Database Info

Micromax Elanza 2 Flash File (Stock ROM)

Hello Respected Users,
Here I m presenting Untouched Official Firmware file (Flash File or Stock ROM) With Flash tool of Micromax Elanza 2
:angel::angelownload Link :: Click Here
Process for Flashing ::
1) Extract This Downloaded Zip
2) You will found Folder With name Fastbootdownload
3) Open this Folder
4) You Find Bat File Named ""8x10_fastboot_all_images""
5) Before Open that file Connect your Phone With Your Computer (Must Check USB Debugging Mode Must be On)
6) Open File..
7) Now Soft is upgrading :good::good:
Note ::
-> You Can unbrick You device By this tool (Soft Brick Device can unbrick by this file)
-> To Unbrick You need to your your phone in ""Fast Boot Mode"" By Press Keys Volume Up + Volume Down + Power Key
Open file named ""8x10_fastboot_all_images"" then connect your phone
Any Query Feel free and You can Contact me

how to unbrick device using this rom plzz explain whole procedure i have mmx elanza 2 and it is soft bricked

proximity problem
after install it
when i make a call screen become black still call ends . i can't cut call . if i off the proximity sensor then every thing remains ok but i want working proximity like before ..... please help me .......

mohsin.r.munshi said:
Hello Respected Users,
Here I m presenting Untouched Official Firmware file (Flash File or Stock ROM) With Flash tool of Micromax Elanza 2
:angel::angelownload Link :: Click Here
Process for Flashing ::
1) Extract This Downloaded Zip
2) You will found Folder With name Fastbootdownload
3) Open this Folder
4) You Find Bat File Named ""8x10_fastboot_all_images""
5) Before Open that file Connect your Phone With Your Computer (Must Check USB Debugging Mode Must be On)
6) Open File..
7) Now Soft is upgrading :good::good:
Note ::
-> You Can unbrick You device By this tool (Soft Brick Device can unbrick by this file)
-> To Unbrick You need to your your phone in ""Fast Boot Mode"" By Press Keys Volume Up + Volume Down + Power Key
Open file named ""8x10_fastboot_all_images"" then connect your phone
Any Query Feel free and You can Contact me
Click to expand...
Click to collapse
I m getting an error that no device found. How to connect my phone. Plz help me. Reply as soon as possible

I have hard bricked my micromax elanza 2 A121 . It may be because i have rooted my phone. It shows no charging, no vibration, no light and shows QLoader 9008 while connecting to pc. How can i unbrick it? Please help.....

[GUID][FIX] How to fix MTK bug: No Simcard - No GSM network - and....

hello every one... i had this problom and i fixed it, i see lots of peeple having this problom
i hope this saves some one else's 3 day of life !!!!!!! My phone was MT6572
"" MTK ONLY ""
Your device doesn't detect simcard?
you flashed your phone and it can't connect to gsm networks?
is your phone stuck on airplane mode and you can't tun air plane mode off??
you can't change imei?
in MTK Droid tools you get these errors??
Baseband v: -----
and even when you root your device you get this error?
--- ERROR : pttycmd1 device NOT found!
you get this error in IMEI&SN write tool?
Enter to ModemMeta Fail
there is no CMS menu in unclemobile tools?!!
i had this problom before... and i spend 3 days on it !!!
first of all you need to have all of the MTK drivers!
i have links to some of them...
http://www.4shared.com/get/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
CDC drivers! http://www.4shared.com/get/-7DgNbgM/Android_Mtk_CDC_Driver.html
if you need a driver just search in google !!
You need this programs too "windows"
SP FLash tool (last version) http://forum.xda-developers.com/showthread.php?t=2650125
MTK Droid Tools & Root (last version) http://forum.xda-developers.com/showthread.php?t=2160490
And you need your phones "secro.bin" file ! its so tiny...
i will attach my mobile secro.bin file in compressed format! "MT6572"
sorry my net speed is very low, i can't upload step by step movie or other things...
so .. when you installed all of the drivers and apps you must be ready to go!
1-open the SP Flash tool...
2-select your phones "Android_scatter.txt" file (it's in the offical flash file "rom" for your phone)
if you'r phone boots up ok skip to the 6
3-Format your phone "WARNING!! DON'T FORMAT BOOTLOADER"
3.1 press start
3.2 turn off your phone
3.3 press start
3.4 connect your phone
3.5 wait for the process to compleate
3.6 remove USB cable from the phone
4- Go in download mode
4.1 load the scatter from offical flash (you already did i think?)
4.2 Press start
4.3 turn off your phone
4.4 connect usb cable to your phone
4.5 wait for the process to compleate...
4.6 remove the usb cable
5- if you want to do something with the mount screapt or ect... its for the best that you do it now
6- in SP flash tool uncheck every thing
6.1 check SEC_RO
6.2 click on the location area of the SEC_RO
6.3 select your own SECRO.bin or NODL_SECRO.bin
6.4 click download
6.5 turn off your phone
6.6 connect your phone usb to pc
6.7 wait for the process to complete
7- boot up your phone. you can now aces to GSM/WCDMA/LTE or ect... networks but your imei is invalid !
here the things now you can do that before you couldn't do:
8- go to MTK Droid tools and root
now you can see Baseband v is not empty
Root Your Phone if you didn't
9- Select ROOT in MTK TOOLS
10-in your phone allow super user or super su
when the light in the app turned green you are ready to pull the new imei to your phone
"its for the best that you use an old phone imei"
select IMEI/NVRAM
insert the new imei(s) and ok....
10- reboot your phone and see the imei *#06# it is ok now :victory:
if i helped you press THANKS :good: button

First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.

madalyn17 said:
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
Click to expand...
Click to collapse
1-thanks
2-i dont know ur phone, if i know i could help you
if ur problem didnt solve, give me details and i will help u

--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..

Mr.Ak said:
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Click to expand...
Click to collapse
Flash the secro.bin file with sp-flashtoo, that shuld fix it. If the secro.bin file i did upload didnt work for you find the one that is for your device in its backup (from backup that u take from ur device before) or flash files for sp-flashtool (from internet)
Sent from my SM-G360H using XDA Forums

thank you very much
genius method !!

a google search brought me back here, and now i see.. my english was pretty terrible back then.

it works?

marshmallow for k4000

I am new to this forum and i have an oukitel k4000 phone with android 5 on it after reading about marshmallow i thought an update would be good , so emailed oukitel and they sent me a link to a marshmallow update i have listed whats in it below but i am not sure what to do .I would have attached the link to the update but forum wouldn't let me . I would be grateful for any help . Speaking to a local phone shop man who didn't seem to be very good but he said that with the cpu mtk 5735 and the amount of memory 2gb 16gb that my phone wouldn't be fast enough .
Folders apdb , info , log , modemdb
Files boot , cache , checksum , flashtoollib.dll , flashtoollibv1.dll , flashtoollibex.dll , lk.bin ,logo.bin , mt6735m_android_scatter ,preloader_magc6375m_35gu_l1.bin , recovery , secro , sytem , trustzone.bin , userdata
Zipped target_files-package<
thanks john

johnevans41 said:
I am new to this forum and i have an oukitel k4000 phone with android 5 on it after reading about marshmallow i thought an update would be good , so emailed oukitel and they sent me a link to a marshmallow update i have listed whats in it below but i am not sure what to do .I would have attached the link to the update but forum wouldn't let me . I would be grateful for any help . Speaking to a local phone shop man who didn't seem to be very good but he said that with the cpu mtk 5735 and the amount of memory 2gb 16gb that my phone wouldn't be fast enough .
Folders apdb , info , log , modemdb
Files boot , cache , checksum , flashtoollib.dll , flashtoollibv1.dll , flashtoollibex.dll , lk.bin ,logo.bin , mt6735m_android_scatter ,preloader_magc6375m_35gu_l1.bin , recovery , secro , sytem , trustzone.bin , userdata
Zipped target_files-package<
thanks john
Click to expand...
Click to collapse
Hi,
Follow these steps to update your phone (or ask Oukitel via mail how to update it):
0). Download and extract this program https://www.needrom.com/wp-content/uploads/2016/01/Pack-SPMDT-v3.1544.00.00.rar
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6735M_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.

[tutorial] root & restore imei

Hello everyone ,
This is my firt's tutorial !
Today i'm going to teach you how to root your phone ( in my case it's a Ulefone Germini Pro ) and restore IMEI's.
/!\ATTENTION/!\ i don't take any responsability for anything that happen to your phone ! So do it at you own risk ! /!\
Before starting , my phone as a MTK chipset , so i don't advise you to try this if your chipset isn't a MTK ! And you need a OTG cable with a mouse !
Lets go :
TO ROOT [WORKS FOR ULEFONE GERMINI PRO] :
Important be sure to download PDANET it will solve alot of problems with the drivers !!
0-Enable USB DEBUGGING
1- Download the stock rom of your phone and check if is the same version as your phone ! ( exemple : my phone is an android 7.1.1 so i need to download the stock room version 7.1.1)
2- Download the drivers : http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip and install them !
3-Download twrp (recovery.img) : https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
4-Download Modified Boot (boot.img) : https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
5-Download latest version of SPFlash Tool : http://spflashtools.com/category/windows
6-Now you need to download SuperSu , but this one as to be downloaded with your phone directly on you need to put it on a sdcard , as you want !
here's the link : https://download.chainfire.eu/supersu-stable
7- Run Flashtool.exe
8- Choose scatter file ( it's on your downloaded Stock Rom )
9- Untick everything
10- Tick recovery
11 - Click on location to choose the custom recevery.img ( you downloaded before )
12 - double check only recovery is tick
13- Turn off you phone and plug it one time and check if the pc detect's it
14 - Unplug it
15 - So now the phone stills off , on sp flash tool click download
16- Plug your phone and wait few seconds
17 - the flashing should start
18 - if all go well you could see a green arrow on the program
19 - now untick recovery
20 - tick boot
21- click on location and find your custom boot.img
22 - and flash it the same way as recovery.img
23 - Now as a said before if you have downloaded SuperSu direclty in your phone , just turn it on by pressing power + volume UP
24 - You should see a little menu , use volume up to choose recovery and volume down to confirm it
25-TWRP should appear
26 - Put the otg cable on your phone and plug a mouse on it
27 - you should get a message asking to modify system , with the mouse slide to authorize
28 - after that click on install
29 - choose the superSU.zip where you download it
30 - slide to flash it
31 - Reboot and you should get rooted
32 - Enjoy
TO RESTORE YOUR IMEI'S :
You need :
-PC
-The Program
-The Stock room you downloaded before
- The drivers
- The box of your imei's
Let's go :
0- Download the program
http://www12.zippyshare.com/v/UafLqKD2/file.html
Important be sure to download PDANET it will solve alot of problems with the drivers !!
1- Start the program
2- Go to help about sn and check that you have a new version mine is : 1.1604.00
3- Comport : select USB VCOM
4- Target Type : Select SmartPhone
5- click on system config
6- tick imei and dual imei ( if you have 2 imei's else tick only imei )
7- click on MD1_DB and choose a file in your stock rom that the name start like this :
MDDB_InfoCustomAppSrcP_MT6797_S00_MOLY_LR11_W1603_MD_MP_V62_4_P3_1_ulwctg_n.EDB
Be sure to check that and the end of the file is a .EDB
8- click on AP_DB and choose a file in you stock room that the name is start like this :
APDB_MT6797_S01_alps-mp-n1.mp9_W17.18
Be careful you stock room can contain to files choose the one that end with a number and not with a ENUM
9 - click on save
10 - power off you phone and disconnect it from the pc
11- press start
12 - put you imei's
13 - press ok
14 - connect your phone
15- if it's all okay you should see a message with passed on it ! IF it fails try again one time because my firts time failed too
16 - After getting the message passed , disconnect your phone and turn it on !
17 - You should get your imei's back !
18 - ENJOY !!
Credits :
Annubiis : For helping with my phone.
RAMANDEEP SINGH from androidweblog.
dodos from bbs.elephone .
If it helped you click on say thank's and if you need help comment this post !

Thanks alot bro it worked for my lenovo k8 plus dual sim phone...... and also PdaNet is must i understood.....

Redmi note 7 pro working ?

Mine is Samsung m10s, exynos, latest version Android 11. Do u think it will woerk on my phone, actually my phone says imei NG status and I'm unable to make calls, mobile data or sms. Please help me

MYA-L23 Boot Loop / unbrick

[tutorial]
Unbrick a Mya-L23 Huawei.
Hi recently I got my hands on a Mya-L23 and I thought it would be very good to use as a In Car Waze, so since I use a tasker app for this I needed root, so I did a booboo, rooted it wrong and ended up with a VERY nasty bootloop ( I even did open it to remove the batter ) , however I was able to recover it and see that it was almost unbrickable.
The Chip inside a Huawei Y5 2017 is basically a MT6737T so thankfully there's a tool we can use to write directly to the chip ! ( YAY ) it's called Smart Phone Flash Tool ( SP tool ) , so basically we are going to overwrite the whole phone so we have a new and fresh install.
- tools:
you are going to need:
SP tools
you can get them from here ( 2019 )
https://aiomobilestuff.com/download-sp-flash-tool-newest-mt6752-mt6732/
https://spflashtool.com/download/
( very handy troubleshooting page for this software https://www.gizmoadvices.com/fix-sp-flash-tool-stuck-0/ )
MT65XX USB VCOM
https://mydevfiles.com/download/mt65xx-usb-vcom-driver/
Rom *this oneworked for me*
filename: Huawei_Y5_2017_MYA-L23_(Maya-L23C469B127)_by_(FirmwareOS.com).zip
https://androidfilehost.com/?fid=11410963190603900863
you can look for other roms here:
https://firmwareos.com/category/huawei/page/2
https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=14554
The ROMS ARE HUGE !!!!!!!!!
- How to do it.
1- Install the MT drivers
2- Open the rom ( unzip it )
3- locate the "download agent file" ( this is a file that will tell SPtool what will be downloaded )
in the rom I used it was called: DA_SWSEC.bin and it was located in a folder called download agent
4-locate the scatter loading file ( inside the firmware folder of the rom ) , this is a text file in my case it was: MT6737T_Android_scatter.txt
5- Now open the SP flash tool
6- Press the download tab
it will have a screen with 3 things you can write, go to where it says: "Download agent" click on choose , and add the the download agent file you identified before
7-Load the scatter loading file, pressing on choose on the second choose button, if everything is ok it will read a lot of files, and will take like 10 minutes or so... be patient
8-you will see below this a select list that says:
Download Only, Firmware upgrade, format all + download
for now select: Download only, if it fails, try Firmware upgrade, if that fails, then Format all + download
8-WITHOUT THE PHONE CONNECTED TO THE PC PRESS the Green Download button on SP tool
9-Hold the VOL DOWN button on your phone ( even if it is on a boot loop )
10-Insert a USB cable from the PC to the phone, keep the VOL DOWN BUTTON PRESSED until it starts showing a yellow like , then the rom will be written to your phone. ( after this most likely it will be alive again )
11- Profit !
---------------------- Do all of this at your own risk ----------------------
Most likely this will work with other y5 or even other phone models with the right rom and download agent...
Have a nice day !
XDA:DevDB Information
Fix BootLoop Unbrick MYA-L23 , Theme for the Huawei Y5 (2017)
Contributors
chuby007
Version Information
Status: Testing
Created 2019-10-24
Last Updated 2019-10-24