LATEST KARBONN A9 ROM--- NeutrinoRom^A9
This is 100% working rom for A9. First you need to install custom recovery in your A9 then you can
install This NeutrinoRom^A9. Follow the procedure below to install Custom recovery and NeutrinoRom^A9.......
First download A9CustomRecovery,zip from this link: http://mediafire.com/?gnixgoj7yg5tcvb
and unzip it in a folder on your computer,after unzip you will find root.bat file there, ok we will
come back to root.bat little later.
Now 1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat ( which you have unzip earlier(A9CustomRecovery.zip ))
the downloaded zip file)
4)Your phone will reboot after the process completes.Custom recovery is installed now.
Now follow these step to install NeutrinoRom^A9.zip file. Download Link: http://mediafire.com/?g9b3j8b9vcctvvy
First copy the zip file into memory card and insert the memory card in the phone and boot the phone into
recovery mode by holding VOl up + power button (first you will see green screen then after some time red
screen.When you see the red screen leave the vol up and power buttons. Then 1.Wipe the data factory rest
2.format partition cache 3.select install zip from memory sdcard 4.choose zip from sdcard. It will take about
2-3 minutes to install. After installation go back and reboot the device and its done...Enjoy and give your
feed back...
LATEST KARBONN A9 ROM---> NeutrinoRomV2^A9
http://forum.xda-developers.com/showthread.php?p=33159298#post33159298
Karbonn A9 Rom---NeutrinoEliteRom^K9 Just 91MB size...super lite
http://forum.xda-developers.com/showthread.php?p=33160334#post33160334
Hit thanks if this post helped you.
If you like, you can donate and contribute to the developer luminousin...Keep smiling...
feature and screen shot pls...............
Sounds good, screenshots plz.
No extra feature....
Just stock rom with some apps
luminousin said:
LATEST KARBONN A9 ROM--- NeutrinoRom^A9
This is 100% working rom for A9. First you need to install custom recovery in your A9 then you can
install This NeutrinoRom^A9. Follow the procedure below to install Custom recovery and NeutrinoRom^A9.......
First download A9CustomRecovery,zip from this link: http://mediafire.com/?gnixgoj7yg5tcvb
and unzip it in a folder on your computer,after unzip you will find root.bat file there, ok we will
come back to root.bat little later.
Now 1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat ( which you have unzip earlier(A9CustomRecovery.zip ))
the downloaded zip file)
4)Your phone will reboot after the process completes.Custom recovery is installed now.
Now follow these step to install NeutrinoRom^A9.zip file. Download Link: http://mediafire.com/?g9b3j8b9vcctvvy
First copy the zip file into memory card and insert the memory card in the phone and boot the phone into
recovery mode by holding VOl up + power button (first you will see green screen then after some time red
screen.When you see the red screen leave the vol up and power buttons. Then 1.Wipe the data factory rest
2.format partition cache 3.select install zip from memory sdcard 4.choose zip from sdcard. It will take about
2-3 minutes to install. After installation go back and reboot the device and its done...Enjoy and give your
feed back...
LATEST KARBONN A9 ROM---> NeutrinoRomV2^A9
http://forum.xda-developers.com/showthread.php?p=33159298#post33159298
Karbonn A9 Rom---NeutrinoEliteRom^K9 Just 91MB size...super lite
http://forum.xda-developers.com/showthread.php?p=33160334#post33160334
Hit thanks if this post helped you.
If you like, you can donate and contribute to the developer luminousin...Keep smiling...
Click to expand...
Click to collapse
All downloads are at follwing link....
http://www.filecrop.com/k-9-android.html
enjoy
Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse
Micromax canvas doodle 3 a.k.a A102 was released recently, a budget android phone or phablet. With a Meditek MT6572 processor and Android 4.2.2 stock.
Development thread for a local market phone exists rarely, and that rare thread is created by me[emoji15] .
Prime
Rooting Micromax Canvas Doodle 3 A102 with 1GB RAM Kitkat 4.4.2
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Kindly find the images of SP Flash & the flashed recovery.
It's for reference and guide.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanxxxxxxxx
was very helpfull ,,,,doodle 3 kitkat version root.......................try it,,,, its work for kitkat ota
Rooting Micromax canvas Doodle 3 .....
Friends if anyone is getting difficulty in going to recovery mode using Power+Volume up button
Download adb setup zip file from below and install the adb setup
then
goto Command Prompt and type
adb reboot recovery
your phone will goto recovery mode automatically
then rest is given in above post.
dont forget to ht thanks if helped.
Finaly root
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
thanks bro,
finaly root my doodle 3 updated kitkat 1gb ram
i use below attached scatter file
MIUI ROM for Micromx Canvas A102
Here it Comes
MIUI ROM for Micromax Canvas Doodle 3 with 1GB ram
IS NO MORE WORKING
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
your above steps are not working in my phone a102 ,doodle 3...i had recently upgarded to kitkat 4.4.2 .......none of the methods or rootapps are working for rooting this device
pls sir can you make one video tutorial for rooting this device with the above version of OS...asap
Rooting Micromax canvas Doodle 3 .....
damianlepcha said:
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone
Click to expand...
Click to collapse
Use following Link to Download the latest version of SP flash Tools and retry with the scatter file and recovery image given.
This will let you download recovery to your handset and getting Root.
copy and paste this link to your browser and download .. d-h.st/weue
couldn't reboot into recovery mode from doodle 3
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance
Tapan Arya said:
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance
Click to expand...
Click to collapse
Use Mobileuncle tools or Rebooter app for reboot into recovery mode.
I already used but doesn't works
Tapan Arya said:
I already used but doesn't works
Click to expand...
Click to collapse
If you are rooted then have u installed the CWM provided in Post #2
install using Mobileuncle tools
then root
Dont Forget to Endale USB Debugging mode from developer options
and reboot to recovery from mobile uncle tools.
It should reboot into recovery. if not then tell me what any error is coming ??
Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts
Tapan Arya said:
Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts
Click to expand...
Click to collapse
Just try to reinstall the recovery using mobileuncle tools and then reboot.
Hope it will work
I just tried to and updated recovery from mobile uncle but it shows as before
Please Help apk
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
just copy and paste them in /system/app and change permissions to rw- r-- r-- and reboot
and for camera just restore factory settings if it didnt helped then reflash the stock Rom (System Only) and done.
Dont forget to backup your IMEI before doing anything.
osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
Use ESfile Explorer to Copy it to system folder and change permissions..
Am making this post to solve A120 users problems and anybody can post their questions and i will surely try helping in finding them the solution and fixing the issue
Thanks to @drprateekluthra for suggesting me to make this tutorial
Most of the users dunno how to flash stock roms or change the base and flash clones stock roms n all...
So here is the tutorial to flash wiko stock rom on A120.. u can use this procedure to flash any stock rom on MTK device
1. U need drivers for the phone..
Download from here -> A120 DRIVERS
2. U need SP Flash Tool to flash the rom..
Download from here -> SP flash tools
3. U need Stock SP flashable Rom
Download WIKO Kitkat from here -> WIKO KitKat
4. Install the drivers in your laptop/pc if its windows 7 you wont have any problem but if its windows 8 or 8.1 then follow this tutorial to install drivers -> How to install drivers on windows 8?
5. Extract SP tools and rom.zip in some folder..
6. open Sptools folder and run Flash_tool application and a window will open..
7 Click on Scatter-Loading and go where you have extracted the rom.zip and select the MT6582_Android_scatter.txt or scatterfile.txt
8. Now select Firmware Upgrade and Click on Download Button..
9. Now switch off your phone and take out the battery and connect your device to the laptop/pc via data cable [Make sure USB-Debuggins is on]
10. Wait for few minutes and you will get the stock rom flashed..
11. Disconnect the device and insert the battery and switch on your phone and wait for sometime.. it might take few mins to boot.. so just dont freak out..
12. Its done
Enjoy the rom
So many people asked me to make a tutorial to flash vionicL on wiko base.. So here it is
How To Flash VionicL on any base?
1. Download the Rom from here and Hit thanks -> VionicL original thread
2. Keep the zip in root of your SD card
3. Reboot into Recovery by holding volume up, volume down and power keys together and then press volume up button for recovery mode
4. This will boot into recovery
5. Now go to wipe and format options and wipe Data, Cache & Dalvik Cache
6. Now go back and select install zip from SD then choose zip from storage/sdcard1
7. Select the rom and press yes
8. Now wait for installation and then press back button and select reboot device
9. Sit back and relax it might take few mins so dont freak out
10. Enjoy the ROM
So manyPeople Texted me and asked me how to fix their IMEI problem
How to solve IMEI issue?
Here is a tutorial to fix IMEI problem Follow this -> IMEI FIX
or else folow this tutorial -> IMEI FIX
Anything else? Feel free to post here and ask I will surely try helping you
Post your problems or questions in this post.. I will try replying for every simgle peson
HIT THANKS IF AM HELPING YOU [/CENTER]
Anyone? Having difficulties mounting usb storage in VionicL?
ktsarlz said:
Anyone? Having difficulties mounting usb storage in VionicL?
Click to expand...
Click to collapse
enable usb debugging and connect to laptop and use MTP[media device]
IFlash carliv recovery to Qmobile x35 and replace your stock recovery.
I have ported carliv recovery to qmobile x35 after modifications to use only on qmobile 35 using Carliv's porting guide so don't use on any other device.
First of all make backup of your full rom using mtkdroid tools.
Follow the procedure to flash recovery to your Qmobile x35.
1. Download the recovery_carliv.img and mt6572.txt scatter files attached below.
Rename recovery_carliv.img to recovery.img
2. Download SPflash tool. As the fastboot utility does not work in this device so only use SPflash tool. And download Mtk preloader drivers.
3. Open SPflash tool and go to download tab and then click scatter file to choose scatter file that u downloaded from here. It will load the scatter file in download tab.
4. Now only tick the recovery checkbox and then move your mouse in the same line towards last column and click it.
It will open window to select the recovery file u want to flash.
5. Now select the downloaded recovery.img and press open.
6. Now turn your mobile off and put out the battery
7. Now click download in spflash tools download tab to start flashing.
8. Now plug your data cable to your pc and your fone. It will start downloading.
9. When a green circle appers on your pc screen it means it finished flashing.
10. Now disconnect your data cable from pc and put your battery back to your fone.
11. Now press power button + volume up botton together untill qmobile logo appears and then release the power button but dont release volume up botton untill recovery starts on your fone.
Thats all.
Now do what u want
Credits to Carliv for his files.