how to root micromax a80
Calling All experts... please tell us how to root Micromax A80
Dear all expert team members... Please let us know how to Root Micromax A80
it is highly needed.
Try Gingerbreak,and if that doesn't work,try this http://forum.xda-developers.com/showthread.php?t=1697248 or unlock root.All of these are for different phones,so adapt accordingly and keep in mind that it might not work.
Rooting & recovery mmx a80
first off all you need to download txt file in attachments download file form link where i provided in txt file
1.connect phone USB DEBUG mode
2.search for device manager
3.find you'r device right click on it after that click on driver tab
4.update driver choose browse my computer
5.let me pick bla bla after that click on have disk
6.browse to drivers/vcom drivers/
7.after that switch off you'r phone and start sp flash tool load scatter file in sp flash tool/android
8.tick recovery and bowse to CWM.img connect phone without battery click on download in flash tool and insert battery
9.after finish download disconnect phone hold pwr+ vol up and install zip from sd card and select superuser zip
Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
@bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?
HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST
Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!
Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA
Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share
Hi good day to all am RJ am going to guide how to ROOT / FLASH RECOVERY in Micro max Canvas A111 jb4.1.2
WARNING: If your Micromax Canvas A111 smartphone gets bricked or gets damaged while following the tutorial given below, we shouldn’t be held responsible. Proceed at your OWN RISK.
I will try to keep this guide up to date. Please let me know if you find something wrong or missing
Content:
1) Introduction
2) How to root
3) How to flash recovery
4) FAQs (ADB, Loki, Download Mode, Go to Recovery etc.)
5) Troubleshooting (unbricking)
1) Introduction:
Micromax Canvas Doodle a111 is a 3G Android smartphone with a 5-inch TFT HD Touchscreen display. The phone is powered with 1.2 GHz Quad-Core Processor and it runs on Android 4.1.2 Jelly bean OS. With 8 mega pixel rear view camera, the phone offers high quality image capturing. If you are looking for a smartphone under 10000 INR with good features, then Micromax Canvas A111 would be the ideal choice!
If you are a user of Micromax Canvas Doodle a111 and would like to gain root access for installing rooted apps or custom ROM’s, then the following tutorial will help you. I have given step by step instructions for rooting A111 smartphone below
2) How to root:
Prerequisites To Root Micromax Canvas A111 Smartphone1. Take complete backup of your personal data in the Micromax device using appropriate apps. Although the root process won’t affect them, its safe to keep a backup.
2. Remove all the Antivirus applications installed on your smartphone for virus protection since sometimes they will cause trouble while the rooting process is going on.
3. Charge your phone battery and keep its backup level above 80% as the rooting process drains the battery. If you don’t have enough battery backup and your device gets switched off during the rooting, then surely it will get bricked. Avoid it by having a good battery backup.
4. ***Enable USB Debugging mode in your device by following the path: Settings -> Developer Option -> USB Debugging.
5. *** Make sure you have drivers for your phone Download from here http://www.androidrootguide.com/micromax-usb-driver-download-get-drivers-micromax-smartphones
Once you have done all the above mentioned tasks, you can move on to the rooting tutorial given below.
download any one application from bellow links
1. For VROOT :: click here
2. For Root Genius:: click here
Tutorial To Root Micromax Canvas A111
> To get started, download VROOT / Root Genius from bellow link and install it on your computer. Once installed, open the application.
> Now connect your Micromax Canvas A111 smartphone to the computer using the “USB Debugging Mode”. If you have installed the required USB drivers for your phone on the computer, then the VROOT application will automatically detect your smartphone.
> Now just click on the “Root” button shown on the VROOT / Root Genius window and let the rooting process begin. The smartphone will get restarted several times during the process. So, don’t panic. Once the rooting process is finished, the device will reboot for one more time.
> Thats it. Now you have successfully rooted your Micromax Canvas A111 smartphone. If you want to confirm whether you have successfully rooted or not, use the “Root Checker” app. If you encounter any issues while following this rooting tutorial, do let me know via comments.
****** if u not able to understand the above please click on the Link it will more easy http://rjpraveen.blogspot.in/2014/08/how-to-root-micromax-canvas-doodle-a111.html
3) How to flash recovery:
To install ROM’s and Kernels you need a custom recovery already you learned how to ROOT Device from above information now its the time to use unlocked boot loader to your device k lets move through the part
and
to flash recovery no need root access don't bother if u are rooted or unrooted. if you are unrooted then also you can do it i provide both information for rooted and unrooted users
Things needed before flashing:
1. Proper drivers (see section 1)
2. ADB. There are various ways to get it but don't worry about size and installation i marked it small and easy
3. Required Recovery images(TWRP/CWM/STOCK & MIUI) provided link bellow.
4. Basic Knowledge on PC..
NOTE:: I am not responsible for bricked devices.
Download Recovery image files from billow links
CWM Recovery :: Download the img for your device here
TWRP Recovery :: Download the img for your device here
MIUI Recovery :: Download the img for your device here
STOCK Recovery :: Download the img for your device here
This Step for Rooted Users Only
Download Flashify from Google Play here
(before follow this step please ensure that your battery device has more 50% in case of out of battery during this process)
1) Use Flashify Application:
This program required Root Permission and it free with limited functioned that can install Custom Recovery 3 times a day. If need more please support dev.
2) Make sure you hit “Allow” when Superuser request window pops up when opening the Flashify app.
3) Choose “Recovery image” for recovery images like CWM or TWRP. (You could even flash stock recovery images and unroot btw.)
4) Next, choose the file you want to install by choosing “Choose a file”.
5) Choose one of the Recovery Download CWM or TWRP or OTHER but I recommended TWRP
6) Browse your storage and choose the IMG file you want to flash.
7) Choose “Yup”. That’s it!
if u want to See more Detailed Information with image presentation click here
This Step for Rooted/NON Rooted Users also
>>>> Download ADB Required files from here
if u want to watch video how to install click here
1> Enable USB debugging mode in ur device
for this(go to setting >> developer Options >> tick usb debugging)
2> Switch off your device and start it in ""fast boot"" mode
for this Switch off device after this
Hold (Volume down + Power Button) both at same time it will show canvas logo with top blue LED above sensor
that's it it means that now your device in fast-boot mode
3> Now connect your mobile to PC with the data cable it will automatically install drivers if not install drivers manually download from above section 1
4> Now get back to PC navigate to download folder it contains 2 folders
1.fast boot files and
2.Recovery Images
now copy recovery which one u want from "Recovery Images" folder to "fast boot files" folder
(stock -- default what MMX device provides)
(CWM/TWRP/MIUI Custom recoverys)
then rename the copied file with name "recovery"
5> Now open "fast boot files" folder at this time in keyboard hold "shift button and click right mouse button" at a time with in the folder
(don't select any file first just left click on white space then proceed "shift+right mouse click at a time")
6> with in this choose option "Open Command Window Hear" then type command
command is
Code:
fastboot flash recovery recovery.img
now it show to "okay" messages
now type command
command is
Code:
fastboot reboot
7> wait until Ur home screen available on device then disconnect from PC that it enjoy recovery
4) FAQs:
1. HOW TO CHECK WHETHER I ROOTED OR NOT ?
A. Don't worry there is a lot of options to check root access on of that is easy Download "Root Checker" from Google Play and follow procedure in app
2. WHEN FOR ROOTING I CONNECT DEVICE NOTHING PROCESSING ?
A. Install drivers Perfectly and check data cable
3. HOW TO ENTER FAST BOOT MODE?
A. Take Look its easy but small confusion is device started in fast boot mode or not when in fastboot mode its just showing blue led and logo and stuck at logo its enough device in fastboot mode
to switch on fastboot mode(Volume down + Power Button)
4. HOW TO ENTER INTO RECOVERY MODE AFTER INSTALL OR CHECK IT?
A. just Switch off device and press (Volume UP + Power Button) wait until it show recovery don't leave keys
5. HOW TO BACK UP EXISTING ROM?
A. just enter into recovery choose backup option that's it it will place folder according to Ur recovery in SD
5) Troubleshooting
a)Unbricking
If you are reading this you have a problem. Your phone has become a brick. But do not despair yet as there are a few ways to unbrick your phone. Let us first determine whether it is a soft brick or a hard one.
**Soft Brick: Basically it means your phone is bootlooping or showing a blank screen but you can still go to recovery/download mode. The easiest way to fix this (and determine if you have a soft vs hard brick) is turn off the phone and then press the volume up button and powerbutton (keeping vol up pressed). If you see recovery no problem flash stock rom
**Hard Brick: If you cannot enter download or recovery mode then you may have a hard-brick. This is not a fun situation to be in but there is a fix that may work. It involves lots of linux commands and is not for newbies but then if you are hard-bricked what have you got to lose.
Here is the guide done by ChinmaySharma to get back if u hard bricked
http://forum.xda-developers.com/showthread.php?t=2901983
For Video Review to Unbrick watch here in this link in you tube https://www.youtube.com/watch?v=35E21Vi_ddE
Enjoy New Tricks Don't put face like this if u got any stuck at any where just ping me ill make u like :fingers-crossed:
Hi I tried to flash one of your ROM and it displayed bricked cant help and when i reboot it stuck with boot image of canvas. can you please help me
hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out
thanks sir i am doing it right
I was not able to Flash my drive but becz i have taken Fast boot file from another place and recovery file from another place. But you did the right thing everything going right and i am able to install rom in my micromax A111. Thank you so much sir. I appreciate your hard work.
Bricked Your Unite 2??
Try Unbricking it in a DIFFERENT WaY.
So, Let's Start
You need these:
Bricked MMX UNITE 2(duh!)
USB Cable
PC(Windows 7)
Memory Card(size Doesn't Matter)
MTK USB Drivers(Attached)
ZIP flashable STOCK ROM(Go to needroms.com){you need to register to download ROMS}
SP flash Tool(Attached)
SuperSu(In case you Want to Root your Phone again)(Attached)
STEP 1.
Copy the STOCK ROM to the Memory Card.
STEP 2.
Extract all Files downloaded on the desktop.Open up SPflash tools and load the scatter file by clicking 'Scatterloading'.
select Recovery.img and boot.img .
STEP 3.
Click Download. Remove the battery of your device and connect it to your PC.
STEP 4.
The Progress Bar will Turn Red then to Purple and Finally Yellow.
You Will get a small window with a Green circle telling Download OK.
You Have successfully installed CWM Recovery.
STEP 5.
Disconnect the Phone,insert the memory card and Battery. Power ON the phone by pressing VOLUME UP+DOWN+POWER keys. It will Boot into CWM recovery.
STEP 6.
Select Install zip from SD card (Use volume and power keys For Browsing).Select the zip file and select YES.
Select Go back and Reboot system NOW.
You're Done!
HOPE THIS HELPS
:good: Don't Forget to Hit ThankZ If IT Did Help you :good:
progress bar stuck when it is red
wt can i do?
plz hlp!
thanks in advance.
Please help me ASAP.
I am trying to do as u said but it only goes on ok till step 4. After that it doesnt respond at all when i put the battery and memory card with only the zip stock rom file in it. please reply ASAP.