Database Info

need the stock firmware for my sgh-t959v

i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.

super buuuuump!!!

bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?

so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!

welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday

yes, i need it too.

Same problem, anyway know where download this firmware???

No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

[Q] need files to restore samsung t959vuvkg4

Hi,
I'm new to this,
I recently bricked my phone by rooting and unistalling all of the bloat apps that were hogging memory, I guess I got carried away. Should have stopped once the phone worked normally. My question is where can I find and download the PDA, PIT CSC and PHONE files needed on odin to restore my phone. It seems like all the liknks I've tried are broken. Can I install a an earlier version or something that will work on this phone or do I need to use a specific setup? can I install Cyanmod using odin?
Thanks in advance,
any advice helps
Al

a_saladbar said:
Hi,
I'm new to this,
I recently bricked my phone by rooting and unistalling all of the bloat apps that were hogging memory, I guess I got carried away. Should have stopped once the phone worked normally. My question is where can I find and download the PDA, PIT CSC and PHONE files needed on odin to restore my phone. It seems like all the liknks I've tried are broken. Can I install a an earlier version or something that will work on this phone or do I need to use a specific setup? can I install Cyanmod using odin?
Thanks in advance,
any advice helps
Al
Click to expand...
Click to collapse
on google, you type.
Samsung <device name> Android development.
You will get XDA link, there you will find all files needed, Odin and its process..
Choose, package with wipe scripts.
Best of luck.

What have I done??

Hi, after a weekend of messing with my phone I managed to delete all my files
Plus all my backup files I have no recovery backup that's gone too, all root access has
Been Lost odin won't work supersu is asking for Binery files and won't work, I do have the latest Twerp Installed however I've got nothing to install with it and no recovery backup to install, odin won't open it says unexpected partition layout. I have a Samsung galaxy s3 GT-I9300, OH I can no longer connect to my Internet at home. Here's some more info don't know if it will help anyone who can help me.
WI-FIMAC ADDRESS 88:32:9B:63:5F:A8
SERIAL NUMBER 4df7298605262179
BASEBAND VERSION 19300XXUGMK6
KERNAL VERSION 3.0.31-2168382
BUILD NUMBER JSSISJ. 19300XXUGMK6
Any help, any ideas will be greatly appreciated
Thanks. Matt...... Newbe

delete dup post

mwelf74 said:
Hi, after a weekend of messing with my phone I managed to delete all my files
Plus all my backup files I have no recovery backup that's gone too, all root access has
Been Lost odin won't work supersu is asking for Binery files and won't work, I do have the latest Twerp Installed however I've got nothing to install with it and no recovery backup to install, odin won't open it says unexpected partition layout. I have a Samsung galaxy s3 GT-I9300, OH I can no longer connect to my Internet at home. Here's some more info don't know if it will help anyone who can help me.
WI-FIMAC ADDRESS 88:32:9B:63:5F:A8
SERIAL NUMBER 4df7298605262179
BASEBAND VERSION 19300XXUGMK6
KERNAL VERSION 3.0.31-2168382
BUILD NUMBER JSSISJ. 19300XXUGMK6
Any help, any ideas will be greatly appreciated
Thanks. Matt...... Newbe
Click to expand...
Click to collapse
try using a pit file with odin. im thinking it wouldnt have an error if you had the pit file.
to answer your question "what have i done?" it would seem, you changed things you didnt understand and didnt realize the consequences, resulting in a big @SS mess
dont do that

Like I said odin won't work because of unexpected partition layout.
I'm fully aware of the consequences however I will be the recipient
Of a Samsung galaxy note 4 next week so I was just experimenting
And I will definitely not be rooting that

mwelf74 said:
Like I said odin won't work because of unexpected partition layout.
I'm fully aware of the consequences however I will be the recipient
Of a Samsung galaxy note 4 next week so I was just experimenting
And I will definitely not be rooting that
Click to expand...
Click to collapse
ill just assume you dont know what a pit file is, and ill move on. good luck!

No need to assume, I'll be honest I've no idea what a pit file is or how to use one
Etc etc, however I'd be interested to learn if you can give me the basics, everybody has to start somewhere and the only way to progress is if people share the knowledge,
So what do you know that can help me??

mwelf74 said:
No need to assume, I'll be honest I've no idea what a pit file is or how to use one
Etc etc, however I'd be interested to learn if you can give me the basics, everybody has to start somewhere and the only way to progress is if people share the knowledge,
So what do you know that can help me??
Click to expand...
Click to collapse
go to your devices forum where the return to stock post is, and see if there is a pit file for whatever version you have. if not, try a search for pit over your general and q&a forums. im sure you will find some, just need to match them to the stock files.
on odin, there is a pit box, check it and link your pit file.

I'd just like to let you know I have managed to sort my phone out
I got a clockwork mod ,and now I'm using something called CyanogenMod
I'm not quite sure how I have managed to achieve this but I have my WiFi connected
to my phone again, Odin is installed and working with no unexpected partition layout
Problems, however my SD card won't mount and I can't seem to get Google playstore
But for now its a small price to pay considering where I was this afternoon. I think I've done well

Custom Rom

Any one who has a custom rom for samsung sm_920r4? please help.............

Help with? You need to be more specific for the experienced community to help!
Sent from my SM-G920F using Tapatalk

jr866gooner said:
Help with? You need to be more specific for the experienced community to help!
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
ok, Thanks for the replay. To be specific I need a custom rom for my samsung (SM-G920R4) because I need to flush using Twrp 2.8.7.0 but I could not find a custom rom for my specific rom. What happened was my I just bought my phone from a dude who I met on sell and buy viber group here in Ethiopia (big mistake I know) and it worked fine for a day or so and then I logged my google account. After that my phone run out of battery so I plugged it and turn my phone on and when I did this I got frp locked it just bootloops showing me "custom binary blocked by frp lock". I took it to some phone fix guy and he managed to turn the frp lock off but it need to be flush he and also I tried to flush it using stock firmware with odin but that didn't work so I saw on xda thread that some guy was able to fix the same issue as me by using custom rom here is the link to that thread : http://forum.xda-developers.com/galaxy-s6/help/help-sw-rev-check-fail-device-3-binary-2-t3218678
But, I could not find a custom rom for my samsung model number SM-G920R4 us cellular, So I am begging this community of developers to save my phone if they have a custom rom for my model number? I am student and I can't offered to buy a new phone. Please help. Thanks for taking the time and reading this.

No problem. This should be perfect for a development member to pick up and assist.
Sent from my SM-G920F using Tapatalk

bump. I mean, help? Same issue.

If the issue is you need a custom rom for that variant the op has then unfortunately you're out of luck, no one develops for that variant sadly.

Samsung Galaxy S6 Phone Boot Issue
Hi,
I'm new to XDA developers and pretty much a noob in Android related stuff, I have a Samsung Galaxy S6 with TWRP installed. Last week it went into a bootloop or something and wouldn't go past the "Samsung" screen. I wiped the caches but it didn't work, did a Factory reset but no good either, then used ODIN to install a Custom ROM in it but ODIN gave errors and that didn't work either. Basically, there was an error displayed in TWRP "No OS Installed. Are you sure you want to reboot?" I tried solving this following a Youtube tutorial. The guy flashed a Cyanogenmod in his phone using TWRP, I tried doing the same but TWRP gave an error " could not find meta-inf/com/google/android/update-binary in the ZIP file" . I extracted that file on my PC and it had only an md5 file in it"
Well I've been searching the internet a lot but haven't been able to find any S6 (920-F) Custom ROM which has a ZIP file that contains The META-INF folder (I'm not sure what it does) but I'll be really grateful if someone sends me a download link for it.
Or if there's some other solution for a problem then please help me out.
Thanks