Just disassembled the S8 active and gotta say I found it to be much easier than working with the regular S8 or prior phones. Glad to see it comes apart from the rear not the front!
https://www.youtube.com/watch?v=OW0roi0D_aM
pwrdbykyank said:
Just disassembled the S8 active and gotta say I found it to be much easier than working with the regular S8 or prior phones. Glad to see it comes apart from the rear not the front!
https://www.youtube.com/watch?v=OW0roi0D_aM
Click to expand...
Click to collapse
Can you confirm at all that the motherboard is the same as a regular s8? looking at all of the parts it appears so. My plan is to buy one of the bad imei or frp locked phones and do an exynos swap on them and remove that dumb plastic screen cover. The only thing that I cant really find confirmation on is the power and button flexes. They are hard to find for the active and the one thing that could possibly be different between the two s8 versions.
kekistaneerefugee said:
Can you confirm at all that the motherboard is the same as a regular s8? looking at all of the parts it appears so. My plan is to buy one of the bad imei or frp locked phones and do an exynos swap on them and remove that dumb plastic screen cover. The only thing that I cant really find confirmation on is the power and button flexes. They are hard to find for the active and the one thing that could possibly be different between the two s8 versions.
Click to expand...
Click to collapse
Sorry for the late reply, I have not personally taken apart the regular S8 so I can't be too sure, but I would assume they would keep the main board the same but I could be wrong. The plastic screen cover helps the screen to be shatter resistant. Removing it would make the screen prone to breaking easier.
pwrdbykyank said:
Sorry for the late reply, I have not personally taken apart the regular S8 so I can't be too sure, but I would assume they would keep the main board the same but I could be wrong. The plastic screen cover helps the screen to be shatter resistant. Removing it would make the screen prone to breaking easier.
Click to expand...
Click to collapse
I actually did some more research and ended up going a different route. The board and button flexes are indeed the same parts but I moved back to a custom housing iPhone for a while :/
Hi Guys, noob here. I got a S8 Active motherboard that someone gave be but I iddn't know the difference so I just went and bought the frame and LCD for a regular S8 on eBay. Then I realized I might have bought the wrong one. Can you confirm if the S8 Active logic/motherboard is compatible with regular S8 body and other parts. Thanks.
Related
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
Hello all I hope someone here can guide me because I am at a loss.
A couple weeks ago I cracked my screen and have been searching for a replacement
Digitizer since then but everywhere I look is either out of stock or comes with the
LCD (which I don't need ).
I know this is a bit forward for my first post here but I am hoping someone
may have a suggestion as to where I might be able to pick one up so I can finally get my phone back to it's
original glory.
Thanks in advance for any help/suggestions on this matter.
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
ampedoe Luise
SkuterPL said:
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
Click to expand...
Click to collapse
From what I have read the glass and the digitizer are one piece but it is possible to separate the LCD in this guide :
androidforums. com/htc-one-s/609247-how-fix-htc-one-s-screen.html
Problem is every website I have looked at the glass/digitizer is out of stock and it's triple the price to get it with the LCD.
you can't separate, because in amoled all layer are connected in fabric.
http://www.oled-display.net/wp-content/uploads/u2/super-amoled-technical-details.jpg See this pictrue the touch sensor is under glasses.
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
HidaKureku said:
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
Click to expand...
Click to collapse
I appreciate you taking the time to clarify that for me, I had hoped it would have been easier than that. I can start looking for the correct part now and finally get my phone sorted out.
Again thanks for your help.
Question:
My sweet little girl scratch "gorila" glass on my one s.
Is it possible change only glass, i plan to buy spare part from this link:
etradesupply.com/oem-htc-one-s-glass-lens.htm
hey guys mrs has had the s7 a few days before release date and has dropped it, and luckily enough it wasnt the screen but matter of fact cracked the back of the phone now i need to know if you can buy the glass or weather its a whole back that i need the problem ive got is that the IMEI number is actually located on the back of the phone.
If its in the wrong section please remove
thanks for reading guys
CHIPPAUK1 said:
hey guys mrs has had the s7 a few days before release date and has dropped it, and luckily enough it wasnt the screen but matter of fact cracked the back of the phone now i need to know if you can buy the glass or weather its a whole back that i need the problem ive got is that the IMEI number is actually located on the back of the phone.
If its in the wrong section please remove
thanks for reading guys
Click to expand...
Click to collapse
It's gorilla glass, likely fused to the body. If you could clear the adhesive completely and actually find a supplier for the back panel you could likely replace but I don't know of any.
CHIPPAUK1 said:
hey guys mrs has had the s7 a few days before release date and has dropped it, and luckily enough it wasnt the screen but matter of fact cracked the back of the phone now i need to know if you can buy the glass or weather its a whole back that i need the problem ive got is that the IMEI number is actually located on the back of the phone.
If its in the wrong section please remove
thanks for reading guys
Click to expand...
Click to collapse
I'm pretty sure that info is beneath the glass but either way the information is in the Settings menu under about phone. The S6's glass could be replaced and I'm 99% sure the S7 will be the same once people get ahold of spare parts to sell.
I have the same issue I'd just use it . it's still water resistant due to film behind the glass.
My concern is water resistant quality that will be compromised by doing the swap
Buy a dbrand skin and cover in up?
Just saw this on eBay. It looks like it includes color on back side meaning loss of imei.
http://www.ebay.com/itm/New-Glass-B...hash=item1a1060da46:m:mdvjzQWi4TTmGXrj7nZKe7Q
Why do you care about the IMEI on the back of the phone when you can just go to settings>about phone and check the imei there lol.
Just get a skin and cover it up!
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
Your best bet for a guide to follow that also has images is on the following link.
https://www.ifixit.com/Device/Samsung_Galaxy_S5
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
No, it isn't if you've never done this before.
Reasons are the next:
1. The risk to damage LCD-assembly is very high.
2. The risk to buy a non-suitable bezel (middle frame, or "rear case" how Samsung calls this part) is very high. They are different for different variants of S5 and contain different main antennas inside gray plastic.
Your best bet is to wait for a crack in the screen. You're also gonna screw up the adhesive around the screen and you could literally break keys underneath (no backlight anymore)
Unless you can pop in a nail and try to lift up the screen yourself... as it happens when device is old.
As of now new Original screen is around 100€, which is one of the best display today.
I'll just stick a case on and be done with it..just get a new charge port cover and that'll do..haha
I just installed a new charger port cover. Cost me $3.50 and took 5 minutes to install.. If you really want to change the bezel do a google search on how to do it.. There are plenty of videos which will show you the steps..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
after watching several instructional videos on how to disassemble my s5, i realized its not worth it. they water-proofed the crap out of it with multiple layers of adhesive. using a heat gun to soften the glue is a pain, and can also damage the components.
if you use some kind of very soft heat gun and a "sucker" while sliding in a small credit card, you can do it. it is all about being delicate...
The bad thing to replace the bezel frame is that you have to unmount the whole phone, and at last remove the screen. It's glued to the frame with an adhesive band and it's very difficult to remove it without breaking it. And probably you'll need a new adhesive to mount it again to the frame, otherwise parts of the screen will remain elevated from the bezel.
And it's very easy to break the AMOLED screen connector between the mainboard and the screen if you don't know where it is. First, you'll have to watch several youtube vids to get to know how to disasemble the phone and where the connector is.
And if you dare to replace it and you fail, there're cheap alternatives like this: https://lltrader.com/collections/s5/products/samsung-galaxy-s5-display-assembly-no-frame but it's not an original AMOLED, it's a LCD and very fragile, keep it in mind.