Related
Hello, i purchased android phone called FG8 (Fly Ying) and wifi wont connect sometimes or its stuck on ip, works on some routers and not on majority so i am looking for custom ROM to fix this if its possible.
Does anyone know any roms that are compatible with these devices here are specs:
CPU: Mediatek MTK6516 416 MHz processor
Baseband: MAUI.10A.W10.48.MP.V5.F1, 2011/01/27 16:48
Kernel version: 2.6.32.9
Build number:
ALPS.10Y.W10.48.MP.V1.06.2.04
Thank for help in advance am killing my self to find rom on net for this junk.
Replace your router or AP.
FG8 Wireless is stable with other routers.
All FG8 phones has same MAC!
Is there official firmware download page i think i messed up my firmware and if i do fac reset it remains the same?
wizzardz01 said:
Is there official firmware download page i think i messed up my firmware and if i do fac reset it remains the same?
Click to expand...
Click to collapse
I have messed mine too. I've talked to the people who sold it to me, and they have replied they are going to talk to the manufacturer to see if we can get the firmware and the needed update cable. I'm expecting a reply tomorrow. If I get the firmware and the instructions and tools to flash it, I'll post again.
firmware
hi, i've the same phone and i asked for the firmware....
they sent me this link, but i don't have any idea/instruction in what i've to do in order to flash it to my phone (maybe we need another cable?),
i hope somebody can figure out how to use it (and maybe explain what i've to do...)
sorry but i can't post the link, it's inside the attached file
Where does one get the 65xx Android Phone USB drivers?? Can't seem to find any on the web
oxyre said:
hi, i've the same phone and i asked for the firmware....
they sent me this link, but i don't have any idea/instruction in what i've to do in order to flash it to my phone (maybe we need another cable?),
i hope somebody can figure out how to use it (and maybe explain what i've to do...)
sorry but i can't post the link, it's inside the attached file
Click to expand...
Click to collapse
It's easy, open the txt file with notepad and look for "HYPERLINK" into the document. You'll see a multiupload link after it.
Is it possible to install WM 6.5 on FG8 android ??????????
if it possible which rom ????????????
Another ROM:
http://www.megaupload.com/?d=TILCY50P
NOT TESTED BY ME!
reinstall android 2.2 OS
well ,i get FBI antipracy notice or somthing
so, i ask the question again
can i reinstall the android 2.2 on this phone ,im having problem with the VOICE SEARCH , it give the errors ,how can i get rid of this app or make it to work
Try this ROM:
http://www.multiupload.com/T5HANXLGAO
Instructions:
1- Turn off the phone
2-Connect the phone to PC and install the driver. “Driver - USB VCOM Driver (binary)4”
3-Disconnect the phone from PC.
3- Open: ..\FG8 Android 2.3.1 with tools\SP Flash Tool exe_v1.1052.03\Flash_tool.exe
4- Connect the phone to PC and quick select in Flash_tool the COM port (you have seconds).
5.Click menu “file“ to choose “Open download agent file”, choose “MTK_AllInOne_DA.bin”; Then click menu “file“ to choose “Open Scatter-Loading Files”, choose “MT6516_Android_scatter.txt”;
6. Take off “PRELOADER” from de list.
7. Disconnect and connect the phone to PC.
8. Quick, after the sound Windows makes when something have been connected, press F9 or click "Download", don't worry the phone will keep connected until the process finish.
9. Power the phone (that will take some time).
you will have now custom recovery, too.
netomx said:
Try this ROM:
http://www.multiupload.com/T5HANXLGAO
Instructions:
1- Turn off the phone
2-Connect the phone to PC and install the driver. “Driver - USB VCOM Driver (binary)4”
3-Disconnect the phone from PC.
3- Open: ..\FG8 Android 2.3.1 with tools\SP Flash Tool exe_v1.1052.03\Flash_tool.exe
4- Connect the phone to PC and quick select in Flash_tool the COM port (you have seconds).
5.Click menu “file“ to choose “Open download agent file”, choose “MTK_AllInOne_DA.bin”; Then click menu “file“ to choose “Open Scatter-Loading Files”, choose “MT6516_Android_scatter.txt”;
6. Take off “PRELOADER” from de list.
7. Disconnect and connect the phone to PC.
8. Quick, after the sound Windows makes when something have been connected, press F9 or click "Download", don't worry the phone will keep connected until the process finish.
9. Power the phone (that will take some time).
you will have now custom recovery, too.
Click to expand...
Click to collapse
didnt understand the step 6 ,from which list ??????
when i click download it ask me '' open flash bin before download ''??????
seems like the files are incomplete ,no good
mastmalang70 said:
seems like the files are incomplete ,no good
Click to expand...
Click to collapse
Have you even try it?? It seems you don't.
okay ,i think i have found the problem ,when i connect my device ,installing driver ,that goes fine ,suppose i get com port 4 , when i open the flash tool ,reconnect the device the flash tool doesnt give me that port to read the device ,
it gives like com 3, com 5, till com 10
but always hide the no my device is connected ,
this i tried on my laptop running win7 64 bit and other pc running win7 32 bit
now what ????????
mastmalang70 said:
okay ,i think i have found the problem ,when i connect my device ,installing driver ,that goes fine ,suppose i get com port 4 , when i open the flash tool ,reconnect the device the flash tool doesnt give me that port to read the device ,
it gives like com 3, com 5, till com 10
but always hide the no my device is connected ,
this i tried on my laptop running win7 64 bit and other pc running win7 32 bit
now what ????????
Click to expand...
Click to collapse
Well, if you didn't noticed, the com port will be available JUST FOR A FEW SECONDS... prepare the software, and then, connect the cell phone... the port will be available just for a few seconds
sorry but this is not working with me
thanks for the help
mastmalang70 said:
sorry but this is not working with me
thanks for the help
Click to expand...
Click to collapse
Why not? try opening device manager and then connect the cell phoen.. check if you need drivers
......................
...................................
I found the tutorial on Facebook. Took a risk for testing . Modified a bit to suite our needs. Credit goes to original developer.
If procedure not followed properly, it may brick your phone. Go ahead with your own risk.
Requirements: Win XP or Win 7 (all tools set to Win Xp Sp3 Compatibility & Run as Admin), Battery atleast 60%.
Required Files:
Karbonn Drivers Download
Roadkill Download
EMMC Downloader Download
QUALFAST Download
IMEI Writer Download
JB Root Download
AP Firmware Download Part1
Download Part2
BP Firmware Download
Use Driver Signature Enforcement Overrider,from attachments, in Windows 7 to enable test mode and install drivers without any problem.
Credits: Ako si Opaw, strik3r
Procedure
1.Backup your ICS using Roadkill
Turn off your Flare, then press Volume down and power button at the same time. once you see the “ENTRY QPST DOWNLOAD”, open roadkill and click on Store Image Tab, select the disk with 3.61GB, click browse and select the location where you want your backup to be saved, and click start. Once finish proceed to next step.
2. Saving IMEI, MAC ID and Serial Number
Write your IMEI1, IMEI2, Wi-Fi Mac, and Serial Number (S/N) in a piece of tissue paper. For MAC ID, turn on your Wi-Fi, and go to Settings > About Phone > Status. For IMEI just dial *#0000# in dial pad.
3. Backup NVRAM
Run EMMC_DownLoad_V1.2.3.exe ,(Check Download Boot Loader for 1st run)
Turn device ON (make sure USB Debugging is enable)
Connect phone thru microUSB cable (Note: Make sure there are no other USB Modem or phone connected to your computer except for Flare)
Click BackUp_NV.
Wait until back up is successful.
4. Download BP Firmware
Go to ENTRY QPST DOWNLOAD” Mode (Power + Vol Down)
Run EMMC_DownLoad_V1.2.3.exe. Click SELPATH select “BP Firmware” Folder.
Connect phone thru a microUSB cable.
Check Device Manager for "Qualcomm HS-Usb Diagnostics 9006" Com Port #.
Look for "Qualcomm HS-Usb Diagnostics 9006" type the Com port # in EMMC Download Box. Click Download.
Wait until download is successful (Usually it takes 6-12sec). Remove battery. (Do not Close EMMC Download. then proceed to next Step )
5. Download AP Firmware
Run QUALFAST2.0.5.exe. Click SELPATH, select AP firmware (“Stock JB Rom” Folder), Check Format Card & Userdata
Go to Fastboot Mode or Green Screen Mode (Power + Vol Up)
Click OK to start download then connect phone via a microUSB cable.
Wait until download is successful. Remove battery.
6. Restore NVRAM Backup
Run EMMC_DownLoad_V1.2.3.exe.
Turn device ON. (make sure USB Debugging is enable)
Click Restore_NV. Browse and select bak.qcn file. Connect phone thru microUSB cable.
Wait until qcn restore is successful. (your IMEI 2 is Null & Wifi Mac Address is set to default. you need to write it again)
7. IMEI & Wi-Fi MAC Address Writing
Turn device ON (make sure USB Debugging is enable)
Locate your modem com port number (Go to Device Manager > Right-click “Tianyu HS-USB Android Modem 9025” > Properties > Advanced Tab > Advanced Port Settings > COM Port # (Ex. 10))
Open Qualcomm_Modem_Tools_V1.1.2.exe and type com port #
Write all your backup code, then click Write button. (In my case I have re-entered my IMEI1, IMEI2, S/N (Serial Number), Wi-Fi MAC)
Note: Every after successful entry of IMEI, the phone automatically restarts.
8. Rooting
Restart Device. Wait until it boot perfectly.
Copy update.zip to internal memory.
Reboot to recovery and update from internal sdcard.
Reboot
Enjoy.
Reserved one more.......
Hey, Can you help for Karbonn A21 too?? I mean can you change the ramdisk?? And provide a boot.img! Jelly Bean is booting but White screen problem. So I think we've to change the ramdisk of KA9 with the ICS Karbonn A21!! Please do the necessary changes and provide a boot.img??? Please
Sent from my HTC Explorer A310e using xda premium
Hey dude the official update of jelly bean for flatter has started rolling out. I was wondering if you could somehow get tort hands on it soi that even a15 and a21 users can benefit.
Sent from my A15 using xda app-developers app
Minimilised_MR said:
Hey, Can you help for Karbonn A21 too?? I mean can you change the ramdisk?? And provide a boot.img! Jelly Bean is booting but White screen problem. So I think we've to change the ramdisk of KA9 with the ICS Karbonn A21!! Please do the necessary changes and provide a boot.img??? Please
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Dude kernel is device independent... ramdisk is folder positioning
Hey guys I got a very strange problem.
I successully updated my a9+ to jelly bean, which worked for 3 days. Suddenly while charging my phone, it died. I saw the phone charge upto 93% and when checked later it was turned off. I tried to turn on the phone, fastloader and qpst download entry mode... nothing worked... I thought that there was some hardware malfunction..
Then I tried connecting the dead phone to PC and a device under Qualcomm HS-USB QD Loader 9008 got installed. I search google and came to know about tutorial where you could flash bootloader thorough QPST (Qualcomm Product Support Tool). I followed the tutorial but i received error "Cookie not available", which according to tutorial is not solvable.
I don't know the cause of this problem... Maybe it was eMMC internal flash failure without any fault on JB update... Or something that happened due to jelly bean update process and incompatiblity of the firmware with a9+..
Now my question is:
1. Is my phone eMMC flash damaged physically beyond any repair?
2. Or the service center guys can still access my eMMC flash and repair it?
3. If eMMC is damaged, can it be replaced or the entire board needs to be replace?
It is not job fault. Emmc died. You can get replacement/repair as there is no way to know that u flashed job .
Sent from my SGH-T989 using Tapatalk 4 Beta
Waiting for karbonn to get jellybean
Sent from my Nexus S using xda app-developers app
kornholic said:
Hey guys I got a very strange problem.
I successully updated my a9+ to jelly bean, which worked for 3 days. Suddenly while charging my phone, it died. I saw the phone charge upto 93% and when checked later it was turned off. I tried to turn on the phone, fastloader and qpst download entry mode... nothing worked... I thought that there was some hardware malfunction..
Then I tried connecting the dead phone to PC and a device under Qualcomm HS-USB QD Loader 9008 got installed. I search google and came to know about tutorial where you could flash bootloader thorough QPST (Qualcomm Product Support Tool). I followed the tutorial but i received error "Cookie not available", which according to tutorial is not solvable.
I don't know the cause of this problem... Maybe it was eMMC internal flash failure without any fault on JB update... Or something that happened due to jelly bean update process and incompatiblity of the firmware with a9+..
Now my question is:
1. Is my phone eMMC flash damaged physically beyond any repair?
2. Or the service center guys can still access my eMMC flash and repair it?
3. If eMMC is damaged, can it be replaced or the entire board needs to be replace?
Click to expand...
Click to collapse
I posted another thread for reviving the phone. Make sure u are on WinXP.
Sent from my SGH-T989 using Tapatalk 4 Beta
3rd step not working for me... says Backup -nv failed
and can u make a zip file which can be flashed.... would be of great help for a lot of people.... but still great work... keep it up
+1
Same here.
Is there any comport issue?
Sent from my Nexus S using xda app-developers app
Issue fixed now.
Just manually install karbon drivers first to creat a comport.
Arun you should add that step to your procedure for jb update.
I successfully update it and working awesome
Sent from my S100 using xda app-developers app
i have karbonn A111 and same configuration to karbonn a9+
can i try to update using following method?
its also qualcomm 1.2 dual core, 512 ram
display is litle bigger
what u say ? can i go for it or it will go dead
sam1skhan said:
i have karbonn A111 and same configuration to karbonn a9+
can i try to update using following method?
its also qualcomm 1.2 dual core, 512 ram
display is litle bigger
what u say ? can i go for it or it will go dead
Click to expand...
Click to collapse
since the display is bigger you may have to replace some library files..
i seen some tutorial ,, still new to it. and committed to learn .
can u tell which library , or put a link for referance
thank you
br
skhan
(i done backup with roadkill n qcn backup is there for me)
thank you for the post. not facing any issues and my phone works better now and very happy with the procedure provided by you.
I didn't get u? what does karbon drives have to do with Backup_nv? Please can u explain the step properly
---------- Post added at 12:05 PM ---------- Previous post was at 12:03 PM ----------
leecorp said:
Issue fixed now.
Just manually install karbon drivers first to creat a comport.
Arun you should add that step to your procedure for jb update.
I successfully update it and working awesome
Sent from my S100 using xda app-developers app
Click to expand...
Click to collapse
I didn't get u? what is the connection b/w karbonn drivers and bavkup_nv?
Can u explain the steps in detail?//
It's not concern with backup_nv it requires you to when you install bp firmware and further steps. It requires comport.
Sent from my S100 using xda app-developers app
leecorp said:
It's not concern with backup_nv it requires you to when you install bp firmware and further steps. It requires comport.
Sent from my S100 using xda app-developers app
Click to expand...
Click to collapse
i downloaded karbon drivers from first post but can u tell me how to install them.
why is backup_nv is failing.... what is comport & how to get/do it?????
the com no. showing is 254... should i change it... if so where can i get correct no.
Follow this guide carefully and you can revive your dead Karbonn A9+/ CM Flare after Jelly Bean Upgrade.
Tools Needed:
Dead Phone (When u connect to PC it should install Qualcomm HS-USB QD Loader 9008 Driver) Link
QPST.2.7.399 Link
Flare Revival kit Link
PC with 32 bit Windows (XP/Vista/7/8) (64bit casus problem in QPST installation)
Credit goes to jhanra for the tutorial as well as CWM 6.0.1.1 for JB ROM . :good:
Procedure
Connect ur phone to PC and let the driver install
Install QPST
Open QPST Configuration (in Win XP compatibility mode) ->Add new port -> Select the com port of your device ->exit.
Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port
Extract Flare Revival Kit on desktop
If Phone is not detected , Click Browse
In flash programmer file name type MPRG8X25.hex -> in Boot Image type 8X25_msimage.mbn in SPC ->000000
Click Load XML def and browse for rawprogram0.xml in Flare Revival Kit
Click Load Patch def and browse for patch0.xml
Check the search path 2 and browse for the folder flare repair files
Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
From here you can updating your rom to jelly bean using this tutorial Link
Guys, anyone encountering "Cookie (if present) not received" error after clicking on Download button?
My Karbonn A9+ as successfully updated to jelly bean, which was working flawlessly for 3 days. But suddenly it died while my charging my phone.. The phone could not be turned on, no fastloader or entry download mode.... However when connected to PC it was being detected as Qualcomm HS-USB QD Loader 9008. I tried this tutorial but am facing cookie not received error.
Since my phone died suddenly, not during any update firmware process... I suspect this could be case of Sudden Death Syndrome (SDS) which means my eMMC flash (internal storage) got corrupted and is not being able to recoginized by QPST tool.
Has anyone faced this problem?
kornholic said:
Guys, anyone encountering "Cookie (if present) not received" error after clicking on Download button?
My Karbonn A9+ as successfully updated to jelly bean, which was working flawlessly for 3 days. But suddenly it died while my charging my phone.. The phone could not be turned on, no fastloader or entry download mode.... However when connected to PC it was being detected as Qualcomm HS-USB QD Loader 9008. I tried this tutorial but am facing cookie not received error.
Since my phone died suddenly, not during any update firmware process... I suspect this could be case of Sudden Death Syndrome (SDS) which means my eMMC flash (internal storage) got corrupted and is not being able to recoginized by QPST tool.
Has anyone faced this problem?
Click to expand...
Click to collapse
Please state your OS Win XP or 7. Try using 32 bit win XP PC.
arunmcops said:
Please state your OS Win XP or 7. Try using 32 bit win XP PC.
Click to expand...
Click to collapse
My os is windows 7 32 bit.. i tried running emmc downloader with windows xp compatibility mode also. same problem.
kornholic said:
My os is windows 7 32 bit.. i tried running emmc downloader with windows xp compatibility mode also. same problem.
Click to expand...
Click to collapse
QPST caused me problems with Win 7. I used win XP.
arunmcops said:
QPST caused me problems with Win 7. I used win XP.
Click to expand...
Click to collapse
Tried it on Win XP... same cookie(if present) not received error showing..
can we use vmplayer for the win xp or other virtual soever instead? i use win 8 64 bit that's why it won't able me to download and shows me the message that the cookie (if present) is not received. :angel::angel::angel:
Some from a chinese forum was able to fix the cookie problem through QFPROM Fuse..
http:// lepad.it168.com/thread-2920933-1-1.html
(its in chinese)
What does it mean?
kornholic said:
Some from a chinese forum was able to fix the cookie problem through QFPROM Fuse..
http:// lepad.it168.com/thread-2920933-1-1.html
(its in chinese)
What does it mean?
Click to expand...
Click to collapse
Only explanation given is that This problem is related to specific PC.
arunmcops said:
Only explanation given is that This problem is related to specific PC.
Click to expand...
Click to collapse
Yes the person in one post first said the problem is due to PC and driver combination. However, in later post has also said:
"i am still stuck in download mode. i was able to programm the bootloader, as i mentioned before by using QFPROM Fuse, everything else leads to errors. only one little detail changed -> when i press the power button it vibrates shortly.when i try to porgram the mmc device i always get no response from the phone."
Some of the points to ponder are:
1. He said he was able to program bootloader using qfprom fuse.
(How did he program bootloader through qfprom fuse, what does this mean?)
2. When power button pressed, there is vibration...
(On my device there is no response when pressed on power on.)
3. However he later said when he tries to program mm, he gets no response.
(He has not said he gets cookie error, just not response... could be anything)
one of the moderator of cherry flare group at facebook was able to revive phone from cookie error.
check http://www.youtube.com/watch?v=qHQIIsqV1Zw
i just found out that you can restore your phone too by using roadkill, if you had written the backup of the image of your phone lately. :angel:
heyyanyan said:
i just found out that you can restore your phone too by using roadkill, if you had written the backup of the image of your phone lately. :angel:
Click to expand...
Click to collapse
yes, if you could access entry qpst download mode (vol down + power)... however if you are hard bricked... you would not be able to access that plus your phone would not turn on in any manner.
in my case, my phone didn't turn on no matter what i do. but if i connect my phone to the pc, it shows the qualcomm hs-usb something that can be read by roadkill.
heyyanyan said:
in my case, my phone didn't turn on no matter what i do. but if i connect my phone to the pc, it shows the qualcomm hs-usb something that can be read by roadkill.
Click to expand...
Click to collapse
did you manage to fix your phone?? ......................................................
arunmcops said:
Connect ur phone to PC and let the driver install
Install QPST
Open QPST Configuration (in Win XP compatibility mode) ->Add new port -> Select the com port of your device ->exit.
Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port
Extract Flare Revival Kit on desktop
If Phone is not detected , Click Browse
In flash programmer file name type MPRG8X25.hex -> in Boot Image type 8X25_msimage.mbn in SPC ->000000
Click Load XML def and browse for rawprogram0.xml in Flare Revival Kit
Click Load Patch def and browse for patch0.xml
Check the search path 2 and browse for the folder flare repair files
Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
From here you can updating your rom to jelly bean using this tutorial Link
Click to expand...
Click to collapse
!!!
!? I just Ported CWM 6.0.1.1 to CM Flare Jelly bean (for JELLY BEAN ONLY)!! !!!! I Already test it with my own 3pcs CM FLARE phone with no problem! In porting this CWM my 2 phone died porting this CWM but I recover it WITH THIS METHOD you posted!!!!!!!!!!!!!!
FLash this with AIO FLASHER
check recovery erase then flash
View attachment 2089726
theres nothing it can do if you try it? it cannot mess your phone!
!!!
this is the full tutorial for this! View attachment 2089809,
and this is the file for this case!
h ttp://www.4shared.co m/rar/rzVTMMxY/flare_repair_files.html
after this you can flash BP firmware in this! follow the tut in flashing BP Firmware and so on
to upgrading in jelly bean BY ARUNMCOPS! here ht tp://forum. xda-developers.com/ showthread.php?t=2330823
the original thread is here ht tp://www.pinoy den.com.ph/inde x.php?topic=274677.0
Note: just erase the spaces of the link!
you can try the steps on my tut but DO THIS AT YOUR OWN RISK!!!
!!!!!!
[email protected]@@
[MENTION=1065870 [user=1879310]@@@@[/user][/MENTION]
@@@
kornholic
@@@????
Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
@bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?
REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.
Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421
NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.
viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?
girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.
ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.