Hello everyone ,
This is my firt's tutorial !
Today i'm going to teach you how to root your phone ( in my case it's a Ulefone Germini Pro ) and restore IMEI's.
/!\ATTENTION/!\ i don't take any responsability for anything that happen to your phone ! So do it at you own risk ! /!\
Before starting , my phone as a MTK chipset , so i don't advise you to try this if your chipset isn't a MTK ! And you need a OTG cable with a mouse !
Lets go :
TO ROOT [WORKS FOR ULEFONE GERMINI PRO] :
Important be sure to download PDANET it will solve alot of problems with the drivers !!
0-Enable USB DEBUGGING
1- Download the stock rom of your phone and check if is the same version as your phone ! ( exemple : my phone is an android 7.1.1 so i need to download the stock room version 7.1.1)
2- Download the drivers : http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip and install them !
3-Download twrp (recovery.img) : https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
4-Download Modified Boot (boot.img) : https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
5-Download latest version of SPFlash Tool : http://spflashtools.com/category/windows
6-Now you need to download SuperSu , but this one as to be downloaded with your phone directly on you need to put it on a sdcard , as you want !
here's the link : https://download.chainfire.eu/supersu-stable
7- Run Flashtool.exe
8- Choose scatter file ( it's on your downloaded Stock Rom )
9- Untick everything
10- Tick recovery
11 - Click on location to choose the custom recevery.img ( you downloaded before )
12 - double check only recovery is tick
13- Turn off you phone and plug it one time and check if the pc detect's it
14 - Unplug it
15 - So now the phone stills off , on sp flash tool click download
16- Plug your phone and wait few seconds
17 - the flashing should start
18 - if all go well you could see a green arrow on the program
19 - now untick recovery
20 - tick boot
21- click on location and find your custom boot.img
22 - and flash it the same way as recovery.img
23 - Now as a said before if you have downloaded SuperSu direclty in your phone , just turn it on by pressing power + volume UP
24 - You should see a little menu , use volume up to choose recovery and volume down to confirm it
25-TWRP should appear
26 - Put the otg cable on your phone and plug a mouse on it
27 - you should get a message asking to modify system , with the mouse slide to authorize
28 - after that click on install
29 - choose the superSU.zip where you download it
30 - slide to flash it
31 - Reboot and you should get rooted
32 - Enjoy
TO RESTORE YOUR IMEI'S :
You need :
-PC
-The Program
-The Stock room you downloaded before
- The drivers
- The box of your imei's
Let's go :
0- Download the program
http://www12.zippyshare.com/v/UafLqKD2/file.html
Important be sure to download PDANET it will solve alot of problems with the drivers !!
1- Start the program
2- Go to help about sn and check that you have a new version mine is : 1.1604.00
3- Comport : select USB VCOM
4- Target Type : Select SmartPhone
5- click on system config
6- tick imei and dual imei ( if you have 2 imei's else tick only imei )
7- click on MD1_DB and choose a file in your stock rom that the name start like this :
MDDB_InfoCustomAppSrcP_MT6797_S00_MOLY_LR11_W1603_MD_MP_V62_4_P3_1_ulwctg_n.EDB
Be sure to check that and the end of the file is a .EDB
8- click on AP_DB and choose a file in you stock room that the name is start like this :
APDB_MT6797_S01_alps-mp-n1.mp9_W17.18
Be careful you stock room can contain to files choose the one that end with a number and not with a ENUM
9 - click on save
10 - power off you phone and disconnect it from the pc
11- press start
12 - put you imei's
13 - press ok
14 - connect your phone
15- if it's all okay you should see a message with passed on it ! IF it fails try again one time because my firts time failed too
16 - After getting the message passed , disconnect your phone and turn it on !
17 - You should get your imei's back !
18 - ENJOY !!
Credits :
Annubiis : For helping with my phone.
RAMANDEEP SINGH from androidweblog.
dodos from bbs.elephone .
If it helped you click on say thank's and if you need help comment this post !
Thanks alot bro it worked for my lenovo k8 plus dual sim phone...... and also PdaNet is must i understood.....
Redmi note 7 pro working ?
Mine is Samsung m10s, exynos, latest version Android 11. Do u think it will woerk on my phone, actually my phone says imei NG status and I'm unable to make calls, mobile data or sms. Please help me
Related
hey can anyone help me in rooting my phone Micromax A110
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
maddyrokieasta said:
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery and Sotck ROM provided by OP
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device.
6) Now connect your phone, with portable media option selected in USB. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in). You will see for a shot time that charging icon will appear on phone and disappear
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) To confirm this again, go to system manager and look for MTK 6577 something ... something...
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the Scatter loading file from Stock ROM folder
15) Click Firmware download / upgrade
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
17) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
18) RED Bar -> Yellow Bar -> Green Ring ( this process of flashing the entire new stock ROM should take not more than 2 - 3 minutes )
19) Disconnect
20) Reboot
21) You are on new Update
The same procedure you can apply for flashing the CMW / TWRP Recovery. Or if you do not want to re-do the procedure, simply replace the stock recovery.img with TWRP / CMW / LEWA recovery.img whichever you like; in this way you do not repeat the process of flashing custom recovery
I believe you must have the idea how to flash the Super user after this in case you wana root your phone.
Hit thanks if i helped
Sent from Micromax A110 ( Canvas 2 )
Click to expand...
Click to collapse
can you give me the drivers
poran123 said:
can you give me the drivers
Click to expand...
Click to collapse
That method is not for rooting....
It is installing ROM
Go to this link
Or Better go thru this thread all things for a110
Sent from my A110 using xda app-developers app
hello every one... i had this problom and i fixed it, i see lots of peeple having this problom
i hope this saves some one else's 3 day of life !!!!!!! My phone was MT6572
"" MTK ONLY ""
Your device doesn't detect simcard?
you flashed your phone and it can't connect to gsm networks?
is your phone stuck on airplane mode and you can't tun air plane mode off??
you can't change imei?
in MTK Droid tools you get these errors??
Baseband v: -----
and even when you root your device you get this error?
--- ERROR : pttycmd1 device NOT found!
you get this error in IMEI&SN write tool?
Enter to ModemMeta Fail
there is no CMS menu in unclemobile tools?!!
i had this problom before... and i spend 3 days on it !!!
first of all you need to have all of the MTK drivers!
i have links to some of them...
http://www.4shared.com/get/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
CDC drivers! http://www.4shared.com/get/-7DgNbgM/Android_Mtk_CDC_Driver.html
if you need a driver just search in google !!
You need this programs too "windows"
SP FLash tool (last version) http://forum.xda-developers.com/showthread.php?t=2650125
MTK Droid Tools & Root (last version) http://forum.xda-developers.com/showthread.php?t=2160490
And you need your phones "secro.bin" file ! its so tiny...
i will attach my mobile secro.bin file in compressed format! "MT6572"
sorry my net speed is very low, i can't upload step by step movie or other things...
so .. when you installed all of the drivers and apps you must be ready to go!
1-open the SP Flash tool...
2-select your phones "Android_scatter.txt" file (it's in the offical flash file "rom" for your phone)
if you'r phone boots up ok skip to the 6
3-Format your phone "WARNING!! DON'T FORMAT BOOTLOADER"
3.1 press start
3.2 turn off your phone
3.3 press start
3.4 connect your phone
3.5 wait for the process to compleate
3.6 remove USB cable from the phone
4- Go in download mode
4.1 load the scatter from offical flash (you already did i think?)
4.2 Press start
4.3 turn off your phone
4.4 connect usb cable to your phone
4.5 wait for the process to compleate...
4.6 remove the usb cable
5- if you want to do something with the mount screapt or ect... its for the best that you do it now
6- in SP flash tool uncheck every thing
6.1 check SEC_RO
6.2 click on the location area of the SEC_RO
6.3 select your own SECRO.bin or NODL_SECRO.bin
6.4 click download
6.5 turn off your phone
6.6 connect your phone usb to pc
6.7 wait for the process to complete
7- boot up your phone. you can now aces to GSM/WCDMA/LTE or ect... networks but your imei is invalid !
here the things now you can do that before you couldn't do:
8- go to MTK Droid tools and root
now you can see Baseband v is not empty
Root Your Phone if you didn't
9- Select ROOT in MTK TOOLS
10-in your phone allow super user or super su
when the light in the app turned green you are ready to pull the new imei to your phone
"its for the best that you use an old phone imei"
select IMEI/NVRAM
insert the new imei(s) and ok....
10- reboot your phone and see the imei *#06# it is ok now :victory:
if i helped you press THANKS :good: button
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
madalyn17 said:
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
Click to expand...
Click to collapse
1-thanks
2-i dont know ur phone, if i know i could help you
if ur problem didnt solve, give me details and i will help u
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Mr.Ak said:
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Click to expand...
Click to collapse
Flash the secro.bin file with sp-flashtoo, that shuld fix it. If the secro.bin file i did upload didnt work for you find the one that is for your device in its backup (from backup that u take from ur device before) or flash files for sp-flashtool (from internet)
Sent from my SM-G360H using XDA Forums
thank you very much
genius method !!
a google search brought me back here, and now i see.. my english was pretty terrible back then.
it works?
HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated
@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment 3851592
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..
[tutorial]
Unbrick a Mya-L23 Huawei.
Hi recently I got my hands on a Mya-L23 and I thought it would be very good to use as a In Car Waze, so since I use a tasker app for this I needed root, so I did a booboo, rooted it wrong and ended up with a VERY nasty bootloop ( I even did open it to remove the batter ) , however I was able to recover it and see that it was almost unbrickable.
The Chip inside a Huawei Y5 2017 is basically a MT6737T so thankfully there's a tool we can use to write directly to the chip ! ( YAY ) it's called Smart Phone Flash Tool ( SP tool ) , so basically we are going to overwrite the whole phone so we have a new and fresh install.
- tools:
you are going to need:
SP tools
you can get them from here ( 2019 )
https://aiomobilestuff.com/download-sp-flash-tool-newest-mt6752-mt6732/
https://spflashtool.com/download/
( very handy troubleshooting page for this software https://www.gizmoadvices.com/fix-sp-flash-tool-stuck-0/ )
MT65XX USB VCOM
https://mydevfiles.com/download/mt65xx-usb-vcom-driver/
Rom *this oneworked for me*
filename: Huawei_Y5_2017_MYA-L23_(Maya-L23C469B127)_by_(FirmwareOS.com).zip
https://androidfilehost.com/?fid=11410963190603900863
you can look for other roms here:
https://firmwareos.com/category/huawei/page/2
https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=14554
The ROMS ARE HUGE !!!!!!!!!
- How to do it.
1- Install the MT drivers
2- Open the rom ( unzip it )
3- locate the "download agent file" ( this is a file that will tell SPtool what will be downloaded )
in the rom I used it was called: DA_SWSEC.bin and it was located in a folder called download agent
4-locate the scatter loading file ( inside the firmware folder of the rom ) , this is a text file in my case it was: MT6737T_Android_scatter.txt
5- Now open the SP flash tool
6- Press the download tab
it will have a screen with 3 things you can write, go to where it says: "Download agent" click on choose , and add the the download agent file you identified before
7-Load the scatter loading file, pressing on choose on the second choose button, if everything is ok it will read a lot of files, and will take like 10 minutes or so... be patient
8-you will see below this a select list that says:
Download Only, Firmware upgrade, format all + download
for now select: Download only, if it fails, try Firmware upgrade, if that fails, then Format all + download
8-WITHOUT THE PHONE CONNECTED TO THE PC PRESS the Green Download button on SP tool
9-Hold the VOL DOWN button on your phone ( even if it is on a boot loop )
10-Insert a USB cable from the PC to the phone, keep the VOL DOWN BUTTON PRESSED until it starts showing a yellow like , then the rom will be written to your phone. ( after this most likely it will be alive again )
11- Profit !
---------------------- Do all of this at your own risk ----------------------
Most likely this will work with other y5 or even other phone models with the right rom and download agent...
Have a nice day !
XDA:DevDB Information
Fix BootLoop Unbrick MYA-L23 , Theme for the Huawei Y5 (2017)
Contributors
chuby007
Version Information
Status: Testing
Created 2019-10-24
Last Updated 2019-10-24