at 06:49 PM ---------- Previous post was at 06:37 PM ----------
I have problem with my phone, whenever im receiving sms/missed call/low battery alert ( with blinking led notification green/blue/red ) after that my phone wont enter deep sleep mode ( check with cpuspy ).
I've check with betterbatterystats. in kernel wakelock there's Led wakelock that disable my phone deep sleep.
Do u have this problem?
tQ
Click to expand...
Click to collapse
This does not work with 6577. :silly:
---------- Post added at 12:41 AM ---------- Previous post was at 12:36 AM ----------
simkad said:
This is default rom (unroot) for i9300 mt6575 cpu smdk4x12 :
rom 22/08/2012:
http://www.mediafire.com/?77pwyqmjup7b76p
http://www.mediafire.com/?79eg69x9l6nl9bp
http://www.mediafire.com/?y6sg1iyfc0t6lki
credit goes to nemero16..
---------- Post added at 06:49 PM ---------- Previous post was at 06:37 PM ----------
I have problem with my phone, whenever im receiving sms/missed call/low battery alert ( with blinking led notification green/blue/red ) after that my phone wont enter deep sleep mode ( check with cpuspy ).
I've check with betterbatterystats. in kernel wakelock there's Led wakelock that disable my phone deep sleep.
Do u have this problem?
tQ
Click to expand...
Click to collapse
This does not work with 6577. :silly:

mrfrustrated said:
Wifi fix: http://forum.xda-developers.com/showthread.php?p=32256247&highlight=wifi+fix#post32256247 :good:
If you are having trouble with SP Flash Tool, search for a video tutorial on how to use it, that worked for me! :laugh:
---------- Post added at 12:36 AM ---------- Previous post was at 12:32 AM ----------
This does not work with 6577. :silly:
---------- Post added at 12:41 AM ---------- Previous post was at 12:36 AM ----------
This does not work with 6577. :silly:
Click to expand...
Click to collapse
yes that rom is meant for mt6575 cpu smdk4x12 as u mention on ur first post.. its not for mt6577. no wonder the recovery u post not working on mine..its for mt6577.

So there no custom recovery for our phone eh?

Phone Bricked
simkad said:
This is default rom (unroot) for i9300 mt6575 cpu smdk4x12 :
rom 22/08/2012:
http://www.mediafire.com/?77pwyqmjup7b76p
http://www.mediafire.com/?79eg69x9l6nl9bp
http://www.mediafire.com/?y6sg1iyfc0t6lki
credit goes to nemero16..
---------- Post added at 06:49 PM ---------- Previous post was at 06:37 PM ----------
I have problem with my phone, whenever im receiving sms/missed call/low battery alert ( with blinking led notification green/blue/red ) after that my phone wont enter deep sleep mode ( check with cpuspy ).
I've check with betterbatterystats. in kernel wakelock there's Led wakelock that disable my phone deep sleep.
Do u have this problem?
tQ
Click to expand...
Click to collapse
Hi Please Post the Links again I am not able to download... Please my phone is bricked

Despera said:
ROOT​
Files and programs necessary for receiving ROOT:
in archive the TPSparkyRoot program with Root Explorer.
Instruction:
1) turn off phone
2) hold vol+, menu and press on button
3) screen should be blank - download mode
4) insert usb cable to phone.
5) run TPSparkyRoot.bat
5.1)Phone will reboot the first time. After a full load of the smartphone we press «ENTER» a TPSparkyRoot.bat program window.
5.2)Phone will reboot in the second time. After a full load of the smartphone we press «ENTER» in a TPSparkyRoot.bat program window.
5.3)Phone will reboot in the third second time. After a full load the smartphone will be root (but I recommend to overload once again phone manually).
5.4)After phone loading in the list of appendices there should be 2 appendices (SuperUser and Root Explorer). It means that, ROOT is received.
6) rooted!!
For my way the basic (and most likely in it your mistake) are the correctly established firewood on 6575 and the included mode of debugging on USB. If firewood stands "exactly" that in a task manager should be here as on a screen.
-----------------------------------------------------------------------------------------
The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices​
It is required to us:
1). SP Flash Tool program. SP_Flash_Tool_v3.1224.01.
2). MT6575 USB VCOM drivers.
3). A factory insertion for your smartphone.
4). CheckSum_Generate program.
5). (unessentially) Modified recovery.img for your smartphone.
Download already ready Modified Recovery with all necessary files:
View attachment 1376696
Instruction:
0). We unpack archives SP Flash Tool, MT6575 USB VCOM, CheckSum_Generate and archive with an insertion. We copy the CheckSum_Generate program in the folder with an insertion and we start it (in the folder the file of checksums Checksum.ini will be generated). If you have modified recovery, the recovery.img file in the folder with an insertion is replaced with your modified.
1). We switch off the smartphone. The cable isn't connected to the computer.
2). We take out and insert back the battery.
3). (pass, if drivers are already established) we Connect phone to the computer a cable. The operating system will find the new device — specify to system the folder with the MT6575 USB VCOM driver (for the version of OS).
4). (pass, if drivers are already established) we Disconnect a cable from the computer.
5). We start the SP Flash Tool program.
6). We press the Scatter-loading button and we choose the file MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt (it lies in the folder with an insertion).
7). We press the Download button.
8). We connect phone to the computer a cable. The program should see and begin it an insertion. If phone isn't found, disconnect it from computers, pull out and insert the battery and anew connect to the computer.
9). After the termination of an insertion we disconnect phone.
10). It is ready!!!!!
-----------------------------------------------------------------------------------------
The guide to installation of modified recovery (separately from a full insertion) for all MT6575/77 of devices​
Download already ready Modified Recovery with all necessary files:
View attachment 1376696
It is possible to establish modified recovery together with installation of an insertion of phone.
But, if the insertion at you is already established, the system is already adjusted under you, and anew to stitch an insertion it would not be desirable, it is possible to establish modified recovery, without mentioning system and other parts of the device.
For this purpose use "The guide to an insertion by means of SP Flash Tool for all MT6575/77 of devices". Only before an insertion (Download button pressing) remove ticks opposite to all points, except RECOVERY. The prevention of the SP Flash Tool program we answer Yes.
Click to expand...
Click to collapse
Hi I am in mere need for the official rom (Android 4.0.4) please share the links with me...
Please i beg you for the official rom...
The mediafire links are not working...
Please please provide me the links... the phone is completely bricked...

Hello John,
Sorry for late reply.. Here is the link for rom kernel=Mon Sep 24 18:12:33 CST 2012, build version=1348481485 i think its the latest rom. The link is in chinease (use google translator if needed) u must signup before download. The moded recovery also in chinease (u need to figure it out) i dont found english version. Maybe someone can translate it to english? Flash this moded recovery using flash tool as describe on first page.
Put rom (9300_75_ROOT_SD1_Camera_1013.zip) on root of sdcard. To enter recovery, Press n hold vol- the press power on. Scroll down to line 5, press power button. select 2nd line press power button, then select 9300_75_ROOT_SD1_Camera_1013.zip. After finish go back to front menu by pressing back softkey, then select 1st line to reboot..
Hope that fix ur bricked phone.
Gud Luck
Rom :
http://dl.vmall.com/c0gwaplkln
Moded Recovery :
http://dl.vmall.com/c0y2ibavev

Thanks Ill try and give you the feedback!!! I hope its an official rom and Android is 4.0.4 as from the name of the file "9300_75_ROOT_SD1_Camera_1013.zip" i cant figure out...
Also why SD1_Camera is mentioned in the name is there some special purpose to mention the same...

HI,
Yes the Rom worked fine and my phone got life, but i am facing many network issues and its an rooted rom... I am need of the official rom which you have posted in the mediafire links which are not working... so is it possible for you to reupload the official rom? please...
Thanks,
John

I have a noob question. This phone have one micro sim slot, and another slot is normal sim. But in my phone, the second slot (normal sim) was blocked by an solid card, and i can't pull out it.
How can I use normal sim ??? cut off it like photos in #1 ???
Sorry for my English.

@ johnsource
glad ur phone is back to life... i post the link for official unrooted rom later..
@khongancom
if ur phone is same like us... refer to first post photo, then u can remove dummy sim by pull it down. theres a sticker cover it, tear it abit to uncover the dummy sim...
tQ

Driver issues mt65xx,solved (easy),mediatek devices(canvas a116)

1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
waNNa AppReCiate

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Still showing the same error: "S_BROM_CMD_STARTCMD_FAIL (2005)". Please tell me what to do.
Another thing, when I connect my A25 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?

Follow the same procedure with this drivers http://www.mediafire.com/?31nddwqdot5ajp2
Sent from my Micromax A110 using xda premium

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg

i have tried this method and it works 100% try with different ports it should work and make sure which version u have 32 bit(x86) or 64 bit(x64)

Anybody know how to get one of these phones to connect with the tmobile network?

Well all this mediatek devices are unlocked .so any carrier sim should work
Sent from my GN708W using xda premium

gregferns said:
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg
Click to expand...
Click to collapse
Follow the below approach to install the drivers on Windows 8:
1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it's there click on the gear icon with the title "Settings".
2. Now click on the entry "More PC Settings", then click on the entry "General".
4. Scroll down to "Restart now" (under "Advanced startup") and click it.
5. Wait a bit for a menu.
6. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
7. Click on "Restart" and wait for the profit to happen.
When the computer restarts, select the option "Disable driver signature enforcement". After it finally booted into the operating system you can install the unsigned driver. After you've installed the driver reboot once again and you're done.

hafizimtiaz said:
Still showing the same error: "S_BROM_CMD_STARTCMD_FAIL (2005)". Please tell me what to do.
Another thing, when I connect my A25 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?
Click to expand...
Click to collapse
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.

n4w4k said:
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Click to expand...
Click to collapse
worked for me also
first you have to install those above given drivers
and after that you able to:highfive::highfive::highfive::highfive:

Thank you so much!

When i connect device to pc via usb.. a sound comes and it shows in list of drivers as in other devices and within 2 seconds it removes from device manager with another sound.. i did try this many times but same result..
Wat to do?..
Sent from my A116 using xda premium

gregferns said:
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg
Click to expand...
Click to collapse
I m having same issue in windows 8..did u got any solution ?
---------- Post added at 10:08 AM ---------- Previous post was at 09:41 AM ----------
avi_wizard said:
Follow the below approach to install the drivers on Windows 8:
1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it's there click on the gear icon with the title "Settings".
2. Now click on the entry "More PC Settings", then click on the entry "General".
4. Scroll down to "Restart now" (under "Advanced startup") and click it.
5. Wait a bit for a menu.
6. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
7. Click on "Restart" and wait for the profit to happen.
When the computer restarts, select the option "Disable driver signature enforcement". After it finally booted into the operating system you can install the unsigned driver. After you've installed the driver reboot once again and you're done.
Click to expand...
Click to collapse
great it worked for me :good:

guys help me i have gionee p2 mtk6572 but i cant install the drivers on windows 8 help me with the drivers or how to connect the device please....!!

How to flash without scatter file????????????

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Thanks mate. It helps.

solved my problem with windows 7 installation using guide wrote below
hope it helps some one
MT65xx Driver
MT65xx Drivers guide
press thanks if it works

Well.
I've posted in other similar threads today but its because i really need help - running out of alternatives.
I've partially bricked my THL T200 - it is stuck in bootanimation after i removed gallery.apk from the rom using TitaniumBackup.
Already tried all those flash methods in different sequences (with battery, without battery) but my phone just connect\disconnect all the time - i can't even install the VCOM driver.
I've TWRP installed - is there any rom for this phone i can flash using this.
All i want is go back to stock.
Thanks in advance for any ideas !

abhishekjain.ims said:
I m having same issue in windows 8..did u got any solution ?
---------- Post added at 10:08 AM ---------- Previous post was at 09:41 AM ----------
great it worked for me :good:
Click to expand...
Click to collapse
Bro, how did you install it on win 8?? i have win 8.1 64 bit OS and whenever i try installing this following the same procedure, it says "The folder you specified does not contain a compatible software driver for your device." i' unable to install this darn driver.. please help

n4w4k said:
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Click to expand...
Click to collapse
mayank88288 said:
worked for me also
first you have to install those above given drivers
and after that you able to:highfive::highfive::highfive::highfive:
Click to expand...
Click to collapse
I Cant install the given drivers if MT65xx preloader disapears..?
And when i connect in off mode to my laptop and flash tools on download mode it does nothing my phone just goes charging?
See this thread: http://forum.xda-developers.com/general/help/mt65xx-flashing-problem-sp-flash-tool-t2846054

[GUIDE] Use Research Download (Spreadtrum ROM Flash)

How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip

Fail: Preserve Calibration fail (cannot find nv item in nv) What does it mean?
I just made up the PAC file with NV = mtd6.backupfixnv.yaffs2.img extracted from other phone (same model). This is what was supposed to be done isn't it? Is the error saying that I got a wrong nvitem file or something?
I couldn't extract nvitem.bin file so I just pointed it to the mtd6.backupfixnv.yaffs2.img file.
Thanks ...

Good Guide!
All steps are described clearly...
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
:victory:

brijeshep said:
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
Click to expand...
Click to collapse
Thanks for the feedback. I don't have one of those phones so i was not aware of that . Cheers

Not working for Micromax Bolt A34
Ravage32 said:
How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip
Click to expand...
Click to collapse
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.

Java Baba said:
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.
Click to expand...
Click to collapse
i have the same problem =/

soko89 said:
i have the same problem =/
Click to expand...
Click to collapse
Have you tried changing the budrate? For spreadtrum SP6820 the default is 115200 for other phones im not sure what i would be, have a go with different ones and see which ones work Cheers

Help Me Please...
Can you please help me by any way to add a new language to the .pac file.
I couldn't decompile the system.img file which extracted from the official .pac file by Research Download.
I just want any way to edit the extracted system.img or a way to create a custom system.img.
Note: I have another .pac file contain the wanted language but it doesn't work on the device.
Thanks in advance

For those who wants to make a .pac file from spreadtrum backup
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8

abhimortal6 said:
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8
Click to expand...
Click to collapse
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?

akisg said:
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?
Click to expand...
Click to collapse
its already a .pac file just rename it to " .pac " from " .p5c "

Pressed Play Button And connected my device..
but no any progress shown in Research download..plz help..

Make sure you have ALL the drivers installed correctly and that when u first connect it its showing up as somthing like "Spreadtrum phone" connected in your new devices popups. Probably good to restart the computer after you install the drivers. Are you using 64 or 32 bit? Ive had lots of troubles lately with 64bit windows 8 because drivers would not install because of signature verification. Works better on windows 7.

P5C file flash tool
Use this micromax A075 flash tool to flash .p5c file
salim

Getting FDL2 Error.sir plx help me..
Device-Karbonn A6

Need more info haha . Are you using different FDL's cuz some roms are able to use just a set of FDL's which can be used with all custom roms/flashing. If not and you have a pac file, most likely its not for you phone.

I have a T9500b htm and I have a doubt, in steps 5 and 6 what options must i select and what not. ? the phone block with to much unlock tries, I trying to do a factory restore. I don't want brick the phone.

cant use the spd tool
i flashed a wrong boot image to my phone (Itel 1502 , sp7731) using flashify. then after a reboot my phone got stuck on the boot menu just displaying the inote logo.
i thought on flashing a fresh stock rom.
but the problem is, after connecting my phone to the computer it displays windows cant recognise the usb device. then the spd tool displays that the device is unpluged.
please help.

Micromax A27/O+ 8.31 Android
Good Day Ms. / Mr. ?
I have O+ 8.31 android that are compatible with the OS of micromax a27.. I used this tool for flashing stock rom of my bootloop phone and it will be ok. But when i tried to uncheck some files and i only select boot logo to change the logo of stock rom of MM a27 after i flash the logo of O+ my phone is dead, i tried to switch on and it will never turn on and when i connect my phone in my computer, cannot be detected my phone even charging it is does not work?? I think i deleted the whole OS of my phone?? But the battery of my phone is full!! What can I do now to fix it?? Please help! ???? thanks for advice in advance! ??

hello sir. I've tried your guide but mine is on working. when i hit start download button their no progress of status showing or any happens. please help i want to flash O+ 8.96 phone.thanks

[Tutorial] QHSUSB_DLOAD Hardbrick Fix for I9505

Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.

i can dbrick s4mini gt-i9195 please help

It will work with my Galaxy S4 Active (SHV-E470s)?

Can you force the QHSUSB_DLOAD
Help !!!
After trying the procedure, I did not timely drag the files !!! Now it turns green all the green screen, but when I connect it to the pc no holes detected no door !!! Can you force the QHSUSB_DLOAD or Qualcomm HS-USB QDLoader 9008 ???? Sorry my bad english !!!
It is also possible for s4 mini i9195 ????

Thank you so much ,it worked for me on Windows 7. Galaxy s4 I9505.

thank you soooooooooooooooooooooooo much.!?

video please please

After trying this method . Don't u suffer from any display problem ? I tried this and it worked for me but i have now display problem . it's a little yellow and it appears always download mode .

Can I backup my phone when in download mode?

i got status 29 error: system could not write the files to specified device please help

Can this be made for a i9195 model???

kent8hd said:
Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.
Click to expand...
Click to collapse
Plz help me i am using this tutorial to fix my p5100 device but it shows permission denied . Other then samsung note 4 repair tool , I got appropriate things for my device. Plz help

Thank you a lot! It worked!
It took me a bit of time, this is my extra info for others:
- When doing the step 3, a command window with scrolling text will appear with 2 lines. You must do the copy paste thing BEFORE the text starts rolling as that indicates it started using those files. If no window with text opens, try again
- With odin I had 2 problems: One, that it was failing to do the copying, the reason was that I was using a wrong ROM. Second was that a ROM was written, but it was the incorrect one so I had to start again from step 0.
So try a different ROM.
I read the cable may be a problem too, but it wasn't in my case.
In between retries and after succeeding, removing the usb cable AND the battery may help.

Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool

Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers

How to make emmc image sdcard..can u plz ilaborate...

jaschhabra said:
How to make emmc image sdcard..can u plz ilaborate...
Click to expand...
Click to collapse
Refer to the first link given in the post.

After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
No idea how to resolve the issue you're facing. Shall let you know if I find any solution.

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
Me also stucked at the same problem any solution???

R4th0r3 said:
Me also stucked at the same problem any solution???
Click to expand...
Click to collapse
solved??

same problem
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.

Coolpad dazen 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me.

Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]

[email protected] said:
There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.
Click to expand...
Click to collapse
Link updated - - - https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing

Imssk said:
Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]
Click to expand...
Click to collapse
No solution yet. Shall update if there's any.

[email protected] said:
Coolpad dazen 1
please help me.
Click to expand...
Click to collapse
Do hard reset and check.

After all the process..my phone is starting vibrating continuosly with emmc image sd card. without emmc sd card not any activites fully dead..woth any info on screen...no booting comes. no connecting fastboot mode (no any information on screen, fully blank & not charging show display. after connecting device to pc, device not detecting in pc, how to connecting device to pc? what to do now. please help me.

Zauq said:
No solution yet. Shall update if there's any.
Click to expand...
Click to collapse
Thanks for your quick response. I hope and request that you will soon find a working solution. because I have only one phone and that too is dead now. I hope you understand....

I successfully revived my dead phone by following this guide.Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all...:good:. Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices......:laugh: .....Also place the fastboot files before running the batch file.
---------- Post added at 09:37 AM ---------- Previous post was at 09:12 AM ----------
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this thread (to flash all the scattered file using batch file. fastboot files should be in that folder too)
If anybody tried and suceeded, then give a reply too

Zauq said:
Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers
Click to expand...
Click to collapse
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.

Khanalltech said:
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.
Click to expand...
Click to collapse
Following is the written by a Coolpad Daze 1 user who was able to revive his device. He was facing the same issue you're facing. First follow his method and later mine and see if it helps.
https://forum.xda-developers.com/ge...-dazen1-qualcomm-t3362253/page15#post72483446
(Quote:
Originally Posted by Avinash2
I successfully revived my dead phone by following this guide .Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all.... Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices...... .....Also place the fastboot files before running the batch file.....
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this link (to flash all the scattered file using batch file. fastboot files should be in that folder too and phone' driver should be installed)
If anybody tried and suceeded, then give a reply too)

I can suggest another idea i.e shorting pin method...
If phone is dead and want to flash , it can be done by QFIL .
By connecting phone in qualcomm HS Qdloader 9008, it can be achieved by shorting pin method...
But the thing is that i don't know which pin are to be shorted...
I tried finding in youtube, but didn't get for dazen 1.
Can anyone find those pin which are to be shorted