Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
Your best bet for a guide to follow that also has images is on the following link.
https://www.ifixit.com/Device/Samsung_Galaxy_S5
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
No, it isn't if you've never done this before.
Reasons are the next:
1. The risk to damage LCD-assembly is very high.
2. The risk to buy a non-suitable bezel (middle frame, or "rear case" how Samsung calls this part) is very high. They are different for different variants of S5 and contain different main antennas inside gray plastic.
Your best bet is to wait for a crack in the screen. You're also gonna screw up the adhesive around the screen and you could literally break keys underneath (no backlight anymore)
Unless you can pop in a nail and try to lift up the screen yourself... as it happens when device is old.
As of now new Original screen is around 100€, which is one of the best display today.
I'll just stick a case on and be done with it..just get a new charge port cover and that'll do..haha
I just installed a new charger port cover. Cost me $3.50 and took 5 minutes to install.. If you really want to change the bezel do a google search on how to do it.. There are plenty of videos which will show you the steps..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
after watching several instructional videos on how to disassemble my s5, i realized its not worth it. they water-proofed the crap out of it with multiple layers of adhesive. using a heat gun to soften the glue is a pain, and can also damage the components.
if you use some kind of very soft heat gun and a "sucker" while sliding in a small credit card, you can do it. it is all about being delicate...
The bad thing to replace the bezel frame is that you have to unmount the whole phone, and at last remove the screen. It's glued to the frame with an adhesive band and it's very difficult to remove it without breaking it. And probably you'll need a new adhesive to mount it again to the frame, otherwise parts of the screen will remain elevated from the bezel.
And it's very easy to break the AMOLED screen connector between the mainboard and the screen if you don't know where it is. First, you'll have to watch several youtube vids to get to know how to disasemble the phone and where the connector is.
And if you dare to replace it and you fail, there're cheap alternatives like this: https://lltrader.com/collections/s5/products/samsung-galaxy-s5-display-assembly-no-frame but it's not an original AMOLED, it's a LCD and very fragile, keep it in mind.
Related
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Report it broken, pay $90 for a replacement through Asurion. Cheaper than $500, y'know?
Sent from my FroyoEris
You need to google for a eris digitizer.
LMGTFY
http://www.google.com/search?hl=en&...fai=CMBq5koWzTNrsN46EygTEha3rCQAAAKoEBU_Q0wbi
i think u can get them for like 40+ dollars off ebay
If you don't mind the long shipping times, you can get a digitizer + the entire housing together for around $60 on ebay. Doesn't seem like a bad deal to me.
#EDIT#
Zombie post . . . sorry about that. Need to remember to look at dates before replying.
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I just replace mine, and is wasn't too bad. There is videos on YouTube about how to do it. It took me about an hour, and the part costs about 40 bucks. If you need any help with it, feel free to email me [email protected]
Aaron
you can get one @ 49usd
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-g5-eris-p-2727.html
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I'm going through the same thing. Amazon has some digitizers for about $40. I decided to spend the extra $20 and get this instead
http://www.amazon.com/gp/product/B004F5CEDW
It's the whole casing. I didn't want to bother with stripping the digitzer off the frame which is glued on. With replacing the whole body, you just move the mainboard over and plug everything back in. At least this is my hope. I'll post here again when the thing actually arrives. I ordered it two weeks ago and it probably won't be here until mid March.
Good luck with whatever you decided to go with.
UPDATE. hmmm october was the post date. I guess this guy has long taken care of his problem
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
roscuthiii said:
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
Click to expand...
Click to collapse
There's Youtube videos for disassembly. I haven't watched them myself, but I know they exist, so they probably tell you what tools you need there. From what I remember hearing, just some small torx screwdrivers, or maybe some small phillips, too, but don't quote me on those.
Here is a link to the teardown video I followed.
http://www.youtube.com/watch?v=zHwm-32BI0w
The amazon link in my previous post is what I bought. It was the whole body. There are just screen replacements but I didn't want to mess with that because the digitizer is glued to the front piece. I didn't want to risk warping or breaking the front piece and completely screwing myself over. Anyway, what I bought came with the tools you need to perform the teardown and an extra screwdriver that was not needed.
I am glad I did this. However, it came with it's share of issues.
-The very top of my digitizer does not work. As a result, I can't pull down the notification bar. I can get to it through the menu button but it is annoying.
-I had to move the ear speaker and loudspeaker over. They were glued to some foam which was stuck/glued to the chassis. That foam absorbed the vibration. When my phone rings loud it is nasty because the speaker is bouncing around. I tried to cut some foam myself to replace what was stuck in the old case. It helped but it's not perfect.
-There are some rubber buffers? Isolators? Not sure what their called which also needed to be moved over form the old case.
-It took a month to ship to my house. After discovering these issues, I am kind've stuck with them because it would take a month to send the parts back and another month to get a replacement. By then I'll be due for a new phone.
So that's my experience of replacing the whole case.
Let me know if you have anymore questions.
Thanks for sharing your experience!
My pleasure. Glad to help out.
Sent from my Eris using XDA App
To add to this, because I'm sure there are others out there like me who intend to use their Eris until it gets run over, dropped in lava, drawn, quartered, and defecated upon . . .
I ordered the same replacement housing and digitizer as mentioned above, and had 2 small problems:
The housing I got had a nut in it that came loose, so that one of the corners wasn't able to reassemble properly.
There was something different in the new housing that caused the proximity sensor to function incorrectly.
For #1, I just used some super glue to weld the nut into place. This appears to have worked OK, but I fear that the point is weakened now and I will need to be very gentle if I disassemble the phone again.
For #2, The problem was that the housing was allowing bleed through inside the case from the proximity flasher to the light sensor, which caused the sensor to determine that there was something close to it when in fact there wasn't. I placed a small (oh so small) piece of electrical tape into the housing between where the IR flasher and sensor are located, and the problem was resolved.
If presented with the option of purchasing a new digitizer alone, or a new digitizer and housing together, follow groovel76's suggestion; it's well worth the time and money to go with the latter. The hassle of cleaning the old adhesive off of the new housing, and the risks of getting new adhesive in places where you don't want it far outweigh the cost of just getting a housing with adhesive pre-applied. I tried to do just a digitizer first, and ended up with a small amount of super glue (DO NOT RECOMMEND) getting on the new screen and the edge of the housing, as well as a screen that didn't seat properly because I didn't get quite all of the old bits out of the old housing. This resulted in dust getting under the screen and another crack when I attempted to fix what I'd screwed up the first time.
Between the availability of parts and ROMs for this phone, I see it being in my family for a LONG time yet.
Yes! Buy a digitizer online (most come with the tools you need such as the torx screwdrivers, mine did) and search for videos on youtube. That's what I did and it only cost me $37 for the digitizer and about 30 minutes of my time. And it worked perfectly as new when I got it all back together.
Hey, I've done extensive searching on Google and these forums, something that is always left out is ABOUT GLUE.
I had a broken Nexus S screen and I changed my screen on the phone with a new one bought on eBay, the new screen works flawlessly but the OEM screen has a sort of adhesive tape that would make it adhere to the phone frame. And usually, all instructions for removing the screen talks about using some kind of a heat gun to make the glue loose.
Well the problem is that the new screens don't have this adhesive, I was wondering if anyone can suggest a kind of glue that would do the job for attaching the new screen to the phone. Right now as it is, the screen is only held in place to my phone by the wire which connects it to the phone's circuitboard.
on a german forum i've read a users experience... he used regular "super-glue" that you can buy everywhere. the one that makes your fingers stick in like 4-5 seconds.
he put little spots of glue everywhere the screen touches the plastic and quickly pushed the screen onto it. seems legit if you ask me - the screen doesnt weigh that much after all.
http://www.repairsuniverse.com/adhesive-strips-for-touch-screens.html
murfi said:
on a german forum i've read a users experience... he used regular "super-glue" that you can buy everywhere. the one that makes your fingers stick in like 4-5 seconds.
he put little spots of glue everywhere the screen touches the plastic and quickly pushed the screen onto it. seems legit if you ask me - the screen doesnt weigh that much after all.
Click to expand...
Click to collapse
That is ideally what I would really like to do instead of dealing with adhesive strips and then cutting the pieces to fit. I live in Germany now and the electronic store here said you can absolutely not use superglue and suggested instead that I used double-sided tape you buy from a photo store (Doppelseitiges, dünnes Klebeband).
What is the name of this 'super-glue' in Germany?
JoeyZazza said:
That is ideally what I would really like to do instead of dealing with adhesive strips and then cutting the pieces to fit. I live in Germany now and the electronic store here said you can absolutely not use superglue and suggested instead that I used double-sided tape you buy from a photo store (Doppelseitiges, dünnes Klebeband).
What is the name of this 'super-glue' in Germany?
Click to expand...
Click to collapse
Sekundenkleber
What if it broke again? I doubt you would be able to remove it if super glue it's used
Evo_Shift said:
What if it broke again? I doubt you would be able to remove it if super glue it's used
Click to expand...
Click to collapse
You're probably right but if it breaks again I'll just write off the phone as fully depreciated in my head.
Was the replacement one of these:
http://www.ebay.com/itm/All-New-Out...773?pt=LH_DefaultDomain_0&hash=item3a77cd07e5
or was it a full unit that go over $100?
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
Hey guys, I stupidly choose to take the glass panel of the front of my tf101 (it had suffered liquid damage months before, which left white patches all over the screen which i trying to fix) in doing so i shattered the glass panel.:silly:
im really not sure how the whole digitaliser thing works, but im assuming that glass serves no purpose other than a protective surface? if so is it possible to replace that glass panel with a thin piece of plastic, as theres no point spend alot of money on a proper replacement that i will most likely shatter again.... also i now own a tf300t so i cant justiy the price of a replacement (just so i can test the new linux developments)
Cheers
I really wouldn't tbh, if you aren't willing to go for the repair it may be best to sell it or permanently use hdmi-out / a mouse. To quote a post
(Please excuse the... loaded language.)
goodintentions said:
No, it is not possible.
There is a place you can get the glass digitizer, but they require that you buy at least 10 at a time. Furthermore, removing the old glass and putting on a new glass is a very complicated procedure. Gorilla glass is scratch resistant, not pressure failure resistant. You've no idea how thin the glass digitizer is. It's slightly thinner than your credit card. Without the proper experience and the right equipment, the slightest pressure point could crack it.
BTW, I speak from experience. I'm not just another crackhead.
I live near a guy that does electronic repairs for a living. A few months ago, he ordered a whole bunch of these digitizer glass for the transformer. He thought he could make a profit from repairing people's TF's or get the ones with broken glass, repair, then resell for a profit. Funny story about this, actually. So, I managed to get my hands on one of the TF glass digitizer. Spent all night to perform the operation. Almost done when I accidently applied a small pressure. Cracked it. Frustrated, I put it up on ebay. It was immediately bought that same night by the guy I was talking about. That's how I got to know him. He bought it for $200. A couple days later, he put it up on ebay. It turned out he had broken a glass and scratched another. He took it as a sign to get out of that business right away. Later when I got to know a few people who wanted to repair the thing themselves, I sent them his info and let him sell them the rest of his glasses.
The point is we simply don't have the right equipment to do these things. And even when we do, the material cost is just ridiculous, not to mention labor.
It's best that you put yours on ebay and get a new one.
Click to expand...
Click to collapse
He is referring to repairing the digitizer, while yours is fine, the repair has the potential of breaking the digitizer as well. It'd take alot of effort and patience, if you possess this I definitely say go for it though , not to be discouraging, I just warn you to be careful.
As far as getting a replacement part, I'm not sure plastic will work, I searched a bit but couldn't find a definite yey or nay as to whether it will conduct with the digitizer properly, but it may.
You may beable to get a cheap glass replacement as well, but I know the tablet comes with Gorilla glass stock.
Link to thread from quote Here.
Thing O Doom said:
I really wouldn't tbh, if you aren't willing to go for the repair it may be best to sell it or permanently use hdmi-out / a mouse. To quote a post
(Please excuse the... loaded language.)
He is referring to repairing the digitizer, while yours is fine, the repair has the potential of breaking the digitizer as well. It'd take alot of effort and patience, if you possess this I definitely say go for it though , not to be discouraging, I just warn you to be careful.
As far as getting a replacement part, I'm not sure plastic will work, I searched a bit but couldn't find a definite yey or nay as to whether it will conduct with the digitizer properly, but it may.
You may beable to get a cheap glass replacement as well, but I know the tablet comes with Gorilla glass stock.
Link to thread from quote Here.
Click to expand...
Click to collapse
Thanks for the reply man, I'm actually typing this off it now turns out where it shattered it didn't really hit the screen mostly stayed over the black out line, with a few hairline cracks but still usable I just taped up the worst of it then chucked an screen protector over it, gonna just use it for HDMI output mostly