Hello,
I am new here and asking you guys for a real help.
what is the best ROM for TF700T Device ?? Because i am facing too much lag .
and whats the best kernel ??
Any of the Katkiss roms starting with the Lollipop version are great. I would go for the Katshmallow, but that is totally personal preference. There are no kernels to chose from. You can fine tune the existing one with the Katkernel app, but only up to MM.
berndblb said:
Any of the Katkiss roms starting with the Lollipop version are great. I would go for the Katshmallow, but that is totally personal preference. There are no kernels to chose from. You can fine tune the existing one with the Katkernel app, but only up to MM.
Click to expand...
Click to collapse
Thanks for your Replay berndblb , I appreciated that.
here is my TF700T information , Please take a look and guide me to the right pathز
please give me the requirements step by step , Thank you .
Note : someone upgraded for me to CM11 - Crombi KK , but the most said CROMi-X much better.
But I believe with your personal choose of katkiss rom please tell me what to do in easy steps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Much more important is your bootloader version and what recovery you are using.
Read my Beginners Guide in the General section. It's the first sticky
berndblb said:
Much more important is your bootloader version and what recovery you are using.
Read my Beginners Guide in the General section. It's the first sticky
Click to expand...
Click to collapse
Hello, I think that i made a mistake
right now my device is stock to a blue screen teamwin
I tried to go to fastboot and I can see my device numbers and letters.
but when I tried to flash twp it is keep telling me "cannot load twrp img"
Note : now my device is stock on teamwin blue screen.
crazybabyboy911 said:
Hello, I think that i made a mistake
right now my device is stock to a blue screen teamwin
I tried to go to fastboot and I can see my device numbers and letters.
but when I tried to flash twp it is keep telling me "cannot load twrp img"
Note : now my device is stock on teamwin blue screen.
Click to expand...
Click to collapse
Looks as if the recovery flash was successful, don;t know why it does not boot...
Are you sure you flashed a compatible TWRP version for the TF700?
Post your bootloader version and the recovery version you flashed with a link to it's source.
And don;t do anything rash now! You are fine - nothing happened that can't be fixed. So far....
berndblb said:
Looks as if the recovery flash was successful, don;t know why it does not boot...
Are you sure you flashed a compatible TWRP version for the TF700?
Post your bootloader version and the recovery version you flashed with a link to it's source.
And don;t do anything rash now! You are fine - nothing happened that can't be fixed. So far....
Click to expand...
Click to collapse
Dear berndblb
Your cooperation in this matter is highly appreciated.
I am already done with the Blue Screen of teamwin on the same day i wrote about that issue.
I have found a solution that worked out for me.
right now i am running KatKiss ROM MarshMallow 6.0.1 that can be found on this source :
https://forum.xda-developers.com/transformer-tf700/development/rom-t3282166
that was taken from your second replay on your thread " Beginners Guide to root and flashing a custom ROM on the TF700T"
anyway, I have some question about upgrading my twrp version.
Because I am running an old version of twrp with exactly v2.6.3-that3.
so please help me upgrading my twrp recovery project.
Thank you.
Related
Good Evening/Hello/Hi,
I own a sgh-i997 and I am running stock firmware (Froyo 2.2), rooted and bootloader unlocked. I was attempting to update to KitKat 4.4, I succeded in installing 2013.04.30-CWM-Synthesis-1.2Ghz.zip Kernel with SGS kernel flasher and that installed CWM, then I attempted to flash CWM flashable EFS to backup my IMEI. Then I installed the CM9 (ICS) rom and when I rebooted the phone and went into CWM i encountered this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now CWM is useless, I cannot use it to flash another room or even get into ADB mode to use ODIN.
Hope you guys can help me.
Thank You.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Campos_Kill said:
Good Evening/Hello/Hi,
I own a sgh-i997 and I am running stock firmware (Froyo 2.2), rooted and bootloader unlocked. I was attempting to update to KitKat 4.4, I succeded in installing 2013.04.30-CWM-Synthesis-1.2Ghz.zip Kernel with SGS kernel flasher and that installed CWM, then I attempted to flash CWM flashable EFS to backup my IMEI. Then I installed the CM9 (ICS) rom and when I rebooted the phone and went into CWM i encountered this
and now CWM is useless, I cannot use it to flash another room or even get into ADB mode to use ODIN.
Hope you guys can help me.
Thank You.
Click to expand...
Click to collapse
This:
mrkhigh said:
You have the wrong boot loader installed... Flash back to stock using heimdal one click then update to ICS then jb then kitkat.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Curious if you can use the unbrick (via Odin) instead (to get you to Gingerbread as well), but the above would be a good starting point nonetheless
joel.maxuel said:
This:
Curious if you can use the unbrick (via Odin) instead (to get you to Gingerbread as well), but the above would be a good starting point nonetheless
Click to expand...
Click to collapse
Ok, thanks I'll try that today
HELP::::roblem loading CWM Recovery:
Firmware: 2.3.6
BaseBand: I997UCLB1
Kernel: 2.6.35.7-I997UCLB1-CL954414
Build Number: GINGERBREAD.UCLB1
@Sahir said:
Firmware: 2.3.6
BaseBand: I997UCLB1
Kernel: 2.6.35.7-I997UCLB1-CL954414
Build Number: GINGERBREAD.UCLB1
Click to expand...
Click to collapse
Did the above unbrick work? If having problems finding a download, need not look far.
joel.maxuel said:
Did the above unbrick work? If having problems finding a download, need not look far.
Click to expand...
Click to collapse
Yes it works...!!
Q&A for [ROM][5.1][Experimental] CyanogenMod 12.1 | Linaro 4.9 | Code Review
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1][Experimental] CyanogenMod 12.1 | Linaro 4.9 | Code Review. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
it's great thank you
ROM is working great on XT1033 (Moto G 2013 - Dual Sim). Didn't need to soft boot or anything of the sort. Cleaned everything except internal memory and installed the ROM. As of now, its AWESOME!!
Will test for the usual bugs and let you know.. [EDIT] I've found none of the bugs that I encountered in the other 5.1 ROMs out there... Simply Superb work!!
P.S: The G-Apps in the latest build link was for 5.0.x. Gave me an error while flashing. The G-Apps for 5.1 is posted by euroskank at fitsnugly.euroskank.com under banks(Google "android 5.1 gapps"). Sorry... can't post links till I reach 10 posts..
Working good
The rom is working fairly well, no signal icon bug, smooth and with effective memory management. Battery life is reasonable, but not close to CM11 Roms.
One question : Should i flash the 41.18 first to flash this ROM? Because in AOSP i get screen flickering issue
Thanks
Let's try 20150426 out.
http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Look for Q10 on how to update to the newer bootloader
I get stuck at the CyanogenMod Boot Logo its been loading for 20 mins lol
Does anyone else get the message: Insert a SIM to send SMS whenever using Hangouts to send a text?
How do I enter build. Prop in bootloader
How do I enter build. Prep info in bootloader for the latest builds from 5-4-15?
Thanks for the help guys I'll just go back to kit Kat
I can't install themes.
Hi... I was trying to install themes but I can only install one.
I did a clean install with full wipes, i use "Attacked Kernel V10 [Linaro|-O3|Graphite]" and SElinux is "Permissive"
Build : 12.1-20150504
Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks.
fall3n_soul said:
Thanks for the help guys I'll just go back to kit Kat
Click to expand...
Click to collapse
What are you trying to edit in the build.prop? If you have successfully installed the ROM, the build.prop can be accessed using a tool like ROM Toolbox and edited that way.
a_gert said:
What are you trying to edit in the build.prop? If you have successfully installed the ROM, the build.prop can be accessed using a tool like ROM Toolbox and edited that way.
Click to expand...
Click to collapse
Thank you so much you¡!!!!!!! Now my only issue is after a wipe my phone stays on the linefeed boot ever and it does it with any ROM I install. What could cause that it will only Lisa's 4.4.4 optimized
fall3n_soul said:
Thank you so much you¡!!!!!!! Now my only issue is after a wipe my phone stays on the linefeed boot ever and it does it with any ROM I install. What could cause that it will only Lisa's 4.4.4 optimized
Click to expand...
Click to collapse
Not sure I understand. You're stuck in a boot loop or it stalls on the boot animation? Or it's stuck on the bootloader unlock screen?
a_gert said:
Not sure I understand. You're stuck in a boot loop or it stalls on the boot animation? Or it's stuck on the bootloader unlock screen?
Click to expand...
Click to collapse
I fixed the issue I was stuck in a boot loop. I used touchwiz to fix the ext. And boom fixed. Thank you guys for putting up with my mood swings and thank you guys for the help.
doex xposed works?
Hey guys I´ve never flashed a custom ROM in my device so i have some doubts
What version should I be flashing in? A snapshot of cm 12 or the nightly of cm 13?
The same ROM serves to all moto G devices? (XT1032, XT1033 and XT1034)?
What are the risks if the flash go wrong and can i fix it?
which is the best Gapps version?
I´m in kit kat 4.4.4 if im going to flash cm 13 which is 6.0 i need first to update to lollipop?
What is the easyest way to flash? Manually? From a computer?
If you´ve read and answer this thank you, it means a lot to me because I dont have any experience with flashing and anything that you say here can help me. Thank you.
And sorry for the bad english, I´m still learning
srsmochille said:
Hey guys I´ve never flashed a custom ROM in my device so i have some doubts
What version should I be flashing in? A snapshot of cm 12 or the nightly of cm 13?
The same ROM serves to all moto G devices? (XT1032, XT1033 and XT1034)?
What are the risks if the flash go wrong and can i fix it?
which is the best Gapps version?
I´m in kit kat 4.4.4 if im going to flash cm 13 which is 6.0 i need first to update to lollipop?
What is the easyest way to flash? Manually? From a computer?
If you´ve read and answer this thank you, it means a lot to me because I dont have any experience with flashing and anything that you say here can help me. Thank you.
And sorry for the bad english, I´m still learning
Click to expand...
Click to collapse
I'd start with installing fastboot and drivers on your PC - http://forum.xda-developers.com/showthread.php?t=2588979
Unlocking bootloader - https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Installing TWRP on your device - http://forum.xda-developers.com/mot...-2-8-2-0-touch-recovery-t2980621/post57672469
And backing up you current working rom.
Choice between CM12 and 13 is up to you, but AFAIK 12 is not being developed anymore. There should be no problem going to MM straight from KK and as for GApps - I personally would not flash them at all, but if you want them you need some small version because there's not enough space for stock or bigger ones on system partition of Moto G. Just look what different versions contain and choose the one that has what you need.
I prefer flashing through TWRP, it's the easiest way I believe.
And be prepared for anything to go wrong.
Thank you, one last question, if i backup my current ROM it also backup my apps? if not post a method of how to do that
srsmochille said:
Thank you, one last question, if i backup my current ROM it also backup my apps? if not post a method of how to do that
Click to expand...
Click to collapse
TWRP will backup everything, unless you un-check something in a backup settings, but by default everything that you need is included, so just bakcup with default settings.
Mind that unlocking bootloader WILL WIPE EVERYTHING anyway.
and one more thing ..
if you hav'nt done anything with your falcon till now,
first flash official stock 5.1 from
HERE!
what it'll do is, it will update your bootloader,along with radio n stuff,
the lollipop bootloader is need for lollipop or marshmallow builds
minimale_ldz said:
I'd start with installing fastboot and drivers on your PC - http://forum.xda-developers.com/showthread.php?t=2588979
Unlocking bootloader - https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Installing TWRP on your device - http://forum.xda-developers.com/mot...-2-8-2-0-touch-recovery-t2980621/post57672469
And backing up you current working rom.
Choice between CM12 and 13 is up to you, but AFAIK 12 is not being developed anymore. There should be no problem going to MM straight from KK and as for GApps - I personally would not flash them at all, but if you want them you need some small version because there's not enough space for stock or bigger ones on system partition of Moto G. Just look what different versions contain and choose the one that has what you need.
I prefer flashing through TWRP, it's the easiest way I believe.
And be prepared for anything to go wrong.
Click to expand...
Click to collapse
Anyone can help me, i try to install cm13 on xt1033 with TWRP and this error appear
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whenever I try to flash any file in TWRP, it gives me this error. I'm not even able to root my device bcz of this error. I just installed TWRP and flashed custom ROM today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
munimjaffer said:
Whenever I try to flash any file in TWRP, it gives me this error. I'm not even able to root my device bcz of this error. I just installed TWRP and flashed custom ROM today.View attachment 5297435
Click to expand...
Click to collapse
It(unable to open loop device) is actually a compatiblity issue; check Post. Also this issue may have occurred due to some wrong procedure following; check Post comment #125.
Maybe, what i feel is that your phone is stuck in bootloop?
I would suggest you to flash the twrp again, and flash the custom rom after that again, with proper procedure. Be patient and chill. Your device is gonna be alright.
I would link a YouTube tutorial for flashing twrp on Poco X3, incase you need.
Also there is no official twrp available for Poco X3. Maybe the issue could be bc of that too. But hey, you can still try.
eleven.co said:
It(unable to open loop device) is actually a compatiblity issue; check Post. Also this issue may have occurred due to some wrong procedure following; check Post comment #125.
Maybe, what i feel is that your phone is stuck in bootloop?
I would suggest you to flash the twrp again, and flash the custom rom after that again, with proper procedure. Be patient and chill. Your device is gonna be alright.
I would link a YouTube tutorial for flashing twrp on Poco X3, incase you need.
Also there is no official twrp available for Poco X3. Maybe the issue could be bc of that too. But hey, you can still try.
Click to expand...
Click to collapse
Alright but I don't have any issue other than not being able to root. Everything in my phone is working 100% fine. So I think I should let it be the way it is until I get some unskippable error. Thanks
Just curious: what version TWRP are you running?
it's 3.4.0
pnin said:
Just curious: what version TWRP are you running?
Click to expand...
Click to collapse
I may be wrong, but it looks like you have an old version, the most current one being v3.5.2_10-0 by brigudav...
pnin said:
I may be wrong, but it looks like you have an old version, the most current one being v3.5.2_10-0 by brigudav...
Click to expand...
Click to collapse
So do I need to install an updated version?
munimjaffer said:
So do I need to install an updated version?
Click to expand...
Click to collapse
definitely
Hey everyone,
Im trying to flash twrp and root my Note 20 Ultra (N985F-D) but I cant seem to find any tutorials that give clear instructions for this specific device variant. If anyone has proper instructions with links or even a video tutorial that would be great.
I appreciate you help
Same here. N985F. Bricked tf out my phone yesterday trying so many different methods. There's literally nothing out there. I spent all night looking. Very frustrating
If I find anything I will keep u in the loop. I'm really trying to find something. Anything
Try DrKetan ROM, in the download files there is a working TWRP recovery
kikireki said:
Try DrKetan ROM, in the download files there is a working TWRP recovery
Click to expand...
Click to collapse
Not N985F on android 11... already tried flashing his software and plenty of others last night. Did NOT work. If you were able to flash successfully, providing you have THE SAME EXACT MODEL and OS ... please feel free to share screenshots and/or pics.
diamondprincessxoo said:
Not N985F on android 11... already tried flashing his software and plenty of others last night. Did NOT work. If you were able to flash successfully, providing you have THE SAME EXACT MODEL and OS ... please feel free to share screenshots and/or pics.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kikireki said:
View attachment 5408229
Click to expand...
Click to collapse
OK... what are you showing me? I see u have root access. I'm referring to TWRP. Do you have TWRP? U can have root access and not have TWRP..... I have root access too and no TWRP. I have android stock recovery.
diamondprincessxoo said:
OK... what are you showing me? I see u have root access. I'm referring to TWRP. Do you have TWRP? U can have root access and not have TWRP..... I have root access too and no TWRP. I have android stock recovery.
Click to expand...
Click to collapse
I am showing you a Custom Rom, Dr.Ketan ROM which I installed through TWRP.
If you have TWRP... lmk. And your build is different from mine. So IF.... IF TWRP worked for you on your build, then I'd have to tweak it somehow for mine. But showing me this doesn't show me anything but the fact that you're rooted. And root is super easy....
kikireki said:
I am showing you a Custom Rom, Dr.Ketan ROM which I installed through TWRP.
Click to expand...
Click to collapse
OK well I had installed Dr ketan rom without twrp last year. Twrp never worked for me
Not saying I don't believe u... but can u show me what version TWRP u have ?
diamondprincessxoo said:
OK well I had installed Dr ketan rom without twrp last year. Twrp never worked for me
Click to expand...
Click to collapse
If it works on my phone, it should work on yours too, we have the same Model.
kikireki said:
If it works on my phone, it should work on yours too, we have the same Model.
Click to expand...
Click to collapse
My software build is different.
kikireki said:
If it works on my phone, it should work on yours too, we have the same Model.
Click to expand...
Click to collapse
Not only is the software build different... the model is one number off. Makes a difference believe it or not
diamondprincessxoo said:
Not only is the software build different... the model is one number off. Makes a difference believe it or not
Click to expand...
Click to collapse
I'm not an expert here... but I have years of experience flashing phones and bricking them too. So I know if it's not the same Model and software build.. there's a good chance it won't work. My phone is from Panama.... I just don't wanna brick my phone again flashing something that's not meant for my software build or exact model.