I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join
MICROMAX A115 CANVAS 3D complete development here
The mobile has released today itself but got root as well as CWM Now this is the first tutorial on internet.
Note : If any one will copy this tutorial in their blogs or website please give a link to this website please.
How to root micromax a115 CANVAS 3D click here
Method 1 : Root required Very easy
1. Download CWM recovery.img and recovery manager from HEREhttp://d-h.st/6AP now Copy CWM recovery.img in SD card keep in root of sd card not in any folder, now install the recovery manager.apk normally
3. Now open the recovery manager app
4. Click on recovery in app menu.
5. There click on install recoveryD
D COM
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your CWM recovery
Quote
SP Flash Tool method, root not required
1. Download MTK6577 Drivers.zip and unzip/extract on
your Windows PC, just run InstallDriver.exe to install
drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading
Agent. A new window will open.
Browse to the extractedCWMR 6.0.2.8 + scatter folder and select
MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see
multiple entries. Uncheck all entries
except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with
battery inserted + Press and Hold
Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
reserved
please attach cwm for a115 ...attach in this message as soon as possible
Android 4.2.2
Hey I want android 4.2.2 for canvas 3d can u help me
download mode problem
i did'nt get download mode in my celkon a115 mobile
Hello Guys,Am new In Xda And This Is my First Post. I am Going To Explain The Procedure To root Qmobile A65 Or any other MT6572 Device And Installing Cwm Recovery To instal custom Rom.I am Working On Windows 7.
First of all Download All the attached files.
~MtkDroidTools v2.5.3
~SP Flash Tool 3.1352.01 (5.1352.01)
~MT65xx Preloader Vcom Drivers
~Qmobile A65 Or your Device USB Drivers
=} First Of all Connect Your Device With Pc And Install The Device Drivers Downloaded And Extracted Earlier.
=} Turn Of Your Cell And Now Pull Battery Out Of the Cell Phone And Connect it With Pc Via Usb Cable/
=} Go To Device Manager,Now Put Battery Back In cell Phone,You will See MT65xx Preloader In Device List.
=} Right Click On it And Click Update Driver And Select The Mt65xx Preloader Vcom Drivers And Click Install.
=} Now Power On the Device And Open MtkDroid Tools And Create Scatter File.
=} Open Flash Tool And Load Scatter File Now Select Readback Tab And click Add.
=} Download Notpad++ And Open Scatter File In it.
=} Copy the linear_start_addr of Preloader And Paste It In Readback Block Start Add That Appear After Double Clicking The Line And Then
Saving The ROM_0.
=} Now Scroll Down And Find the Fat Partition In Notepad++ Copy Its linear_start_addr And Paste It In Length Click OK.
=} Click ReadBack Button And Connect The Phone Without Battery,Insert Battery Flash Tool Will Start Dumping Your Room.
=} It Will Take 40-50Minutes And Will Generate A file Of 2-3Gb.
=} Now Open Mtkdroid tools And Power on Phone,Go to root,backup,recovery tab and Click "to Process the Rom_from Flash tool.
=} Select the file ROM_0,It will Unpack The System Files And Ask you To Either you want to make cwm recovery or not,Select Yes.
=} Open Spflash tool And Load same scatter file And Go to Download Tab Double Click On recovery And Select The Recovery Img,
Do not Select factory_NON modified_recovery img.
=} Double Click on Bootimg And Select The _boot_patched_140614-084012.img file In the Same Folder As for recovery.
=} Check Both Recovery And Bootimg Boxes.Click Download.
=} Power Off Your Phone And Connect It with Pc.Download Will Start,And Install Custom Recovery.
=} Download Superuser.zip And Place it In root Of Sdcard,On the phone in Recovery Mood And Select Install Zip From Sd card.
=} Select superuser.zip And Follow The Directions To install it.
=} Now You Should Be Rooted And CWM Recovery Should Be Installed And You Can Install Custom Rooms.
If This Helped You Dont Forget To Thank,If you Need Help You Can Ask me.In My Later Posts I will Also Post Rooms For Qmobile A65 And MT6572 Devices
Here R Downloads
help with install of cwm recovery on blu dash 5.0
Can anyone help me.
Hi, I am trying to flash a cwm recovery for blu dash 5.0 ( a mediatek based device MT6572). There is no official cwm recovery for my device however I found a recovery on XDA developers that may work with MT6572 devices. Here is my phone info:
Model No.: BLU DASH 5.0
Android version: 4.2.2
Baseband ver: MOLY.WR8.W1315.MD.WG.MP.V1
Kernel ver: 3.4.5
Build No.: BLU-D410a-V08-Generic 17-10-2013.
I downloaded recoverycwm-evos7.IMG to my sdcard. When I went to my sdcard and clicked on it, I was automatically transferred into ROM installer app by jrummy with the option to to flash it. But before I did anything, the flash script read:
1 #!/system/bin/sh
2 ##########################
3 #
4 # flash recovery
5 #
6
7
8 # ERROR: cannot locate recovery partition.
How do I fix this? Please email me with any solutions or just reply Thanks. [email protected]
After this I need to find a custom ROM that can be installed or flashed on my phone because there is no official custom ROM yet.
This is one of the most useful topics I have seen for my mobile. I have tried everything to install CWM for my phone model (Champion Mobile NM850A), an unsupported device for Rom Manager's CWM downloader. searching for MT6572 Clockworkmod lead me to this topic and really helped me aswell as it can also help to people with different MT6572 devices. thank you!
i have also qmobile noir A65
HamzaKhalil302 said:
Hello Guys,Am new In Xda And This Is my First Post. I am Going To Explain The Procedure To root Qmobile A65 Or any other MT6572 Device And Installing Cwm Recovery To instal custom Rom.I am Working On Windows 7.
First of all Download All the attached files.
~MtkDroidTools v2.5.3
~SP Flash Tool 3.1352.01 (5.1352.01)
~MT65xx Preloader Vcom Drivers
~Qmobile A65 Or your Device USB Drivers
=} First Of all Connect Your Device With Pc And Install The Device Drivers Downloaded And Extracted Earlier.
=} Turn Of Your Cell And Now Pull Battery Out Of the Cell Phone And Connect it With Pc Via Usb Cable/
=} Go To Device Manager,Now Put Battery Back In cell Phone,You will See MT65xx Preloader In Device List.
=} Right Click On it And Click Update Driver And Select The Mt65xx Preloader Vcom Drivers And Click Install.
=} Now Power On the Device And Open MtkDroid Tools And Create Scatter File.
=} Open Flash Tool And Load Scatter File Now Select Readback Tab And click Add.
=} Download Notpad++ And Open Scatter File In it.
=} Copy the linear_start_addr of Preloader And Paste It In Readback Block Start Add That Appear After Double Clicking The Line And Then
Saving The ROM_0.
=} Now Scroll Down And Find the Fat Partition In Notepad++ Copy Its linear_start_addr And Paste It In Length Click OK.
=} Click ReadBack Button And Connect The Phone Without Battery,Insert Battery Flash Tool Will Start Dumping Your Room.
=} It Will Take 40-50Minutes And Will Generate A file Of 2-3Gb.
=} Now Open Mtkdroid tools And Power on Phone,Go to root,backup,recovery tab and Click "to Process the Rom_from Flash tool.
=} Select the file ROM_0,It will Unpack The System Files And Ask you To Either you want to make cwm recovery or not,Select Yes.
=} Open Spflash tool And Load same scatter file And Go to Download Tab Double Click On recovery And Select The Recovery Img,
Do not Select factory_NON modified_recovery img.
=} Double Click on Bootimg And Select The _boot_patched_140614-084012.img file In the Same Folder As for recovery.
=} Check Both Recovery And Bootimg Boxes.Click Download.
=} Power Off Your Phone And Connect It with Pc.Download Will Start,And Install Custom Recovery.
=} Download Superuser.zip And Place it In root Of Sdcard,On the phone in Recovery Mood And Select Install Zip From Sd card.
=} Select superuser.zip And Follow The Directions To install it.
=} Now You Should Be Rooted And CWM Recovery Should Be Installed And You Can Install Custom Rooms.
If This Helped You Dont Forget To Thank,If you Need Help You Can Ask me.In My Later Posts I will Also Post Rooms For Qmobile A65 And MT6572 Devices
Click to expand...
Click to collapse
salam sir.i am also new in xda forum.i would like to tell you that i have also qmobile A65 mt6572.so i want from you that plz upload its cwm recovery.img file plz i am very confused in making its recovery plz
thanks in advance.
Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Procedure to Root Micromax Canvas Fire A093Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:
When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app
NikS Vv said:
When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app
Click to expand...
Click to collapse
Same here what to do ?????
dude just tell me did you test this method?? i tried same method like this on 093 which was made for fire104 n my devices was bricked..so just tell me you tried it or you just copy paste old post?
---------- Post added at 04:32 PM ---------- Previous post was at 04:25 PM ----------
or just make a video for it if you can.thanx
Thnks. Working.
But flash kinguser for proper root access, not supersu.
---------- Post added at 10:53 PM ---------- Previous post was at 10:45 PM ----------
NikS Vv said:
When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app
Click to expand...
Click to collapse
Neelabhushan said:
Same here what to do ?????
Click to expand...
Click to collapse
First Install Vcom driver.
Then do not connect phone to pc first.
Do as mention and then click Download botton. Now connect ur phone ( switched off) to pc and flashing will start in a few seconds.
incorrect scater file
its saying incorrect scater file n also now scater file download link is not working.any suggestions???
Problem in deive connecting
hello i have downloaded all software and i have installed driver but when i switch off my mobile and then connect cable than connecting sound heard twice that means device connected than disconnected please tell me how to connect device properly
I try same but when i click on download and connect mobile in switch off button nothing will happen....
Pls help me to root my mobile
Sent from my Micromax A093 using XDA Free mobile app
Good work bro...hehe...batayabyi nehin!
:laugh:
daoodshah said:
Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
Procedure to Root Micromax Canvas Fire A093Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:
Click to expand...
Click to collapse
Thnx bhai
Can't install cwm
i have installed the driver, the device is recognized as mediatec com port 6 under ports. after selecting the files pressing download most times i get errors and the other times the bar is stuck at 100%. plus every second the phone connects and disconnects. tried formatting, tried pressing up/down/both volume buttons while connecting the phone to pc after pressing download. first time rooting a micromax phone need some help
Error
daoodshah said:
Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
Procedure to Root Micromax Canvas Fire A093Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:
Click to expand...
Click to collapse
It says PMT changed for the device??
aayush.mainali said:
It says PMT changed for the device??
Click to expand...
Click to collapse
I also got the same error.
Hey Guys!
I am back with an awesome mod.
It's logo file of our Xolo Devices! It can be flashed in any MTK 65xx device but due to text on it made this only for HIVE
It's simple just download the zip file and flash it via recovery or via SP Flashtool Load scatter file MT6592, untick everything except for logo.bin and then locate the downloaded logo.bin and hit download button. Switch off your Phone and after it switches off it'll vibrate at that point keep the volume up button pressed and connect phone via PC and wait then you'll see a red bar followed by a yellow bar. After that you'll get a green circle saying succeeded flashing. Disconnect your phone and switch on and Enjoy!
Those who are rooted can flash the update.zip via CWM Recovery. Recovery and rooting guide for Xolo 8x-1000 here : Root Xolo HIVE 8x-1000 Easily.
Those who are unrooted just flash the logo.bin file with SP Flashtool. Latest Version 5.13 preferred. Make sure you have the drivers installed before flashing or PC won't detect the phone. To install drivers follow the guide above or use PdaNet and install it. Make sure to go to turn USB Debugging on during installation of drivers. To activate USB Debugging go to Settings -> Developer Options -> USB Debugging and connect the phone to PC and you'll get a pop-up on phone asking to accept fingerprint from the PC click yes and continue.
Here are the files : Rooted user flash update.zip via CWM Recovery and no need to wipe anything just download->flash->reboot.
Non-Rooted users use logo.bin file and flash via SP Flashtool preferred latest version. Also I am attaching the scatter file for ease.
As alone a developer it takes time and resources to build these files and therefore if you like my work please for sure consider a donation if you can or hit the thanks button as it will keep me encouraged to develop more. Thanks
Will this work on twrp?
Yes it will work with any recovery except stock
Sent from my bobobibi