Database Info

adrenaline shot HELP DESK PLEASEEE

hello guys new in here....so sorry.....
i have i new 2.3.5 xxkpg samsung galaxy s plus phone...rooted.....which i wish to instal adrenaline shot universal mode v13....or v12?secondly can anyone give me a detailed how to and what do i need to install adrenaline shot?and last one is it going to loose all the programs i installed or the settings or the sd card files???
thanks guys in advance i am waiting for your help...
thanks a lot

http://forum.xda-developers.com/showthread.php?t=1331164

avq said:
http://forum.xda-developers.com/showthread.php?t=1331164
Click to expand...
Click to collapse
thanks about this link but i have already seen that....i ask this thread only because i want it more simply....i was very confused after reading your threading...
thanks thow

dl odin, install cwm then send adrenaline shot to your device, turn it on in recovery mode, then install shot.
"
3. Download FeaMod Recovery v.1.2.
4. Open Odin again and select the AriesVE.ops as the OPS file. Tick the one package option under OPTION. The select the FeaMod file as the One Package file. Flash it! After 10 to 15 secs your device will reboot into your system.
6. Copy the Universal Adrenaline v.13 zip file (download it from here: http://forum.xda-developers.com/show....php?t=1236779) to your internal or external sdcard.
5. Shut your device down and reboot into FeaMod Recovery v.1.2. by holding the Volume up and Power Button simultaneously until the Samsung Logo appears, hold it for 2,3 seconds longer and release both buttons. Welcome to FeaMod zone :-D
6. not important.
7. Go to mount and storage -> mount /system
8. Go to advanced and select fix permissions.
9. Go to install zip from sdcard and select your fresh copy of adrenaline shot v. 13.
10. Reboot into system."
it cannot be simpler. 3,4 minutes and its done.
and nah, you wont lose your data if you do everything correctly.

avq said:
dl odin, install cwm then send adrenaline shot to your device, turn it on in recovery mode, then install shot.
"
3. Download FeaMod Recovery v.1.2.
4. Open Odin again and select the AriesVE.ops as the OPS file. Tick the one package option under OPTION. The select the FeaMod file as the One Package file. Flash it! After 10 to 15 secs your device will reboot into your system.
6. Copy the Universal Adrenaline v.13 zip file (download it from here: http://forum.xda-developers.com/show....php?t=1236779) to your internal or external sdcard.
5. Shut your device down and reboot into FeaMod Recovery v.1.2. by holding the Volume up and Power Button simultaneously until the Samsung Logo appears, hold it for 2,3 seconds longer and release both buttons. Welcome to FeaMod zone :-D
6. not important.
7. Go to mount and storage -> mount /system
8. Go to advanced and select fix permissions.
9. Go to install zip from sdcard and select your fresh copy of adrenaline shot v. 13.
10. Reboot into system."
it cannot be simpler. 3,4 minutes and its done.
and nah, you wont lose your data if you do everything correctly.
Click to expand...
Click to collapse
sorry if i am stupid but i will not loose root or everything else?
thanks for your patience

nope, root and data will be untouched.

you were right trully fast and the phone is very smooth and smuch memory and stable...thanks....if you want to remove it how can you remove it?

reflash current rom or if you have a backup( point 6 was skipped though ) then load it by cwm.

Root and CWM Hisense HS-EG909 / AD683G

I just wanna share
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below)
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
Press (Power + Volume Down) to entry CWM Recovery (Install from CWM)
5. Choose apply update from external storage in the option menu (Install From Stock Recovery)
Choose Install zip from sdcard (Install from CWM)
6. Find a CWM file was downloaded earlier then reboot (Install From Stock Recovery and Install from CWM)
Installation Root
1. Download SuperSU
2. Connect your USB to your phone then copy superuser file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery
5. Choose Install zip from sdcard then choose zip
6. Find a superuser file was downloaded earlier then reboot

thanks for sharing:good:

Tutorial fixed
Tried this several times and comes with nothing, I followed tutorial really carefully. The install process through stock recovery running and it said finished, but when I tried to reboot again the CWM Recovery not installed. And then I figure out that the tutorial uncompleted.
So here it is the fixed Tutorial for Root and CWM Hisense HS-EG909 / AD683G
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below), remember theres is two type of CWM Recovery. One is a CWM/CWM Touch Recovery, and others is CWM Recovery-Temporary
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file (both of them :CWM-6.0.2.3.zip and CWM-6.0.2.3-temp.zip)
from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry Stock Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
5. Still in Stock Recovery choose apply update from external storage in the option menu, install CWM-6.0.2.3-temp.zip.
In this state you are in CMW temporary condition, your screen will flicker often but it is okay because this just temporary. You can use volume "up+down" to navigate, "home" for menu and "search" for select.
6. Find a CWM-6.0.2.3.zip file and then install.
7. After it to makesure you can choose Advanced/Reboot into recovery mode. And your device should be reboot into CWM Recovery "Permanent Mode", your screen will not flicker again.
Sorry if this bother TS, I just hope if theres another person see this tutorial so they would not confuse like I did.

[Recovery+Backup+Root] Walton Primo C1

Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.

device stock in clockword recovery 6.3.0.6 and donot open

i tried Installing CWM Recovery on my CALAXY CORE I8262 and when i press Volume up +Home Key +Power Key the phone
shaking and not go to CWM Recovery it bootup the system and when press Volume down +Home Key +Power Key it asked me to continue press volume up and when do it bootup to the system again then i go to setting backup and reset i press restore factory it the phone reboot and show clockword recovery 6.3.0.6 i press factory rest then rebot the phone it open again in clockwork recovery and i choose install zip from sd card i have cusom rom in sdcard and the system dont show me the rom in the sdcard then i out sdcard and try it in onther phone and the cusom Rom is already there and when i put it back and press install zip from sd card it don't detect card and show me 0 and clochwash and, odin and kies don't reconzgines it and arealady install samsung driver to computer please help me

If you are installing stock rom then
1. Switch off your phone.
2. Boot it in DOWNLOAD mode not in (CWM Recovery mod). You can so by pressing VOLUME DOWN + HOME + POWER BUTTON.
3. Then connect it to PC using USB cable.
4. Place the downloaded stock ROM in ODIN folder and open up ODIN.exe file (it will detect your phone in few seconds but if it doesn't detect then install samsung drivers and try again).
5. Then click on PDA button and choose PDA button. REMEMBER to uncheck REPARTITION.
6. Final click on START button wait for the flashing to get completed.
-------------------------------------------------------------------------
II ) if you are installing custom ROM through CWM Recovery then keep the custom ROM in root folder of SD card it means just in the location that you see just after opening the SD card on PC. Don't place it in any folder.
More over if you are flashing the new Cathezilla ROM then don't do it right now because it is not working right now. Wait for the developer and others to test.

You will have to flash stock rom through ODIN
Sent from my GT-I8262 using XDA Premium 4 mobile app

thanx thanx thanx thanx thanx thanx thanx thanx bro it work thanx very much

A quick guide

Hey guys I'm having some problems installing a ROM properly every time something is messsing up, so if can anyone give me a guide on how to install a ROM that will be great.
Iv'e tried google it but the guides are messed up

Nothing wrong with any guides online, but let's begin
Pre-steps:
1) Make sure you have a custom recovery http://teamw.in/project/twrp2/205
2) Download the ROM you want from its thread
3) Download Gapps if you want them http://forum.xda-developers.com/showthread.php?t=2397942
4) If the ROM's thread doesn't say it has root built-in, download SuperSU http://download.chainfire.eu/635/SuperSU/UPDATE-SuperSU-v2.36.zip
5) Move the files to your phone if they aren't there already
The flashing steps:
1) Power off your phone
2) Hold power and volume down buttons down until it boots to bootloader
3) Press volume down until you see the text that says recovery
4) Press power button, it will now boot to your recovery
5) Press the big button that says wipe and swipe to factory reset
6) Go back to the recovery start screen
7) Press install
8) Find the files you downloaded earlier and flash them in this order: ROM --> Gapps --> SU
9) Wait while it does its thing
10) Press the button that says reboot system
11) The device will boot and you have just flashed your ROM!