Database Info

need the stock firmware for my sgh-t959v

i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.

super buuuuump!!!

bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?

so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!

welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday

yes, i need it too.

Same problem, anyway know where download this firmware???

No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.

[Q] samsung galaxy player 50

My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...

Darius, I'm stuck with a brick galaxy player. I can try to flash with a galaxy 3 firmware if you want
Do you know how to make a dump of your device so you can share with me the original firmware?
http://forum.xda-developers.com/showthread.php?p=14493414

I don't know...but I'll try to find

Thanks!
I tried the firmware of galaxy 3, but didn't work

I dont think that its possible, first of all, despite being an android device, it doesnt have radio features, gsm 3g etc, only wifi, there are features that our phone does not support

Anyone found a solution for this yet? Not being able to test this device to it's full potential is really frustrating. Games are laggy and apps just do not run smooth on this one.
Has anyone tried z4root on this? I did and it freezes at "acquiring root shell".
@fedeff: how did you brick it?

Darius_AWS said:
My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...
Click to expand...
Click to collapse
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.

arunmcops said:
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.
Click to expand...
Click to collapse
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?

anon3524 said:
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?
Click to expand...
Click to collapse
factoryfs.rfs is ur firmware backup....

@arunmcops: Thanks for the instructions. If someone try this and upload it'd be great for me.
@anon3524: I accidentally reseted the device to factory, trying to fix a problem with wifi (it suddenly stopped working one day).

arunmcops said:
factoryfs.rfs is ur firmware backup....
Click to expand...
Click to collapse
Ok, I am down to do this process you just explained as long as you or anyone explains to me how to recover the device with this "factoryfs.rfs" in case it gets bricked. You'd have to explain with detail how to grab this file and what to do with it etc. Also, if you could give further details on the initial process, that'd be great since a few things are unclear (to a brave noob like me).
Other than that, I am willing to try it to see the results.
BRING IT OON! *warface*

@arunmcops - I've got one of these, so have uploaded the file you wanted here - sorry, not allowed to post links yet:
dl.dropbox.com/u/6491656/Samsung/factoryfs.tar.gz (please don't flash this, its not a full rom)
I haven't made any changes to the base firmware other than renaming a couple of the phone.apk's to .old (cell standby was eating battery, and this device doesn't have a sim).
For fun, i've also uploaded a dmesg log
dl.dropbox.com/u/6491656/Samsung/dmesg.log
One other thing, i think the partition layout might be slightly different on this (might be wrong, don't have the phone) in that the internal sd card is mounted as /sdcard and the external one is /sdcard/sd.
Hope this helps!
Chris

@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?

fedeff said:
@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?
Click to expand...
Click to collapse
Hi...thats probably because it isn't intended as a flashable rom. Its just a dump of the stock firmware so that arunmcops asked to see to see if it had any resemblance of the galaxy 3 f/w, to see what we'd have to do to get a working custom ROM on this device..
Please don't attack it with any kind of Norse God ...especially until there is a confirmed route back to stock. All thats contained in the files is what you have on your device already - so there is also absolutely no point (for now).
If your having trouble with your device now, you could try doing a factory reset or playing about in Kies - i've fixed my device once after I got curious and flashed a custom ROM on here (which fyi completely messed it up - something like E:multi_csc: error: open /efs/imei/mps_code.dat because we dont have an IMEI code on this device) and then got it back working again - unfortunately i can't remember exactly what I did. Otherwise if this doesn't work I'll see if i can make a working stock package for Odin.

@ctaylr, yes I'm having problems with my device. It got soft bricked. I couldn't make it work using Kies. The only thing I can do is to start it in Download mode. If you can make a working package for oding that'd be great
This might help
http://forum.xda-developers.com/showpost.php?p=9515709&postcount=14
Thanks!

@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks

ctaylr said:
@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks
Click to expand...
Click to collapse
1) I have the 8gb version
2) By doing "wipe data/factory reset" is how I got it soft bricked. (the device wifi suddenly stopped working, and I thought that would help) After that it kept entering in the recovery mode. Then I tried to flash it with odin, now the only thing I can do is enter the download mode
Thanks again for helping me!

News?
Hi! I also like the others I am interested because my Galaxy player has 50 brick and I need someone to do dump the firmware so I can flash through odin! Please would you be my salvation and many other who have this player and would like to fix without waiting for the assistance of a month
Waiting for an answer I greet and thank all users who want to help me
sorry if English is not correct, but I'm using google translator (I'm Italian)
EDIT:
listen to me: http://forum.xda-developers.com/showthread.php?t=726673 This is the guide on how to get the dump of your fimrware if someone kindly did this process with its galaxy player 50 and then upload the file . tar obtained would help all

I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.

ctaylr said:
I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.
Click to expand...
Click to collapse
ok then I'm sorry I read the topic in a hurry and did not realize that you can not do what I say but re-reading now I understand!
ctaylr what do you advise me to do then? wanted to try an get into recovery and restore but I think the 3 keys are disabled enters only download ..
Google traductor sorry

HELP PLEASE... GALAXY TAB P6200 Softbrick

Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:

userpjay said:
Anyone there who could help... I've been get hype when i receive my first android device (galaxy tab P6200) so i search for tutorial on how to root and flash new firmawre.. i did everything in the tutorial but suddenly.. odin has stop working. when i boot my P6200 it turns out to be softbrick.. sorry i'am kinda new on android scene i've been on ios scene before o didn't think it would be harder to find a solution on android... ive spent 2 straight days finding downloading firmware ive even search xda for this matter but no luck... i can still access download mode but odin and Heimdall still give me such error that prevents me to fix my device... i'am kinda losing hope so i try to post here to see if its still a chance for me to recover my softbrick device... hope someone could help... insanely beggin....:crying:
Click to expand...
Click to collapse
Need more info, exact model number firmware you were on, firmware file you were tryimg to flash, did you check, or uncheck anything in Odin? Download mode is good, you should be OK.
How do you know its softbrick? Bootloop, hang at logo? Which one?, as much data as possible will get you fixed faster.

I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.

nabile said:
I had same problem. You need a PIT file for p6200 and use it in odin together with the newest firmware from sammobile.com.
It works for me.
Click to expand...
Click to collapse
I have limited knowledge on flashing, but as far as I know, If u r using a 'PIT' file, be sure to check on 'Repartition' Option in Odin (while flashing). If u Flash wid ONLY a md5 file, ensure that 'Re Partition' box is unchecked while flashing. May be u kept Repartition checked while you were not using a PIT file or vice versa.
If that is d case, try flashing again by following a correct process.

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

Bricked S6 please help

Hi guys
recently bought a s6 from ebay which was frozen on S6 logo. Basically managed to clear cache and factory reset from recovery but that didn't work, anyway I DL the O2 firmware and odin and put it into download mode I get a fail on odin when trying to install the rom
The phone has knox 1 and also has red writing SW Rev. Check Fail. Device: 3 Binary: 1.
I'm unsure what to do and if theres any chance for me to recover.
Many thanks
Mav

it failed because you flashed an incompatible Firmware.
where did it stopped flashing in odin? In sboot.bin?
If thats the case, you need to download proper firmware/country for your device.
Let me know what country is ur fone made of.

Hi thanks for your reply.
I managed to get it working by installing root and unikernel, it boots into O2 the firmwarw is 5.1.1
Only problem now is imei is 3500000000006
And it wont make calls dont know if imei is corrupt ir they sold me a stolen or lost phone?
I may install tw recovery and custom rom and see if that works.
Any suggestions?

Hi
Ive managed to sort out and get it to work infact typing on it now. Its currently rooted custom rom and twrp. I e managed also to restore original imei number so overall im quite pleased with myslef lol.
Anyway one last problem i have is ive tried all sims but none work i know ita picking up signal as the bar shows top right. Also chexk my settings.
Ive tried automatically and manually going to register networks but it says unable to connect try again later. I know uts not my area as my wifes s6 works perfectly. Sim also def works. The phone also picks up when a new sim has been inserted so i dont think its sim slot.
Any ideas guys

OK new update if anyone can help I'd really appreciate.
Installed new vador rom Imei reverted back and serial number is all zeros
Is this something to do with baseband if so how can I fix read somewhere about ariza patch but that was s3 4 etc.
Thanks
Mav

1. Your EFS is corrupted. The IMEI you see is a generic one, phone will be useless for network provider only wifi will work.
2. The one thing that caused this is by flashing an old bootloader to your phone. Thats why youve encountered Check Fail error on Download mode.
Happened to me also but got it fixed in the end.

OK thanks for the info how do I fix? I do have my wife's s6 but that's not rooted and don't want to root can I restore the efs
Many thanks
Mav

Been searching for ages can anyone please point me in the right direction for a fast download of stock o2 5.1 rom? I believe I may need this one G920F_O2U_G920FXXU2BOGC_G920FTEF2BOG1.zip at the moment rapid gator is going to take 10 hours lol.
Thanks
BTW is anyone out there on the s6 forums hardly getting any help really want to try and sort this thanks

maverick7777 said:
Been searching for ages can anyone please point me in the right direction for a fast download of stock o2 5.1 rom? I believe I may need this one G920F_O2U_G920FXXU2BOGC_G920FTEF2BOG1.zip at the moment rapid gator is going to take 10 hours lol.
Thanks
BTW is anyone out there on the s6 forums hardly getting any help really want to try and sort this thanks
Click to expand...
Click to collapse
I think I know one thread that has a firmware downloader with ultra fast download speed you may try searching it.
I dont know if it will help, but you may be able to successfully flash the firmware but many of those who have problems were unable to boot the phone due to corrupted efs data.
Here's my way of fixing it (if you still have intact efs). http://forum.xda-developers.com/showpost.php?p=63693480&postcount=28
But if its already wiped, there's no way you can retrieve it unless bringing it to samsung or any repair shop.
Anyways, mine was fixed (IMEI) using Octopus box repair tool. Since I cant do anything to recover my generic imei.

batuzai04123 said:
I think I know one thread that has a firmware downloader with ultra fast download speed you may try searching it.
I dont know if it will help, but you may be able to successfully flash the firmware but many of those who have problems were unable to boot the phone due to corrupted efs data.
Here's my way of fixing it (if you still have intact efs). http://forum.xda-developers.com/showpost.php?p=63693480&postcount=28
But if its already wiped, there's no way you can retrieve it unless bringing it to samsung or any repair shop.
Anyways, mine was fixed (IMEI) using Octopus box repair tool. Since I cant do anything to recover my generic imei.
Click to expand...
Click to collapse
Thanks silly question but how do I know if my efs is ok or corrupted?
at the moment the phone works perfect it is rooted, twrp recovery and vador rom but it just wont connect to networks. I know its not stolen or lost.

maverick7777 said:
Been searching for ages can anyone please point me in the right direction for a fast download of stock o2 5.1 rom? I believe I may need this one G920F_O2U_G920FXXU2BOGC_G920FTEF2BOG1.zip at the moment rapid gator is going to take 10 hours lol.
Thanks
BTW is anyone out there on the s6 forums hardly getting any help really want to try and sort this thanks
Click to expand...
Click to collapse
As far as i know if your EFS partition is corrupt and you do not have a back up of the EFS partition to restore which you probably dont as you bought this as broken then sim capability is dead, im not sure of any other way to fix this unless you have the intact efs partition

Hi
How can I tell if the efs is corrupt it shows a baseband it now shows the correct ime I
It just won't connect to network it says try again.
I can post a screen print of efs folder on es Explorer if anyone knows what it should look like

Here are screen prints but I think I'm speaking to myself lol

Hi there i spent months on fixing issues like this (i now have a tool that takes care of all this) , best thing you can do is flash to a rom where the original imei came back do a backup of the efs, flash to a orginal rom ( latest rom) make sure its the right one for your device, connect to kies, install the rom again root and restore the efs failing that the imei is blocked use checkmend.com the uk version if your from the uk, message me if you need help

maverick7777 said:
Thanks silly question but how do I know if my efs is ok or corrupted?
at the moment the phone works perfect it is rooted, twrp recovery and vador rom but it just wont connect to networks. I know its not stolen or lost.
Click to expand...
Click to collapse
Your rom, recovery and kernel doesnt have to do with corrupted efs.
Only way is to bring it to repair service using box tools to re enter/validate your imei so that you can connect to your network provider. There is no other way around other than retrieving your efs and installing it or thru repair service.
You may now relax yourself at finding ways to connect, I assure it wont help trying to flash and flash and flash stuff to your phone.
---------- Post added at 08:46 AM ---------- Previous post was at 08:37 AM ----------
Uhm can you send sms or make calls? It seems you have a valid Imei

Ok ive tried all stock roms including o2 and a uk btu one but no luck they all do the same thing get frozen on Samsung logo then I flash unikernel and it boots.
When checking my efs folder I can see no modem file I'm now wondering could that be the fault? so I downloaded modem and BL for 5.02 and 5.11 both will not flash via odin I get a fail message and on device check fail device: 3 binary: 1 messgage in red?????.
So I'm a little lost, I was wondering if I managed to root my wifes s6 which is virtually new could I back up her efs folder then copy it into mine and just amend the imei to my original would that work? also is there a way of rooting my wifes phone without triggering knox?
Any other suggestions guys I really don't know what bootloader was on it to start with or rom is there any way for me to find this out?, also another weird thing when the o2 uk roms install they install german apps?
Thanks guys

Ive repaired EFS Partitions with scripts downloaded from links at xda.
For example i trashed my EFS partition on my note 3 so it caused hard reboots after android booted up and it couldnt be fixed with anything else than the EFS partition repair scripts.
Edit: friend repaired his Note 4 also.

Thanks but where can I find these scripts as I've looked everywhere and if I did find how do I go about doing it. At the moment when I try to flash modem and bootloader it fails.

EFS brick
maverick7777 said:
Thanks but where can I find these scripts as I've looked everywhere and if I did find how do I go about doing it. At the moment when I try to flash modem and bootloader it fails.
Click to expand...
Click to collapse
hi my friend,
i have exactly the same issue as u, i'm really hopeless, did you get any solution so far??????????????????????????
i hate being using my s6 as an ipad mini, holding two phones in my pockets

ketman5001 said:
hi my friend,
i have exactly the same issue as u, i'm really hopeless, did you get any solution so far??????????????????????????
i hate being using my s6 as an ipad mini, holding two phones in my pockets
Click to expand...
Click to collapse
Same with me also need help