I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
Related
I am experiancing some problems!
basically I think the manufacturer installed protective screen has come loose from the hard sensor (due to use?) and so the stylus is pushing on an air bubble, and with the software keyboard (virtual keyboard) the wrong buttons are getting pressed.
I dont know whether to cut out that layer with a scalpel (carefully) and use normal screen protectors that stick properly ... has anyone done this before?
Maybe you could apply heat to it to tighten it or something I dont know so I need help!
My phone is an alpine (xda2i) but other pdas must be having the same issue?
is it ok to cut the initial plastic screen that comes integrated with the xda?
Just make sure it is actually a protective screen and not the digitizer (the membrane that makes it touch screen and sits on the LCD) that your cutting away.
with a protective skin there should be no need to cut anything... I honestly think your talking about the digitizer - in which case take to a mobile phone specialist and they could heat sync it for you.
To check whether it is the digitizer or the crappy screen protector, you should be able to see the edge of the layer at the side, especially manufacturer orginial screen protector, they are really crappy. You should be able to seperate the layer (from the edge) with something pointy (e.g. a needle), and then peel it off from there.
If you didn't see any distinguishable edge at the edge of the screen, chances are you should not do anything yourself.
Jonjamesm said:
Just make sure it is actually a protective screen and not the digitizer (the membrane that makes it touch screen and sits on the LCD) that your cutting away.
with a protective skin there should be no need to cut anything... I honestly think your talking about the digitizer - in which case take to a mobile phone specialist and they could heat sync it for you.
Click to expand...
Click to collapse
Thanks for the responses!!!
I have a feeling that it is what you are referring to as a digitizer. Do most of the mobile phone shops do this heat option? as after googling it, not much comes up, or is it referred to under a different terminology,
thanks in advance!
Rob
If your UK based you can find out more about them from apex laptops, google them...
I'm in Edinburgh, and it took me a while before I found someone willing to replace the digitizer.
This is not a common thing - but I think with the introduction of the iphone the markets for heat syncing will go up, I suggest freeing up an afternoon and go to some of those dodgy shops that offer the unlocking service, also some computer repair shop technicians might be confident in doing something of this nature.
Happy hunting!...
JJ McG.
thanks for your help
whatever you do dont approach o2. they are ridiculous, they want to charge 350 dollars to peel off the old one and put a new on one. search ebay and you will find digitizres with screwdriver and peeling, firming tool for 15 dollars plus postage.
o2's repair guys say it "original" spares which make it so expensive....
right...........
rang up
rang up a couple of shops one doesn't do heat sync and the other does but the machines bust, he started talking about soldering etc...(does that sound like it?) but when i re-described the problem he started talking about 50 60 quid for a new screen! which I am not prepared to pay for the relatively minor problem
How is a digitiser different from a normal screen protector anyway?
(placing a normal protector on top of it sort of helped reduce the problems because it applied a little firmness over the offending area....)
O.k the digitizer is not a screen protector. The Digitizer is a membrane that sits atop the LCD.
Note: that the LCD is not a touch screen and the only thing making your device a touch sensitive is this digitizer
digitizers can be pricey, but the reason your guy is costing it at 50 - 60 quid is because he is the middle man and needs to make a profit. You can find digitizers from apex laptops or GPS midlands (links below) and buy them at trade prices
http://www.gpsmidlands.co.uk/index.php?menu=Home
http://www.apexlaptops.co.uk/touchscreens.htm
Dependant on your device will depend on the price.
My guy asked for 10 pounds to replace my screen, which I thought was more than reasonable because if he broke the LCD whilst replacing the digitizer (which he did) he was liable to replace it. Make sure that your guy will do this.
hope this helps.
after googling...
After googling for a bit, I came across someone who had these sort of problems with their own pda
http://jamescrisp.blogspot.com/2007/05/fixing-palm-treos-digitizer-touch.html
it seems that dirt stuck under the sides can cause the same kinds of problems,
after running a bit of paper under the corners of the screen I have found some interesting results, the problems I have have changed slightly and seem to rectify temporarily when I press down (rub down) on the screen...
so I might look at taking it apart with some tools off ebay or something and giving it a good clean... any recommendations on how to strip down and clean an Alpine....? actually I'll repost that in the aline forum if there isn't already a post there....
hope your confident in doing so - I'd take it to a shop if it pisses you off that much - taking it a part and cleaning might end up with you just having a big screen phone with no touch pad...
Up to you, hope your successful
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
So my youngest knocked my wife's phone off the table and cracked the screen. Looks like the "glass", digitizer, and LCD are all one piece. The best price I found was in Texas for $65. The company I spoke with on the phone seemed friendly.
Anybody replaced one yet?
I haven't taken mine apart yet. Take lots of pictures and document the process. I am sure it will be of benefit to lots of people. Also post the link to where you got the parts. That would also be helpful.
Sent from my SAMSUNG-SGH-I897 using XDA App
Will do. I didn't post the link thinking some might call SPAM. I got it from www.globaldirectparts.com. The person I spoke to on the phone said they test all parts before they go out so plan for a test delay before it's boxed.
dweebs0r said:
I haven't taken mine apart yet. Take lots of pictures and document the process. I am sure it will be of benefit to lots of people. Also post the link to where you got the parts. That would also be helpful.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I've done a few iPhone 3G screens in the past. Even though this one's not $13, I'm glad I don't have to break out the heat gun to separate the glass...
hallfleming said:
So my youngest knocked my wife's phone off the table and cracked the screen. Looks like the "glass", digitizer, and LCD are all one piece. The best price I found was in Texas for $65. The company I spoke with on the phone seemed friendly.
Anybody replaced one yet?
Click to expand...
Click to collapse
From the dismantle guide that someone else posted, it does not seem to be too hard of a fix. The glass/digitizer/SAMOLED screen should all be one part since that is the beauty of what makes SAMOLED thinner than an LCD, there is no air/air gaps.
Seems like a good price for the whole shibang. Iphone screens cost more than that I thought and suck to replace.
I think it will be an interesting project to see how easy it comes apart and how easily the screen is replaced. I have done a few iPhones and a Blackberry Bold screen.
The more detailed the documentation the better.
65 Bucks isn't bad for a brand new phone on the market. Please please please take lots of detailed pics. I replaced numerous iphones glass and lcd's all the way from the 1gen to the 3gs, 6 in total(2 weren't mine). Hopefully it's as easy as those to replace. First day after the iphone 4 came out and friends were breaking their glass and coming to me to get them replaced digitizer and lcd combo's were running 145. But document this please. I'm interested to see what other fun stuff is under the front of the phone, already seen what's going on on the back side.
I have already torn my phone apart and taken pictures and a step by step of how to do it:
http://forum.xda-developers.com/showthread.php?t=740022
I hope that gets you far enough to replace what you need
Replaced the screen. Not to bad. Easier I think than the iPhone glass replacement. I took some pics. How shall I post them?
I think what iLoki did was harder than the glass replacement....
Make an open photobucket album or you could load to photobucket and just paste them in the thread with what you did. Interested to see how it looks.
What would you say the quality of the screen is? How does it compare to the stock AMOLED?
Alright. Much like a iPhone 3G/3GS, there's some sticky tape involved. Rather than splitting the glass from the LCD, you'll be pulling all glass, digitizer and lcd out. One tool I recommend for splitting the glue tape, a guitar pick. They actually send those with some of the iPhone screen kits. And grab your spouses hair dryer...
First off, thanks iLoki for the instructions. Removing the back plastic I think was the hardest. Just out of raw fear you'll snap the final upper clip. It pops when you remove it but don't waste a good panic when you hear the sound.
On the final steps of iLoki's instructions, you remove the ribbon cable under the blue tape to remove the speaker assembly. You can skip this step. Just pull the one screw that holds the assembly to the chassis. you can remove the mainboard and speaker in one piece. After that, pull what I assumed is the radio assembly on the bottom of the chassis to avoid snagging anything. It pulls right out after you disconnect the white antenna cable.
When the mainboards out, it's time to unglue. I used a hair dryer rather than a heat gun this time. It worked fine. I used low fan, high heat for about 60 seconds on each side I was working with. Use the guitar pick to start separating the screen from the chassis. You'll see the black tape that runs around the chassis in the picture. Don't worry about destroying that black seal tape. It comes with the screen. I did one side and worked the bottom, top and then the final side. If the glue is stubborn, try some more heat. Use common sense with that.
Once the screens separated, pull the black tape from the chassis. Be careful around the 4 bottom buttons. There's a silver metallic ribbon cable underneath. You'll see it in my picture with the tape rolled back.
The new screen came with 2 seperate sticky tape pieces on the screen. One for the perimeter and one for the main part of the screen. Peel them off and align it for install. Make sure the ribbon cable for the screen goes through the slot on the chassis. To get the screen "squared" up for adhesion, I used the speaker grill for alignment. AKA, start at the top, and lay it down top to bottom.
That's about it. Let me know if you have any questions. I'm around Atlanta so if I can ever help in person, let me know!
The screen is a OEM Samsung screen. Logo's and everything. The logo's are under the protective sticker on the front that says "made in China". Scared me at first...
flashman2002 said:
Make an open photobucket album or you could load to photobucket and just paste them in the thread with what you did. Interested to see how it looks.
What would you say the quality of the screen is? How does it compare to the stock AMOLED?
Click to expand...
Click to collapse
hallfleming said:
The screen is a OEM Samsung screen. Logo's and everything. The logo's are under the protective sticker on the front that says "made in China". Scared me at first...
Click to expand...
Click to collapse
Does it have the Death Star symbol and "at&t" at the top?
Yep! Just for you...
PersonOfKnownOrigin said:
Does it have the Death Star symbol and "at&t" at the top?
Click to expand...
Click to collapse
OMG yall are some brave souls, lol.
so did your wife or kid break your screen? Title and OP conflict :/
Just ordered my screen
and I will be attempting this same "operation" myself in 5-12 days when the screen arrives... during a routine "check out how cool my gorilla-glass is" demonstration my amoled screen under the gorilla glass broke... yes, I am probably not the smartest person in the world.
Anyways, $73 later I will be getting my replacement screen from globaldirectparts.com - I'll let you guys know how it goes.
james.roddy said:
and I will be attempting this same "operation" myself in 5-12 days when the screen arrives... during a routine "check out how cool my gorilla-glass is" demonstration my amoled screen under the gorilla glass broke... yes, I am probably not the smartest person in the world.
Anyways, $73 later I will be getting my replacement screen from globaldirectparts.com - I'll let you guys know how it goes.
Click to expand...
Click to collapse
In all of your demonstration, did you develop a scratch, or did the screen just break?
Cuz if its just the screen breaking, I'll probably remove my screen protector.
man this might be worth ordering as a just in case at that price. can't believe the super amoled is that cheap considering the whole hoopla about how much they cost to make. Thanks for the link!
Just bought my captivate for 50 bucks from a guy who cracked the LCD. Replacement parts are on the way. Does anyone have anymore pictures or maybe a disassembly video? Thanks
well the dredded mysterious screen crack happened and im going to fix it myself, but now to the question will the front glass work from any s3 or do i have to get the glass for the verizon model?
thanks in advance for any info
silveradodmax said:
well the dredded mysterious screen crack happened and im going to fix it myself, but now to the question will the front glass work from any s3 or do i have to get the glass for the verizon model?
thanks in advance for any info
Click to expand...
Click to collapse
Any glass will work.
I reccomend buying one labeled for the international version. As they are normally cheaper on eBay.
And just incase you somehow break the LCD while replacing glass. (Seen it happen)
I would recommend shipping your phone to Samsung because
they do it cheaper( shipping, parts, labor) then any parts you can buy.
Hit that thanks if I pointed you in thee right direction
Sent from my SCH-I535 using xda app-developers app
Be careful
BE CAREFUL take your time!
(I don't need criticism, I know I'm a screw up)
Some tips from a failed attempt:
-Environment is important, good lighting and dust free is key! (didn't realize i failed until i got better lighting)
-wear safety glasses! (seriously first piece flew in my eye, not the best feeling.)
-stay away from exacto razor knife (ended up cutting the digitizer)
-use lots of heat! the more heat the easier the pieces will come off. (but don't melt it either)
-wear gloves because your probably not getting it hot enough if you aren't wearing gloves (hands will be in the way of the heat gun)
-be sure when you are lifting the pieces off that they are not pulling up on the lcd. ( i think this is what broke mine)
-don't use your tools as leverage for separating the glass from the digitizer/ lcd. use a calendar! (if the above didn't break my lcd it was using the knife to pry the glass from it.
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
Your best bet for a guide to follow that also has images is on the following link.
https://www.ifixit.com/Device/Samsung_Galaxy_S5
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
No, it isn't if you've never done this before.
Reasons are the next:
1. The risk to damage LCD-assembly is very high.
2. The risk to buy a non-suitable bezel (middle frame, or "rear case" how Samsung calls this part) is very high. They are different for different variants of S5 and contain different main antennas inside gray plastic.
Your best bet is to wait for a crack in the screen. You're also gonna screw up the adhesive around the screen and you could literally break keys underneath (no backlight anymore)
Unless you can pop in a nail and try to lift up the screen yourself... as it happens when device is old.
As of now new Original screen is around 100€, which is one of the best display today.
I'll just stick a case on and be done with it..just get a new charge port cover and that'll do..haha
I just installed a new charger port cover. Cost me $3.50 and took 5 minutes to install.. If you really want to change the bezel do a google search on how to do it.. There are plenty of videos which will show you the steps..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
after watching several instructional videos on how to disassemble my s5, i realized its not worth it. they water-proofed the crap out of it with multiple layers of adhesive. using a heat gun to soften the glue is a pain, and can also damage the components.
if you use some kind of very soft heat gun and a "sucker" while sliding in a small credit card, you can do it. it is all about being delicate...
The bad thing to replace the bezel frame is that you have to unmount the whole phone, and at last remove the screen. It's glued to the frame with an adhesive band and it's very difficult to remove it without breaking it. And probably you'll need a new adhesive to mount it again to the frame, otherwise parts of the screen will remain elevated from the bezel.
And it's very easy to break the AMOLED screen connector between the mainboard and the screen if you don't know where it is. First, you'll have to watch several youtube vids to get to know how to disasemble the phone and where the connector is.
And if you dare to replace it and you fail, there're cheap alternatives like this: https://lltrader.com/collections/s5/products/samsung-galaxy-s5-display-assembly-no-frame but it's not an original AMOLED, it's a LCD and very fragile, keep it in mind.