Database Info

[Q] samsung galaxy player 50

My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...

Darius, I'm stuck with a brick galaxy player. I can try to flash with a galaxy 3 firmware if you want
Do you know how to make a dump of your device so you can share with me the original firmware?
http://forum.xda-developers.com/showthread.php?p=14493414

I don't know...but I'll try to find

Thanks!
I tried the firmware of galaxy 3, but didn't work

I dont think that its possible, first of all, despite being an android device, it doesnt have radio features, gsm 3g etc, only wifi, there are features that our phone does not support

Anyone found a solution for this yet? Not being able to test this device to it's full potential is really frustrating. Games are laggy and apps just do not run smooth on this one.
Has anyone tried z4root on this? I did and it freezes at "acquiring root shell".
@fedeff: how did you brick it?

Darius_AWS said:
My sister have a Galaxy Player 50 with eclair...this PMP seems to be the same as the galaxy 3 (same resolution...and some other things) so can I flash lestatious or other rom on it ?
This hardware is not a phone...but maybe ?
Maybe I can try to flash...but if the pmp become soft bricked...it's over since i can't found an galaxy's 50 firmware...
Click to expand...
Click to collapse
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.

arunmcops said:
First root using One click root.
Give these commands in Terminal emulator
su
mount
Check for system partition.Suppose it is stlx (x=6,7,8 etc depending on system partition)
give this command to dump system...
dd if=/dev/block/stlx of=/sdcard/factoryfs.rfs
Copy it from sdcard and upload. I need to check it then i can help u out.
Click to expand...
Click to collapse
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?

anon3524 said:
I'd gladly try it as long as Samsung gives me firmware, don't want to end up with a nice looking little brick here.
Is there any way that that an installer/firmware file could be saved in the device for backup purposes or something?
Click to expand...
Click to collapse
factoryfs.rfs is ur firmware backup....

@arunmcops: Thanks for the instructions. If someone try this and upload it'd be great for me.
@anon3524: I accidentally reseted the device to factory, trying to fix a problem with wifi (it suddenly stopped working one day).

arunmcops said:
factoryfs.rfs is ur firmware backup....
Click to expand...
Click to collapse
Ok, I am down to do this process you just explained as long as you or anyone explains to me how to recover the device with this "factoryfs.rfs" in case it gets bricked. You'd have to explain with detail how to grab this file and what to do with it etc. Also, if you could give further details on the initial process, that'd be great since a few things are unclear (to a brave noob like me).
Other than that, I am willing to try it to see the results.
BRING IT OON! *warface*

@arunmcops - I've got one of these, so have uploaded the file you wanted here - sorry, not allowed to post links yet:
dl.dropbox.com/u/6491656/Samsung/factoryfs.tar.gz (please don't flash this, its not a full rom)
I haven't made any changes to the base firmware other than renaming a couple of the phone.apk's to .old (cell standby was eating battery, and this device doesn't have a sim).
For fun, i've also uploaded a dmesg log
dl.dropbox.com/u/6491656/Samsung/dmesg.log
One other thing, i think the partition layout might be slightly different on this (might be wrong, don't have the phone) in that the internal sd card is mounted as /sdcard and the external one is /sdcard/sd.
Hope this helps!
Chris

@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?

fedeff said:
@ctaylr Thanks for uploading the file.
I tried to load it using Odin, but it get stuck while uploading the file. The device is detected, but I think it's not transfering anything.
Is it possible to restore it form sd card?
Click to expand...
Click to collapse
Hi...thats probably because it isn't intended as a flashable rom. Its just a dump of the stock firmware so that arunmcops asked to see to see if it had any resemblance of the galaxy 3 f/w, to see what we'd have to do to get a working custom ROM on this device..
Please don't attack it with any kind of Norse God ...especially until there is a confirmed route back to stock. All thats contained in the files is what you have on your device already - so there is also absolutely no point (for now).
If your having trouble with your device now, you could try doing a factory reset or playing about in Kies - i've fixed my device once after I got curious and flashed a custom ROM on here (which fyi completely messed it up - something like E:multi_csc: error: open /efs/imei/mps_code.dat because we dont have an IMEI code on this device) and then got it back working again - unfortunately i can't remember exactly what I did. Otherwise if this doesn't work I'll see if i can make a working stock package for Odin.

@ctaylr, yes I'm having problems with my device. It got soft bricked. I couldn't make it work using Kies. The only thing I can do is to start it in Download mode. If you can make a working package for oding that'd be great
This might help
http://forum.xda-developers.com/showpost.php?p=9515709&postcount=14
Thanks!

@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks

ctaylr said:
@fedeff Ok. i'll have a look over the weekend and see if i can make something that flashes.
Quick questions
1) do you have the 8gb or 16gb version?
2) have you tried going into recovery utils and doing a "wipe data/factory reset?" - you can do this by holding down home, volume down and volume up while turning the unit on - i seem to remember this fixed it for me, but it probably depends on how far Odin got while flashing. If your unit is already bricked, i can't see it doing much further harm
Thks
Click to expand...
Click to collapse
1) I have the 8gb version
2) By doing "wipe data/factory reset" is how I got it soft bricked. (the device wifi suddenly stopped working, and I thought that would help) After that it kept entering in the recovery mode. Then I tried to flash it with odin, now the only thing I can do is enter the download mode
Thanks again for helping me!

News?
Hi! I also like the others I am interested because my Galaxy player has 50 brick and I need someone to do dump the firmware so I can flash through odin! Please would you be my salvation and many other who have this player and would like to fix without waiting for the assistance of a month
Waiting for an answer I greet and thank all users who want to help me
sorry if English is not correct, but I'm using google translator (I'm Italian)
EDIT:
listen to me: http://forum.xda-developers.com/showthread.php?t=726673 This is the guide on how to get the dump of your fimrware if someone kindly did this process with its galaxy player 50 and then upload the file . tar obtained would help all

I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.

ctaylr said:
I don't think it is as simple as that.
If you fully read that topic above, it tells you. That will ONLY tarball the files in the /system folder. It doesn't dump the the bootloaders, efs or produce the initrd, which is also part of the firmware.
In fact that backup is exactly what i linked to earlier here, and doesn't flash properly through Odin. I don't know Odin very well (i use a ZTE Blade and clockworkmod normally ) but i'm going to take an educated guess it needs all of this information to successfully flash the player, and trying to flash without all of that probably won't work so well.
If i'm wrong, please let me know and i'll do what i can to help.
Click to expand...
Click to collapse
ok then I'm sorry I read the topic in a hurry and did not realize that you can not do what I say but re-reading now I understand!
ctaylr what do you advise me to do then? wanted to try an get into recovery and restore but I think the 3 keys are disabled enters only download ..
Google traductor sorry

[Q] Indipad 10" Unblock or ROM

Hi, just recently some student tablets started to drop in my shop with problems, the latest one was an Indipad 10" made by LGS Caribbean, that is ALL the info I know about it since there are no labels anywhere in the tablet or the box, my guess is a generic Chinese re-branded tablet and it looks like is running ICS 4.0.1 but can't be sure since is locked with a number password. The client brought the tablet in cause her child was playing with it and activated the password screen lock and of course the child doesn't remember what he typed in. :silly:
I'm either looking to unlock the tablet, factory reset it or re-flash stock rom.
I already tried using the volume +/-/power combo for the recovery but it takes me to the android boot error screen, so I guess it has no recovery installed or it was deleted on purpose by the company. Also tried entering a lot of failed passcodes to see if it brings the account recovery option, but is a no go.
Did a Google search to see if I could also find a rom to flash on it but since I'm limited on the info about it nothing has come up.
Many thanks for any help.

No one?

Same thing right here. But i can tell you it is running android 4.0.4, and the build number is: crane_m1003h6-eng 4.0.4 IMM76D 20120921. Of course as you may know the 20120921 is the date so my guess is that it depends on how many updates those tablets have received already. Anyway, the recovery works, cus i have one in here working and you can access recovery from inside android(when you go to factory reset it gives you an option to do so, i did and it works perfect). But again just like you said, It wont work using hardware buttons. I was trying to find someone who can contact me from LGS Carribean but no luck at all. Just nothing, i have a working INDIPAD at this moment and thats how im telling you whats the firmware version and build. Like you said on your post, its an issue dealing with generic tablets it really is. I have not found even a similar enough firmware for the tablet to flash, but i can confirn you can use LiveSuitPack to flash them. Only issue is that i havent found a firmware to do so lol.... And ive look just about everywhere. Im going to run USB deview to check what the real hardware is and brand, if im able to find something ill let you know M8

Many thanks, client called in today and told her I'm still looking for a solution. Will wait for what you find.

Did you get this resolved?

Not yet, @home atm, so I'll check tomorrow for an update.

Seems we still on the black

Yes we are, so far i can tell you the processor is an A10, so its an A10 device. It shows as T10a for manufacturer, but so far thats all i can tell you. There might be a way to pull the firmware image from a working Indipad so that we have something to flash on the password protected ones. But for now, we are all waiting on something

Have same issue
enelyam said:
Yes we are, so far i can tell you the processor is an A10, so its an A10 device. It shows as T10a for manufacturer, but so far thats all i can tell you. There might be a way to pull the firmware image from a working Indipad so that we have something to flash on the password protected ones. But for now, we are all waiting on something
Click to expand...
Click to collapse
My mother-in-law is an English teacher and has several students with the same issue with a password they forgot or they locked the tablet on accident. I haven't been able to factory reset, but when you mentioned T10a, a quick Google search led me to show that EKEN makes T10a tablets.
I hope I'm not leading you down a rabbit trail, but here is their support site with manuals and firmware downloads
Also, searching on XDA apparently there is a way to get CWM on the EKEN T10a and instructions to flash to their latest ROM.
I haven't had a lot of experience with flashing ROMs, but I have flashed my personal devices before. So please let me know if this is possible in any way. I wouldn't want to mess something up. Well, I hope this helps.

mofongoloco said:
My mother-in-law is an English teacher and has several students with the same issue with a password they forgot or they locked the tablet on accident. I haven't been able to factory reset, but when you mentioned T10a, a quick Google search led me to show that EKEN makes T10a tablets.
I hope I'm not leading you down a rabbit trail, but here is their support site with manuals and firmware downloads
Also, searching on XDA apparently there is a way to get CWM on the EKEN T10a and instructions to flash to their latest ROM.
I haven't had a lot of experience with flashing ROMs, but I have flashed my personal devices before. So please let me know if this is possible in any way. I wouldn't want to mess something up. Well, I hope this helps.
Click to expand...
Click to collapse
Sweet, I'll do a hardware comparison tomorrow with EKEN T10a and see if they are identical devices (at least from the outside), if they match I'll just try that. The device is a brick atm so it doesn't matter trying to experiment with it.

mofongoloco said:
My mother-in-law is an English teacher and has several students with the same issue with a password they forgot or they locked the tablet on accident. I haven't been able to factory reset, but when you mentioned T10a, a quick Google search led me to show that EKEN makes T10a tablets.
I hope I'm not leading you down a rabbit trail, but here is their support site with manuals and firmware downloads
Also, searching on XDA apparently there is a way to get CWM on the EKEN T10a and instructions to flash to their latest ROM.
I haven't had a lot of experience with flashing ROMs, but I have flashed my personal devices before. So please let me know if this is possible in any way. I wouldn't want to mess something up. Well, I hope this helps.
Click to expand...
Click to collapse
OMG!!! IT WORKED!!!
Downloaded the T10A Firmware from the EKEN site, followed the steps and now the tablet is up and running perfectly!!! :victory:
Many thanks for your detective work

Omegadrive said:
OMG!!! IT WORKED!!!
Downloaded the T10A Firmware from the EKEN site, followed the steps and now the tablet is up and running perfectly!!! :victory:
Many thanks for your detective work
Click to expand...
Click to collapse
Awesome! I'm so glad I was able to help. I will go ahead and get mine done.

Its funny, but i have that firmware on my computer. Didnt even know why before this post. Now that i see your posts i realize i have flashed those tablet before using Eken firmwares lol.... Thanks a lot guys

What firmware worked for you? Im asking because i downloaded one of them and when i try to turn the tablet on it will keep booting up and wont flash the new firmware.

enelyam said:
What firmware worked for you? Im asking because i downloaded one of them and when i try to turn the tablet on it will keep booting up and wont flash the new firmware.
Click to expand...
Click to collapse
The one for T10A, version "T10 G-SENSOR6225".
I also had a bit of a problem at first trying to boot it into flash mode, but what I did was go to the device manager in Windows and saw that there where 2 copies of the special driver that the "LiveSuitPack_version_1.09_20111101.exe" installs, one with the checkmark like they said, the other I assumed was the tablet connected, so I deleted the one with checkmark and tried again, this time it went through and started the flashing process which took less than 2 minutes.
Straight after attaching the cable, and whilst still holding down the volume+ button, start pressing the tablet power button repeatedly. This (slightly frenzied) procedure puts the tablet into update mode.
Click to expand...
Click to collapse
That was the tricky part, to make it boot into flash mode, it has to be fast between connecting and starting to press the buttons, I took like a 1 second delay between the two things.
Also, got to point out I didn't do the CWM or the root mod, just did the firmware flash cause that's what the client wanted.

Its allright buddy, and thanks. Thing is that i was trying to update it as it said on the Ekken website. But the tablet didnt accept the SdCard update at all. I told you it should be done using LiveSuit and yet i was afraid of bricking the device using LiveSuit ha ha.... Thanks a lot guys, case solved. It took all of us to do so but hey, we made it!!!!

Hi, i have same indiPAD only camera front, i tried flash another rom EkenT10-6225-20120815.rar but touch not work good, works inverted and camera not work.
Im trying download firmware from server eken but very slow, can you shared anoter server please?
thanks

Pulian said:
Hi, i have same indiPAD only camera front, i tried flash another rom EkenT10-6225-20120815.rar but touch not work good, works inverted and camera not work.
Im trying download firmware from server eken but very slow, can you shared anoter server please?
thanks
Click to expand...
Click to collapse
Their server is kinda slow but I use Free Download Manager to download big files and speed up the download.
Also remember this was an experiment and it worked by chance, so no guarantee that it will for every indiPad out there, specially if the manufacturer changes the hardware, you should check the hardware info on the tablet just to make sure we are talking about the same tablet model or you could brick your device.

thanks bro, i know about rom experimental, i think same tablet from Puerto Rico, indiPAD, same eken t10a.
Can you tell me please what file worked on your tablet? i see some files
sun4i_crane_m1003h6-t10a-mc32x0-20121012.rar 274256 KB
t10.rar 200563 KB
t10_2axis_6225.rar 208067 KB
t10_3axis_7660.rar 208078 KB
t10a-mc32x0-20121012.rar 274256 KB
And maybe possible did backup rom from working tablet too. If you can and have one piece we can dump rom.

Pulian said:
thanks bro, i know about rom experimental, i think same tablet from Puerto Rico, indiPAD, same eken t10a.
Can you tell me please what file worked on your tablet? i see some files
sun4i_crane_m1003h6-t10a-mc32x0-20121012.rar 274256 KB
t10.rar 200563 KB
t10_2axis_6225.rar 208067 KB
t10_3axis_7660.rar 208078 KB
t10a-mc32x0-20121012.rar 274256 KB
And maybe possible did backup rom from working tablet too. If you can and have one piece we can dump rom.
Click to expand...
Click to collapse
t10_2axis_6225.rar is the one I used.
The only working tablet I had was the one flashed, the client already picked it up yesterday, so sorry.

Touchscreen not working after root, but S-Pen works fine

I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
Thanks,
Reffu

Hi,
same issue here. Today the touchscreen stopped working suddenly after i flashed the Android Revolution HD 5.0 Rom yesterday. However, the S-Pen is still working fine. Installing other ROMs and the Stock ROM via Odin did not help. Issue allso appears in Touch-enabled-Recovery.
I see no reason, why this should be a hardware issue, although my N8000 came back from service a few days ago, where they also replaced the screen and digitizer.
Had anyone this issue before and was abled to resolve it?
Greets

I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2

to read this as a Note 10.1 newbie is not very encouraging. are there any similar facts between all of you like
which Note model do you have
how did you jaibreak (which method)
which rom did you have before
which rom do you have now
how did you flash a new rom
...
is there a way to find out whether the touchscreen is really "dead for touch"?

This is a bit scary - my Note 10.1 is arriving today, and I plan to root it at a minimum. I actually don't mind Touchwiz all that much on my Note 2 (which is running CleanROM ACE), so I think I might just root the 10.1 for now.
So restoring completely back to stock (via Odin) doesn't fix it? That is really odd that ROM-ing this thing might cause a hardware failure...

jiggyman said:
I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?

kkretch said:
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?
Click to expand...
Click to collapse
Did anyone solve this, I'm having the same problem.

I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.

reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
Just curious - did you just root, or did you root and install a ROM?
I am only rooted so far - haven't felt the need to ROM yet - partially due to worries about this happening. I bought a refurb from Best Buy and only get 90 days of warranty.

reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
If they say you got a new one, you got one. They'll tell you otherwise if there's an issue over the phone.
But I wouldn't be afraid of ROMs, but to be more diligent and wise when it comes to choosing them. It's like choosing a poisonous mushroom versus an edible one to make stroganoff or stir fry. If you know what to avoid for the next time and follow the correct process to doing the root and flashing, there will not be an issues.
This is from someone who has soft-bricked my first tablet and learned how to unbrick my SIM-less Captivate and Note 10.1. It's how you apply the method and how much attention you practice not getting stuck into these situations is what matters. Especially since I bricked my tablet via experimentation and un-bricked it on the same day with ease.
It's not some big complex deal of rocket science or something only the mere geniuses can do, its how you perceive yourself and how you act. If you believe that you will suck and brick it to kingdom come , it will happen intentionally or subconsciously.
In this case, it was a freak accident where the file/s accessed and deleted the wrong files which allowed for capacitive touchscreen use, and it should be reported to x developers if you have not done so already.
I have rooted and used the Revolution HD rom, the Rom where you customize the colors of the bar/other things, and on the Captivate, the AOKP Collective. I further customized the latter with the Xperia launcher as it zips.

Did anyone find a repair for this besides replacement? My Note 2 is doing the same thing now.

Has anyone found a fix for the touch screen not working yet??
Anyone have any ideas?

Technicians input for touch problem
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain that follows the instructions on the mod sites exactly as shown step by step will never have a problem, all those that do end up with paper weights or bricks didn't follow the instructions in numerical order.
Believe it or not even if after you have modded a rom and brought it back to standard they know it has been modded as they have a list of problems associated with repairs after roms have been modded so you are only fooling yourself they don't.
Same as the smoker that tells his Dr he has given up even though all the symptoms prove he really didn't.
So in my expert opinion if you play with modding and stuff it up why should you be eligible for a warranty claim ? The manufacturer has sold you or supplied a working item that you decided to f_ck around with and because of your stupidity expect some one else to pay for it.
I am not saying don't mod your phone with all the great roms out there but please to save yourself a lot of pain and cost some poor smuck trying to run a business in these economic times a lot of out of pocket from sending items back for replacement or warranty plus the time it takes to do all the paperwork and such, please please please read the instructions 300% or triple check you are doing everything exactly as the instructions say and you will be enjoying all the new benefits of that customised rom and laughing at all the noobs stuffing up their brand new device from not doing so.
I know this won't fix your problem but reread that last bit it was your problem as you are to clever to follow some one else's instructions

anyone have solution regarding this issue, mine have issue also, can anyone spare how to fix it without changing hardware?
---------- Post added at 06:47 AM ---------- Previous post was at 06:28 AM ----------
i hope anyone can solve my issue with touch not responding

WOW.. on TOPIC Flashing .pit might help ???
Gardum said:
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain
Click to expand...
Click to collapse
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck

erica_renee said:
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck
Click to expand...
Click to collapse
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir

popohunters said:
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir
Click to expand...
Click to collapse
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .

erica_renee said:
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .
Click to expand...
Click to collapse
thanks sir, im done the flashing with pit files+ official firmware but touch screen is still missing, is there a modem file for touch screen maybe i missed it while its in downloading process before i brick the touch screen

any hope out there?????
confused and need help
i have a n8000 , base band version N8000XXCLL1, my touch screen stoped responding while playing a game , only Spen works , tried resetting , but no help, I'm a no-voice when it comes to programing and need a step by step guide >>>> many thanks in advance for all your help

reffu said:
I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
I got the same problem after rooting my phone.... I used the following method and got ride of that Problem. ..
type this star code in in it Phone dialler *#2663#
Now you should see "TSP"
<update>
TAP on TSP ......it will take 5 seconds only....
......
NOW ENJOY ☺☺
Click to expand...
Click to collapse

[Q] Need help to update Samsung Galaxy S III I9300

Hello folks,
i am new here, i have a problem with one of my friends mobile Samsung Galaxy S III I9300 Android v4.0.4 (Ice Cream Sandwich), it so happened he dropped the mobile from his hand and from that moment, the device fails to load properly.
I tried to go to Recovery mode, by pressing Power key+DownVol key+Home key. The next screen was all fuzzy, it didn't show anything.
So i tried Power key+UpVol key(this time)+Home key, it showed a warning page, please see images to be more clear.
On continuing with the process, it went to Download mode.
I am little familiar with that process, since it is trying to update the device OS to a newer version of Android.
I did a little research and found out there was Android 4.4.4 Kit Kat available.
I can proceed to download that, but i want to know few things and i.e.,
The device is not Rooted.
CWR is not installed.
Whether it is safe to proceed with the update of Android Ice Cream Sandwich to Android Kit Kat.
I also found Galaxy S III can be updated to 4.3 (Jelly Bean), but i want your opinion which would be suitable for this device.
Thanks.
I do not want to brick my friends device, since i am getting paid to do this stuff. Hence i am requesting any kind of expert advice.
Thank you.
P.S: Any suggestion is welcommed and waiting for any reply impatiencly. Also if the moderator thinks this post must be in some other part of the forum, please do so. :fingers-crossed:

Hello again, i did a little research and found out this site, where it mentions in detail how to install ClockworkMod Recovery 6.0.4.7 on Galaxy S3 GT-I9300
http://trueandroid.com/install-clockworkmod-recovery-6-0-4-7-on-galaxy-s3-gt-i9300-how-to/
I did as mentioned in the tutorial and while opening the Odin, and checking the AP button, and selecting the non touch version of ClockworkMod Recovery 6.0.4.7 ; i am getting this error. Please see the snapshot.
It also say, PIT partition not found, does anyone know how to figure out this problem.
Or
Is it a hardware issue, do i need to change the motherboard or give it to technician to fix it.

First off: Have you tried posting it under the correct category on this forum? its under galaxy core... you have a galaxy S 3
Second, you can update if it stock... custom recoveries and roms do void warranty. That is, if the kitkat is for his phone it is no problem. upgrading wrong rom to your phone will mess with it yes. Boot loops and stuff.
Then again, if it droped I would rather have sent it in for repairs if it was still under the warranty .

canisalbus said:
First off: Have you tried posting it under the correct category on this forum? its under galaxy core... you have a galaxy S 3
Second, you can update if it stock... custom recoveries and roms do void warranty. That is, if the kitkat is for his phone it is no problem. upgrading wrong rom to your phone will mess with it yes. Boot loops and stuff.
Then again, if it droped I would rather have sent it in for repairs if it was still under the warranty .
Click to expand...
Click to collapse
I find it quite difficult to find my way in this forum, just newbie here.
But thank you for your concern. My friend has taken the mobile , he thinks its better to repair it by technician.
Enough of head-ache for a device that can't be repaired through updating, the mobile was trashed. Couldn't be salvaged through
updating.

desktopuser said:
I find it quite difficult to find my way in this forum, just newbie here.
But thank you for your concern. My friend has taken the mobile , he thinks its better to repair it by technician.
Enough of head-ache for a device that can't be repaired through updating, the mobile was trashed. Couldn't be salvaged through
updating.
Click to expand...
Click to collapse
I understand.
On top of the page there are 2 places you can enter stuff, one says "type to find device" and the other for searching all the forums. Writing i9300 - and clicking on the line - will get you the I 9300 forums

desktopuser said:
Hello again, i did a little research and found out this site, where it mentions in detail how to install ClockworkMod Recovery 6.0.4.7 on Galaxy S3 GT-I9300
http://trueandroid.com/install-clockworkmod-recovery-6-0-4-7-on-galaxy-s3-gt-i9300-how-to/
I did as mentioned in the tutorial and while opening the Odin, and checking the AP button, and selecting the non touch version of ClockworkMod Recovery 6.0.4.7 ; i am getting this error. Please see the snapshot.
It also say, PIT partition not found, does anyone know how to figure out this problem.
Or
Is it a hardware issue, do i need to change the motherboard or give it to technician to fix it.
Click to expand...
Click to collapse
Bro you should have unchecked the re partition option

Susan Dahal said:
Bro you should have unchecked the re partition option
Click to expand...
Click to collapse
OOPS! I did not even see that one

Boot loop after twrp restore of original Nandroid on gt-n8013

Howdy
Not sure where to start asking for help. Here is where I'm at :
Twrp (2.8.6?) works great... Too good
Used it to create a complete Nandroid of my original (jb) system.. I backed up everything I could see.
Installed a blisspop rom that also worked.
Decided to return to the original system .
In twrp did factory reset, advanced wipe of dalvic cache, data, and system each time.
Did restore with md5 check. 6 md5's all good, no failures
Restore from Nandroid file on ext micro sd. Everything successful. No fails reported anywhere.
Reboot. System tries to start but returns to twrp instead of booting to system. Have done this 3 times with same results.
My stock was something like UEUCOI1.
I hate to have to start over but will if that's the best I can do. If so I don't know where to proceed from here. Where to locate a stock room
Any suggestions are much appreciated,
Best regards,
Dr Dan

Jonathan Kang said:
Ok, I have seen what you have done. You installed and did too many things at once on TWRP! If you do that you will get a bootloop or a soft-brick which is very common. If I ever got stuck I just downloaded Samsung Smart Switch for Windows.
1st: Turn off your tablet/phone.
2nd: Press More then Emergency software recovery and initialization.
3rd: Press Device initialization.
4th: Take off your cover of your tablet/phone and see the sticker for the Model Number and the Serial Number and type it in.
5th: Sit back and wait for 10 - 120 minutes and it should be done!
(Not all steps have been written down in this post. You'll see it in the Smart Switch app for Windows.)
That should do it!
Hope I helped,
Jonathan
Click to expand...
Click to collapse
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:

drdan123 said:
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:
Click to expand...
Click to collapse
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan

drdan123 said:
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan
Click to expand...
Click to collapse
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
I actually starting to think that twrp is just not the right recovery for Note 10.1. When I was trying to flash the original software it happened to me too. It just has a bug or insufficiency to install system on some roms. Here is what I did:
-Installed gnabo rom for a system base. I STRONGLY SUGGEST THAT YOU FLASH THE SAME BASED ROM WITH THE ROM YOU WANT TO FLASH.
-Wipe everything EXCEPT system.
-Flash the rom you want. In my case it was the stock rom.
Well, not a proper, solid solution but if it's working, who cares?

Hi furkey,
I also saw the gnabo room. I got 6 files...
Gnabo room v8
N801x+v6. Zip
Update-supersu-v1. 99.zip
Gt-n8013-kk-WiFi -fix .zip
Stock-gt-n8000-leaked-kk-boot.img-cwr-installer.zip (really a convoluted name?)
V8-final-fix.zip
I was unable to get the kernal. Each attempt sent me to the playstore to install Mega drive. I have it already installed and am fully subscribed but...
I wrote Mikyno (the creator of gnabo) asking for help but never heard back.
The morass of gnabo files is bewildering. I don't know what I need and don't need and how or with what tools to load them.
I'm pretty sure I need the kernal as I understand it the kernal is the interface between hardware and software. Without it and without some guidance or support from the creator I gave up.
Then I spent a couple of days trying to locate a 4.1,2 stock firmware (ready to give up on roms altogether) . There were several published but all links have expired and the posters do not respond. Sammobile requires a puzzle be solved to register. I spent several hours trying to make my tablet move a puzzle piece. No success.
Finally I gave up and reloaded the blisspop I'd installed to start this journey. It is a bit flakey at times but it's all I have. I cannot go forward and cannot go backward.
Any directions you can send my way are much appreciated.
Dr Dan

Hello,
I too am experiencing this. I really can't throw this device away. I have even tried a stock rom from high on android. Downloaded and used odin to flash to no avail. I hope anyone will have an answer or another stock rom or anything!
Thank you!
Tony

Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.

Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.

badteddy said:
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.
Click to expand...
Click to collapse
Hi Tony,
Thanks much for the links. That site has always given me grief. When I select download it simply takes me back to the same page to select download again etc. This time your 2nd link worked! Great day. I got the file, unzipped it, removed the ". Md5" extension and ran the md5 Checker. It failed. I hope you checked yours before installing it. Is there any other place I can get that file. Upon returning to the same page to dl the file again I got stuck back in the old circle I have always found myself in.
On anther note; I think furkey is stepping in to help. He wants us to try the gnabo rom. It looks good but there are 7 files needed. I don't know if furkey was referring to you or to me in his last post. I'll ask and see. I think he can easily clear the air on what is needed to load gnabo.
I also am using the latest twrp (2.8.6 I think).
I'll get back when I learn more.
Dr Dan

furkey said:
Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.
Click to expand...
Click to collapse
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.

drdan123 said:
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.
Click to expand...
Click to collapse
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
OK. I tried out the Tab S Sensation Rom. It is outstanding. Here is a link that shows what I did,
http://forum.xda-developers.com/showpost.php?p=67440486&postcount=342
Furkey recommended it and he was spot on!
I was never able to dl the link you gave but I did find the file and checksum on a different mirror. I finally got it but have no use for it as the tab s room works better than the stock.
Enjoy,
Dr Dan

furkey said:
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.
Click to expand...
Click to collapse
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan

drdan123 said:
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan
Click to expand...
Click to collapse
You're welcome mate. I am glad that worked out for you

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
Hello, drdan123,
I am Jonathan Kang, and I'm using my secondary account.
So try to use Samsung Kies because it probably supports older devices. Smart Switch is for the newer devices. I hope I helped!